SZ22100161W16 Tengfei NX729J WiFi5G DFS NII
Morlab
Test Report DFS
Shenzhen Tengfei Technology Management Ltd. NX729J 2A9QD-NX729J 2A9QDNX729J nx729j
download (pdf)
NX729J 5 G Mobile Phone by Shenzhen Tengfei Management
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 23 Pages, 594.51KB
Document DEVICE REPORTNX729J-Test-Report-Shenzhen-Tengfei-Management-2a9qd-nx729j-ex-6-30REPORT No.SZ22100161W16 TEST REPORT APPLICANT PRODUCT NAME : Shenzhen Tengfei Technology Management Ltd. : 5G Mobile Phone MODEL NAME : NX729J BRAND NAME : REDMAGIC FCC ID : 2A9QD-NX729J STANDARD(S) : 47 CFR Part 15 Subpart E RECEIPT DATE : 2022-11-01 TEST DATE : 2022-11-07 to 2022-11-30 ISSUE DATE : 2022-12-16 Edited by: Zeng Xiaoying (Rapporteur) Approved by: Shen Junsheng (Supervisor) NOTE: This document is issued by Shenzhen Morlab Communications Technology Co., Ltd., the test report shall not be reproduced except in full without prior written permission of the company. The test results apply only to the particular sample(s) tested and to the specific tests carried out which is available on request for validation and information confirmed at our website. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 1 of 23 REPORT No.SZ22100161W16 DIRECTORY 1. Technical Information 3 1.1. Applicant and Manufacturer Information 3 1.2. Equipment Under Test (EUT) Description 3 1.3. Companion Equipment(Master) Description 5 1.4. The Channel Number and Frequency 6 1.5. Test Standards and Results 7 1.6. Environmental Conditions 7 2. 47 CFR Part 15E Requirements 8 2.1. Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) 8 Annex A Test Uncertainty 21 Annex B Testing Laboratory Information 22 Version 1.0 Change History Date 2022-12-16 Reason for change First edition MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 2 of 23 1. Technical Information REPORT No.SZ22100161W16 Note: Provide by applicant. 1.1. Applicant and Manufacturer Information Applicant: Applicant Address: Manufacturer: Manufacturer Address: Shenzhen Tengfei Technology Management Ltd. Room 3101, Building D1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Street, Nanshan, Shenzhen, China Shenzhen Tengfei Technology Management Ltd. Room 3101, Building D1, Chuangzhi Yuncheng, Liuxian Avenue, Xili Street, Nanshan, Shenzhen, China 1.2. Equipment Under Test (EUT) Description Product Name: Serial No.: Hardware Version: Software Version: Modulation Type: Modulation Mode: Operating Frequency Range: Channel Number: Antenna Type: Antenna Gain: Directional Gain: 5G Mobile Phone 1# NX729J_V1AMB NX729J_UNCommon_V3.03 OFDM 802.11a, 802.11n (HT20), 802.11n (HT40) 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80) 802.11ax (HEW20), 802.11ax (HEW40), 802.11ax (HEW80) 5180MHz5240MHz; 5260MHz5320MHz; 5500MHz5720MHz; 5745MHz-5825MHz Refer to 1.4 PIFA Antenna ANT 0: -0.2dBi; ANT 1: -0.8dBi 2.51dBiNote 2 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 3 of 23 REPORT No.SZ22100161W16 Battery Brand Name: ATL Model No.: Li3928T89P8h603285 Accessory Information: Serial No.: Capacity: N/A 2860mAh Rated Voltage: 7.78V Charge Limit: 8.9V Manufacturer: Dongguan Amperex Technology Limited AC Adapter Brand Name: N/A Model No.: STC-A59152050AC-Z Serial No.: N/A Accessory Information: Rated Output: Rated Input: 5V 3A, 9V 3A, 15V 3A, 20V 3.25A, PPS: 5.0V-11.0V 5.0A, 5.0V-20.0V 3.25A 100-240V 50/60Hz, 1.5A Manufacturer: ShenZhen KunXing Technology Co.,Ltd. USB Cable Model No.: N52111200016D Note 1: The EUT supports a MIMO function. Physically, the EUT provides two completed transmitters and two receivers for 802.11n, 802.11ac and 802.11ax modulation mode. Modulation Mode: TX Function 802.11n 2TX 802.11ac 2TX 802.11ax 2TX Note 2: According to KDB 662911 D01, the directional gain = GANT + 10log(NANT) dBi, where GANT is the maximum antenna gain in dBi, NANT is the number of outputs. Note 3: For conducted test item of each modulation mode, we recorded the test result of two antennas separately, for other conducted test items both of the two antennas were tested separately, we only recorded the worst test result (ANT0) in this report. Note 4: For a more detailed description, please refer to Specification or User's Manual supplied by the applicant and/or manufacturer. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 4 of 23 REPORT No.SZ22100161W16 1.3. Companion Equipment(Master) Description Product Name: Manufacturer: FCC ID: Serial No: Antenna Gain: Router Cisco LDK102091 FGL1848X9S5 2.1dBi MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 5 of 23 REPORT No.SZ22100161W16 1.4. The Channel Number and Frequency (U-NII-1) 5180MHz-5240MHz Bandwidth Channel Frequency (MHz) 20MHz 36 44 40MHz 38 5180 5220 5190 80MHz 42 (U-NII-2A) 5260MHz-5320MHz Bandwidth Channel 5210 Frequency (MHz) 20MHz 52 60 5260 5300 40MHz 54 80MHz 58 (U-NII-2C) 5500MHz-5720MHz Bandwidth Channel 100 108 20MHz 116 124 132 140 5270 5290 Frequency (MHz) 5500 5540 5580 5620 5660 5700 102 40MHz 118 134 5510 5590 5670 80MHz 106 138 5530 5690 (U-NII-3) 5745MHz-5825MHz Bandwidth Channel 149 20MHz 157 165 Frequency (MHz) 5745 5785 5825 40MHz 151 5775 80MHz 155 5775 Note 1: The black bold channels were selected for test. Channel 40 48 46 Channel 56 64 62 Channel 105 112 120 128 136 144 110 126 142 122 Channel 153 161 159 Frequency (MHz) 5200 5240 5230 Frequency (MHz) 5280 5320 5310 Frequency (MHz) 5520 5560 5600 5640 5680 5720 5550 5630 5710 5610 Frequency (MHz) 5765 5805 5795 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 6 of 23 1.5. Test Standards and Results REPORT No.SZ22100161W16 The objective of the report is to perform testing according to 47 CFR Part 15 Subpart E (U-NII band) for the EUT FCC ID Certification: No. Identity Document Title 1 47 CFR Part 15 (5-1-14 Edition) Radio Frequency Devices Test detailed items/section required by FCC rules and results are as below: No. Section Description Test Date Test Engineer Result Method Determination /Remark 1 15.407(h) TPC and DFS Nov. 30, 2022 Zhong Yanshan PASS No deviation Note 1: The DFS section for U-NII band is applicable to this report; the other test items are documented in a separate report. Note 2: These RF tests were performed according to the method of measurements prescribed in KDB 905462 D02 UNII DFS Compliance Procedures New Rules v02. Note 3: Additions to, deviation, or exclusions from the method shall be judged in the "method determination" column of add, deviate or exclude from the specific method shall be explained in the "Remark" of the above table. Note 4: When the test result is a critical value, we will use the measurement uncertainty give the judgment result based on the 95% confidence intervals. 1.6. Environmental Conditions During the measurement, the environmental conditions were within the listed ranges: Temperature (°C): Relative Humidity (%): Atmospheric Pressure (kPa): 15-35 30-60 86-106 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 7 of 23 REPORT No.SZ22100161W16 2. 47 CFR Part 15E Requirements 2.1. Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) 2.1.1. Requirement According to FCC section 15.407(h), (1) Transmit power control (TPC). U-NII devices operating in the 5.25-5.35 GHz band and the 5.47-5.725 GHz band shall employ a TPC mechanism. The U-NII device is required to have the capability to operate at least 6 dB below the mean EIRP value of 30 dBm. A TPC mechanism is not required for systems with an e.i.r.p. of less than 500 mW. (2) Radar Detection Function of Dynamic Frequency Selection (DFS). U-NII devices operating with any part of its 26 dB emission bandwidth in the 5.25-5.35 GHz and 5.47-5.725 GHz bands shall employ a DFS radar detection mechanism to detect the presence of radar systems and to avoid co-channel operation with radar systems. Operators shall only use equipment with a DFS mechanism that is turned on when operating in these bands. The device must sense for radar signals at 100 percent of its emission bandwidth. The minimum DFS detection threshold for devices with a maximum e.i.r.p. of 200 mW to 1 W is -64 dBm. For devices that operate with less than 200 mW e.i.r.p. and a power spectral density of less than 10 dBm in a 1 MHz band, the minimum detection threshold is -62 dBm. The detection threshold is the received power averaged over 1 microsecond referenced to a 0 dBi antenna. For the initial channel setting, the manufacturers shall be permitted to provide for either random channel selection or manual channel selection. A U-NII network will employ a DFS function to detect signals from radar systems and to avoid co-channel operation with these systems. This applies to the 5250-5350 MHz and/or 5470-5725 MHz bands.1 Within the context of the operation of the DFS function, a U-NII device will operate in either Master Mode or Client Mode. U-NII devices operating in Client Mode can only operate in a network controlled by a U-NII device operating in Master Mode.2 Tables 1 and 2 shown below summarize the information contained in sections 5.1.1 and 5.1.2. Table 1: Applicability of DFS Requirements Prior to Use of a Channel Operational Mode Requirement Master Client Without Radar Client With Radar Detection Detection Non-Occupancy Period Yes Not required Yes DFS Detection Threshold Yes Not required Yes Channel Availability Check Time Yes Not required Not required U-NII Detection Bandwidth Yes Not required Yes Table 2: Applicability of DFS requirements during normal operation MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 8 of 23 REPORT No.SZ22100161W16 Requirement DFS Detection Threshold Channel Closing Transmission Time Channel Move Time U-NII Detection Bandwidth Master Yes Yes Yes Yes Operational Mode Client Without Radar Detection Not required Yes Yes Not required Additional requirements for devices with multiple bandwidth modes Master Device or Client with Radar Detection Client Without Radar Detection U-NII Detection Bandwidth and Statistical Performance Check All BW modes must be tested Not required Channel Move Time and Channel Test using widest BW mode Test using the widest BW Closing Transmission Time available mode available for the link All other tests Any single BW mode Not required Note: Frequencies selected for statistical performance check (Section 7.8.4) should include several frequencies within the radar detection bandwidth and frequencies near the edge of the radar detection bandwidth. For 802.11 devices it is suggested to select frequencies in each of the bonded 20 MHz channels and the channel center frequency. The operational behavior and individual DFS requirements that are associated with these modes are as follows: Master Devices a) The Master Device will use DFS in order to detect Radar Waveforms with received signal strength above the DFS Detection Threshold in the 5250 - 5350 MHz and 5470 - 5725 MHz bands. DFS is not required in the 5150 - 5250 MHz or 5725 - 5825 MHz bands. b) Before initiating a network on a Channel, the Master Device will perform a Channel Availability Check for specified time duration (Channel Availability Check Time) to ensure that there is no radar system operating on the Channel, using DFS described under subsection a) above. c) The Master Device initiates a U-NII network by transmitting control signals that will enable other U-NII devices to Associate with the Master Device. d) During normal operation, the Master Device will monitor the Channel (In-Service Monitoring) to ensure that there is no radar system operating on the Channel, using DFS described under a). e) If the Master Device has detected a Radar Waveform during In-Service Monitoring as described under d), the Operating Channel of the U-NII network is no longer an Available Channel. The Master Device will instruct all associated Client Device(s) to stop transmitting on this Channel within the Channel Move Time. The transmissions during the Channel Move Time will be limited to the Channel Closing Transmission Time. f) Once the Master Device has detected a Radar Waveform it will not utilize the Channel for the MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 9 of 23 REPORT No.SZ22100161W16 duration of the Non-Occupancy Period. 3. g) If the Master Device delegates the In-Service Monitoring to a Client Device, then the combination will be tested to the requirements described under d) through f) above. Client Devices a) A Client Device will not transmit before having received appropriate control signals from a Master Device. b) A Client Device will stop all its transmissions whenever instructed by a Master Device to which it is associated and will meet the Channel Move Time and Channel Closing Transmission Time requirements. The Client Device will not resume any transmissions until it has again received control signals from a Master Device. c) If a Client Device is performing In-Service Monitoring and detects a Radar Waveform above the DFS Detection Threshold, it will inform the Master Device. This is equivalent to the Master Device detecting the Radar Waveform and d) through f) of section 5.1.1 apply. d) Irrespective of Client Device or Master Device detection the Channel Move Time and Channel Closing Transmission Time requirements remain the same. e) The client test frequency must be monitored to ensure no transmission of any type has occurred for 30 minutes. Note: If the client moves with the master, the device is considered compliant if nothing appears in the client non-occupancy period test. For devices that shut down (rather than moving channels), no beacons should appear. DFS Detection Thresholds Table 3 below provides the DFS Detection Thresholds for Master Devices as well as Client Devices incorporating In-Service Monitoring. Table 3: DFS Detection Thresholds for Master Devices and Client Devices with Radar Detection Maximum Transmit Power Value (See Notes 1, 2, and 3) EIRP 200 mill watt -64 dBm EIRP < 200 mill watt and power spectral density < 10 dBm/MHz -62 dBm EIRP < 200 mill watt that do not meet the power spectral density requirement -64 dBm Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna. Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of the test transmission waveforms to account for variations in measurement equipment. This will ensure that the test signal is at or above the detection threshold level to trigger a DFS response. Note3: EIRP is based on the highest antenna gain. For MIMO devices refer to KDB Publication 662911 D01. Response Requirements MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 10 of 23 REPORT No.SZ22100161W16 Table 4 provides the response requirements for Master and Client Devices incorporating DFS. Table 4: DFS Response Requirement Values Parameter Value Non-occupancy period Minimum 30 minutes Channel Availability Check Time 60 seconds Channel Move Time 10 seconds See Note 1. Channel Closing Transmission Time 200 milliseconds + an aggregate of 60 milliseconds over remaining 10 second period. See Notes 1 and 2. U-NII Detection Bandwidth Minimum 100% of the U-NII 99% transmission power bandwidth. See Note 3. Note 1: Channel Move Time and the Channel Closing Transmission Time should be performed with Radar Type 0. The measurement timing begins at the end of the Radar Type 0 burst. Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at the beginning of the Channel Move Time plus any additional intermittent control signals required to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10 second period. The aggregate duration of control signals will not count quiet periods in between transmissions. Note 3: During the U-NII Detection Bandwidth detection test, radar type 0 should be used. For each frequency step the minimum percentage of detection is 90 percent. Measurements are performed with no data traffic. 2.1.2. Test Description According to Section 7.2 of KDB 905462 D02 V01R01 1. Setup for Master with injection at the Master (Example Conducted Setup where UUT is a Master and Radar Test Waveforms are injected into the Master) 2. Setup for Client with injection at the Master MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 11 of 23 REPORT No.SZ22100161W16 (Example Conducted Setup where UUT is a Client and Radar Test Waveforms are injected into the Master) 3. Setup for Client with injection at the Client (Example Conducted Setup where UUT is a Client and Radar Test Waveforms are injected into the Client) MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 12 of 23 REPORT No.SZ22100161W16 2.1.3. Test Result a.Channel loading between Master and Client Test Mode Channel 11AC20SISO 5320 5500 11AC80SISO 5290 5530 Test Plot 11AC20SISO_5320 Result 48.06 43.51 36.08 35.81 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 13 of 23 REPORT No.SZ22100161W16 11AC20SISO_5500 11AC80SISO_5290 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 14 of 23 REPORT No.SZ22100161W16 11AC80SISO_5530 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 15 of 23 REPORT No.SZ22100161W16 b.DFS Detection Threshold: Test Mode Channel 11AC20SISO 5320 5500 11AC80SISO 5290 5530 Radar Type Reference Reference Reference Reference Result -62.51 -61.53 -62.51 -62.36 Limit[dbm] -59.20 -59.20 -59.20 -59.20 Verdict PASS PASS PASS PASS 11AC20SISO_5320_Reference 11AC20SISO_5500_Reference MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 16 of 23 REPORT No.SZ22100161W16 11AC80SISO_5290_Reference 11AC80SISO_5530_Reference MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 17 of 23 REPORT No.SZ22100161W16 c.Channel Closing Transmission Time and Channel Move Time: Test Mode Channel CCT[ms] Limit[ms] CMT[ms] 11AC20SISO 5320 5500 66.42 113.4 260 260 785.6 858.7 11AC80SISO 5290 5530 64.8 110.16 260 260 98.2 169.7 Limit[ms] 10000 10000 10000 10000 Verdict PASS PASS PASS PASS 11AC20SISO_5320 11AC20SISO_5500 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 18 of 23 REPORT No.SZ22100161W16 11AC80SISO_5290 11AC80SISO_5530 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 19 of 23 d.Non-Occupancy Period Test Mode Channel 11AC20SISO 5320 5500 REPORT No.SZ22100161W16 Result see test graph see test graph 11AC20SISO_5320 Limit[s] 1800 1800 Verdict PASS PASS 11AC20SISO_5500 MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 20 of 23 Annex A Test Uncertainty REPORT No.SZ22100161W16 Where relevant, the following measurement uncertainty levels have been estimated for test performed on the EUT as specified in CISPR 16-1-2: Test Items Uncertainty Bandwidth ±5% Conducted Emission ±2.44dB This uncertainty represent an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 21 of 23 REPORT No.SZ22100161W16 Annex B Testing Laboratory Information 1. Identification of the Responsible Testing Laboratory Laboratory Name: Laboratory Address: Telephone: Facsimile: Shenzhen Morlab Communications Technology Co., Ltd. FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China +86 755 36698555 +86 755 36698525 2. Identification of the Responsible Testing Location Name: Address: Shenzhen Morlab Communications Technology Co., Ltd. FL.3, Building A, FeiYang Science Park, No.8 LongChang Road, Block 67, BaoAn District, ShenZhen, GuangDong Province, P. R. China 3. Facilities and Accreditations All measurement facilities used to collect the measurement data are located at FL.3, Building A, FeiYang Science Park, Block 67, BaoAn District, Shenzhen, 518101 P. R. China. The test site is constructed in conformance with the requirements of ANSI C63.10-2013 and CISPR Publication 22; the FCC designation number is CN1192, the test firm registration number is 226174. MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 22 of 23 REPORT No.SZ22100161W16 4. Test Equipments Utilized 4.1 Conducted Test Equipments Equipment Name Serial No. Power Splitter N/A Attenuator 1 N/A Attenuator 2 N/A EXA Signal Analzyer MY53470836 MXG Vector Signal Generator MY53050961 RF Cable (30MHz-26GHz) CB01 Coaxial Cable CB02 SMA Connector CN01 Type N/A N/A N/A N9010A N5182B RF01 RF02 RF03 Manufacturer N/A N/A N/A Cal. Date N/A N/A N/A Due Date N/A N/A N/A Agilent 2022.03.01 2023.02.28 Angilent 2022.03.01 2023.02.28 Morlab N/A N/A Morlab N/A N/A HUBERSUHNER N/A N/A END OF REPORT MORLAB Shenzhen Morlab Communications Technology Co., Ltd. FL1-3, Building A, FeiYang Science Park, No.8 LongChang Road, Block67, BaoAn District, ShenZhen , GuangDong Province, P. R. China Tel: 86-755-36698555 Http://www.morlab.cn Fax: 86-755-36698525 E-mail: [email protected] Page 23 of 23
Related FCC IDs:
- 2A9QD-NX729J - Shenzhen Tengfei Technology Management Ltd. 5G Mobile Phone [-NX729J] Acrobat Distiller 9.3.2 (Windows)