Benjamin Seckinger

QUICK START

Quick start manual–master board update. 1. Have needed firmware and project files saved on computer and needed software installed View

PDF Quick Start

Quick start manual-master board update. 1. Have needed firmware and project files saved on computer and needed software installed. JLink (software for connecting to the master board, the balancer boards and the VE.bus converter)

QUICK START MANUAL–MASTER BOARD UPDATE

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 652.35KB

Document DEVICE REPORTHS business quick start manual master board update Rev.02
QUICK START MANUAL­MASTER BOARD UPDATE
1. Have needed firmware and project files saved on computer and needed software installed. JLink (software for connecting to the master board, the balancer boards and the VE.bus converter): https://bosagmy.sharepoint.com/:f:/g/ personal/hannes_baumg artner_bos-ag_com/EmaVuh0txNNviYbhl5L_FAB F-fs58i4hLgO_2Pb7D66Q?e=l34G jc
2. Connect J-link programmer to Masterboard and USB port of notebook

3. Open J-Flash V6.34h
4. Open project file (Masterboard_jflash.jflas h)

HS_business_quick_start_manual_master_board_update_Rev.02

21/11/2019 Page 1 of 2

S BALANCE OF STORAGE SYSTEMS AG / BÖTTGERSTR. 2/2 / 89231 Neu-Ulm / GERMANY / FON: +49(0) 731 72 54 41 07 / MAIL: [email protected] / WEB: WWW.BOS-AG.COM

5. Screen must look like this, left side shows "MCU ST STM32..."

6. Open firmware file (.hex file)
7. Program new firmware by pushing F7 or by going to targetproduction programming
8. Successful update
9. Make sure to disconnect the programmer after successful update!

HS_business_quick_start_manual_master_board_update_Rev.02

21/11/2019 Page 2 of 2

BOS BALANCE OF STORAGE SYSTEMS AG / BÖTTGERSTR. 2/2 / 89231 Neu-Ulm / GERMANY / FON: +49(0) 731 72 54 41 07 / MAIL: [email protected] / WEB: WWW.BOS-AG.COM


Microsoft Word für Office 365

Search Any Device: