TC58 Touch Computer Quick Start Guide

MN-004399-01EN Rev A

Zebra Technologies Corporation

Zebra TC58 Mobile Computer Quick Start Guide MN-004399-01EN Rev A

Zebra TC53 TC58 Datasheet Repair Fix Factory Reset Buy

tc58-qsg-en

tc58-qsg-en | BIAS Technology Support Ltd

[PDF] TC58 Touch Computer Quick Start Guide - BIAS Technology Supportwww.biastechnology.com › 2022/10

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 22 Pages, 863.17KB

Document DEVICE REPORTtc58-qsg-en
TC58 Touch Computer
Quick Start Guide
MN-004399-01EN Rev A

Copyright
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. ©2022 Zebra Technologies Corporation and/or its affiliates. All rights reserved. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements. For further information regarding legal and proprietary statements, please go to: SOFTWARE: zebra.com/linkoslegal. COPYRIGHTS: zebra.com/copyright. WARRANTY: zebra.com/warranty. END USER LICENSE AGREEMENT: zebra.com/eula.
Terms of Use
Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries ("Zebra Technologies"). It is intended solely for the information and use of parties operating and maintaining the equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for any other purpose without the express, written permission of Zebra Technologies.
Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are subject to change without notice.
Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and disclaims liability resulting therefrom.
Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the accompanying product (including hardware and software) be liable for any damages whatsoever (including, without limitation, consequential damages including loss of business profits, business interruption, or loss of business information) arising out of the use of, the results of use of, or inability to use such product, even if Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

TC58 Touch Computer Quick Start Guide

Features
This section lists the features of the TC58 touch computer. Figure 1 Front and Side Views

2

3 45

1

10

9

6

7

8

Table 1 TC58 Front View

Number

Item

Description

1

Front camera 8MP Takes photos and videos.

2

Scan LED

Indicates data capture status.

3

Receiver

Use for audio playback in Handset mode.

4

Proximity/light

Determines proximity and ambient light for controlling display backlight

sensor

intensity.

3

TC58 Touch Computer Quick Start Guide

Table 1 TC58 Front View (Continued)

Number

Item

Description

5

Battery status LED Indicates battery charging status while charging and application generated

notifications.

6, 9 Scan button

Initiates data capture (programmable).

7

Volume up/down Increase and decrease audio volume (programmable).

button

8

6 in. LCD touch Displays all information needed to operate the device.

screen

10

PTT button

Typically used for PTT communications. Where regulatory restrictions exist1, button is configurable for use with other applications.

1Pakistan, Qatar

Figure 2 Back, Top, and Bottom View

4

TC58 Touch Computer Quick Start Guide

Table 2 TC58 Rear View

Number

Item

Description

1

Power button Turns the display on and off. Press and hold to reset the device, power off or

swap battery.

2, 4, 9 Microphone

Use for noise cancellation.

3

Back common Provides host communications, audio and device charging via cables and

I/O 8 pins

accessories.

5

Battery release Pinch both latches in and lift up to remove the battery.

latches

6

Battery

Provides power to the device.

7

Speaker

Provides audio output for video and music playback. Provides audio in speakerphone mode.

8

DC input pins Power/ground for charging (5V through 9V).

10

USB Type C

Provides power to the device using I/O USB-C interface with 2 charge pins.

and 2 charge

pins

11

Hand strap

Attachment points for the hand strap.

attachment

points

12

ToF module

Employs time of flight techniques to resolve distance between the camera

and subject (premium configurations only).

13

16 MP rear

Takes photos and videos with flash to provide illumination for the camera.

camera with

flash

Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the battery pack. Refer to the documentation provided with the card for more information, and follow the manufacturer's recommendations for use.
CAUTION--ESD: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.

5

TC58 Touch Computer Quick Start Guide
1. Lift the access door. 2. Slide the microSD card holder to the Open position. 3. Lift the microSD card holder door.
6

TC58 Touch Computer Quick Start Guide
4. Insert the microSD card into the card holder ensuring that the card slides into the holding tabs on each side of the door.
5. Close the microSD card holder door.
7

TC58 Touch Computer Quick Start Guide
6. Slide the microSD card holder door to the Lock position.
NOTE: Access door must be replaced and securely seated to ensure proper device sealing. 7. Re-install the access door.
Installing the SIM Card
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring the operator is properly grounded.
8

TC58 Touch Computer Quick Start Guide
1. Remove the access cover. 2. Slide the SIM card holder to the unlock position.
3. Lift the SIM card holder door.
9

TC58 Touch Computer Quick Start Guide
4. Place the SIM card into the card holder with contacts facing down. 5. Close the SIM card holder door.
10

TC58 Touch Computer Quick Start Guide
6. Slide to SIM card holder door to the lock position.
NOTE: Access door must be replaced and securely seated to ensure proper device sealing. 7. Re-install the access door.
Installing the Battery
This section describes how to install the battery into the device. NOTE: User modification of the device, particularly in the battery well, such as labels, asset tags, engravings, stickers, etc., may compromise the intended performance of the device or accessories. Performance levels such as sealing (Ingress Protection (IP)), impact performance (drop and tumble), functionality, temperature resistance, etc. could be affected. DO NOT put any labels, asset tags, engravings, stickers, etc. in the battery well. 1. Insert the battery, bottom first, into the battery compartment in the back of the device.
11

TC58 Touch Computer Quick Start Guide
2. Press the battery down until it snaps into place.

Using the Rechargeable Li-Ion Battery with BLE Beacon
This device utilizes a rechargeable Li-Ion battery to facilitate BLE Beacon. Once enabled, the battery transmits a BLE signal for up to seven days while the device is powered off due to battery depletion.
NOTE: The device transmits a Bluetooth beacon only when the device is powered off or in Airplane Mode. For additional information on configuring the Secondary BLE settings, see techdocs.zebra.com/emdk-forandroid/11/mx/beaconmgr.
Charging the Spare Battery
This section provides information on charging a spare battery. 1. Insert a spare battery into the spare battery slot. 2. Ensure the battery is seated properly. The Spare Battery Charging LED blinks indicating charging. See
Charging Indications on page 12 for charging indicators. The battery charges from fully depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in approximately 3.5 hours. In many cases the 90% charge provides plenty of charge for daily use. Depending on the usage profile, a full 100% charge lasts for approximately 14 hours of use. To achieve the best charging results use only Zebra charging accessories and batteries.
Charging Indications
The charging/notification LED indicates charging status.

Table 3 Charging/Notification LED Charging Indicators

State

LED

Indications

Off

Device is not charging. Device is not inserted correctly in the

cradle or connected to a power source. Charger/cradle is not

powered.

12

TC58 Touch Computer Quick Start Guide

Table 3 Charging/Notification LED Charging Indicators (Continued)

State

LED

Indications

Slow Blinking Amber
(1 blink every 4 seconds)

Device is charging.

Slow Blinking Red
(1 blink every 4 seconds)

Device is charging but the battery is at end of useful life.

Solid Green

Charging complete.

Solid Red

Charging complete but the battery is at end of useful life.

Fast Blinking Amber (2 blinks/second)
Fast Blinking Red (2 blinks/second)

Charging error, e.g.: · Temperature is too low or too high. · Charging has gone on too long without completion (typically
twelve hours).
Charging error but the battery is at end of useful life., e.g.: · Temperature is too low or too high. · Charging has gone on too long without completion (typically
twelve hours).

Charging

Use one of the following accessories to charge the device and/or spare battery.

Charging and Communication

Description
1-Slot USB/Charge Only Cradle Kit 1 -Slot USB/Ethernet Cradle Kit 5-Slot Charge Only Cradle with Battery Kit 5-Slot Charge Only Cradle Kit 5-Slot Ethernet Cradle Kit Charge/USB Cable

Part Number
CRD-NGTC5-2SC1B CRD-NGTC5-2SE1B CRD-NGTC5-5SC4B CRD-NGTC5-5SC5D CRD-NGTC5-5SE5D CBL-TC5XUSBC2A-01

Charging

Communication

Battery (In
device)

Spare USB Battery

Ethernet

Yes

Yes

No No

Yes

Yes

Yes Yes

Yes

Yes

No No

Yes

No

No No

Yes

No

No Yes

Yes

No

Yes No

13

TC58 Touch Computer Quick Start Guide
Charging the Device
This section provides information for charging the device.
NOTE: Ensure that you follow the guidelines for battery safety described in the TC53/TC58 Product Reference Guide.
1. To charge the main battery, connect the charging accessory to the appropriate power source. 2. Insert the device into a cradle or attach to a cable. The device turns on and begins charging. The
Charging/Notification LED blinks amber while charging, then turns solid green when fully charged. The standard battery charges from fully depleted to 90% in approximately two hours and from fully depleted to 100% in approximately three hours. In many cases the 90% charge provides plenty of charge for daily use. Depending on usage profile, a full 100% charge lasts for approximately 14 hours of use. To achieve the best charging results use only Zebra charging accessories and batteries. Charge batteries at room temperature with the device in sleep mode.
2-Slot (1 Device/1 Spare Battery) USB Charging Cradle

1

Spare battery charging slot

2

Power LED

3

Device charging slot with shim

4

DC power supply

5

AC line cord

14

TC58 Touch Computer Quick Start Guide
2-Slot (1 Device/1 Spare Battery) Ethernet and Communication Setup

1

AC line cord

2

Host computer

3

USB to Ethernet module kit (sold separately)

4

USB port (on USB to Ethernet module kit)

5

Ethernet port (on USB to Ethernet module kit)

6

Host computer

7

Ethernet switch

NOTE: The USB to Ethernet module kit (KT-TC51-ETH1-01) connects via a single-slot USB charger.

15

TC58 Touch Computer Quick Start Guide
5-Slot Charge Only Cradle

1

Device charging slot with shim

2

Power LED

3

DC power supply

4

AC line cord

16

TC58 Touch Computer Quick Start Guide
5-Slot Ethernet Cradle Setup
1

3

2

1

Ethernet switch

2

DC power supply

3

Ethernet port

17

TC58 Touch Computer Quick Start Guide
5-Slot (4 Device/4 Spare Battery) Charge Only Cradle with Battery Charger

1

Device charging slot with shim

2

Spare battery charging slot

3

Spare battery charging LED

4

Power LED

5

DC power supply

6

AC line cord

18

TC58 Touch Computer Quick Start Guide
Charge/USB-C Cable
Scanning
To read a barcode, a scan-enabled application is required. The device contains the DataWedge application that allows the user to enable the imager, decode the barcode data and display the barcode content. NOTE: The SE55 displays the green dash-dot-dash aimer. The SE4720 imager displays a red dot aimer. 1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field). 2. Point the exit window on the top of the device at a barcode.
19

TC58 Touch Computer Quick Start Guide
3. Press and hold the scan button. To assist in aiming, the red LED aiming pattern and red aiming dot turn on for the SE4720 and the green LED aiming pattern and green dash-dot-dash turn on for the SE55.
NOTE: When the device is in Picklist mode, the imager does not decode the barcode until the crosshair or aiming dot touches the barcode. 4. Ensure the barcode is within the area formed in the aiming pattern. The aiming dot is used for increased
visibility in bright lighting conditions. Figure 3 Aiming Pattern
Figure 4 Pick List Mode with Multiple Barcodes in Aiming Pattern
5. The Data Capture LED lights green and a beep sounds, by default, to indicate the barcode was decoded successfully.
6. Release the scan button. NOTE: Imager decoding usually occurs instantaneously. The device repeats the steps required to take a digital picture (image) of a poor or difficult barcode as long as the scan button remains pressed. 7. The barcode content data displays in the text field.
20

TC58 Touch Computer Quick Start Guide
Ergonomic Considerations
21

www.zebra.com



References

Apache FOP Version 2.3

Search Any Device: