en 300328v020200a

User Manual

Kontakt Micro-Location Sp. z o.o. TAGBEACON Kontakt.io Tag Beacon 2ADAO-TAGBEACON 2ADAOTAGBEACON tagbeacon

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 3 Pages, 59.24KB

Document DEVICE REPORTGetApplicationAttachment.html?id=3781504
Kontakt.io Tag Beacon UserManual
Turning on/off and maintenance
Device may be turned on/off on demand using switch, which is the only physical switchinthisproduct.Thispreventsdevicefromdischargingwhennotused.Whenturned onTagBeaconworksconstantlyandisreadytobeusedin`outofthebox'manner.They arereadytoperformsinceprogrammedandassembled. Incaseofpossiblemalfunctioningusersareadvisedtocontacttechnicalsupporttoget properreplacements(email:[email protected]).Themanufactureranddevices'names arementionedontheproductlabelonthebeacons'casings.

European HQ: Kontakt.io Inc., Poland Stoczniowców 3, 30-709 Kraków,Poland
NIPUENo(VAT)PL9452176914

Kontakt.io Inc. : 222 Broadway NewYork,NY10038
[email protected]

Kontakt.io GmbH Paul-Lincke-Ufer 39/40 10999 Berlin, Germany

Installation Slipalanyardthroughtheholes,putitinsideyourbelongings,orstickyourTagBeaconto thewallforthemostlowprofilelookabeaconcanpossiblyhave. Features
 Technology indevice:BLE  Power Saving Mode: Tag Beacons broadcast less frequently when they don't
move(thankstomotionsensor)orsimplyswitchthemoffwhenyoudon'tusethem
WARNING Kontakt Tag Beacons contain electronic elements and batteries which should be properlydisposed.Ifyoueverwanttoutilisebeacons,pleasecontactmanufacturerfirst. Switchingtheoriginalbatterywithoneofadifferenttypemightcauseariskofexplosion.

European HQ: Kontakt.io Inc., Poland Stoczniowców 3, 30-709 Kraków,Poland
NIPUENo(VAT)PL9452176914

Kontakt.io Inc. : 222 Broadway NewYork,NY10038
[email protected]

Kontakt.io GmbH Paul-Lincke-Ufer 39/40 10999 Berlin, Germany

FCC Caution This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.



Related FCC IDs:

Search Any Device: