FCC 20220629 John
EMC
Test Report SAR
Framework Computer Inc FRANBBAT10 Intel Wi-Fi 6E AX211 2AZR6-FRANBBAT10 2AZR6FRANBBAT10 franbbat10
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 91 Pages, 2.16MB
Document DEVICE REPORTGetApplicationAttachment.html?id=6153217Report No.: TESA2207000203EN Page: 1 of 91 RF Exposure report The following samples were submitted and identified on behalf of the client as: Product Name Portable Computer Brand Name Framework Model No. FRANPC0000 Applicant Framewok Computer Inc 447 Sutter St, PMB 135, San Francisco, CA, 94108-4618, United States Standards IEEE/ANSI C95.1-1992, IEEE 1528-2013 FCC ID 2AZR6-FRANBBAT10 Date of EUT Receipt Jul. 15, 2022 Date of Test(s) Aug. 07, 2022 ~ Aug. 12, 2022 Date of Issue Sep. 20, 2022 In the configuration tested, the EUT complied with the standards specified above. Remarks: This report details the results of the testing carried out on one sample, the results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS Taiwan Ltd. Central RF Lab or testing done by SGS Taiwan Ltd. Central RF Lab in connection with distribution or use of the product described in this report must be approved by SGS Taiwan Ltd. Central RF Lab in writing. Signed on behalf of SGS Clerk / Ruby Ou PM / Jasper Wang Approved By / John Yeh Date: Sep. 20, 2022 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 2 of 91 Revision History Report Number TESA2207000203EN TESA2207000203EN TESA2207000203EN Revision 00 01 02 Description Initial creation of document Modify applicant's address Modify gain and co-sar Issue Date Aug. 19, 2022 Sep. 13, 2022 Sep. 20, 2022 Revised By Ruby Ou Ruby Ou Ruby Ou Remark * * Note: 1. The mark " * " is the revised version of the report due to comments submitted by the certification. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 3 of 91 Contents 1 GENERAL INFORMATION ......................................................................................... 5 1.1 Test Methodology ................................................................................................ 5 1.2 Description of EUT............................................................................................... 6 1.3 Maximum value .................................................................................................... 7 1.4 Antenna Information ............................................................................................ 7 2 MEASUREMENT SYSTEM ......................................................................................... 8 2.1 Test Facility .......................................................................................................... 8 2.2 SAR System ......................................................................................................... 9 2.3 PD system ...........................................................................................................13 3 SAR SYSTEM VERIFICATION...................................................................................15 3.1 Tissue Simulating Liquid....................................................................................15 3.2 Tissue Simulant Liquid measurement ..............................................................15 3.3 Measurement results of Tissue Simulant Liquid..............................................16 3.4 The composition of the tissue simulating liquid:.............................................17 3.5 System check ......................................................................................................17 3.6 System check results .........................................................................................18 4 PD SYSTEM VERIFICATION .....................................................................................19 4.1 System check ......................................................................................................19 4.2 System check result ...........................................................................................20 5 TEST CONFIGURATIONS .........................................................................................21 5.1 Test Environment ................................................................................................21 5.2 Test Note..............................................................................................................21 5.3 Test position........................................................................................................23 5.4 Test limit ..............................................................................................................24 6 Maximum OUTPUT POWER .....................................................................................27 6.1 WLAN ...................................................................................................................27 6.2 WIFI 6E .................................................................................................................34 6.3 Bluetooth .............................................................................................................38 6.4 BLE.......................................................................................................................38 7 SUMMARY OF RESULTS ..........................................................................................44 7.1 Decision rules .....................................................................................................44 7.2 Summary of SAR Results...................................................................................44 7.3 Summary of PD Results .....................................................................................46 7.4 Reporting statements of conformity .................................................................46 7.5 Conclusion ..........................................................................................................46 8 SIMULTANEOUS TRANSMISSION ANALYSIS.........................................................47 8.1 Simultaneous Transmission Scenarios: ...........................................................47 8.2 Estimated SAR calculation ................................................................................48 8.3 SPLSR evaluation and analysis.........................................................................48 8.4 Conclusion ..........................................................................................................50 9 INSTRUMENTS LIST .................................................................................................51 10 UNCERTAINTY BUDGET.......................................................................................53 11 SAR MEASUREMENT results ...............................................................................57 12 SAR SYSTEM check results .................................................................................88 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 4 of 91 13 pd system check result.........................................................................................90 14 APPENDIXES .........................................................................................................91 14.1 SAR_Appendix A Photographs .....................................................................91 14.2 SAR_Appendix B DAE & Probe Cal. Certificate ..........................................91 14.3 SAR_Appendix C Phantom Description & Dipole Cal. Certificate .............91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 5 of 91 1 GENERAL INFORMATION 1.1 Test Methodology The SAR testing method and procedure for this device is in accordance with the following standards: IEEE/ANSI C95.1-1992 IEEE 1528-2013 KDB447498D01v06 KDB865664D01v01r04 KDB865664D02v01r02 KDB248227D01v02r01 IEC/IEEE 62209-1528:2020 SPEAG DASY6 System Handbook SPEAG DASY6 Application Note (Interim Procedure for Device Operation at 6GHz-10GHz) IEC TR 63170:2018 IEC 62479:2010 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 6 of 91 1.2 Description of EUT Product Name Brand Name Model No. FCC ID Integrated WLAN Module Mode Duty Cycle Supported radios (TX Frequency Range, MHz) Portable Computer Framework FRANPC0000 2AZR6-FRANBBAT10 Brand Name: Intel® Wi-Fi 6E AX211 Model Name: AX211NGW WLAN: 802.11a/b/g/n/ac/ax HT20/HT40/VHT20/VHT40/VHT80/VHT160/HE20/HE40/HE80/ HE160 Bluetooth BR/EDR/LE WLAN802.11 Please refer to page 40-44 Bluetooth 77.0% 802.11 b/g/n/ax 802.11a/n/ac/ax 802.11ax Bluetooth 5.2 2.4GHz (2400.0 2483.5 MHz) 5.2GHz (5150.0 5350.0 MHz) 5.6GHz (5470.0 5725.0 MHz) 5.8GHz (5725.0 5850.0 MHz) 6.2GHz (5925.0 6425.0 MHz) 6.5GHz (6425.0 6525.0 MHz) 6.7GHz (6525.0 6875.0 MHz) 7.0GHz (6875.0 7125.0 MHz) 2.4GHz (2400.0 2483.5 MHz) Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 7 of 91 1.3 Maximum value Summary of Maximum SAR and Power Density Value Mode Highest SAR 1g Body (W/kg) Highest APD (W/m^2) Bluetooth(GFSK) 0.04 N/A 2.4G WLAN 0.49 N/A 5G WLAN 0.97 N/A 6G WLAN 0.37 2.58 Highest PD (W/m^2) N/A N/A N/A 6.49 1.4 Antenna Information Laptop mode_WLAN Vendor Antenna Part Number Frequency(MHz) 2400~2500 Gain (dBi) 2.72 5150~5250 1.31 5250~5350 1.17 Main AYF6Y-200005(DC33002SE00) 5470~5725 5725~5850 5925~6425 1.03 0.88 0.87 6425~6525 0.81 6525~6875 0.92 AWAN 6875~7125 2400~2500 0.91 1.62 Note: Antenna information is provided by the applicant. 5150~5250 1.67 5250~5350 1.76 Aux AYF6Y-200005(DC33002SE00) 5470~5725 5725~5850 5925~6425 0.36 2.30 2.34 6425~6525 0.10 6525~6875 0.08 6875~7125 0.13 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 8 of 91 2 MEASUREMENT SYSTEM 2.1 Test Facility Laboratory Test Site Address 1F, No. 8, Alley 15, Lane 120, Sec. 1, NeiHu Road, Neihu District, Taipei City, 11493, Taiwan. Test Site Name SAR 2 SAR 6 FCC Designation number TW0029 IC CAB identifier SGS Taiwan Ltd. No. 2, Keji 1st Rd., Guishan Central RF Lab. Township, Taoyuan County, (TAF code 3702) 33383, Taiwan SAR 1 SAR 4 TW0028 TW3702 No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan SAR 3 SAR 7 TW0027 Note: Test site name is remarked on the equipment list in each section of this report as an indication where measurements occurred in specific test site and address. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 9 of 91 2.2 SAR System Block Diagram (DASY5) A block diagram of the SAR measurement System is given in below. This SAR measurement system uses a computer-controlled 3-D stepper motor system (SPEAG DASY 5 professional system). The model EX3DV4 field probe is used to determine the internal electric fields. The SAR can be obtained from the equation SAR= (|Ei|2)/ where and are the conductivity and mass density of the tissue-simulant. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 10 of 91 Block Diagram (DASY6) The DASY system used for performing compliance tests consists of the following items: A standard high precision 6-axis robot with controller, teach pendant and software. An arm extension for accommodating the data acquisition electronics (DAE). An isotropic field probe optimized and calibrated for the targeted measurement. A data acquisition electronics (DAE) which performs the signal amplification, signal multiplexing, AD-conversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is battery powered with standard or rechargeable batteries. The signal is optically transmitted to the EOC. The Electro-optical converter (EOC) performs the conversion from optical to electrical signals for the digital communication to the DAE. To use optical surface detection, a special version of the EOC is required. The EOC signal is transmitted to the measurement server. The function of the measurement server is to perform the time critical tasks such as signal filtering, control of the robot operation and fast movement interrupts. The Light Beam used is for probe alignment. This improves the (absolute) accuracy of the probe positioning. A computer running Windows 10 and the DASY6 software. Remote control and teach pendant as well as additional circuitry for robot safety such as warning lamps, etc. The phantom, the device holder and other accessories according to the targeted measurement. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 11 of 91 EX3DV4 E-Field Probe Construction Symmetrical design with triangular core Built-in shielding against static charges PEEK enclosure material (resistant to organic solvents, e.g., DGBE) Calibration Basic Broad Band Calibration in air Conversion Factors (CF) for HSL 2450/5250/5600/5750/6500/7000 MHz Additional CF for other liquids and frequencies upon request Frequency 10 MHz to > 6 GHz Directivity ± 0.3 dB in HSL (rotation around probe axis) ± 0.5 dB in tissue material (rotation normal to probe axis) Dynamic 10 µW/g to > 100 mW/g Range Linearity: ± 0.2 dB (noise: typically < 1 µW/g) Dimensions Tip diameter: 2.5 mm Application High precision dosimetric measurements in any exposure scenario (e.g., very strong gradient fields). Only probe which enables compliance testing for frequencies up to 6 GHz with precision of better 30%. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 12 of 91 PHANTOM (ELI) Model ELI Construction The ELI phantom is used for compliance testing of handheld and body- mounted wireless devices in the frequency range of 30 MHz to 6 GHz. ELI is fully compatible with the IEC 62209-2 standard and all known tissue simulating liquids. ELI has been optimized regarding its performance and can be integrated into our standard phantom tables. A cover prevents evaporation of the liquid. Reference markings on the phantom allow installation of the complete setup, including all predefined phantom positions and measurement grids, by teaching three points. The phantom is compatible with all SPEAG dosimetric probes and dipoles. Shell 2 ± 0.2 mm Thickness Filling Volume Approx. 30 liters Dimensions Major axis: 600 mm Minor axis: 400 mm DEVICE HOLDER (ELI) Construction The device holder (Supporter) for Notebook is made by POM (polyoxymethylene resin ) , which is non-metal and non-conductive. The height can be adjusted to fit varies kind of notebooks. Device Holder Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 13 of 91 2.3 PD system Block Diagram (DASY6) Power density measurements for mmWave frequencies were performed using SPEAG DASY6 with cDASY6 5G module. The DASY6 included a high precision robotics system (Staubli), robot controller, desktop computer, near-field probe, probe alignment sensor, and the 5G phantom cover. EUmmWVx probe The EUmmWVx probe is based on the pseudo-vector probe design, which not only measures the field magnitude but also derives its polarization ellipse. The design entails two small 0.8mm dipole sensors mechanically protected by high-density foam, printed on both sides of a 0.9mm wide and 0.12mm thick glass substrate. The body of the probe is specifically constructed to minimize distortion by the scattered fields. The probe consist of two sensors with different angles (1 and 2) arranged in the same plane in the probe axis. Three or more measurements of the two sensors are taken for different probe rotational angles to derive the amplitude and polarization information. The probe design allows measurements at distances as small as 2mm from the sensors to the surface of the device under test (DUT). The typical sensor to probe tip distance is 1.5 mm. The exact distance is calibrated. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Frequency Range Dynamic Range Position Precision Dimensions Applications Report No.: TESA2207000203EN Page: 14 of 91 Two dipoles optimally arranged to obtain pseudovector information.Minimum 3 measurements/ point, 120º rotated around probe axis. Sensors (0.8mm length) printed on glass substrate protected by high density foam.Low perturbation of the measured field. Requires positioner which can do accurate probe rotation. 750 MHz 110 GHz < 20 V/m 10,000 V/m with PRE-10 (min < 50 V/m - 3000 V/m) < 0.2 mm (DASY6) Overall length: 337 mm (tip: 20 mm) Tip diameter: encapsulation 8 mm (internal sensor < 1mm) Distance from probe tip to dipole centers: < 2 mm. Sensor displacement to probe's calibration point: < 0.3 mm E-field measurements of 5G devices and other mm-wave transmitters operating above 10GHz in < 2 mm distance from device (free-space).Power density, H-field and far-field analysis using total field reconstruction (cDASY6 5G module required) Compatibility cDASY6 + 5G-Module SW1.0 and higher mmWave Phantom The mmWave Phantom approximates free-space conditions, allowing for the evaluation of the antenna side of the device and the front (screen) side or any opposite-radiating side of wireless devices operating above 10 GHz without distorting the RF field. It consists of a 40mm thick Rohacell plate used as a test bed, which has a loss tangent (tan) 0.05 and a relative permittivity (r) 1.2. High-performance RF absorbers are placed below the foam. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 15 of 91 3 SAR SYSTEM VERIFICATION 3.1 Tissue Simulating Liquid For the measurement of the field distribution inside the SAM phantom with DASY, the phantom must be filled with homogeneous tissue simulating liquid. For head SAR testing, the liquid height from the ear reference point (ERP) of the phantom to the liquid top surface is larger than 15cm. For body SAR testing, the liquid height from the center of the flat phantom to the liquid top surface is larger than 15cm. 3.2 Tissue Simulant Liquid measurement The dielectric properties for this Head-simulant fluid were measured by using the SPEAG Dielectric Assessment Kit (DAKS-3.5) All dielectric parameters of tissue simulates were measured within 24 hours of SAR measurements. The measured conductivity and permittivity are all within ± 5% of the target values. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 16 of 91 3.3 Measurement results of Tissue Simulant Liquid Tissue Type Head Measurement Date Aug, 07. 2022 Aug, 08. 2022 Aug, 09. 2022 Aug, 10. 2022 Measured Frequency (MHz) 2402 2412 2437 2441 2450 2462 2480 5190 5210 5230 5250 5270 5290 5310 5530 5600 5610 5670 5690 5710 5750 5755 5775 5795 6025 6185 6345 6500 6505 6665 6825 6985 7000 Target Dielectric Constant, r 39.282 39.265 39.222 39.215 39.200 39.184 39.160 36.010 35.990 35.970 35.950 35.930 35.910 35.890 35.605 35.500 35.490 35.430 35.410 35.390 35.350 35.345 35.325 35.305 35.070 34.878 34.686 34.500 34.494 34.302 34.110 33.918 33.900 Target Conductivity, (S/m) 1.757 1.766 1.788 1.792 1.800 1.813 1.832 4.650 4.670 4.690 4.710 4.730 4.750 4.770 4.997 5.070 5.080 5.140 5.160 5.180 5.220 5.225 5.245 5.265 5.510 5.698 5.887 6.070 6.076 6.261 6.447 6.633 6.650 Measured Dielectric Constant, r 39.174 39.157 39.112 39.105 39.089 39.074 39.051 35.886 35.863 35.840 35.818 35.795 35.772 35.749 35.772 35.418 35.406 35.338 35.315 35.292 35.246 35.240 35.218 35.195 34.930 34.738 34.546 34.360 34.354 34.162 33.970 33.778 33.760 Measured Conductivity, (S/m) 1.791 1.800 1.821 1.825 1.833 1.843 1.860 4.659 4.679 4.700 4.720 4.741 4.762 4.782 5.010 5.081 5.091 5.153 5.173 5.194 5.235 5.240 5.261 5.281 5.519 5.686 5.854 6.017 6.023 6.193 6.364 6.536 6.552 % dev r % dev -0.28% -0.28% -0.28% -0.28% -0.28% -0.28% -0.28% -0.34% -0.35% -0.36% -0.37% -0.38% -0.38% -0.39% 0.47% -0.23% -0.24% -0.26% -0.27% -0.28% -0.29% -0.30% -0.30% -0.31% -0.40% -0.40% -0.40% -0.41% -0.41% -0.41% -0.41% -0.41% -0.41% 1.91% 1.91% 1.82% 1.84% 1.83% 1.67% 1.53% 0.20% 0.19% 0.21% 0.21% 0.23% 0.25% 0.25% 0.27% 0.22% 0.22% 0.25% 0.25% 0.27% 0.29% 0.29% 0.31% 0.30% 0.17% -0.22% -0.56% -0.87% -0.87% -1.09% -1.29% -1.46% -1.47% Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 17 of 91 3.4 The composition of the tissue simulating liquid: Simulating Liquids for 600 MHz -10 GHz, Manufactured by SPEAG: Broad-band head tissue simulating liquids SPEAG Product HBBL60010000V6 Frequency range (MHz) 600 - 10000 Main Ingredients Water, Oil 3.5 System check The microwave circuit arrangement for system check is sketched in below. The daily system accuracy verification occurs within the flat section of the SAM phantom and ELI phantom. A SAR measurement was performed to see if the measured SAR was within +/- 10% from the target SAR values. The tests were conducted on the same days as the measurement of the DUT. The obtained results from the system accuracy verification are displayed with SAR values normalized to 1W forward power delivered to the dipole. During the tests, the liquid depth from the center of the flat phantom to the liquid top surface was 15 cm above in all the cases. It is seen that the system is operating within its specification, as the results are within acceptable tolerance of the reference values. The block diagram of system check Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 18 of 91 3.6 System check results Validation Kit S/N D2450V2 727 Validation Kit S/N D5GHzV2 D5GHzV2 D5GHzV2 1023 1023 1023 Frequency (MHz) 1W Target 1g-SAR (W/kg) 2450 52.8 Frequency (MHz) 1W Target 1g-SAR (W/kg) 5250 5600 5750 81 84.4 81 pin=250m W Meas ured 1g-SAR (W/kg) 12.6 pin=100m W Meas ured 1g-SAR (W/kg) 8.12 8.04 8.1 Normalized to 1W 1g-SAR (W/kg) Deviation (%) 50.4 -4.55 Normalized to 1W 1g-SAR (W/kg) Deviation (%) 81.2 0.25 80.4 -4.74 81 0.00 Limit ± 10% Limit ± 10% ± 10% ± 10% Meas urem ent Date Aug.07,2022 Meas urem ent Date Aug.08,2022 Aug.08,2022 Aug.08,2022 Validation Kit S/N D6.5GHzV2 D7GHzV2 1006 1007 Frequency (MHz) 6500 7000 1W Target 1g-SAR (W/kg) 291 275 pin=100m W Meas ured 1g-SAR (W/kg) 29.8 27.2 Normalized to 1W 1g-SAR (W/kg) Deviation (%) 298 2.41 272 -1.09 Limit ± 10% ± 10% Meas urem ent Date Aug.09,2022 Aug.10,2022 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 19 of 91 4 PD SYSTEM VERIFICATION 4.1 System check The system was verified to be within ±0.66 dB of the power density targets on the calibration certificate according to the test system specification in the user's manual and calibration facility recommendation. The 0.66 dB deviation threshold represents the expanded uncertainty for system performance checks using SPEAG's mmWave verification sources. The same spatial resolution and measurement region used in the source calibration was applied during the system check. The measured power density distribution of verification source was also confirmed through visual inspection to have no noticeable differences, both spatially (shape) and numerically (level) from the distribution provided by the manufacturer, per November 2017 TCBC Workshop Notes. System Verification Setup Photo Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 20 of 91 4.2 System check result The system was verified to be within ±0.66 dB of the power density targets on the calibration certificate according to the test system specification in the user's manual and calibration facility recommendation. The 0.66 dB deviation threshold represents the expanded uncertainty for system performance checks using SPEAG's mmWave verification sources. The same spatial resolution and measurement region used in the source calibration was applied during the system check. The measured power density distribution of verification source was also confirmed through visual inspection to have no noticeable differences, both spatially (shape) and numerically (level) from the distribution provided by the manufacturer, per November 2017 TCBC Workshop Notes. Frequency (MHz) PD Verification Source (MHz) Probe S/N DAE S/N Dis tance (m m ) Prad (m W) Meas ured 4cm ^2 (W/m ^2) Target 4cm ^2 (W/m ^2) Deviation (dB) Date 10000 10000 9579 558 10 86.1 48.4 51.7 -0.29 Aug.11,2022 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 21 of 91 5 TEST CONFIGURATIONS 5.1 Test Environment Ambient Temperature: 22±2° C Tissue Simulating Liquid: 22±2° C 5.2 Test Note General: Measurements are performed respectively on the lowest, middle and highest channels of the operating band(s). General: The EUT is set to maximum power level during all tests, and at the beginning of each test the battery is fully charged. General: During the SAR testing, the DASY system checks power drift by comparing the e-field strength of one specific location measured at the beginning with that measured at the end of the SAR testing. General: According to KDB447498D01v06, testing of other required channels is not required when the reported 1-g SAR for the highest output channel is 0.8 W/kg, when the transmission band is 100 MHz. General: According to KDB865664D01v01r04, SAR measurement variability must be assessed for each frequency band. When the original highest measured SAR is 0.8 W/kg, repeated that measurement once. Perform a second repeated measurement only if the ratio of largest to smallest SAR for the original and first repeated measurements is > 1.20 or when the original or repeated measurement is 1.45 W/kg (~ 10% from the 1-g SAR limit). WLAN 2.4GHz: 802.11b DSSS SAR Test Requirements: SAR is measured for 2.4 GHz 802.11b DSSS mode using the highest measured maximum output power channel, when the reported SAR of the highest measured maximum output power channel for the exposure configuration is 0.8 W/kg, no further SAR testing is required for 802.11b DSSS in that exposure configuration. When the reported SAR is > 0.8 W/kg, SAR is required for that exposure configuration using the next highest measured output power channel. When any reported SAR is > 1.2 W/kg, SAR is required for the third channel; i.e., all channels require testing. WLAN 2.4GHz: 802.11g/n OFDM SAR Test Exclusion Requirements: SAR is not required for 802.11g/n since the highest reported SAR for DSSS is adjusted by the ratio of OFDM to DSSS specified maximum output power and the adjusted SAR is 1.2 W/kg. WLAN 5GHz: Initial Test Configuration: An initial test configuration is determined for OFDM transmission modes according to the channel bandwidth, modulation and data rate combination(s) with the highest maximum output power specified for production units in each standalone and aggregated frequency band. SAR is measured using the highest measured maximum output power channel. When the reported SAR of the initial test configuration is > 0.8 W/kg, SAR measurement is required for the subsequent next highest measured output power channel(s) in the initial test configuration until the reported SAR is 1.2 W/kg or all required channels are tested. Since the highest reported SAR for the initial test configuration is adjusted by the ratio of the subsequent test configuration to initial test configuration Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 22 of 91 specified maximum output power and the adjusted SAR is 1.2 W/kg, SAR is not required for subsequent test configuration. WLAN 5GHz: Based on FCC guidance, general principles of KDB248227D01 can be applied to 802.11ax to determine initial test configuration with 802.11ax being considered as the highest 802.11 mode for the appropriate frequency band. WLAN 6GHz: Per October 2020 & April 2021 TCB Workshop Interim procedures and FCC guidance, start instead with a minimum of 5 test channels across the full band, then adapt and apply conducted power and SAR test reduction procedures of KDB Pub. 248227 v02r02. WIFI 6E SAR is measured by using 6-7GHz parameters per IEC/IEEE62209- 1528:2020 and report also estimated absorbed PD (for reference purposes only, not specifically for compliance). For the highest SAR test configurations also measure incident PD (total) using mmW near-field probe and total-field/power-density reconstruction method. WLAN 6GHz: Per equipment manufacturer guidance, power density was measured at d=2mm with the grid step (0.0625) for determining compliance at d=2mm. WLAN 6GHz: According to October 2020 TCB Workshop Interim procedures, power density results were scaled according to IEC 62479:2010 for the portion of the measurement uncertainty > 30%. Total expanded uncertainty of 2.67 dB (85%) was used to determine the psPD measurement scaling factor. WLAN 6GHz: Per FCC guidance, for simultaneous transmission evaluation, using SAR sum and SPLSR for simultaneous transmit exclusion analyses and evaluations. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 23 of 91 5.3 Test position SAR test position (0mm) For laptop PC, according to KDB 616217 D04, SAR evaluation is required for the bottom surface of the keyboard. This EUT was tested in the base of EUT directly against the flat phantom. The required minimum test separation distance for incorporating transmitters and antennas into laptop computer display is determined with the display screen opened at an angle of 90° to the keyboard compartment. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 24 of 91 5.4 Test limit § 2.1093(d)(1) Applications for equipment authorization of portable RF sources subject to routine environmental evaluation must contain a statement confirming compliance with the limits specified in § 1.1310 as part of their application. Technical information showing the basis for this statement must be submitted to the Commission upon request. The SAR limits specified in § 1.1310(a) through (c) of this chapter shall be used for evaluation of portable devices transmitting in the frequency range from 100 kHz to 6 GHz. Portable devices that transmit at frequencies above 6 GHz shall be evaluated in terms of the MPE limits specified in Table 1 to § 1.1310(e)(1). A minimum separation distance applicable to the operating configurations and exposure conditions of the device shall be used for the evaluation. In general, maximum time-averaged power levels must be used for evaluation. All unlicensed personal communications service (PCS) devices and unlicensed NII devices shall be subject to the limits for general population/uncontrolled exposure. Radiofrequency radiation exposure limits. § 1.1310(a) Specific absorption rate (SAR) shall be used to evaluate the environmental impact of human exposure to radiofrequency (RF) radiation as specified in § 1.1307(b) within the frequency range of 100 kHz to 6 GHz (inclusive). § 1.1310(b) The SAR limits for occupational/controlled exposure are 0.4 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 8 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatial-average SAR limit for occupational/controlled exposure is 20 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 6 minutes to determine compliance with occupational/controlled SAR limits. § 1.1310(c) The SAR limits for general population/uncontrolled exposure are 0.08 W/kg, as averaged over the whole body, and a peak spatial-average SAR of 1.6 W/kg, averaged over any 1 gram of tissue (defined as a tissue volume in the shape of a cube). Exceptions are the parts of the human body treated as extremities, such as hands, wrists, feet, ankles, and pinnae, where the peak spatialaverage SAR limit is 4 W/kg, averaged over any 10 grams of tissue (defined as a tissue volume in the shape of a cube). Exposure may be averaged over a time period not to exceed 30 minutes to determine compliance with general population/uncontrolled SAR limits. Note to paragraphs (a) through (c): SAR is a measure of the rate of energy absorption due to exposure to RF electromagnetic energy. These SAR limits to be used for evaluation are based generally on criteria published by the American National Standards Institute (ANSI) for localized SAR in Section 4.2 of "IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz," ANSI/IEEE Std C95.1-1992, copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017. These criteria for SAR evaluation are similar to those recommended by the National Council on Radiation Protection and Measurements (NCRP) in "Biological Effects and Exposure Criteria for Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 25 of 91 Radiofrequency Electromagnetic Fields," NCRP Report No. 86, Section 17.4.5, copyright 1986 by NCRP, Bethesda, Maryland 20814. Limits for whole body SAR and peak spatial-average SAR are based on recommendations made in both of these documents. The MPE limits in Table 1 are based generally on criteria published by the NCRP in "Biological Effects and Exposure Criteria for Radiofrequency Electromagnetic Fields," NCRP Report No. 86, Sections 17.4.1, 17.4.1.1, 17.4.2 and 17.4.3, copyright 1986 by NCRP, Bethesda, Maryland 20814. In the frequency range from 100 MHz to 1500 MHz, these MPE exposure limits for field strength and power density are also generally based on criteria recommended by the ANSI in Section 4.1 of "IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz," ANSI/IEEE Std C95.1-1992, copyright 1992 by the Institute of Electrical and Electronics Engineers, Inc., New York, New York 10017. Portable devices that transmit at frequencies above 6 GHz shall be evaluated in terms of the MPE limits specified in Table 1 to § 1.1310(e)(1). According to ANSI/IEEE C95.1-1992, the criteria listed in the following Table shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. Peak Spatially Averaged Power Density was evaluated over a circular area of 4cm2 per interim FCC Guidance for near-field power density evaluations per October 2018 TCB Workshop notes Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 26 of 91 f = frequency in MHz. * = Plane-wave equivalent power density. Table 1 to § 1.1310(e)(1) - Limits for Maximum Permissible Exposure (MPE) Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 27 of 91 6 MAXIMUM OUTPUT POWER 6.1 WLAN Main Band Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 1 802.11b 6 11 1 802.11g 6 11 1 802.11n20-HT0 6 2.45GHz 11 1 802.11ax20-HE0 6 11 3 802.11n40-HT0 6 9 3 802.11ax40-HE0 6 9 2412 2437 2462 2412 2437 2462 2412 2437 2462 2412 2437 2462 2422 2437 2452 2422 2437 2452 1Mbps 6Mbps MCS0 MCS0 MCS0 MCS0 20.00 20.00 20.00 18.75 20.00 18.75 18.75 20.00 18.75 18.75 20.00 18.75 16.50 17.46 17.00 16.50 16.79 17.00 Average power (dBm) 19.96 19.99 19.94 18.65 19.71 18.29 18.07 19.72 18.12 17.54 19.80 17.49 16.23 17.18 15.92 16.04 16.74 15.76 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 28 of 91 Band 5.15-5.25 GHz Band 5.25-5.35 GHz Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 802.11ac160-VHT0 802.11ax160-HE0 Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 Main Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 36 5180 18.00 40 44 5200 5220 6Mbps 18.00 18.00 48 5240 18.00 36 5180 18.00 40 44 5200 5220 MCS0 18.00 18.00 48 5240 18.00 36 5180 18.00 40 44 5200 5220 MCS0 18.00 18.00 48 5240 18.00 38 46 5190 5230 MCS0 17.75 18.00 38 46 5190 5230 MCS0 17.75 18.00 42 5210 MCS0 18.00 42 5210 MCS0 18.00 50 5250 MCS0 15.25 50 5250 MCS0 15.25 Main Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 52 5260 18.00 56 60 5280 5300 6Mbps 18.00 18.00 64 5320 18.00 52 5260 18.00 56 60 5280 5300 MCS0 18.00 18.00 64 5320 18.00 52 5260 18.00 56 60 5280 5300 MCS0 18.00 18.00 64 5320 18.00 54 62 5270 5310 MCS0 18.00 17.00 54 62 5270 5310 MCS0 18.00 17.00 58 5290 MCS0 17.75 58 5290 MCS0 17.75 Average power (dBm) 17.82 17.71 17.83 17.74 17.62 17.78 17.76 17.83 17.88 17.77 17.87 17.88 17.25 17.85 17.25 17.79 16.87 17.29 14.78 14.66 Average power (dBm) 17.72 17.79 17.70 17.72 17.75 17.86 17.77 17.71 17.82 17.74 17.75 17.75 17.96 16.44 17.88 16.69 17.46 17.63 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 29 of 91 Band 5.6GHz Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 802.11ac160-VHT0 802.11ax160-HE0 Main Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 100 5500 18.00 120 140 5600 5700 6Mbps 18.00 18.00 144 5720 18.00 100 5500 18.00 120 140 5600 5700 MCS0 18.00 18.00 144 5720 18.00 100 5500 18.00 120 140 5600 5700 MCS0 18.00 18.00 144 5720 18.00 102 5510 18.00 118 134 5590 5670 MCS0 18.00 18.00 142 5710 18.00 102 5510 18.00 118 134 5590 5670 MCS0 18.00 18.00 142 5710 18.00 106 5530 18.00 122 5610 MCS0 18.00 138 5690 18.00 106 5530 18.00 122 5610 MCS0 18.00 138 5690 18.00 114 5570 MCS0 15.50 114 5570 MCS0 15.50 Average power (dBm) 17.79 17.85 17.80 17.78 17.71 17.74 17.79 17.69 17.79 17.70 17.75 17.71 17.81 17.81 17.78 17.69 17.81 17.85 17.68 17.74 17.99 17.96 17.98 17.80 17.84 17.78 15.35 15.32 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 30 of 91 Mode 5.8GHz Band 2.45GHz Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 Mode 802.11b 802.11g 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 Main Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 149 5745 18.00 157 5785 6Mbps 18.00 165 5825 18.00 149 5745 18.00 157 5785 MCS0 18.00 165 5825 18.00 149 5745 18.00 157 5785 MCS0 18.00 165 5825 18.00 151 159 5755 5795 MCS0 18.00 18.00 151 159 5755 5795 MCS0 18.00 18.00 155 5775 MCS0 18.00 155 5775 MCS0 18.00 Aux Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 1 2412 20.00 6 2437 1Mbps 20.00 11 2462 20.00 1 2412 19.50 6 2437 6Mbps 20.00 11 2462 18.75 1 2412 19.50 6 2437 MCS0 20.00 11 2462 18.75 1 2412 17.90 6 2437 MCS0 20.00 11 2462 18.75 3 2422 16.25 6 2437 MCS0 17.36 9 2452 16.00 3 2422 16.25 6 2437 MCS0 16.74 9 2452 16.00 Average power (dBm) 17.84 17.82 17.84 17.77 17.72 17.79 17.84 17.68 17.67 17.66 17.72 17.76 17.68 17.98 17.76 Average power (dBm) 19.97 19.98 19.99 19.13 19.84 18.60 18.06 19.89 17.65 17.47 19.77 17.40 16.00 17.07 15.76 15.96 16.66 15.48 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 31 of 91 Band 5.15-5.25 GHz Band 5.25-5.35 GHz Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 802.11ac160-VHT0 802.11ax160-HE0 Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 Aux Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 36 5180 18.00 40 44 5200 5220 6Mbps 18.00 18.00 48 5240 18.00 36 5180 18.00 40 44 5200 5220 MCS0 18.00 18.00 48 5240 18.00 36 5180 18.00 40 44 5200 5220 MCS0 18.00 18.00 48 5240 18.00 38 46 5190 5230 MCS0 18.00 18.00 38 46 5190 5230 MCS0 18.00 18.00 42 5210 MCS0 18.00 42 5210 MCS0 18.00 50 5250 MCS0 16.00 50 5250 MCS0 16.00 Aux Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 52 5260 18.00 56 60 5280 5300 6Mbps 18.00 18.00 64 5320 18.00 52 5260 18.00 56 60 5280 5300 MCS0 18.00 18.00 64 5320 18.00 52 5260 18.00 56 60 5280 5300 MCS0 18.00 18.00 64 5320 18.00 54 62 5270 5310 MCS0 18.00 18.00 54 62 5270 5310 MCS0 18.00 18.00 58 5290 MCS0 18.00 58 5290 MCS0 18.00 Average power (dBm) 17.64 17.75 17.73 17.81 17.65 17.64 17.71 17.75 17.62 17.77 17.70 17.77 17.71 17.77 17.67 17.79 17.97 17.75 15.73 15.67 Average power (dBm) 17.70 17.78 17.82 17.81 17.87 17.81 17.74 17.82 17.82 17.86 17.72 17.71 17.77 17.88 17.73 17.69 17.81 17.71 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 32 of 91 Band 5.6GHz Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 802.11ac160-VHT0 802.11ax160-HE0 Aux Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 100 5500 18.00 120 140 5600 5700 6Mbps 18.00 18.00 144 5720 18.00 100 5500 18.00 120 140 5600 5700 MCS0 18.00 18.00 144 5720 18.00 100 5500 18.00 120 140 5600 5700 MCS0 18.00 18.00 144 5720 18.00 102 5510 18.00 118 134 5590 5670 MCS0 18.00 18.00 142 5710 18.00 102 5510 18.00 118 134 5590 5670 MCS0 18.00 18.00 142 5710 18.00 106 5530 18.00 122 5610 MCS0 18.00 138 5690 18.00 106 5530 18.00 122 5610 MCS0 18.00 138 5690 18.00 114 5570 MCS0 16.25 114 5570 MCS0 16.25 Average power (dBm) 17.83 17.67 17.83 17.66 17.68 17.79 17.67 17.78 17.83 17.65 17.69 17.75 17.77 17.82 17.77 17.72 17.80 17.83 17.76 17.70 17.84 17.91 17.96 17.74 17.80 17.79 15.85 15.48 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Mode 5.8GHz Report No.: TESA2207000203EN Page: 33 of 91 Mode 802.11a 802.11n20-HT0 802.11ax20-HE0 802.11n40-HT0 802.11ax40-HE0 802.11ac80-VHT0 802.11ax80-HE0 Aux Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) 149 5745 18.00 157 5785 6Mbps 18.00 165 5825 18.00 149 5745 18.00 157 5785 MCS0 18.00 165 5825 18.00 149 5745 18.00 157 5785 MCS0 18.00 165 5825 18.00 151 159 5755 5795 MCS0 18.00 18.00 151 159 5755 5795 MCS0 18.00 18.00 155 5775 MCS0 18.00 155 5775 MCS0 18.00 Average power (dBm) 17.80 17.82 17.78 17.65 17.68 17.81 17.69 17.77 17.80 17.70 17.76 17.67 17.76 17.99 17.69 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 34 of 91 6.2 WIFI 6E Main Band Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 1 802.11ax20-HE0 45 93 3 802.11ax40-HE0 43 U-NII-5 91 6.2GHz 7 802.11ax80-HE0 39 87 15 802.11ax160-HE0 47 79 5955 6175 6415 5965 6165 6405 5985 6145 6385 6025 6185 6345 MCS0 MCS0 MCS0 MCS0 Main 4.63 4.57 4.57 8.03 7.71 7.88 10.25 10.33 9.97 13.00 13.00 13.00 4.16 4.12 4.47 7.92 7.62 7.66 10.03 9.90 9.85 12.73 12.99 12.45 Band Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 97 802.11ax20-HE0 105 113 U-NII-6 6.5GHz 802.11ax40-HE0 99 107 802.11ax80-HE0 103 119 802.11ax160-HE0 111 6435 6475 6515 6445 6485 6465 6545 6505 MCS0 MCS0 MCS0 MCS0 4.95 4.70 4.71 8.05 7.96 10.50 10.43 13.00 4.91 4.66 4.67 7.60 7.69 10.26 10.28 12.90 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 35 of 91 Band U-NII-7 6.7GHz Mode U-NII-8 7.0GHz Main Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 117 802.11ax20-HE0 149 181 115 802.11ax40-HE0 147 179 135 802.11ax80-HE0 151 167 802.11ax160-HE0 143 175 6535 6695 6855 6525 6685 6845 6625 6705 6785 6665 6825 Main MCS0 MCS0 MCS0 MCS0 4.64 4.45 5.08 7.92 7.78 7.64 9.86 10.00 10.02 13.00 13.00 4.26 4.03 5.02 7.83 7.74 7.36 9.67 9.87 9.89 12.60 12.98 Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 185 802.11ax20-HE0 209 233 802.11ax40-HE0 187 227 183 802.11ax80-HE0 199 215 802.11ax160-HE0 207 6875 6995 7115 6885 7085 6865 6945 7025 6985 MCS0 MCS0 MCS0 MCS0 5.06 5.08 0.77 7.84 8.16 10.17 10.62 10.39 13.00 4.89 4.96 0.52 7.59 7.74 9.86 10.33 10.02 12.80 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 36 of 91 Band U-NII-5 6.2GHz Band U-NII-6 6.5GHz Aux Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 1 802.11ax20-HE0 45 93 3 802.11ax40-HE0 43 91 7 802.11ax80-HE0 39 87 15 802.11ax160-HE0 47 79 5955 6175 6415 5965 6165 6405 5985 6145 6385 6025 6185 6345 MCS0 MCS0 MCS0 MCS0 Aux 4.61 4.12 4.21 7.32 7.32 7.64 10.20 10.27 10.01 13.00 13.00 13.00 4.13 3.96 4.04 7.26 7.23 7.58 9.99 9.87 9.82 12.68 12.98 12.76 Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 97 802.11ax20-HE0 105 113 802.11ax40-HE0 99 107 802.11ax80-HE0 103 119 802.11ax160-HE0 111 6435 6475 6515 6445 6485 6465 6545 6505 MCS0 MCS0 MCS0 MCS0 4.94 5.01 4.80 8.00 8.06 10.53 10.53 13.00 4.86 4.67 4.48 7.58 7.66 10.30 10.24 12.90 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 37 of 91 Band U-NII-7 6.7GHz Mode U-NII-8 7.0GHz Aux Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 117 802.11ax20-HE0 149 181 115 802.11ax40-HE0 147 179 135 802.11ax80-HE0 151 167 802.11ax160-HE0 143 175 6535 6695 6855 6525 6685 6845 6625 6705 6785 6665 6825 Aux MCS0 MCS0 MCS0 MCS0 4.30 4.83 4.13 8.02 7.71 7.39 10.23 10.00 9.87 13.00 13.00 4.17 4.57 4.08 7.98 7.66 7.34 9.86 9.88 9.67 12.37 12.93 Mode Channel Frequency (MHz) Data Rate Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) 185 802.11ax20-HE0 209 233 802.11ax40-HE0 187 227 183 802.11ax80-HE0 199 215 802.11ax160-HE0 207 6875 6995 7115 6885 7085 6865 6945 7025 6985 MCS0 MCS0 MCS0 MCS0 4.58 4.54 0.46 7.56 7.71 10.06 10.52 10.08 13.00 4.48 4.41 0.40 7.40 7.67 9.77 10.40 10.06 12.81 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 38 of 91 6.3 Bluetooth 1Mbps 2Mbps 3Mbps Mode Channel Frequency (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) Max. Rated Avg. Power + Max. Tolerance (dBm) Average power (dBm) CH 00 2402 8.51 7.17 7.08 BR/EDR CH 39 2441 10.50 8.60 9.50 7.40 9.50 7.36 CH 78 2480 8.96 7.61 7.52 6.4 BLE Mode BLE_1M Channel Frequency (MHz) CH 00 CH 19 CH 39 2402 2440 2480 Max. Rated Avg.Power + Max. Tolerance (dBm) 9 GFSK Average Output Power (dBm) 7.39 7.78 7.87 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group 2.4G b duty (8.34/8.38=0.995) Scaling Factor=1.005 Report No.: TESA2207000203EN Page: 39 of 91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group BT duty (2.89/3.75=0.77) Scaling Factor=1.299 Report No.: TESA2207000203EN Page: 40 of 91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group 5G n40 duty (4.02/4.1=0.98) Scaling Factor=1.02 Report No.: TESA2207000203EN Page: 41 of 91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group 5G ac80 duty (4.01/4.1=0.98) Scaling Factor=1.02 Report No.: TESA2207000203EN Page: 42 of 91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group 6G ax160 duty (2.58/2.65=0.934) Scaling Factor=1.07 Report No.: TESA2207000203EN Page: 43 of 91 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 44 of 91 7 SUMMARY OF RESULTS 7.1 Decision rules Reported measurement data comply with Test Methodology in section 1.1. Determining compliance shall be based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. 7.2 Summary of SAR Results WLAN Mode Antenna Position Distance (mm) CH WLAN 802.11b Main Bottom Surface 0 6 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.2G Main Bottom Surface 0 42 WLAN 802.11ac(80M) 5.2G Main Bottom Surface 0 42 Mode Antenna Position Distance (mm) CH WLAN 802.11n(40M) 5.3G Main Bottom Surface 0 54 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.6G Main Bottom Surface 0 106 WLAN 802.11ac(80M) 5.6G Main Bottom Surface 0 138 WLAN 802.11ac(80M) 5.6G Main Bottom Surface 0 138 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.8G Main Bottom Surface 0 155 Mode Antenna Position Distance (mm) CH WLAN 802.11b WLAN 802.11b WLAN 802.11b Aux Bottom Surface 0 1 Aux Bottom Surface 0 6 Aux Bottom Surface 0 11 Mode Antenna Position Distance (mm) CH Bluetooth(GFSK) Aux Bottom Surface 0 78 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.2G Aux Bottom Surface 0 42 WLAN 802.11ac(80M) 5.2G Aux Bottom Surface 0 42 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.3G Aux Bottom Surface 0 58 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.6G Aux Bottom Surface 0 106 Mode Antenna Position Distance (mm) CH WLAN 802.11ac(80M) 5.8G Aux Bottom Surface 0 155 WLAN 802.11ac(80M) 5.8G Aux Bottom Surface 0 155 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 2437 20.00 19.99 1.005 100.23% 0.157 0.158 001 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5210 18.00 16.87 1.020 129.72% 0.474 0.627 002 5210 17.00 16.98 1.020 100.46% 0.385 0.395 003 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5270 18.00 17.96 1.020 100.93% 0.557 0.573 004 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5530 18.00 17.99 1.020 100.23% 0.853 0.872 - 5690 18.00 17.98 1.020 100.46% 0.948 0.971 005 5690 18.00 17.98 1.020 100.46% 0.913 0.936 - Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5775 18.00 17.98 1.020 100.46% 0.783 0.802 006 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 2412 20.00 19.97 1.005 100.69% 0.441 0.446 - 2437 20.00 19.98 1.005 100.46% 0.489 0.494 007 2462 20.00 19.99 1.005 100.23% 0.435 0.438 - Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 2480 10.50 8.96 1.299 142.56% 0.024 0.044 008 Averaged SAR over 1g Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling (W/kg) Measured Reported ID 5210 18.00 17.97 1.020 100.69% 0.515 0.529 009 5210 17.00 16.98 1.020 100.46% 0.415 0.425 010 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5290 18.00 17.81 1.020 104.47% 0.513 0.547 011 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5530 18.00 17.84 1.020 103.75% 0.752 0.796 012 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported ID 5775 18.00 17.99 1.020 100.23% 0.908 0.928 013 5775 18.00 17.99 1.020 100.23% 0.891 0.911 - Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 45 of 91 WIFI 6E Mode Antenna Position Distance (mm) CH U-NII-5 6.2GHz802.11ax(160M) Main Bottom Surface 0 15 U-NII-5 6.2GHz802.11ax(160M) Main Bottom Surface 0 47 Mode Antenna Position Distance (mm) CH U-NII-6 6.5GHz802.11ax(160M) Main Bottom Surface 0 111 Mode Antenna Position Distance (mm) CH U-NII-7 6.7GHz802.11ax(160M) Main Bottom Surface 0 143 U-NII-7 6.7GHz802.11ax(160M) Main Bottom Surface 0 175 Mode Antenna Position Distance (mm) CH U-NII-8 7.0GHz 802.11ax (160M) Main Bottom Surface 0 207 Mode Antenna Position Distance (mm) CH U-NII-5 6.2GHz802.11ax(160M) Aux Bottom Surface 0 15 U-NII-5 6.2GHz802.11ax(160M) Aux Bottom Surface 0 47 U-NII-5 6.2GHz802.11ax(160M) Aux Bottom Surface 0 79 Mode Antenna Position Distance (mm) CH U-NII-6 6.5GHz802.11ax(160M) Aux Bottom Surface 0 111 Mode Antenna Position Distance (mm) CH U-NII-7 6.7GHz802.11ax(160M) Aux Bottom Surface 0 175 Mode Antenna Position Distance (mm) CH U-NII-8 7.0GHz 802.11ax (160M) Aux Bottom Surface 0 207 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6025 13.00 12.73 1.070 106.41% 0.245 0.279 1.810 2.061 014 6185 13.00 12.99 1.070 100.23% 0.233 0.250 1.710 1.834 - Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6505 13.00 12.90 1.070 102.33% 0.285 0.312 2.010 2.201 015 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6665 13.00 12.60 1.07 109.65% 0.311 0.365 2.180 2.558 - 6825 13.00 12.98 1.070 100.46% 0.346 0.372 2.400 2.580 016 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6985 13.00 12.80 1.070 104.71% 0.259 0.290 1.750 1.961 017 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6025 13.00 12.68 1.070 107.65% 0.274 0.316 1.920 2.211 - 6185 13.00 12.98 1.070 100.46% 0.300 0.322 2.130 2.290 018 6345 13.00 12.76 1.070 105.68% 0.272 0.308 1.830 2.069 - Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6505 13.00 12.90 1.070 102.33% 0.270 0.296 1.840 2.015 019 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6825 13.00 12.93 1.070 101.62% 0.270 0.294 1.820 1.979 020 Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Duty cycle scaling Power scaling Averaged SAR over 1g (W/kg) Measured Reported Estimated APD W/m^2(4cm^2) Measured Reported ID 6985 13.00 12.81 1.070 104.47% 0.274 0.306 1.860 2.079 021 Note: Reported SAR = measured SAR * Power scaling * Duty cycle scaling Reported APD = measured APD * Power scaling * Duty cycle scaling Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 46 of 91 7.3 Mode WLAN 6E 802.11ax(160M) U-NII-5 WLAN 6E 802.11ax(160M) U-NII-6 WLAN 6E 802.11ax(160M) U-NII-7 WLAN 6E 802.11ax(160M) U-NII-8 Mode WLAN 6E 802.11ax(160M) U-NII-5 WLAN 6E 802.11ax(160M) U-NII-6 WLAN 6E 802.11ax(160M) U-NII-7 WLAN 6E 802.11ax(160M) U-NII-8 Summary of PD Results Position Distance (mm) CH Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Tune-up Scaling Duty cycle scaling Measurement uncertainty Bottom Surface 2 15 6025 13.00 12.73 106.41% 1.07 1.55 Measured Total psPD (W/m^2) 3.680 Bottom Surface 2 47 6185 13.00 12.99 100.23% 1.07 1.55 2.740 Bottom Surface 2 111 6505 13.00 12.90 102.33% 1.07 1.55 2.760 Bottom Surface 2 175 6825 13.00 12.98 100.46% 1.07 1.55 3.360 Bottom Surface 2 207 6985 13.00 12.80 104.71% 1.07 1.55 2.910 Position Distance (mm) CH Freq. (MHz) Max. Rated Avg. Power + Max. Tolerance (dBm) Measured Avg. Power (dBm) Tune-up Scaling Duty cycle scaling Measurement uncertainty Bottom Surface 2 15 6025 13.00 12.68 107.65% 1.07 1.55 Measured Total psPD (W/m^2) 2.620 Bottom Surface 2 47 6185 13.00 12.98 100.46% 1.07 1.55 2.000 Bottom Surface 2 111 6505 13.00 12.90 102.33% 1.07 1.55 1.830 Bottom Surface 2 143 6665 13.00 12.37 115.61% 1.07 1.55 1.120 Bottom Surface 2 207 6985 13.00 12.81 104.47% 1.07 1.55 1.980 PD result(4cm) Reported Measured Reported ID Total psPD Normal psPD Normal psPD (W/m^2) (W/m^2) (W/m^2) 6.495 2.460 4.342 022 4.555 1.410 2.344 023 4.684 1.690 2.868 024 5.598 1.600 2.666 025 5.054 1.180 2.049 026 PD result(4cm) Reported Measured Reported ID Total psPD Normal psPD Normal psPD (W/m^2) (W/m^2) (W/m^2) 4.678 1.760 3.142 027 3.332 1.060 1.766 028 3.106 0.918 1.558 029 2.148 0.756 1.450 030 3.431 1.140 1.975 031 Note: Reported PD = measured PD * Power scaling * Duty cycle scaling * Uncertainty scaling 7.4 Reporting statements of conformity The conformity statement in this report is based solely on the test results, measurement uncertainty is excluded. 7.5 Conclusion The device is compliant because all the standalone results are less than their corresponding criteria. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 47 of 91 8 SIMULTANEOUS TRANSMISSION ANALYSIS 8.1 Simultaneous Transmission Scenarios: Simultaneous Transmit Configurations WLAN 2.4GHz Main + BT Aux WLAN 2.4GHz Main + WLAN 2.4GHz Aux WLAN 5GHz Main + BT Aux WLAN 5GHz Main + WLAN 5GHz Aux WLAN 5GHz Main + WLAN 5GHz Aux + BT Aux WLAN 6GHz Main + BT Aux WLAN 6GHz Main + WLAN 6GHz Aux WLAN 6GHz Main + WLAN 6GHz Aux + BT Aux Body Yes Yes Yes Yes Yes Yes Yes Yes Note: 1. Bluetooth and WLAN Aux share the same antenna path, and BT can transmit with WLAN Main simultaneously. 2. For 2.4/5GHz WLAN Main and Aux antennas, the maximum output power of each antenna during simultaneous transmission is the same with or less than that used in standalone transmission, and we used the sum of 1-g SAR provision in KDB447498D01 to exclude the simultaneous transmitted SAR measurement. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 48 of 91 8.2 Estimated SAR calculation According to KDB447498 D01v06 When standalone SAR test exclusion applies to an antenna that transmits simultaneously with other antennas, the standalone SAR must be estimated according to following to determine simultaneous transmission SAR test exclusion: Estimated SAR = Max. Min. test tune up power (mW) separation distance(mm) × f(GHz) 7.5 If the minimum test separation distance is < 5mm, a distance of 5mm is used for estimated SAR calculation. When the test separation distance is >50mm, the 0.4W/kg is used for SAR-1g. 8.3 SPLSR evaluation and analysis Per KDB447498D01, when the sum of SAR is larger than the limit, SAR test exclusion is determined by the SAR sum to peak location separation ratio(SPLSR). The simultaneous transmitting antennas in each operating mode and exposure condition combination must be considered one pair at a time to determine the SAR to peak location separation ratio to qualify for test exclusion. The ratio is determined by (SAR1 + SAR2)^1.5/Ri, rounded to two decimal digits, and must be 0.04 for all antenna pairs in the configuration to qualify for 1-g SAR test exclusion. SAR1 and SAR2 are the highest reported or estimated SAR for each antenna in the pair, and Ri is the separation distance between the peak SAR locations for the antenna pair in mm. When standalone test exclusion applies, SAR is estimated; the peak location is assumed to be at the feed-point or geometric center of the antenna. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 49 of 91 Simultaneous Transmission Combination FCC Reported SAR Exposure Position Bottom Surf ace 0 2 2.4GHz WLAN Main 1g SAR (W/kg) 0.158 3 2.4GHz WLAN Aux 1g SAR (W/kg) 0.494 4 5GHz WLAN Main 1g SAR (W/kg) 0.971 5 5GHz WLAN Aux 1g SAR (W/kg) 0.928 7 Bluetooth Aux 1g SAR (W/kg) 0.044 8 6GHz WLAN Main 1g SAR (W/kg) 0.372 9 6GHz WLAN Aux 1g SAR (W/kg) 0.322 Scenario 1 Scenario 2 Scenario 3 Scenario 4 Scenario 5 Scenario 6 Scenario 7 Scenario 8 2+3 Summed 1g SAR (W/kg) 4+5 Summed 1g SAR (W/kg) 2+7 Summed 1g SAR (W/kg) 4+7 Summed 1g SAR (W/kg) 4+5+7 Summed 1g SAR (W/kg) 7+8 Summed 1g SAR (W/kg) 8+9 Summed 1g SAR (W/kg) 7+8+9 Summed 1g SAR (W/kg) 0.652 1.899 0.202 1.015 1.943 0.416 0.694 0.738 Position Bottom Surface Conditions WLAN 5G Main WLAN 5G Aux SAR Value (W/kg) 0.971 0.928 Scenario 4+5: Coordinates (mm) x y z 108.40 75.00 -177.00 108.20 -2.40 -177.00 SAR (W/kg) 1.899 Peak Location Separation Distance (mm) - 77.40 SPLSR 0.034 Simultaneous Transmission SAR Test - SPLSR 0.04, Not required Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 50 of 91 Scenario 5: Position Conditions SAR Value (W/kg) Coordinates (mm) x y z SAR (W/kg) Peak Location Separation Distance (mm) SPLSR Simultaneous Transmission SAR Test Bottom WLAN 5G Main 0.971 108.40 75.00 -177.00 - - - - Surface WLAN5G Aux + BT Aux 0.972 108.20 -2.40 -177.00 1.943 77.40 0.035 SPLSR 0.04, Not required *For peak SAR location of WLAN Aux + BT, using the peak SAR location with smallest separation distance between WLAN Main - WLAN Aux pair and WLAN Main - BT pair to be the worst case condition. 8.4 Conclusion The simultaneous transmission is compliant because both SAR sum and/or SPLSR are less than their corresponding criteria. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 51 of 91 9 INSTRUMENTS LIST SAR Test Site: SAR 4 Manufacturer Device Type Serial number SPEAG Dosimetric E-Field Probe EX3DV4 7712 SPEAG Data acquisition Electronics DAE4 1719 SPEAG System Validation Dipole D2450V2 727 SPEAG System Validation Dipole D5GHzV2 1023 SPEAG Software DASY 8 V16.0.2.83 N/A SPEAG Phantom ELI N/A SPEAG Agilent Agilent Agilent R&S Dielectric Assessment Kit Dual-directional coupler Dual-directional coupler MXG Analog Signal Generator MXG Analog Signal Generator DAKS-3.5 772D 778D N5181A SMB100A03 1053 MY52180142 MY52180302 MY50145142 182996 EMCI Amplifier ZHL-42 980189 EMCI R&S R&S R&S LKM TECPEL Amplifier Power Meter Power Sensor Power Sensor Digital thermometer Digital thermometer ZVE-8G NRX NRP18S NRP18S DTM3000 DTM-303A 980190 102191 101358 109065 EC14010603 TP190085 Date of last calibration Mar/21/2022 Mar/25/2022 Apr/25/2022 Jan/27/2022 Calibration not required Calibration not required Feb/28/2022 Nov/02/2021 Oct/29/2021 Dec/23/2021 Dec/08/2021 Calibration not required Calibration not required Jan/22/2022 Jan/22/2022 Oct/12/2021 Nov/09/2021 Jan/14/2022 Date of next calibration Mar/20/2023 Mar/24/2023 Apr/24/2023 Jan/26/2023 Calibration not required Calibration not required Feb/27/2023 Nov/01/2022 Oct/28/2022 Dec/22/2022 Dec/07/2022 Calibration not required Calibration not required Jan/21/2023 Jan/21/2023 Oct/11/2022 Nov/08/2022 Jan/13/2023 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 52 of 91 Manufacturer SPEAG SPEAG SPEAG SPEAG SPEAG SPEAG SPEAG SPEAG SPEAG SPEAG Agilent Agilent Agilent R&S EMCI SAR Test Site: SAR 6 Device Type Serial number Dosimetric E-Field Probe EX3DV4 7466 Data acquisition Electronics DAE4 558 E-field Probe for Near Field EUmmWV4 9579 Application System Validation Dipole D6.5GHzV2 1006 System Validation Dipole D7GHzV2 1007 5G Verification Source 10GHz 5G-Veri10 1021 Software DASY 6 V16.0.0.116 N/A Phantom ELI N/A Phantom mmWave Phantom Dielectric Assessment Kit DAKS-3.5 Dual-directional coupler 772D Dual-directional coupler 778D MXG Analog Signal Generator N5181A MXG Analog Signal Generator SMB100A03 N/A 1053 MY52180142 MY52180302 MY50145142 182996 Amplifier ZHL-42 980189 EMCI R&S R&S R&S LKM TECPEL Amplifier Power Meter Power Sensor Power Sensor Digital thermometer Digital thermometer ZVE-8G NRX NRP18S NRP18S DTM3000 DTM-303A 980190 102191 101358 109065 EC14010603 TP190085 Date of last calibration Jan/26/2022 Nov/23/2021 Date of next calibration Jan/25/2023 Nov/22/2022 Oct/06/2021 Oct/05/2022 Aug/26/2021 Aug/26/2021 Jan/24/2022 Calibration not required Calibration not required Calibration not required Feb/28/2022 Nov/02/2021 Oct/29/2021 Dec/23/2021 Dec/08/2021 Calibration not required Calibration not required Jan/22/2022 Jan/22/2022 Oct/12/2021 Nov/09/2021 Jan/14/2022 Aug/25/2022 Aug/25/2022 Jan/23/2023 Calibration not required Calibration not required Calibration not required Feb/27/2023 Nov/01/2022 Oct/28/2022 Dec/22/2022 Dec/07/2022 Calibration not required Calibration not required Jan/21/2023 Jan/21/2023 Oct/11/2022 Nov/08/2022 Jan/13/2023 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 53 of 91 10 UNCERTAINTY BUDGET A Source of Uncertainty Measurement Uncertainty evaluation template for DUT SAR test (3-6G) c D e f Tolerance/ Probability Uncertainty Distributio Div Div Value ci (1g) g ci (10g) h=c * f / e Standard uncertainty i=c * g / e Standard uncertainty k vi, or Veff Measurement system Probe calibration 6.55% N 1 1 1 1 6.55% 6.55% Isotropy , Axial 3.50% R 3 1.732 1 1 2.02% 2.02% Isotropy, Hemispherical 9.60% R 3 1.732 1 1 5.54% 5.54% Modulation Response 2.40% R 3 1.732 1 1 1.40% 1.40% Boundary Effect 1.00% R 3 1.732 1 1 0.58% 0.58% Linearity 4.70% R 3 1.732 1 1 2.71% 2.71% Detection Limits 1.00% R 3 1.732 1 1 0.58% 0.58% Readout Electronics 0.30% N 1 1 1 1 0.30% 0.30% Response time 0.80% R 3 1.732 1 1 0.46% 0.46% Integration Time 2.60% R 3 1.732 1 1 1.50% 1.50% Measurement drift (class A evaluation) 1.75% R 3 1.732 1 1 1.01% 1.01% RF ambient condition noise 3.00% R 3 1.732 1 1 1.73% 1.73% RF ambient conditions reflections 3.00% R 3 1.732 1 1 1.73% 1.73% Probe positioner Mechanical restrictions 0.40% R 3 1.732 1 1 0.23% 0.23% Probe Positioning with respect to phantom shell 2.90% R 3 1.732 1 1 1.67% 1.67% Post-processing 1.00% R 3 1.732 1 1 0.58% 0.58% Max SAR Eval 1.00% R 3 1.732 1 1 0.58% 0.58% Test Sample related Test sample positioning 2.90% N 1 1 1 1 2.90% 2.90% M-1 Device Holder Uncertainty 3.60% N 1 1 1 1 3.60% 3.60% M-1 Drift of output power 5.00% R 3 1.732 1 1 2.89% 2.89% Phantom and Setup Phantom Uncertainty 4.00% R 3 Liquid permittivity (mea.) 0.47% N 1 1.732 1 1 1 0.64 0.43 2.31% 0.30% 2.31% 0.20% M Liquid Conductivity (mea.) 0.31% N 1 Combined standard uncertainty Expant uncertainty (95% confidence interval), K=2 RSS 1 0.6 0.49 0.19% 0.15% M 11.72% 23.44% 11.71% 23.42% Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 54 of 91 Measurement Uncertainty evaluation template for DUT SAR test (0.3-3G) A Source of Uncertainty c D e f Tolerance/ Probability Uncertainty Distributio Div Div Value ci (1g) g ci (10g) h=c * f / e Standard uncertainty i=c * g / e Standard uncertainty k vi, or Veff Measurement system Probe calibration 6.00% N 1 1 1 1 6.00% 6.00% Isotropy , Axial 3.50% R 3 1.732 1 1 2.02% 2.02% Isotropy, Hemispherical 9.60% R 3 1.732 1 1 5.54% 5.54% Modulation Response 2.40% R 3 1.732 1 1 1.40% 1.40% Boundary Effect 1.00% R 3 1.732 1 1 0.58% 0.58% Linearity 4.70% R 3 1.732 1 1 2.71% 2.71% Detection Limits 1.00% R 3 1.732 1 1 0.58% 0.58% Readout Electronics 0.30% N 1 1 1 1 0.30% 0.30% Response time 0.80% R 3 1.732 1 1 0.46% 0.46% Integration Time 2.60% R 3 1.732 1 1 1.50% 1.50% Measurement drift (class A evaluation) 1.75% R 3 1.732 1 1 1.01% 1.01% RF ambient condition noise 3.00% R 3 1.732 1 1 1.73% 1.73% RF ambient conditions reflections 3.00% R 3 1.732 1 1 1.73% 1.73% Probe positioner Mechanical restrictions 0.40% R 3 1.732 1 1 0.23% 0.23% Probe Positioning with respect to phantom shell 2.90% R 3 1.732 1 1 1.67% 1.67% Post-processing 1.00% R 3 1.732 1 1 0.58% 0.58% Max SAR Eval 1.00% R 3 1.732 1 1 0.58% 0.58% Test Sample related Test sample positioning 2.90% N 1 1 1 1 2.90% 2.90% M-1 Device Holder Uncertainty 3.60% N 1 1 1 1 3.60% 3.60% M-1 Drift of output power 5.00% R 3 1.732 1 1 2.89% 2.89% Phantom and Setup Phantom Uncertainty 4.00% R 3 Liquid permittivity (mea.) 0.28% N 1 1.732 1 1 1 0.64 0.43 2.31% 0.18% 2.31% 0.12% M Liquid Conductivity (mea.) 1.91% N 1 Combined standard uncertainty Expant uncertainty (95% confidence interval), K=2 RSS 1 0.6 0.49 1.15% 0.94% M 11.48% 22.95% 11.45% 22.89% Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 55 of 91 a Source of Uncertainty Measurement system errors Probe calibration Probe Calibration Drift Probe Linearity Broadband Signal Probe Isotropy Data Acquisition RF Ambient Probe positioning Data Processing Phantom and device errors Conductivity (meas.)DAK Conductivity (temp.)BB Phantom Permittivity Distance DUT - TSL Device Positioning (±0.5mm) Device Holder DUT Modulationm Time-average SAR DUT drift Val Antenna Unc. Unc. Input Power Correction to the SAR results Deviation to Target SAR scaling Combined Std. uncertainty Expanded Std. uncertainty (95% confidence interval), K=2 DASY6 Uncertainty Budget According to IEC/IEEE 62209-1528 (Frequency band: 6GHz - 10GHz range) b c d e e f=b * e / d Uncertainty Probability Value (±%) Distributioin Div. Div. Value (ci) 1g (ci) Std. uncertainty 10g (1g) (±%) 18.6 N 2 2 1 1 9.3 1.7 R 3 1.732 1 1 1.0 4.7 R 3 1.732 1 1 2.7 2.8 R 3 1.732 1 1 1.6 7.6 R 3 1.732 1 1 4.4 0.3 N 1 1 1 1 0.3 1.8 N 1 1 1 1 1.8 0.2 N 1 1 0.67 0.67 0.1 3.5 N 1 1 1 1 3.5 2.5 N 1 1 0.78 0.71 2.0 2.4 R 3 1.732 0.78 0.71 1.1 14.0 R 3 1.732 0.5 0.5 4.0 2.0 N 1 1 2 2 4.0 1.0 N 1 1 1 1 1.0 3.6 N 1 1 1 1 3.6 2.4 R 3 1.732 1 1 1.4 0.0 R 3 1.732 1 1 0.0 2.5 N 1 1 1 1 2.5 0.0 N 1 1 1 1 0.0 0.0 N 1 1 1 1 0.0 1.90 N 1 1 1 0.84 R 3 1.732 1 1 1.9 0.0 14.0 28.0 f=b * e / d Std. uncertainty (10g) (±%) 9.3 1.0 2.7 1.6 4.4 0.3 1.8 0.1 3.5 1.8 1.0 4.0 4.0 1.0 3.6 1.4 0.0 2.5 0.0 0.0 1.6 0.0 13.9 27.8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 56 of 91 cDASY6 Module mmWave Uncertainty Budget for PD Evaluation Distances to the Antennas / 5 In Compliance with IEC/IEEE 63195 a b c d e Source of Uncertainty Uncertainty Probability Value (+-dB) Distributioin Div. Div. Value ci Uncertainty terms dependent on the measurement system Probe calibration 0.49 N 1 1 1 Probe correction 0.00 R 3 1.732 1 Frequency response (BW1GHz) 0.20 R 3 1.732 1 Sensor cross coupling 0.00 R 3 1.732 1 Isotropy 0.50 R 3 1.732 1 Linearity 0.20 R 3 1.732 1 Probe scattering 0.00 R 3 1.732 1 Probe positioning offset 0.30 R 3 1.732 1 Probe positioning repeatability 0.04 R 3 1.732 1 Sensor mechanical offset 0.00 R 3 1.732 1 Probe spatial resolution 0.00 R 3 1.732 1 Field impedance dependance 0.00 R 3 1.732 1 Amplitude and phase drift 0.00 R 3 1.732 1 Amplitude and phase noise 0.04 R 3 1.732 1 Measurement area truncation 0.00 R 3 1.732 1 Data acquisition 0.03 N 1 1 1 Sampling 0.00 R 3 1 1 Field reconstruction 2.00 R 3 1.732 1 Forward transformation 0.00 R 3 1.732 1 Power density scaling - R 3 1.732 1 Spatial averaging 0.10 R 3 1.732 1 System detection limit 0.04 R 3 1.732 1 Uncertainty terms dependent on the DUT and environmental factors Probe coupling with DUT 0.00 R 3 1.732 1 Modulation response 0.40 R 3 1.732 1 Integration time 0.00 R 3 1.732 1 Response time 0.00 R 3 1.732 1 Device holder influence 0.10 R 3 1.732 1 DUT alignment 0.00 R 3 1.732 1 RF ambient conditions 0.04 R 3 1.732 1 Ambient reflections 0.04 R 3 1.732 1 Immunity / secondary reception 0.00 R 3 1.732 1 Drift of the DUT - R 3 1.732 1 Combined Std. uncertainty Expanded Std. uncertainty (95% confidence interval), K=2 f=b * e / d g Std. uncertainty (vi) (+-dB) Veff 0.49 0.00 0.12 0.00 0.29 0.12 0.00 0.17 0.02 0.00 0.00 0.00 0.00 0.02 0.00 0.03 0.00 1.15 0.00 - 0.06 0.02 0.00 0.23 0.00 0.00 0.06 0.00 0.02 0.02 0.00 - 1.33 2.67 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 57 of 91 11 SAR MEASUREMENT RESULTS ID: 001 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11b_Body_Bottom Surface_CH 6_0mm_Main Ambient temperature: 22.1°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 2437.0, 6 8.16 1.821 39.112 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 96.0 x 144.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-07 2022-08-07 psSAR1g [W/kg] 0.142 0.157 psSAR10g [W/kg] 0.065 0.067 Power Drift [dB] -0.05 0.05 M2/M1 [%] 51.1 Dist 3dB Peak [mm] 6.0 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 58 of 91 ID: 002 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.2G_Body_Bottom Surface_CH 42_0mm_Main Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5210.0, 42 5.94 4.679 35.863 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.450 0.474 psSAR10g [W/kg] 0.151 0.152 Power Drift [dB] 0.04 0.04 M2/M1 [%] 55.7 Dist 3dB Peak [mm] 7.9 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 59 of 91 ID: 003 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.2G_Body_Bottom Surface_CH 42_0mm_Main_IC Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5210.0, 42 5.94 4.679 35.863 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.352 0.385 psSAR10g [W/kg] 0.119 0.123 Power Drift [dB] 0.05 0.04 M2/M1 [%] 55.8 Dist 3dB Peak [mm] 7.9 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 60 of 91 ID: 004 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11n(40M) 5.3G_Body_Bottom Surface_CH 54_0mm_Main Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5270.0, 54 5.94 4.741 35.795 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.523 0.557 psSAR10g [W/kg] 0.180 0.191 Power Drift [dB] 0.03 0.03 M2/M1 [%] 56.1 Dist 3dB Peak [mm] 8.6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 61 of 91 ID: 005 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.6G_Body_Bottom Surface_CH 138_0mm_Main Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5690.0, 138 5.45 5.173 35.315 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.897 0.948 psSAR10g [W/kg] 0.308 0.320 Power Drift [dB] -0.02 -0.02 M2/M1 [%] 52.0 Dist 3dB Peak [mm] 7.4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 62 of 91 ID: 006 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.8G_Body_Bottom Surface_CH 155_0mm_Main Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5775.0, 155 5.45 5.261 35.218 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.743 0.783 psSAR10g [W/kg] 0.255 0.259 Power Drift [dB] 0.04 0.03 M2/M1 [%] 52.0 Dist 3dB Peak [mm] 7.9 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 63 of 91 ID: 007 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11b_Body_Bottom Surface_CH 6_0mm_Aux Ambient temperature: 22.1°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 2437.0, 6 8.16 1.821 39.112 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 96.0 x 144.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-07 2022-08-07 psSAR1g [W/kg] 0.447 0.489 psSAR10g [W/kg] 0.236 0.235 Power Drift [dB] 0.02 0.01 M2/M1 [%] 55.9 Dist 3dB Peak [mm] 10.0 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 64 of 91 ID: 008 Report No. : TESA2207000203EN Measurement Report for Framework(NB), Bluetooth(GFSK)_Body_Bottom Surface_CH 78_0mm_Aux Ambient temperature: 22.1°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 2480.0, 78 8.16 1.860 39.051 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 96.0 x 144.0 30.0 x 30.0 x 30.0 Grid Steps [mm] 12.0 x 12.0 5.0 x 5.0 x 5.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-07 2022-08-07 psSAR1g [W/kg] 0.030 0.024 psSAR10g [W/kg] 0.014 0.009 Power Drift [dB] 0.01 0.02 M2/M1 [%] 58.4 Dist 3dB Peak [mm] 15.0 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 65 of 91 ID: 009 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.2G_Body_Bottom Surface_CH 42_0mm_Aux Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5210.0, 42 5.94 4.679 35.863 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.473 0.515 psSAR10g [W/kg] 0.158 0.165 Power Drift [dB] 0.02 0.04 M2/M1 [%] 56.6 Dist 3dB Peak [mm] 7.2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 66 of 91 ID: 010 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.2G_Body_Bottom Surface_CH 42_0mm_Aux_IC Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5210.0, 42 5.94 4.679 35.863 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.372 0.415 psSAR10g [W/kg] 0.125 0.132 Power Drift [dB] -0.02 -0.03 M2/M1 [%] 56.5 Dist 3dB Peak [mm] 7.2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 67 of 91 ID: 011 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.3G_Body_Bottom Surface_CH 58_0mm_Aux Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5290.0, 58 5.94 4.762 35.772 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.461 0.513 psSAR10g [W/kg] 0.154 0.162 Power Drift [dB] 0.02 -0.01 M2/M1 [%] 56.2 Dist 3dB Peak [mm] 7.4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 68 of 91 ID: 012 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.6G_Body_Bottom Surface_CH 106_0mm_Aux Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5530.0, 106 5.29 5.01 35.772 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.693 0.752 psSAR10g [W/kg] 0.233 0.244 Power Drift [dB] 0.02 0.03 M2/M1 [%] 54.2 Dist 3dB Peak [mm] 8.2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 69 of 91 ID: 013 Report No. : TESA2207000203EN Measurement Report for Framework(NB), WLAN 802.11ac(80M) 5.8G_Body_Bottom Surface_CH 155_0mm_Aux Ambient temperature: 22.2°C; Liquid temperature: 21.4°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 5775.0, 155 5.45 5.261 35.218 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7712, 2022-03-21 DAE4 Sn1719, 2022-03-25 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 80.0 x 140.0 24.0 x 24.0 x 22.0 Grid Steps [mm] 10.0 x 10.0 4.0 x 4.0 x 2.0 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-08 2022-08-08 psSAR1g [W/kg] 0.828 0.908 psSAR10g [W/kg] 0.283 0.297 Power Drift [dB] 0.03 0.02 M2/M1 [%] 51.3 Dist 3dB Peak [mm] 8.2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 70 of 91 ID: 014 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-5 6.2GHz 802.11ax(160M)_Body_Bottom Surface_CH 15_0mm_Main Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6025.0, 15 5.65 5.519 34.93 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.218 0.245 psSAR8g [W/kg] 0.083 0.091 psSAR10g [W/kg] 0.074 0.079 psPDab (4.0cm2, sq) [W/m2] 1.810 Power Drift [dB] 0.02 -0.01 M2/M1 [%] 56.6 Dist 3dB Peak [mm] 7.5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 71 of 91 ID: 015 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-6 6.5GHz 802.11ax(160M)_Body_Bottom Surface_CH 111_0mm_Main Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6505.0, 111 5.65 6.023 34.354 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.256 0.285 psSAR8g [W/kg] 0.095 0.100 psSAR10g [W/kg] 0.084 0.087 psPDab (4.0cm2, sq) [W/m2] 2.010 Power Drift [dB] 0.01 -0.03 M2/M1 [%] 51.3 Dist 3dB Peak [mm] 7.5 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 72 of 91 ID: 016 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-7 6.7GHz 802.11ax(160M)_Body_Bottom Surface_CH 175_0mm_Main Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6825.0, 175 5.65 6.364 33.97 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.324 0.346 psSAR8g [W/kg] 0.119 0.120 psSAR10g [W/kg] 0.104 0.104 psPDab (4.0cm2, sq) [W/m2] 2.400 Power Drift [dB] 0.04 0.03 M2/M1 [%] 54.6 Dist 3dB Peak [mm] 7.8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 73 of 91 ID: 017 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-8 7.0GHz 802.11ax(160M)_Body_Bottom Surface_CH 207_0mm_Main Ambient temperature: 22.3°C; Liquid temperature: 21.2°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6985.0, 207 5.85 6.536 33.778 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-10 2022-08-10 psSAR1g [W/kg] 0.241 0.259 psSAR8g [W/kg] 0.086 0.088 psSAR10g [W/kg] 0.075 0.075 psPDab (4.0cm2, sq) [W/m2] 1.750 Power Drift [dB] -0.02 -0.04 M2/M1 [%] 52.1 Dist 3dB Peak [mm] 7.6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 74 of 91 ID: 018 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-5 6.2GHz 802.11ax(160M)_Body_Bottom Surface_CH 47_0mm_Aux Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6185.0, 47 5.65 5.686 34.738 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.260 0.300 psSAR8g [W/kg] 0.098 0.107 psSAR10g [W/kg] 0.086 0.093 psPDab (4.0cm2, sq) [W/m2] 2.130 Power Drift [dB] 0.04 0.05 M2/M1 [%] 56.8 Dist 3dB Peak [mm] 7.8 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 75 of 91 ID: 019 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-6 6.5GHz 802.11ax(160M)_Body_Bottom Surface_CH 111_0mm_Aux Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6505.0, 111 5.65 6.023 34.354 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.243 0.270 psSAR8g [W/kg] 0.089 0.092 psSAR10g [W/kg] 0.077 0.079 psPDab (4.0cm2, sq) [W/m2] 1.840 Power Drift [dB] 0.03 0.02 M2/M1 [%] 55.3 Dist 3dB Peak [mm] 7.2 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 76 of 91 ID: 020 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-7 6.7.0GHz 802.11ax(160M)_Body_Bottom Surface_CH 175_0mm_Aux Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6825.0, 175 5.65 6.364 33.97 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-09 2022-08-09 psSAR1g [W/kg] 0.260 0.270 psSAR8g [W/kg] 0.095 0.094 psSAR10g [W/kg] 0.083 0.081 psPDab (4.0cm2, sq) [W/m2] 1.820 Power Drift [dB] 0.02 -0.04 M2/M1 [%] 54.3 Dist 3dB Peak [mm] 7.6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 77 of 91 ID: 021 Report No. : TESA2207000203EN Measurement Report for Framework(NB), U-NII-8 7.0GHz 802.11ax(160M)_Body_Bottom Surface_CH 207_0mm_Aux Ambient temperature: 22.3°C; Liquid temperature: 21.2°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Frequency [MHz], Conversion Factor TSL Conductivity [S/m] TSL Permittivity Channel Number Flat, HSL Bottom Surface, 0.00 6985.0, 207 5.85 6.536 33.778 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Zoom Scan Grid Extents [mm] 85.0 x 136.0 22.0 x 22.0 x 22.0 Grid Steps [mm] 8.5 x 8.5 3.4 x 3.4 x 1.4 Sensor Surface [mm] 3.0 1.4 Measurement Results Area Scan Zoom Scan Date 2022-08-10 2022-08-10 psSAR1g [W/kg] 0.254 0.274 psSAR8g [W/kg] 0.092 0.093 psSAR10g [W/kg] 0.080 0.080 psPDab (4.0cm2, sq) [W/m2] 1.860 Power Drift [dB] 0.02 0.05 M2/M1 [%] 53.5 Dist 3dB Peak [mm] 7.3 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 78 of 91 ID: 022 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-5, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 15 (6025.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] 5G, Air Bottom Surface, 2.00 Hardware Setup Phantom Probe, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 Scans Setup Scan Type Grid Extents [mm] Grid Steps [lambda] Sensor Surface [mm] Measurement Results Scan Type Date Avg. Area [cm2] psPDn+ [W/m2] psPDtot+ [W/m2] psPDmod+ [W/m2] Emax [V/m] Power Drift [dB] Conversion Factor 1.0 DAE, Calibration Date DAE4 Sn558, 2021-11-23 5G Scan 100.0 x 100.0 0.0625 x 0.0625 2.0 5G Scan 2022-08-11 4.00 2.46 3.68 4.23 59.2 -0.01 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 79 of 91 ID: 023 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-5, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 47 (6185.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] 5G, Air Bottom Surface, 2.00 Hardware Setup Phantom Probe, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 Scans Setup Scan Type Grid Extents [mm] Grid Steps [lambda] Sensor Surface [mm] Measurement Results Scan Type Date Avg. Area [cm2] psPDn+ [W/m2] psPDtot+ [W/m2] psPDmod+ [W/m2] Emax [V/m] Power Drift [dB] Conversion Factor 1.0 DAE, Calibration Date DAE4 Sn558, 2021-11-23 5G Scan 100.0 x 100.0 0.0625 x 0.0625 2.0 5G Scan 2022-08-11 4.00 1.41 2.74 3.16 45.5 0.06 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 80 of 91 ID: 024 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-6, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 111 (6505.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-11 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 1.69 psPDtot+ [W/m2] 2.76 psPDmod+ [W/m2] 3.27 Emax [V/m] 56.0 Power Drift [dB] -0.06 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 81 of 91 ID: 025 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-7, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 175 (6825.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-11 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 1.60 psPDtot+ [W/m2] 3.36 psPDmod+ [W/m2] 4.00 Emax [V/m] 53.2 Power Drift [dB] -0.02 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 82 of 91 ID: 026 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-8, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 207 (6985.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-11 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 1.18 psPDtot+ [W/m2] 2.91 psPDmod+ [W/m2] 3.46 Emax [V/m] 47.7 Power Drift [dB] -0.05 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 83 of 91 ID: 027 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-5, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 15 (6025.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] 5G, Air Bottom Surface, 2.00 Hardware Setup Phantom Probe, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 Scans Setup Scan Type Grid Extents [mm] Grid Steps [lambda] Sensor Surface [mm] Measurement Results Scan Type Date Avg. Area [cm2] psPDn+ [W/m2] psPDtot+ [W/m2] psPDmod+ [W/m2] Emax [V/m] Power Drift [dB] Conversion Factor 1.0 DAE, Calibration Date DAE4 Sn558, 2021-11-23 5G Scan 100.0 x 100.0 0.0625 x 0.0625 2.0 5G Scan 2022-08-12 4.00 1.76 2.62 3.63 57.3 0.01 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 84 of 91 ID: 028 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-5, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 47 (6185.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] 5G, Air Bottom Surface, 2.00 Hardware Setup Phantom Probe, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 Scans Setup Scan Type Grid Extents [mm] Grid Steps [lambda] Sensor Surface [mm] Measurement Results Scan Type Date Avg. Area [cm2] psPDn+ [W/m2] psPDtot+ [W/m2] psPDmod+ [W/m2] Emax [V/m] Power Drift [dB] Conversion Factor 1.0 DAE, Calibration Date DAE4 Sn558, 2021-11-23 5G Scan 100.0 x 100.0 0.0625 x 0.0625 2.0 5G Scan 2022-08-12 4.00 1.06 2.00 2.84 57.9 0.03 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 85 of 91 ID: 029 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-6, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 111 (6505.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-12 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 0.918 psPDtot+ [W/m2] 1.83 psPDmod+ [W/m2] 2.31 Emax [V/m] 44.5 Power Drift [dB] -0.03 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 86 of 91 ID: 030 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-7, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 143 (6665.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-12 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 0.756 psPDtot+ [W/m2] 1.12 psPDmod+ [W/m2] 1.51 Emax [V/m] 39.4 Power Drift [dB] 0.03 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 87 of 91 ID: 031 Report No. : TESA2207000203EN Measurement Report for Framework, Bottom Surface, U-NII-8, IEEE 802.11ax (160MHz, MCS0, 90pc duty cycle), Channel 207 (6985.0 MHz) Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor 5G, Air Bottom Surface, 2.00 1.0 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 DAE4 Sn558, 2021-11-23 Scans Setup Scan Type 5G Scan Grid Extents [mm] 100.0 x 100.0 Grid Steps [lambda] 0.0625 x 0.0625 Sensor Surface [mm] 2.0 Measurement Results Scan Type 5G Scan Date 2022-08-12 Avg. Area [cm2] 4.00 psPDn+ [W/m2] 1.14 psPDtot+ [W/m2] 1.98 psPDmod+ [W/m2] 2.30 Emax [V/m] 48.9 Power Drift [dB] -0.04 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 88 of 91 12 SAR SYSTEM CHECK RESULTS Report No. : TESA2207000203EN Measurement Report for Device, FRONT, Validation band, CW, Channel 6500 (6500.0 MHz), SN:1006 Ambient temperature: 22.4°C; Liquid temperature: 21.3°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor TSL Conductivity [S/m] Flat, HSL FRONT, 5.00 5.65 6.017 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Grid Extents [mm] 36.0 x 51.0 Grid Steps [mm] 8.5 x 8.5 Sensor Surface [mm] 3.0 Measurement Results Area Scan Date 2022-08-09 psSAR1g [W/kg] 25.4 psSAR8g [W/kg] 6.40 psSAR10g [W/kg] 5.29 psPDab (4.0cm2, sq) [W/m2] Power Drift [dB] -0.00 M2/M1 [%] Dist 3dB Peak [mm] TSL Permittivity 34.36 Zoom Scan 22.0 x 22.0 x 22.0 3.4 x 3.4 x 1.4 1.4 Zoom Scan 2022-08-09 29.8 6.78 5.57 136 -0.03 50.2 6.4 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 89 of 91 Report No. : TESA2207000203EN Measurement Report for Device, FRONT, Validation band, CW, Channel 7000 (7000.0 MHz), SN:1007 Ambient temperature: 22.3°C; Liquid temperature: 21.2°C Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] Conversion Factor TSL Conductivity [S/m] Flat, HSL FRONT, 5.00 5.85 6.552 Hardware Setup Phantom Probe, Calibration Date DAE, Calibration Date ELI EX3DV4 - SN7466, 2022-01-26 DAE4 Sn558, 2021-11-23 Scans Setup Area Scan Grid Extents [mm] 36.0 x 45.0 Grid Steps [mm] 8.5 x 8.5 Sensor Surface [mm] 3.0 Measurement Results Area Scan Date 2022-08-10 psSAR1g [W/kg] 23.7 psSAR8g [W/kg] 5.76 psSAR10g [W/kg] 4.75 psPDab (4.0cm2, sq) [W/m2] Power Drift [dB] 0.03 M2/M1 [%] Dist 3dB Peak [mm] TSL Permittivity 33.76 Zoom Scan 22.0 x 22.0 x 22.0 3.4 x 3.4 x 1.4 1.4 Zoom Scan 2022-08-10 27.2 5.96 4.88 119 -0.03 58.3 5.7 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 90 of 91 13 PD SYSTEM CHECK RESULT Report No. : TESA2207000203EN Measurement Report for Device, FRONT, Validation band, CW, Channel 10000 (10000.0 MHz), SN:1021 Exposure Conditions Phantom Section, TSL Position, Test Distance [mm] 5G, Air FRONT, 10.00 Hardware Setup Phantom Probe, Calibration Date mmWave - 1096 EUmmWV4 - SN9579_F1-55GHz, 2021-10-06 Scans Setup Scan Type Grid Extents [mm] Grid Steps [lambda] Sensor Surface [mm] Measurement Results Scan Type Date Avg. Area [cm2] psPDn+ [W/m2] psPDtot+ [W/m2] psPDmod+ [W/m2] Emax [V/m] Power Drift [dB] Conversion Factor 1.0 DAE, Calibration Date DAE4 Sn558, 2021-11-23 5G Scan 120.0 x 120.0 0.25 x 0.25 10.0 5G Scan 2022-08-11 4.00 48.2 48.4 48.7 141 -0.01 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Report No.: TESA2207000203EN Page: 91 of 91 14 APPENDIXES Refer to separated files for the following appendixes. 14.1 SAR_Appendix A Photographs 14.2 SAR_Appendix B DAE & Probe Cal. Certificate 14.3 SAR_Appendix C Phantom Description & Dipole Cal. Certificate - End of report - Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 90 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company's findings at the time of its intervention only and within the limits of Client's instructions, if any. The Company's sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/ 134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group
References
eCFR :: 47 CFR 1.1310 -- Radiofrequency radiation exposure limits.- Federal Register :: Request Access
- eCFR :: 47 CFR 1.1310 -- Radiofrequency radiation exposure limits.
- Federal Register :: Request Access
- Federal Register :: Request Access
- eCFR :: 47 CFR 4.2 -- Availability of reports filed under this part.
Related FCC IDs:
- 2AZR6-FRANBBAT10 - Framework Computer Inc Intel Wi-Fi 6E AX211 [-FRANBBAT10] 適用於 Microsoft 365 的 Microsoft Word