AirWave 8.3.0.1 Supported Devices Matrix

Supported Infrastructure Devices

Supported, Infrastructure, Devices

HPE Aruba

AirWave 8.3.0.1 Supported Devices Matrix

Jun 15, 2023 — AirWave Switch Configuration Guide. ... AirWave 8.2 introduces support for pairs of HP Unified Wired-WLAN (UWW) devices operating in HA mode.

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 25 Pages, 153.90KB

Document DEVICE REPORTAirWave 8.3.0.1 Supported Devices Matrix
AirWave 8.3.0.1
Supported Infrastructure Devices
AirWave provides a range of features to manage network infrastructure devices from Aruba Networks and other vendors. This document describes the supported product families, software versions, and feature set for the following product sets:
n Aruba Devices n Hewlett Packard Enterprise Devices n Other Third-Party Vendor Devices
l Cisco® Devices l Juniper® Devices l Meru® Devices l Motorola® Devices l Other Third-Party Devices with Monitoring Support n Other Switches
Aruba Devices
This release of AirWave supports management of global configuration profiles or settings, monitoring, and software upgrades on the Aruba devices and software described in the following sections.
ArubaOS
AirWave supports all Aruba controllers and most access points (APs) that are running the following ArubaOS versions:
n 6.4.4.0 n 6.5.0.0, 6.5.1.0, 6.5.2.0, 6.5.3.0, 6.5.4.0, 6.5.4.18, 6.5.4.20, 6.5.4.22, 6.5.4.23, and 6.5.4.24 n 8.0.0.0 and 8.0.1.0 n 8.1.0.x n 8.2.0.x and 8.2.1.x n 8.3.0.x n 8.4.0.x n 8.5.0.x n 8.6.0.21 n 8.7.0.x n 8.7.1.x n 8.8.0.x n 8.9.0.x n 8.10.0.7 n 8.11.0.x n 8.11.1.0

AirWave 8.3.0.1 | Supported Infrastructure Devices

Rev. 01 | June 2023

AirWave also supports Aruba unified APs, which are APs factory-installed with ArubaOS 6.5.2.0 or a later. A unified AP can be configured to operate as either a campus AP or a remote AP when that device is first provisioned. For more information on unified APs, refer to the ArubaOS 6.5.2.0 Release Notes.

FIPS Support
ArubaOS 6.x supports FIPS for Aruba controllers, 7000 Series, 7200 Series, and 7280 models for ArubaOS version 6.5.4.24-FIPS. ArubaOS 8.x supports FIPS for Aruba controllers, 7000 Series, 7200 Series, 7280, and 9000 Series models for below ArubaOS versions.
n 8.5.0.13-FIPS n 8.6.0.21-FIPS n 8.7.1.4-FIPS n 8.8.0.1-FIPS n 8.9.0.3-FIPS n 8.10.0.7-FIPS n 8.11.1.0-FIPS
For the complete list of products that have reached the end of life milestone and are not supported, refer to http://www.arubanetworks.com/support-services/end-of-life/ Table 1 lists the supported devices and the tested ArubaOS firmware versions.

Table 1: Supported ArubaOS Devices Device

Validated Up To

AP-503

8.11.1.0

AP-615

8.11.0.0

AP-655

8.10.0.0

AP-584, AP-585, AP-585EX, AP-587, and AP- 8.10.0.0 587EX

AP-635

8.9.0.0

AP-565, AP-565EX, AP-567, and AP-567EX

8.8.0.0

AP-505H

8.8.0.0

AP-570 Series

8.8.0.0

AP-555

8.7.0.0

AP-534 and AP-535,

8.8.0.0

AP-514 and AP-515

8.7.0.0

AP-518

8.8.0.0

AP-504 and AP-505

8.8.0.0

AP-387

8.7.0.0

2

AirWave 8.3.0.1 | Supported Infrastructure Devices

Device

Validated Up To

AP-374, AP-375, and AP-377

6.5.4.16, 8.8.0.0

AP-375ATEX

8.8.0.0

AP-365 and AP-367

6.5.4.16, 8.8.0.0

AP-344 and AP-345 with Dual 5-GHz Mode 8.8.0.0

AP-334 and AP-335

6.5.4.16, 8.8.0.0

AP-324 and AP-325

6.5.4.16, 8.8.0.0

AP-318

8.8.0.0

AP-314 and AP-315

6.5.4.16, 8.8.0.0

AP-304 and AP-305

6.5.4.16, 8.7.0.0

AP-303

8.8.0.0

AP-303H, and AP-303HR

6.5.4.16, 8.8.0.0

AP-303P

8.3.0.0

AP-277

6.5.4.16, 8.7.0.0

AP-274 and AP-275

6.5.4.16, 8.7.0.0

AP-228

6.5.4.16, 8.7.0.0

AP-224 and AP-225

6.5.4.16, 8.7.0.0

AP-214 and AP-215

6.5.4.16, 8.7.0.0

AP-207

6.5.4.16, 8.7.0.0

AP-205H

6.5.4.16, 8.7.0.0

AP-204 and AP-205

6.5.4.16, 8.7.0.0

AP-203H

6.5.4.16, 8.8.0.0

AP-203-R and AP-203RP

6.5.4.16, 8.8.0.0

AP-175

6.5.4.16, 8.6.0.0

AP-134 and AP-135

6.5.4.16, 8.6.0.0

AP-124 and AP-125

6.5.4.16, 6.4.0.0

AP-114 and AP-115

6.5.4.16, 8.6.0.0

AP-104 and AP-105

6.5.4.16, 8.6.0.0

AP-103

6.5.4.16, 8.6.0.0

AirWave 8.3.0.1 | Supported Infrastructure Devices

3

Device

Validated Up To

AP-103H

6.5.4.16, 8.3.0.0

AP-92 and AP-93

6.5.4.16, 8.2.0.0

AP-93H

6.5.4.16, 8.2.0.0

AP-68

6.5.4.16, 8.7.0.0

3000 Series Controller

6.4.4.22

7005 Controller

6.5.4.16, 8.7.0.0

7010 Controller

6.5.4.16, 8.7.0.0

7024 Controller

6.5.4.16, 8.7.0.0

7030 Controller

6.5.4.16, 8.7.0.0

7200 Series Controller

6.5.4.16, 8.7.0.0

7280 Controller

6.5.4.16, 8.7.0.0

9004 Branch Controller

8.7.0.0

9012 Branch Controller

8.7.0.0

9240, 9240 Silver, and 9240 Gold Controller 8.10.0.0

The End-Of-Life devices and ArubaOS versions listed on the EOL page http://www.arubanetworks.com/support-services/end-of-life/ are not tested or supported by AirWave. Aruba recommends deploying the devices only with the supported platforms and ArubaOS versions.

Aruba Instant
Table 2 lists the Instant firmware versions and functions supported by AirWave. AirWave also supports the Aruba RAP-100 Series and RAP-3 Series remote access points.

Table 2: Supported Aruba Instant Firmware Versions and Functions

Instant Version

Template Config

Support for

Instant GUI Config

Instant 8.11.1.0 AirWave 8.2.15.2

AirWave 8.2.15.2

Instant 8.11.0.0 AirWave 8.2.15.0

AirWave 8.2.15.0

Instant 8.10.0.0 AirWave 8.2.14.1

AirWave 8.2.14.1

Instant 8.9.0.0 AirWave 8.2.14.0

AirWave 8.2.14.0

Instant 8.9.0.0 AirWave 8.2.13.1

AirWave 8.2.13.1

4

AirWave 8.3.0.1 | Supported Infrastructure Devices

Instant Version

Template Config

Instant 8.8.0.0 Instant 8.8.0.0 Instant 8.7.1.0 Instant 8.7.0.0 Instant 8.7.0.0 Instant 8.6.0.4 Instant 8.6.0.0 Instant 8.5.0.2 Instant 8.5.0.0 Instant 8.5.0.0 Instant 8.4.0.1 Instant 8.4.0.0 Instant 8.3.0.0 Instant 8.3.0.0 Instant 6.5.4.0 Instant 6.5.4.0 Instant 6.5.3.0 Instant 6.5.2.0 Instant 4.3.1.0 Instant 4.3.0.0 Instant 4.2.4.0 Instant 4.2.3.0

AirWave 8.2.13.0 AirWave 8.2.12.1 AirWave 8.2.12.0 AirWave 8.2.11.2 AirWave 8.2.11.1 AirWave 8.2.11.0 AirWave 8.2.10.1 AirWave 8.2.10.0 AirWave 8.2.9.1 AirWave 8.2.9.0 AirWave 8.2.8.2 AirWave 8.2.8.1 AirWave 8.2.7.1 AirWave 8.2.6.1 AirWave 8.2.5.1 AirWave 8.2.5.0 AirWave 8.2.4.1 AirWave 8.2.4.0 AirWave 8.2.3.1 AirWave 8.2.3.0 AirWave 8.2.1.0 AirWave 8.2.0.0

Support for

Instant GUI Config AirWave 8.2.13.0 AirWave 8.2.12.1 AirWave 8.2.12.0 AirWave 8.2.11.2 AirWave 8.2.11.1 AirWave 8.2.11.0 AirWave 8.2.10.1 AirWave 8.2.10.0 AirWave 8.2.9.1 AirWave 8.2.9.0 AirWave 8.2.8.2 AirWave 8.2.8.1 AirWave 8.2.7.1 AirWave 8.2.6.1 AirWave 8.2.5.1 AirWave 8.2.5.0 AirWave 8.2.4.1 AirWave 8.2.4.0 AirWave 8.2.3.1 AirWave 8.2.3.0 AirWave 8.2.2.0 AirWave 8.2.2.0

n Starting with 6.4.3.x-4.2, Instant software does not support IAP-92 and IAP-93.
n Management of FIPS enabled IAP is not supported on both non-FIPS & FIPS-enabled AirWave servers.

AirWave 8.3.0.1 | Supported Infrastructure Devices

5

Aruba Switches
AirWave supports monitoring, template configuration, and firmware changes on the Aruba switches listed in Table 3. On these switches, you can set up device-specific triggers and alerts and designate them as trap receivers. If you want to see the SNMP traps, go to the System > Syslog & Traps page. In addition, you can push a complete configuration profile using templates to Aruba switches that have a factory-default configuration, or you can send configuration jobs using switch CLI commands and snippets to switches in a device group.
In VisualRF, these Aruba switches appear in the VisualRF product catalog. However, their utilization values will be 0 because AirWave does not get utilization values for these devices.

Table 3: Supported Aruba Switches

Device

Monitoring

Aruba 2530YA Switch Series

Yes

Aruba 2530YB Switch Series

Yes

Aruba 2540 Switch Series

Yes

Aruba 2620 Switch Series

Yes

Aruba 2920 Switch Series

Yes

Aruba 2930F Switch Series

Yes

Aruba 2930M Switch Series

Yes

Aruba 3800 Switch Series

Yes

Aruba 3810 Switch Series

Yes

Aruba 5400R zl2 Switch Series Yes

ArubaOS-CX 4100 Switch

Yes

Series

ArubaOS-CX 6000 Switch

Yes

Series

ArubaOS-CX 6100 Switch

Yes

Series

ArubaOS-CX 6200 Switch

Yes

Series

ArubaOS-CX 6200v2 Switch

Yes

Series

ArubaOS-CX 6300 Switch

Yes

Series

ArubaOS-CX 6300M Switch

Yes

Series

ArubaOS-CX 6400 Switch

Yes

Series

Configuration Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No No No No
No No No No

Firmware Upgrade Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No
No
No
No
No No
No
No

Validated Up To YA.16.11.0010 YB.16.11.0010 YC.16.11.0010 RA.16.11.0010 WB.16.11.0010 WC.16.11.0010 WC.16.11.0010 KA.16.11.0010 KB.16.11.0010 KB.16.11.0010 RL.10.11.1005
PL.10.11.1005 PL.10.11.1005 ML.10.11.1005
ML.10.11.1005 FL.10.11.1005 FL.10.11.1005 FL.10.11.1005

6

AirWave 8.3.0.1 | Supported Infrastructure Devices

Device
ArubaOS-CX 8100 Switch Series
ArubaOS-CX 8320 Switch Series
ArubaOS-CX 8325 Switch Series
Aruba OS-CX 8360 Switch Series
Aruba OS-CX 8400 Switch Series
ArubaOS-CX 9300 Switch Series
Aruba OS-CX 10000 Switch Series

Monitoring Yes Yes

Configuration No No

Firmware Upgrade No
No

Validated Up To LL.10.11.1005 TL.10.11.1005

Yes

No

No

GL.10.11.1005

Yes

No

No

LL.10.11.1005

Yes

No

No

XL.10.11.1005

Yes

No

No

CL.10.11.1005

Yes

No

No

DL.10.11.1005

AirWave 8.3.0.1 | Supported Infrastructure Devices

7

Aruba Mobility Conductor Appliances
AirWave supports the following devices running ArubaOS 8.0.0.0 and later:
n Mobility Conductor Hardware Appliance MM-HW-1K, MM-HW-5K, and MM-HW-10K n Mobility Conductor Virtual Appliance MM-VA

Aruba Mobility Access Switches
AirWave supports profile configuration, monitoring, and software upgrades on the Aruba Mobility Access Switches. In addition to the port statistics supported for most Ethernet switches with the supported firmware described below, AirWave also tracks the activity of authenticated wired clients on Aruba switches.

Table 4: Supported Aruba Mobility Access Switches

Device

Validated up to

S1500

7.4.0.0

S2500 S3500

7.4.0.0 7.4.0.0

Aruba AirMesh
Aruba AirMesh outdoor products running MeshOS 4.2 are supported for monitoring and software upgrades.

Table 5: Supported Aruba MeshOS Devices

Device

Validated up to

MSR1200

MeshOS 4.2

MSR2000

MeshOS 4.2

MSR4000

MeshOS 4.2

MST200

MeshOS 4.2

Hewlett Packard Enterprise Devices
The firmware versions for the HPE devices listed in Table 6 represent the latest firmware version verified as fully supported by AirWave 8.3.0.1. You can select these supported wireless devices in the VisualRF. You can set up these devices to send traps to AirWave and view the SNMP traps on the System > Syslog & Traps page. AirWave supports switch configuration only for the following:
n Mobility Access Switches running ArubaOS (AOS) 7.2.0.0 or higher n Switches running AOS 16.01 or higher
For more information on configuring and managing MAS and AOS-S switches via AirWave, refer to the AirWave Switch Configuration Guide.

8

AirWave 8.3.0.1 | Supported Infrastructure Devices

n AirWave does not support MSM APs running in autonomous mode.
n Informal testing shows that AirWave supports some devices running more recent versions of firmware, but full support for these later versions is not guaranteed.

Table 6: HPE Device Support Model MSM310 and MSM310R MSM313 and MSM313R MSM317 MSM318 MSM320 and MSM320R MSM323 and MSM323R MSM325 MSM335 MSM410 MSM417* MSM422 MSM425* MSM430 MSM460 MSM466 and 466R MSM525* MSM527* MSM560* MSM710 Controller MSM720 Controller MSM730 Controller MSM750 Controller MSM760 Controller MSM765 Controller

Firmware Validated Up To 6.5.1.0 6.5.10 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0 6.5.1.0

AirWave 8.3.0.1 | Supported Infrastructure Devices

9

Model ProCurve 420 ProCurve 530 ProCurve 2626-PWR 830 Unified Wired-WLAN Switch* 850 Unified Wired-WLAN Switch* 870 Unified Wired-WLAN Switch* HPE WESM controllers & APs xl HPE WESM controllers & APs zl HPE 1405 Switch Series HPE 1420 Switch Series HPE 1620 Switch Series HPE 1820 Switch Series HPE 1850 Switch Series HPE 1910 Switch Series HPE 1920 Switch Series HPE 1950 Switch Series HPE 3100 Switch Series HPE 3600 Switch Series HPE 5120 Switch Series HPE 5130 Switch Series HPE 5140 EI Switch Series HPE 5140 HI Switch Series HPE 5500 Switch Series HPE 5510 HI Switch Series HPE 5520 HI Switch Series HPE 5700 Switch Series HPE 5710 Switch Series HPE 5800 Switch Series
10

Firmware Validated Up To 2.0.38 - 2.2.5 WA.01.16-WA.02.19 H.10.35 (ROM H.08.02) 5.20.109 (Release 2607P39) 5.20.109 (Release 2607P39) 5.20.109 (Release 2607P39) WS.01.05 ­ WS.02.19 WT.01.03 ­ WT.01.28 ** ** ** ** ** ** ** 2220P02 (Comware 7) 2220P02 (Comware 7) 2220P02 (Comware 7) 2220P02 (Comware 5) 2220P02 (Comware 7) 2220P02 (Comware 7) 2220P02 (Comware 7) 2220P02 (Comware 5) ** 2220P02 (Comware 7) ** 7.1.070 (Release 2612P08) **
AirWave 8.3.0.1 | Supported Infrastructure Devices

Model

Firmware Validated Up To

HPE 5820 Switch Series

1810P13 (Comware 7)

HPE 5900 Switch Series

2220P02 (Comware 7)

HPE 5945 Switch Series

7.1.070 (Release 6555P01)

HPE 7500 Switch Series

2220P02 (Comware 7)

HPE 7500X Switch Series

2220P02 (Comware 7)

HPE 7900 Switch Series

**

HPE 10500 Switch Series

2220P02 (Comware 7)

HPE 12900E Switch Series

**

* Not supported in VisualRF. **Limited testing done. Contact Technical Support for help with any issues.

High Availability Support
AirWave 8.2 introduces support for pairs of HP Unified Wired-WLAN (UWW) devices operating in HA mode. AirWave monitors the status of each controller. After AirWave detects that a failover occurred and the APs failed over to the backup controller, AirWave displays the current status of the APs.

Monitoring Support
AirWave provides monitoring through SNMP polling with the OIDS listed in the following table.

Table 7: Monitoring Support

Model

SNMP Object ID

SysOID

HPE 7502 Switch

1.3.6.1.4.1.25506.11.1.1

.1.3.6.1.4.1.25506.11.1.269

HPE 7503S Switch

1.3.6.1.4.1.25506.11.1.2

.1.3.6.1.4.1.25506.11.1.268

HPE 7503 Switch

1.3.6.1.4.1.25506.11.1.3

.1.3.6.1.4.1.25506.11.1.270

HPE 7506 Switch

1.3.6.1.4.1.25506.11.1.4

.1.3.6.1.4.1.25506.11.1.267

HPE 7506-V Switch

1.3.6.1.4.1.25506.11.1.5

.1.3.6.1.4.1.25506.11.1.264

HPE 7510 Switch

1.3.6.1.4.1.25506.11.1.6

.1.3.6.1.4.1.25506.11.1.271

HPE 9505 Switch

1.3.6.1.4.1.25506.11.1.39

.1.3.6.1.4.1.25506.11.1.266

HPE 9508-V Switch

1.3.6.1.4.1.25506.11.1.40

.1.3.6.1.4.1.25506.11.1.265

HPE 9508 Switch

1.3.6.1.4.1.25506.11.1.41

.1.3.6.1.4.1.25506.11.1.272

HPE 9512 Switch

1.3.6.1.4.1.25506.11.1.43

.1.3.6.1.4.1.25506.11.1.144

HPE 10504 Switch

1.3.6.1.4.1.25506.11.1.86

.1.3.6.1.4.1.25506.11.1.229

HPE 10508 Switch

1.3.6.1.4.1.25506.11.1.87

.1.3.6.1.4.1.25506.11.1.230

AirWave 8.3.0.1 | Supported Infrastructure Devices

11

Model HPE 10508-V Switch HPE 10512 Switch HPE Switches HPE Routers HPE Wireless HPE Security HPE (3Com) S7503E-M HPE (3Com) S7502 HPE (3Com) S7502E HPE (3Com) S7502ESX HPE (3Com) S7503 HPE (3Com) S7503E HPE (3Com) S7503E-S HPE (3Com) S7503X HPE (3Com) S7503X-G HPE (3Com) S7504EXS HPE (3Com) S7506 HPE (3Com) S7506E HPE (3Com) S7506E-S HPE (3Com) S7506E-V HPE (3Com) S7506E-X HPE (3Com) S7506X-G HPE (3Com) S7506X-R HPE (3Com) S7508E-X HPE (3Com) S7510E HPE (3Com) S7510E-X HPE (3Com) S7510X HPE FlexNetwork 5130 HI Switch Series

SNMP Object ID 1.3.6.1.4.1.25506.11.1.88 1.3.6.1.4.1.25506.11.1.89 *.25506.11.1 * *.25506.11.2 * *.25506.11.3* *.25506.11.4 * 1.3.6.1.4.1.25506.1.1504 1.3.6.1.4.1.25506.1.52 1.3.6.1.4.1.25506.1.207 1.3.6.1.4.1.25506.1.1309 1.3.6.1.4.1.25506.1.53 1.3.6.1.4.1.25506.1.208 1.3.6.1.4.1.25506.1.370 1.3.6.1.4.1.25506.1.1560 1.3.6.1.4.1.25506.1.1836 1.3.6.1.4.1.25506.1.1308 1.3.6.1.4.1.25506.1.54 1.3.6.1.4.1.25506.1.209 1.3.6.1.4.1.25506.1.469 1.3.6.1.4.1.25506.1.210 1.3.6.1.4.1.25506.1.1306 1.3.6.1.4.1.25506.1.1837 1.3.6.1.4.1.25506.1.55 1.3.6.1.4.1.25506.1.636 1.3.6.1.4.1.25506.1.159 1.3.6.1.4.1.25506.1.1307 1.3.6.1.4.1.25506.1.1562 1.3.6.1.4.1.25506.11.1. (184 185 186 187 188 189 190 191 192 193 194 195

SysOID .1.3.6.1.4.1.25506.11.1.145 .1.3.6.1.4.1.25506.11.1.231 .1.3.6.1.4.1.25506.11.1.232 NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA

12

AirWave 8.3.0.1 | Supported Infrastructure Devices

Model
HPE FlexNetwork 5140 EI Switch Series HPE FlexNetwork 5140 HI Switch Series HPE FlexNetwork 5520 HI Switch Series HPE FlexNetwork 5600 HI Switch Series HPE FlexNetwork 7500X Switch Series

SNMP Object ID
196 197 198 199 200 201 202 203 208 209 210 211 244) NA

SysOID NA

NA

NA

NA

NA

NA

NA

1.3.6.1.4.1.25506.11.1.(1 2 3 4 5 6 256) NA

Configuration and configuration backup features are not supported in the above listed devices. Limited testing is done with simulated devices.
HPE ProCurve
HPE ProCurve switches have the following additional support through AirWave: n Automated discovery through SNMP n Model & software version identification
Other Third-Party Vendor Devices
AirWave supports the following monitoring features for other third party devices: n User monitoring data such as connection time, user name, SSID, and bandwidth n Network monitoring data, including real-time and historical bandwidth and user count metrics n Rogue detection and classification using AirWavecustomizable rules n VisualRF heatmaps and user/rogue location n Reports n Triggers and alerts In some cases, you can do basic configuration and firmware upgrades, as well as discover third-party controller and APs.
Cisco® Devices
AirWave supports Cisco devices that are running the latest verified firmware versions and have not reached the end of life milestone. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full support for these later versions is not validated.
Cisco Autonomous Access Points
AirWave provides monitoring, management, and software upgrade support for the devices listed in Table 8.

AirWave 8.3.0.1 | Supported Infrastructure Devices

13

Table 8: Supported Cisco Autonomous Access Points

Model

Validated up to

350 Series

IOS 12.3(11)JA and IOS 12.4(21a)JA1

Access Points

702 Series

IOS: 15.3(3)JD

Access Points

801 Series Integrated Access Points

IOS 12.4(25d)JA2 and IOS 15.(22)JB

819 Series Integrated Service Routers

IOS 15.6.3M5

860 Series

IOS 12.4(15)XZ, 12.4(20)T

Access Points

881 Series

IOS 12.4(21a)JA1

Access Points

881W Series IOS 12.4(21a)JA1 and IOS 15.0(1)M7 Access Points

881GW Series Access Points

IOS 12.4(21a)JA1 and IOS 15.1(4)M3

891 Series

IOS 12.4(21a)JA1 and IOS 15.0(1)M7

Access Points

1040 Series IOS 12.4(21a)JA1 Access Points

1100 Series IOS 12.4(21a)JA1 Access Points

1110 Series IOS 12.4(21a)JA1 and IOS 12.3(11)JA Access Points

1130 Series IOS 12.4(21a)JA1 Access Points

1140 Series IOS 12.4(21a)JA1 and IOS 12.3(11)JA Access Points

1200 Series IOS 12.4(21a)JA1 and IOS 12.3(11)JA Access Points

1210 Series IOS 12.4(21a)JA1 Access Points

1230 Series IOS 12.4(21a)JA1 Access Points

14

AirWave 8.3.0.1 | Supported Infrastructure Devices

Model

Validated up to

1240 Series IOS 12.4(21a)JA1 Access Points

1250 Series IOS 12.4(21a)JA1 Access Points

1260 Series IOS 12.4(21a)JA1 Access Points

1300/1400 Series Bridges

IOS 12.4(21a)JA1

1700 Series IOS 10.2.111.0 (IOS: 15.3(3)JN3) Access Points

1941W Series IOS 15.2(3)T Access Points

2700 Series IOS 10.2.111.0 (IOS: 15.3(3)JN3) Access Points

Cisco Wireless Controllers and Access Points
AirWave supports monitoring, RAPIDS, device discovery, and VisualRF for these devices, as well as configuration, firmware identification, AMP upgrade, and client monitoring-diagnostics for wireless controllers. Table 9 lists the Cisco wireless controllers and access point platforms that are supported in this release.

Table 9: Supported Cisco Wireless Controllers and Access Points

Model

Validated up to

1040 Series Access Points

8.3.102.0

1130 Series Access Points

7.6.110.0 (Bootloader: 7.0.116.0)

1140 Series Access Points

8.3.102.0

1200 Series Access Points

8.3.102.0

1550 Series Access Points

8.3.102.0

1600 Series Access Points

8.3.102.0

1700 Series Access Points

8.3.102.0

1800 Series Access Points

8.3.102.0

AirWave 8.3.0.1 | Supported Infrastructure Devices

15

Model

Validated up to

2600 Series Access Points

8.3.102.0

2700 Series Access Points

8.3.102.0

2802 Series Access Points

8.5.110.0

3500 Series Access Points

8.3.102.0

3600 Series Access Points

8.3.102.0

3700 Series Access Points

8.3.102.0

3800 Series Access Points

8.3.102.0

2100 Series Wireless Controllers

7.0.235.0 (Bootloader: 7.0.235.0)

2500 Series Wireless Controllers

8.3.102.0

4400 Series Wireless Controllers

7.0.235.0 (Bootloader: 7.0.235.0)

Aironet 4800 Series Bridges (pre-VxWorks, monitoring only)

8.65_2

5508 Wireless Controllers

8.5.110.0

5520 Wireless Controllers

8.1.131.0

5760 Wireless Controllers

3.2.0

Flex 7500 Controllers

8.3.102.0

8510 Controllers 8.5.110.0

3504 Wireless Controllers

8.10.130.0 (Bootloader: 8.5.103.0)

Catalyst 9800-40 16.12.4a Series

16

AirWave 8.3.0.1 | Supported Infrastructure Devices

Model
Cisco Catalyst 9800-80
Cisco Catalyst 9800-CL Wireless Controller for Private Cloud
Cisco Catalyst 9800-L-C
Cisco Catalyst 9120 AXI
Cisco Catalyst 9120 AXE
Cisco Catalyst 9130 AXI
Cisco Catalyst 9130 AXE
Cisco Catalyst 9105 AXW

Validated up to Limited testing done with simulator. Limited testing done with simulator.
Limited testing done with simulator. 8.10.151.0 8.10.151.0 Limited testing done with simulator. Limited testing done with simulator. Limited testing done with simulator.

Cisco Mobility Services Engine and 500 Series Access Points are not supported. The RLAN feature is not supported for Cisco Catalyst 9105 AXW.

Cisco Switches
AirWave supports automated discovery through SNMP, model and firmware version identification, and displays CDP neighbor information and extended port error statistics for the Cisco switches listed in Table 10.

Table 10: Supported Cisco Switches Model

Validated up to

C9800-L-F-K9

16.12.3

Catalyst 9400 Series Swtiches

16.06.03

Catalyst 2900 Series Switches (monitoring only)

15.0(2)SE11

Catalyst 3650 Series Switches

03.06.06E

Catalyst 3750 Series Switches

12.2(55)SE11

Catalyst 3850 Series Switches

03.06.06E

Industrial Ethernet 4000 Series Switches

15.2(4)EA5

AirWave 8.3.0.1 | Supported Infrastructure Devices

17

AirWave doesn't update the upstream device information for access points connected to Cisco switches when Cisco switches are polled when using SNMPv3. Cisco has restricted access to the BRIDGE-MIB when using SNMPv3. When you access a Cisco switch using SNMPv3, APs connected to that switch may not be able to show upstream device info. As a workaround to this issue, add SNMPv3 bridge commands to the Cisco switches in order to expose VLAN values for the MIB polled by UDT. If there are devices on a switch, add the following command for each VLAN-#:
snmp-server group <GroupName> v3 priv context
You may need to append views to the command, as follows: snmp-server group <GroupName> v3 priv context <VLAN-#> read <ViewName>
Use the match prefix parameter to all existing VLANs:
n snmp-server group <GroupName> v3 priv context vlan- match prefix n snmp-server group <GroupName> v3 priv context vlan- match prefix access
Juniper® Devices
The following Juniper controllers and APs are supported for monitoring, configuration, and software upgrades.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by AirWave 8.3.0.1. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full support for these later versions is not guaranteed.

Table 11: Supported Juniper Access Points and Wireless LAN Controllers

Model

Validated up to

WLA321

9.1.0.6.0

Access Points

WLA322

9.1.0.6.0

Access Points

WLA522

9.1.0.6.0

Access Points

WLA532

9.1.0.6.0

Access Points

WLA632

9.1.0.6.0

Access Points

WLC100 Wireless LAN Controllers

9.1.0.6.0

WLC2 Wireless LAN Controllers

9.1.0.6.0

WLC2800 Wireless LAN Controllers

9.1.0.6.0

18

AirWave 8.3.0.1 | Supported Infrastructure Devices

Model

Validated up to

WLC8 Wireless LAN Controllers

9.1.0.6.0

WLC800 Wireless LAN Controllers

9.1.0.6.0

WLC880 Wireless LAN Controllers

9.1.0.6.0

WLC JunosV Wireless LAN Controllers

9.1.0.6.0

Juniper Switch

12.3R6.6

Juniper®
Juniper switches have the following additional support through AirWave: n Automated discovery through SNMP n Model & software version identification n Rogue AP detection is supported using the Q-BRIDGE MIB
Meru® Devices
The following Meru controllers and APs are now supported in VisualRF. The firmware versions listed in the table below represents the latest firmware version verified as fully supported by AirWave 8.3.0.1. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full support for these later versions is not guaranteed.

Table 12: Meru Device Support

Model

Validated up to

AP302

6.1.1-25

AP320i

6.1.1-25

AP332i

6.1.1-25

AP433i

6.1.1-25

AP433is

6.1.1-25

AP822e

6.1.1-25

AP822i

6.1.1-25

AP832e

6.1.1-25

AirWave 8.3.0.1 | Supported Infrastructure Devices

19

Model

Validated up to

AP832i

6.1.1-25

RS4000

6.1.1-25

MC1000*

3.6.1-49

MC1550

6.1.1-25

MC3000*

3.6.1-49

MC3200

6.1.1-25

MC4200

6.1.1-25

MC5000*

3.6.1-49

FWC-200D 3.6.1-49

FWC-500D 3.6.1-49

*This version of AirWave supports monitoring for these devices.

VisualRF support for the for the AP433i, AP433e, AP433is, AP822i, and AP822e is not included in this release of AirWave.
Motorola® Devices
The following Motorola (formerly Symbol) controllers and autonomous APs are supported for monitoring, configuration, and software upgrades.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by AirWave 8.3.0.1. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full support for these later versions is not guaranteed.

Table 13: Motorola Autonomous AP, Wireless LAN Controller, and AP Support

Model

Validated up to

AP621

5.4.2.0-030R

AP622

5.4.2.0-030R

AP650

5.4.2.0-030R

AP5131

5.4.2.0-030R

AP5181

5.4.2.0-030R

AP6521*

5.4.2.0-030R

AP6522*

5.4.2.0-030R

20

AirWave 8.3.0.1 | Supported Infrastructure Devices

Model

Validated up to

AP6532*

5.7.0.0-057R

AP7131

5.4.2.0-030R

AP7161

5.4.2.0-030R

AP7532

5.8.1.0-012R

NX9600

5.8.6.0-011R

RFS4000

5.4.2.0-030R

RFS6000

5.4.2.0-030R

RFS7000

5.4.2.0-030R

WS2000

2.4.5

WS5100

3.3.4

Wing5 RFS controllers

5.4.2.0-030R

* These AP and controller models may require adjustments to the AirWave SNMP timeouts to compensate for known SNMP issues on these devices.

Other Third-Party Devices with Monitoring Support
This version of AirWave supports monitoring for a variety of devices with software versions listed in the table below.
The firmware versions listed in the table below represents the latest firmware version verified as fully supported by AirWave 8.3.0.1. Informal testing shows that AirWave supports devices running more recent versions of firmware, but full support for these later versions is not guaranteed.

Table 14: Other Supported Devices

Device

Validated up to

Arista DCS-7504N and DCS7280SRAM-48C6 switches

4.21.7M

BelAir 200

main.2005.03.29

Brocade ICX switches

08.0.20T211 and 08.0.30aT213

Ericsson APM-210 Access Point Modules

6.4.4.0-sp

Proxim AP-600/700

2.0 ­ 4.0.2

Proxim AP 2000/4000

2.0 ­ 4.0.2

AirWave 8.3.0.1 | Supported Infrastructure Devices

21

Device

Validated up to

Proxim Tsunami MP.11 QB 2.3.0 ­ 4.0.0 954-x, 2454-x, 4954-x, 5054-x

Siemens SCALANCE W1750D 6.5.0.0 - 4.3.0

Siemens SCALANCE XC208G 4.1 switches

Siemens SCALANCE XR500 switches

6.1.3

Siemens SCALANCE XR300 switches

3.2.1

Symbol 3021

04.01-23 ­ 04.02-19

Symbol 4121 and 4131

3.51-20 ­ 3.95-04

Symbol 5131/5181

1.1.0.0.045R ­ 2.5.0.0

Trapeze MXR-2, MXR-8, MXR20, MXR-2xx, MX-400, MP-3x2, and MP-422

5.0.12.2 ­ 7.0.5.6

Tropos 3/4/5210/5320/9422/9532

5.1.4.7 ­ 6.6.1.3

Other Switches
Some switches have additional support in AirWave:
Alcatel-Lucent OmniSwitchTM (6250 and 6450)
n Automated discovery through SNMP n Model & software version identification n Stack information n Firmware version 6.6.1.859.R01
Brocade
n Automated discovery through SNMP n Model & software version identification n Firmware version 08.0.20T211 and 08.0.30aT213 n Stacking
Force10
n Model & software version identification n Firmware version 8.4.2.9
Siemens Ruggedcom
n Zero Packet Loss Technology n Robust and Reliable

22

AirWave 8.3.0.1 | Supported Infrastructure Devices

n Model & software version identification AirWave 8.2.12.1 supports the following Siemens Ruggedcom models:
Layer 2 Rack Switches n RSG2100 n RSG2100P n RST2228 n RST2228P
Layer 2 Compact Switches n RS900GP n RSG920P n RSG908C n RSG910C n RSG907R n RSG909R n RST916P n RST916C
Layer 3 Multi-service Platform RX 1500/1501/1510/1511/1512/1524/1536 RX 5000
Layer 3 Edge Router RX1400
Firmware Version Boot n v4.3.0 n ROS v5.4.2 n ROX v2.13.3
Only limited testing has been performed on Seimens Ruggedcom devices.

Terminology Change
As part of advancing HPE's commitment to racial justice, we are taking a much-needed step in overhauling HPE engineering terminology to reflect our belief system of diversity and inclusion. Some legacy products and publications may continue to include terminology that seemingly evokes bias against specific groups of people. Such content is not representative of our HPE culture and moving forward, Aruba will replace racially insensitive terms and instead use the following new language:

Usage Campus Access Points + Controllers

Old Language Master-Slave

New Language Conductor-Member

AirWave 8.3.0.1 | Supported Infrastructure Devices

23

Usage Instant Access Points Switch Stack Wireless LAN Controller Firewall Configuration Types of Hackers

Old Language Master-Slave Master-Slave Mobility Master Blacklist, Whitelist Black Hat, White Hat

New Language Conductor-Member Conductor-Member Mobility Conductor Denylist, Allowlist Unethical, Ethical

24

AirWave 8.3.0.1 | Supported Infrastructure Devices

Contacting Support

Main Site

arubanetworks.com

Support Site

asp.arubanetworks.com

Airheads Social Forums and Knowledge community.arubanetworks.com Base

North American Telephone

1-800-943-4526 (Toll Free) 1-408-754-1200

International Telephone

arubanetworks.com/support-services/contact-support/

Software Licensing Site

lms.arubanetworks.com

End-of-life Information

arubanetworks.com/support-services/end-of-life/

Security Incident Response Team (SIRT) Site: arubanetworks.com/support-services/security-bulletins/ Email: [email protected]

© Copyright 2023 Hewlett Packard Enterprise Development LP 25

www.arubanetworks.com 6280 America Center Drive
San Jose, CA 95002 Phone: 1-800-WIFI-LAN (+800-943-4526)
Fax 408.752.0626
AirWave 8.3.0.1 | Supported Infrastructure Devices


madbuild

Search Any Device: