P80154012N BM72-B English IM c
Claude
CROSSRAY GAS KITCHEN PRODUCT INSTALLATION MANUAL
3 Install Trolley Rear panel. Phillips Head Screw 3/16"x3/8" Qty.9 4 Phillips Head Screw 3/16"x3/8" Qty.4 Rear panel,Down Rear panel,Upper Install Door Bracket. 3
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 11 Pages, 1.47MB
Document DEVICE REPORTCrossray-Kitchen-cabinet-installation-manual ?v=1604287197CROSSRAY GAS KITCHEN PRODUCT INSTALLATION MANUAL 2B + 4B SERIES crossray.com.au | 03 9562 3455 | [email protected] 1 Side Cabinets 1 Install Casters. Phillips Head Screw 3/16"x3/8" Qty.16 2 Install Trolley side panels. Phillips Head Screw 3/16"x3/8" Qty.6 O 3 Install Trolley Rear panel. Phillips Head Screw 3/16"x3/8" Qty.9 Rear panel,Down Rear panel,Upper 4 Install Door Bracket. Phillips Head Screw 3/16"x3/8" Qty.4 5 Install middle panel. Double screw 3/16"x3/8" Qty.4 1. Install the screws. 2. Slide in the midde panel. 6 Install countertop. Phillips Head Screw M6X20 Qty.6 1. Pre-install the screws partially on the underside of the benchtop (Do not tighten to the end). 2. Position the pre-installed Screws on the cabinetHandle with care. Follow the same instruction to install the sink countertop. 7 Install Door Tilt the door to an angle. 2.Press the latch on the door, and slide the door into the hole when the latch is flush with the door support piece. 1.Tilt the door and insert to the hole on bottom. 7 finish 4B BBQ /2B BBQ cabinet 1 Install Casters. Phillips Head Screw 3/16"x3/8" Qty.16 2 Install Trolley side panels. Phillips Head Screw 3/16"x3/8" Qty.6 T 3 Install Trolley Rear panel. Phillips Head Screw 3/16"x3/8" 4B-Qty.7 2B-Qty.6 4 Install AGA separation panel . Double screw 3/16"x3/8" Qty.2 Phillips Head Screw 3/16"x3/8" Qty.2 5 Install Doors Install Doorplease refer to P6. V How to attach the cabinets together 1.Put all cabinets together.There are 4 screws, two through the top vents, and 2 through the bottom vents. Phillips Head Screw 3/16"x3/8" Qty.4 Washer Qty.4 Flange Nut3/16" Qty.4 Phillips Head Screw 2.Open the door of main cabinet, put 2 screws into the holes to fix with left cabinet as below picture shown, insert the screw close to the side of hole, as this is the most secure. Washer 3.Apply above method to fix main cabinet with right cabinet. How to adjust the height of the caster with leveling glide. 1.When you want to move the cabinet, please lift the leveling glide with wrench as shown on below image (please keep the leveling glide off the floor 3-5mm). 2.When you want to level the cabinets., please use a wrench (not included) to adjust the leveling-caster. The maximum height of adjustment is 5-6mm. 3.We recommend you use a spirit level to ensure the middle BBQ cabinet is level first, then level the side cabinets by adjusting the feet. Thermofilm Australia Pty Ltd 17 Johnston Court Dandenong South, Victoria, 3175 Australia t: 03 9562 3455 e:[email protected] 1Acrobat Distiller 5.0.5 (Windows)