cooking - De'Longhi

2020-11-22 — Dear Customer,. Thank you for having purchased and given your preferen- ce to our product. The safety precautions and recommendations reported.

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 40 Pages, 5.60MB

Document DEVICE REPORTEN-F6T0DA001X-DE6060MD im
DE'LONGHI
COOKING
INSTALLATION and SERVICE INSTRUCTIONS USE and CARE INSTRUCTIONS
DE6060MD
BUILT-IN DOUBLE TOWER OVEN
distributed by
DeLonghi Australia Pty Ltd DeLonghi New Zealand Ltd

Dear Customer,
Thank you for having purchased and given your preference to our product.
The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the features offered by your appliance.
Please keep this booklet in a safe place. It may be useful in future, either to yourself or to others in the event that doubts should arise relating to its operation.
This appliance must be used only for the task it has explicitly been designed for, that is for cooking foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous.
The manufacturer declines all responsibility in the event of damage caused by improper, incorrect or illogical use of the appliance or be faulty installation.
This appliance has been designed and constructed in accordance with the following codes and specifications: AS/NZS 60335.1 General Requirements for Domestic electrical appliances AS/NZS 60335.2.6 Particular Requirements for Domestic electrical cooking appliances AS/NZS CISPR 14.1 Electromagnetic Compatibility Requirements.
PRODUCT LABEL
2

Important: This appliance is designed and manufactured solely for the cooking of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a commercial environment. The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a semi commercial, commercial or communal environment.
FIRST USE OF THE OVENS It is advised to follow these instructions:  Furnish the interior of the oven as described at chapters "USE AND CARE" and
"CLEANING AND MAINTENANCE".  Switch on the empty oven on max to eliminate grease from the heating elements.  Let the oven cool down and clean the interior of the oven with a cloth soaked in
water and neutral detergent, then dry carefully.
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS FOR USE OF ELECTRICAL APPLIANCES Use of any electrical appliance implies the necessity to follow a series of fundamental rules. In particular:  Never touch the appliance with wet hands or feet.  Do not operate the appliance barefooted.  The appliance is not intended for use by young children or infirm persons without
supervision.  Young children should be supervised to ensure they do not play with the appliance. The manufacturer cannot be held responsible for any damages caused by improper, incorrect or illogical use of the appliance.
3

IMPORTANT PRECAUTIONS AND RECOMMENDATIONS
After having unpacked the appliance, check to ensure that it is not damaged and that the oven door closes correctly. In case of doubt, do not use it and consult your supplier or a professionally qualified technician. Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries.
 Some appliances are supplied with a protective film on steel and aluminium parts. This film must be removed before using the appliance.
 Do not attempt to modify the technical characteristics of the appliance as this may become dangerous to use.
 Do not carry out cleaning or maintenance operations on the appliance without having previously disconnected it from the electric power supply.
 After use, ensure that the knobs are in the off position.
 Keep children away from the appliance when it is in use.
 WARNING: Accessible parts will become hot when in use. To avoid burns and scalds, young children should be kept away.
 Young children should be supervised to ensure that they do not play with the appliance.
 Children, or persons with a disability which limits their ability to use the appliance, should have a responsible person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.
 During and after use of the appliance, certain parts will become very hot. Do not touch hot parts. Care should be taken to avoid touching heating elements inside the oven.
 Make sure that electrical cables connecting other appliances in the proximity of the oven cannot become entrapped in the oven door.
 WARNING: When correctly installed, your product meets all safety requirements laid down for this type of product category.
4

However special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
 Do not line the oven walls with aluminium foil. Do not place baking trays or the drip tray on the base of the oven chamber.
 Fire risk! Do not store flammable material in the ovens.  Always use oven gloves when removing the shelves and food
trays from the ovens whilst hot.
 Do not hang towels, dishcloths or other items on the appliance or its handles ­ as this could be a fire hazard.
 Clean the ovens regularly and do not allow fat or oils to build up in the oven base or tray. Remove spillages as soon as they occur.
 Do not stand on the open oven door/s.
 Always stand back from the appliance when opening the oven door/s to allow steam and hot air to escape before removing the food.
 Safe food handling: Leave food in the oven for as short a time as possible before and after cooking. This is to avoid contamination by organisms which may cause food poisoning. Take particular care during warmer weather.
 The manufacturer declines all liability for injury to persons or damage to property caused by incorrect or improper use of the appliance.
 WARNING: Taking care NOT to lift the oven by the door handle/s.
 IMPORTANT NOTE: This appliance shall not be used as a space heater, especially if installed in marine craft or caravans.
 Do not operate your appliance by means of an external timer or separate remote-control system.
 This appliance is for domestic use only.
5

INSTALLATION
CAUTION:  This appliance must be installed in accordance with these installation instructions.  This appliance shall only be serviced by authorised personnel.  This appliance is to be installed only by an authorised person in compliance
with the current electrical regulations and in observation of the instructions supplied by the manufacturer.  Failure to comply with this condition will render the guarantee invalid.  Incorrect installation, for which the manufacturer accepts no responsibility, may cause personal injury of damage.  Always disconnect the appliance from mains power supply before carrying out any maintenance operations or repairs.
FITTING REQUIREMENTS  The double oven can be fitted in standard units, 60 cm width and depth.  Installation requires a compartment as illustrated in figure 1.  The double oven can be built in the kitchen units, but you must ensure that it is pro-
perly ventilated.  On the lower side, the double oven must lay on supports standing the oven weight.  Remember the housing should not be free standing but be secured to the wall and/or
adjacent fittings.  We would point out that the adhesive which bonds the plastic laminate to the fur-
niture must withstand temperatures not less than 150° C to avoid delamination.  The walls of the units must be capable of resisting temperatures of 75 °C above
room temperature.  Do not seal the double oven into the cabinetry with silicone or glue; this makes
future servicing difficult. Delonghi will not cover the costs of removing the double oven, or of damage caused by this removal.  The walls surrounding the double oven must be made of heat-resistant material.  WARNING: Taking care NOT to lift the double oven by the door handle/s.
WARNING When correctly installed, your product meets all safety requirements laid down for this type of product category. However special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
IMPORTANT Some environmental factors and cooking habits can cause condensation in and around the oven/s during use. To protect surrounding cabinetry from possible damage caused by frequent or excessive condensation, we recommend moisture-proofing the oven cavities.
6

C B
A

Figure 1
I' I

E D

K L

J J'

16 - 20 mm

F G

L 2.5 mm

Product and Cabinet Dimensions (mm)

A overall height* of product

B overall width of product C overall depth of product (excluding handle and knobs) D height of chassis

E width of chassis

F depth of chassis

G

depth of oven frame and control panel (= distance between front of chassis and front of oven door, excl. knobs)

I minimum inside width of cavity I' overall width of cavity J inside height of cavity

J' overall height of cavity K minimum inside depth of cavity L flush fitting cabinetry clearance

* All height measurements include mounted feet.

1077 595 567 1057 556 545
22
560 600 1065 1082 550 22
7

FIXING THE DOUBLE OVEN Introduce the double oven into the furniture opening and fix it with 8 screws (not supplied) as figure 2. It is essential that the double oven rests on a surface which will support its weight, as the screw fixing is only complementary. Note It is essential that when installing your double oven adequate air circulation is allowed for within the installation. Inadequate air circulation may greatly impair the performance of your double oven and may effect adjacent cabinets due to an increase in temperature. Caution! Do not lift this double oven by the door handle/s. Adjust the hinges of furniture doors adjacent to the double oven to allow a 4-5 mm gap between the furniture door and the double oven frame.
Figure 2
8

Figure 3

AIAR iFrLOFWlow

OOVvEeNnDODOoR or LLOoWwEReTrRTIMrim

IMPORTANT: Please take extra care not to damage the lower trim of the double oven.
Ensure the double oven sits on wooden blocks or similar supports when it is removed from the carton as shown in above diagram. This will prevent any damage to the lower trim.
Should the lower trim become damaged, straighten the trim and ensure the double oven bottom door opens fully without obstruction from the lower trim.
After installation check the lower trim is still undamaged.
The space between the bottom of the bottom door & the lower trim is important to allow proper air circulation into the double oven.
The double oven bottom door should be opened slowly to it's fully open position ensuring there is adequate clearance between the bottom of the door and the lower trim.
The manufacturer does not accept responsibility for any damage to the oven resulting from incorrect installation.
9

ELECTRICAL REQUIREMENTS  The appliance must be connected to the mains checking that the voltage correspon-
ds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate.  A suitable isolating switch providing full disconnection from the mains power supply shall be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The isolating switch must be of an approved type and provide a 3 mm air gap contact separation in all poles (or in all active [phase] conductors if the local wiring rules allow for this variation of the requirements).  The isolating switch shall be easily accessible to the customer with the oven installed.  The power supply cable must not touch the hot parts and must be positioned so that it does not exceed 75°C above ambient.  To connect the appliance to the mains electricity supply, do not use adapters, reducers or branching devices as they can cause overheating and burning.  If the supply cord is damaged it must be replaced by the manufacturer or it's Service Agent or a similarly qualified person in order to avoid a hazard.
N.B. The connection of the appliance to earth is mandatory.
If the installation requires alterations to the domestic electrical system call a qualified electrician. He should also check that the domestic electrical system is suitable for the power drawn by the appliance.
Connecting / replacing the power cord must be done by a qualified electrician in accordance with the instructions supplied by the manufacturer and in compliance with established electrical regulations.
CONNECTING THE POWER SUPPLY CABLE
Important! This appliance must be connected to the electricity supply only by an authorised person. To connect the supply cable:  Unscrew the screw "A" securing the cover plate "B" behind the oven (fig. 4).  Remove the cover plate "B".  Remove the screws "C" from the cable clamp (fig. 5).  Insert the mains cable (type V105 - 3 x 2,5 mm2 section) into the cable protector "P".  Connect the phase, neutral and earth wires to the mains terminal connection block "D".  The wires of this appliance must be coloured in accordance with the following code:
 GREEN AND YELLOW - EARTH  BLUE - NEUTRAL - "N"  BROWN - LIVE - "L"
10

­­ The wire which is coloured GREEN AND YELLOW must be connected to terminal which is marked with the letter "E" or by the Earth symbol or coloured GREEN or GREEN AND YELLOW.
­­ The wire which is coloured BLUE must be connected to the terminal which is marked with the letter "N" or coloured BLACK.
­­ The wire which is coloured BROWN must be connected to the terminal which is marked with the letter "L" or coloured RED.
 Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws "C".
 Refit the cover plate "B" and fix it with the screw "A".
N.B. The earth conductor must be left about 3 cm longer than the others.

VOLTAGE AND POWER CONSUMPTION

220-240 V ac

4770 W (20.73 A)

FEEDER CABLE SECTION This double oven must be connected to electrical supply using V105 insulated cable.
3 x 2.5 mm2 (*) (*) Connection with wall box connection.

Figure 4 B
A

Figure 5

L1L1((LLNN22)) EPE

LN

Brown (Live)

D

Blue (Neutral)

P C

Green & Yellow (Earth)

11

WIRING DIAGRAM
Figure 6
12

TM1
LF LF1

F1

1a

1

2a

2

3a

3

4a

4

5a

5

6a

6

7a

7

8a

8

9a

9

10a 10

11a 11

S1

C1

CIR1

G1 V1
S1

1 1a
PR TL
TL TL TL
CF T ML N

N/7 L/8

TM2
LF2 LF3

F2

1a

1

2a

2

3a

3

4a

4

5a

5

6a

6

7a

7

8a

8

9a

9

10a 10

11a 11

S2

C2

CIR2

G2 V2
S2

ELECTRIC DIAGRAM KEY

CF

Cooling fan motor

TL

Thermal overload

M

Terminal block

T

Earth connection

MAIN OVEN

F1

Oven switch

TM1 Oven thermostat

LF/LF1 Oven lamps

S1

Thermostat pilot lamp

PR

Oven programmer

V1

Oven fan motor

C1

Oven top element

G1

Oven grill element

S1

Oven bottom element

CIR1 Oven circular element

BOTTOM OVEN

F2

Oven switch

TM2 Oven thermostat

LF2/LF3 Oven lamps

S2

Thermostat pilot lamp

V2

Oven fan motor

C2

Oven top element

G2

Oven grill element

S2

Oven bottom element

CIR2 Oven circular element

13

USE AND CARE
CAUTION:  This appliance must be used only for the task it has explicitly been designed for, that
is for domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous.
 Do NOT place combustible materials or products on this appliance at any time.

USING THE OVENS FOR THE FIRST TIME
Operate as follows:
 Assemble the wire racks on the oven walls using the 2 screws interposing the catalytic panels "A" with the arrow up (fig. 7a). The catalytic panel with the hole for the side oven lamp must be positioned on the left oven wall. DO NOT INTERPOSE THE CATALYTIC PANEL WITHOUT THE HOLE ON THE LEFT OVEN WALL.
 Slide in the grease filter on the back of the ovens as in fig. 8.
 Slide into the guides, the shelf and the tray (fig. 7b).
 The rack must be fitted so that the safety notch, which stops it sliding out, faces the inside of the oven; the guard rail shall be at the back.
 The tray must be fitted so that the safety notch, which stops it sliding out, faces the inside of the oven.
 To eliminate traces of grease in manufacture it is necessary to preheat the ovens at the maximum temperature:
· For 60 minutes in the position, for 30 minutes in the position and for another 15 minutes in the position.
 Unscrew the fixing screws and slide off the wire racks and the catalytic liners to the oven wall as in fig. 7a.
 The grill is secured to the rear wall of the oven on a hinge system that allows it to be lowered to allow proper access when cleaning the oven ceiling (see next chapter TILTING GRILL).
 Let the oven cool down, switch off the electrical supply, then clean the inside of the oven with a cloth soaked in water and neutral detergent and dry thoroughly.
14

Figure 7a Guard rail

A

A

Figure 7b Stop notch

Stop notch

GREASE FILTER
 A special screen is provided at the back of the ovens to catch grease particles, mainly when meat is being roasted (fig. 8).
 Clean the filters after any cooking!  The grease filters can be removed for
cleaning and should be washed regularly in hot soapy water (fig. 8).
 Always dry the filters properly before fitting it back into the ovens.
CAUTION: When baking pastry etc. this filter should be removed.

Figure 8

TILTING GRILL  The grill is secured to the rear wall of the ovens on a hinge system that allows it to be
lowered to allow proper access when cleaning the oven ceiling (fig. 10).  To lower the grill element: use a flat-head screwdriver or a small coin to loosen the
element fixing screw (fig. 9).  When you have finished cleaning the oven ceiling, raise the grill element and screw
the element fixing screws back onto the studs. Make sure that the fixing screws are tightened and the element is held securely in place.  The grill element itself is self-cleaning.
Fixing screw
Stud

Figure 9

Figure 10
15

Figure 11

CONTROL PANEL

7

6

Mode

1

2

3

4

5

Controls description 1. Oven temperature control knob (Top main oven) 2. Function selector control knob (Top main oven) 3. Digital electronic programmer (Top main oven only) 4. Function selector control knob (Bottom oven) 5. Oven temperature control knob (Bottom oven)
Pilot lamps 6. Bottom oven temperature indicator light 7. Top main oven temperature indicator light

Please note: Your appliance has been fitted with a cooling fan to achieve optimum efficiency of the controls and to ensure lower surface temperatures are maintained. The cooling fan motor switches ON/OFF depending on temperature. Depending on cooking temperatures and times, the cooling fan may run on even after the appliance oven has been switched off. The duration of this time is dependent on previous cooking temperature and duration.
16

USING THE PRESS-AND-TURN CONTROL KNOBS The control knobs are flush-mounted in the control panel. Use them as follows: a. Press lightly on the knob (figure 12 A); b. The knob will extend outwards as illustrated in figure 12 B. c. Turn the knob to the required position (figure 12 C). d. When you have finished cooking, turn the knob back to the "0" (off) position and press
it (figure 12 D) so that it stays flush with the control panel again (figure 12 F).
IMPORTANT: Never press down the knob when it is not in the "0" (off) position (figure 12 E).

Figure 12

Fig. A

Fig. B

Fig. C

Fig. D

Fig. E

Fig. F
17

COOKING WITH MULTIFUNCTION OVENS

Attention: The oven door becomes very hot during operation. Keep children away.

GENERAL FEATURES

As its name indicates, this is an oven that presents particular features from an operational point of view. In fact, it is possible to insert 7 different programs to satisfy every cooking need. The 7 positions, thermostatically controlled, are obtained by 4 heating elements which are:

 Bottom element 1300 W (@230V)

 Top element

1000 W (@230V)

 Grill element

2000 W (@230V)

 Circular element 2200 W (@230V)

WARNING: The door is hot, use the handle.
During use the appliance becomes hot. Care should be taken to avoid touching heating elements inside the oven.
18

OPERATING PRINCIPLES Heating and cooking in the MULTIFUNCTION oven are obtained in the following ways:
a. by normal convection  The heat is produced by the upper and
lower heating elements.
b. by forced convection  A fan sucks in the air contained in the
oven muffle, which sends it through the circular heating element and then sends it back through the muffle.  Before the hot air is sucked back again by the fan to repeat the described cycle, it envelops the food in the oven, provoking a complete and rapid cooking. It is possible to cook several dishes simultaneously.
c. by semi-forced convection  The heat produced by the upper and
lower heating elements is distributed throughout the oven by the fan.
d. by radiation  The heat is irradiated by the infra red
grill element.
e. by radiation and ventilation  The irradiated heat from the infra red
grill element is distributed throughout the oven by the fan.
f. by ventilation  The food is defrosted by using the fan
only function without heat.

Figure 13

Figure 14

THERMOSTAT KNOB
To turn on the heating elements of the oven, set function selector knob to the required position and the thermostat knob to the desired temperature. To set the temperature, turn the thermostat control knob indicator mark to the required temperature. The elements will turn on or off automatically which is determined by the thermostat. The operation of the heating elements is signalled by a light placed close to the knob.

FUNCTION SELECTOR KNOB Rotate the knob clockwise to set the oven for one of the following functions.

OVEN LIGHT
By turning the knob onto this setting we light the oven cavity. The oven remains alight while any of the functions is on.
TRADITIONAL CONVECTION COOKING
The upper and lower heating elements are switched on. The heat is diffused by natural convection and the temperature must be regulated between 50°C and the maximum position with the thermostat knob. It is necessary to preheat the oven before introducing the foods to be cooked. Recommended for: For foods which require the same cooking temperature both internally and externally, i. e. roasts, spare ribs, meringue, etc.
19

GRILLING The infra-red heating element is switched on. The heat is diffused by radiation. Use with the oven door closed and the thermostat knob must be regulated between 50°C and 225°C maximum. For correct use see chapter "USE OF THE GRILL". Always grill with the oven door closed. Recommended for: Intense grilling, browning, cooking au gratin and toasting etc.
DEFROSTING FROZEN FOODS
Only the oven fan is on. To be used with the thermostat knob on "0" because the other positions have no effect. The defrosting is done by simple ventilation without heat. Recommended for: To rapidly defrost frozen foods; 1 kilogram requires about one hour. The defrosting times vary according to the quantity and type of foods to be defrosted.
HOT AIR COOKING
The circular element and the fan are on. The heat is diffused by forced convection and the temperature must be regulated between 50°C and the maximum position with the thermostat knob. It is not necessary to preheat the oven. Recommended for: For foods that must be well done on the outside and tender or rare on the inside, i.e. lasagna, lamb, roast beef, whole fish, etc.
VENTILATED GRILL COOKING
The infra-red grill and the fan are on. The heat is mainly diffused by radiation and the fan then distributes it throughout the oven. Use with the oven door closed and the thermostat knob must be regulated between 50°C and 220°C maximum. It is necessary to preheat the oven for about 5 minutes. For correct use see chapter "GRILLING AND COOKING AU GRATIN". Always grill with the oven door closed. Recommended for: For grill cooking when a fast outside browning is necessary to keep the juices in, i. e. veal steak, steak, hamburger, etc.
20

MAINTAINING TEMPERATURE AFTER COOKING OR SLOWLY HEATING FOODS
The upper element and the circular element connected in series, are switched on; also the fan is on. The heat is diffused by forced convection with the most heat being produced by the upper element. The temperature must be regulated between 50°C and 140°C with the thermostat knob.
Recommended for: To keep foods hot after cooking. To slowly heat already cooked foods.
CONVECTION COOKING WITH VENTILATION
The upper and lower heating elements and the fan turn on. The heat coming from the top and bottom is diffused by forced convection. The temperature must be regulated between 50°C and the maximum position with the thermostat knob.
Recommended for: For foods of large volume and quantity which require the same internal and external degree of cooking; for ie: rolled roasts, turkey, legs, cakes, etc.
COOKING ADVICE
The external parts of the appliance become hot during operation. Keep children well out of reach.
OVEN COOKING Before introducing the food, preheat the oven to the desired temperature. For a correct preheating operation, it is advisable to remove the tray from the oven and introduce it together with the food, when the oven has reached the desired temperature. Check the cooking time and turn off the oven 5 minutes before the theoretical time to recuperate the stored heat.
STERILIZATION Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the following way:
a. Set the switch to position . b. Set the thermostat knob to position 185°C and preheat the oven. c. Fill the dripping pan with hot water. d. Set the jars onto the dripping pan making sure they do not touch each other and the
door and set the thermostat knob to position 135°C. When sterilization has begun, that is, when the contents of the jars start to bubble, turn off the oven and let cool.
REGENERATION Set the switch to position and the thermostat knob to position 150°C. Bread becomes fragrant again if wet with a few drops of water and put into the oven for about 10 minutes at the highest temperature.
21

SIMULTANEOUS COOKING OF DIFFERENT FOODS The MULTIFUNCTION oven set on position or gives simultaneous heterogeneous cooking of different foods. Different foods such as fish, cake and meat can be cooked together without mixing the smells and flavours. This is possible since the fats and vapors are oxidized while passing through the electrical element and therefore are not deposited onto the foods. The only precautions to follow are:  The cooking temperatures of the different foods must be as close to as possible, with
a maximum difference of 20- 25°C.  The introduction of the different dishes in the oven must be done at different times in
relation to the cooking times of each one. The time and energy saved with this type of cooking is obvious.
ROASTING To obtain classical roasting, it is necessary to remember:  that it is advisable to maintain a temperature between 180 and 200°C.  that the cooking time depends on the quantity and the type of foods.
USE OF THE GRILL Preheat the oven for about 5 minutes. Introduce the food to be cooked, positioning the rack as close to the grill as possible. The dripping pan should be placed under the rack to catch the cooking juices and fats. Grilling with the oven door closed. Do not grill for longer than 30 minutes at any one time. ATTENTION: the oven door becomes very hot during operation. Keep children away.
GRILLING AND COOKING "AU GRATIN" Grilling may be done using the grill+fan setting , in this setting the hot air completely surrounds the food that is to be cooked, to give a more even and rapid cooking process. Set the temperature knob between 50°C and 220°C maximum, preheat the oven, then simply place the food on the grid. Close the door until grilling is complete. Adding a few dabs of butter before the end of the cooking time gives the golden "au gratin" effect. Grilling with the oven door closed. Do not grill for longer than 30 minutes at any one time. ATTENTION: the oven door becomes very hot during operation. Keep children away.
22

RECOMMENDED COOKING TEMPERATURE

Food

°C

°F

Gas Shelf Mark Position*

Cooking Time (approx)

CAKES

Victoria sandwich

190

Small cakes/buns

190

Maidera cake

180

Fruit cake

170

Rich fruit cake

150

Scones

225

375

5

2 or 3

375

5 1 and 2

350

4

2 or 3

325

3

3

300

2

3 or 4

425

8 - 9

2

20-25 mins 15-20 mins
20 mins 13/4 hours 21/2 hours 8-10 mins

PASTRY Puff Short crust Plate tarts Quiches and flans

225 200 200 - 210 200 - 210

425 400 400 - 410 400 - 410

8 - 9 6 6 6

2 2 1 or 2 1 or 2

10-20 mins 20-30 mins 30-35 mins 40-45 mins

YEAST Bread loaf Bread rolls Pizza dough

225

425

7 - 8

2

220

425

7

1 or 2

230

450

8

2

35-55 mins 15-20 mins
20 mins

ROAST MEAT Beef ­ Medium Lamb Pork Veal Chicken Turkey up to 10lb Stews/casseroles

190 190 190 - 200 190 190 180 150 - 170

375 375 375 - 400 375 375 350 300 - 325

5 5 5 - 7 5 5 4 2 - 3

2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3 2 or 3

20 mins/lb + 20 mins 25-30 mins/b + 25 mins 30 mins/lb + 30 mins
30 mins/b + 30 mins 30 mins/b + 30 mins 18-20 mins/b + 20 mins
11/2 2 hours

N.B. For fan ovens reduce the temperature by 10-20°C. For any dish taking one hour or over to cook, reduce the cooking time by 10 minutes per hour.

* Shelf positions have been counted from the top of the oven to the base. A fan oven creates more even temperature throughout, therefore the shelf positions are not as critical.

23

ELECTRONIC PROGRAMMER (Top main oven only)
CLOCK and TIMER with " TOUCH CONTROL" KEYS

Keys: and
Mode

Description:
Touched simultaneously (for more than 2 seconds):
 setting the clock;
 setting the timer volume (by touching once, along with the "Mode" key);
 to cancel automatic cooking at any time.
Function selection (touched for more than 2 seconds):
 setting the clock (only after first connection or after a power failure);
 timer;
 automatic cooking "dur" (duration) - how long the food will take to cook (by touching the "Mode" key again);
 automatic cooking "End" - the time you would like the oven turns off (by touching the "Mode" key two more times).
Increases the number shown on the display.
Decreases the number shown on the display.

24

Figure 15

Illuminated symbols:

Description:

AUTO

flashing

Automatic cooking completed, oven in automatic position but not set.

AUTO

steady illumination

Oven set for automatic cooking, cooking still not taking place.

flashing Timer being set.

steady illumination
steady illumination

Timer in operation.
Oven set for manual cooking.

and AUTO
and AUTO

AUTO flashing
steady illumination

Automatic cooking being set.
Oven set for automatic cooking, cooking taking place.

"TOUCH-CONTROL" KEYS

The "touch-control" keys shall be operated by the fingers (just by touching the key). When using touch controls it is best to use the ball of your finger rather than the tip. The keys are automatically deactivated:

 8 seconds after the last selection; the deactivation is indicated by an acoustic signal ("beep").

To reactivate just touch the "Mode" key or the " more than 2 seconds.

" and "

" keys (simultaneously) for

SETTING THE CLOCK
When first connected, or after a power failure, the digits and "AUTO" will shown on the display. To set the clock, touch the "Mode" key, for more than 2 seconds, and then the " " or "
" keys. Important: the oven does not operate, in manual cooking, without first having set the clock.

To set the clock, with the appliance already connected, touch the " " and " simultaneously (for more than 2 seconds), then " " or " " keys. Important:

" keys

 changing the time will delete any automatic program;

 after setting the clock, the oven starts to operate in the selected function (manual co-

oking). The " " symbol is steady illuminated.

USING THE TIMER
You can use the timer at any time, even when the oven is not in use. The timer does not turn the oven off. The timer can be set for up to 23 hours and 59 minutes.

 To set the timer, touch the "Mode" key for more than 2 seconds (the " flashes), than the " " or " " keys.

" symbol

 After about 8 seconds an acoustic signal ("beep") will sound confirming the regulation (" " symbol steady illuminated).

 To check the remaining time touch the "Mode" key for more than 2 seconds. If the remaining time is more than a minute the display will show hours and minutes; if less than a minute the display will show seconds.

 When the time is up, the timer will beep. Touch the "Mode" key , for more then 2 seconds, to turn it off; or press the " " or " " key to stop the beep and than the "Mode" key, for more than 2 seconds, to deactivate the " " symbol flashing on the display.

 Turn off the oven manually (function and thermostat knobs in the off position) if the manual cooking has been completed.

25

SETTING THE TIMER VOLUME You can select from three volume levels.
 Touch the " " and " " keys simultaneously for more than 2 seconds.  Touch the "Mode" key; you can read on the display the current timer volume ("ton1",
"ton2" or "ton3").
 Touch the " " key to listen or change the timer volume.  Timer volume activated: the last displayed.  After about 8 seconds an acoustic signal ("beep") will sound confirming the volume
setting; then the time of day will be displayed.
AUTOMATIC COOKING Use automatic cooking to automatically turn the oven on, cook, and then turn the oven off. 1. Check the clock shows the correct time. 2. Select the function and temperature (function and temperature knobs). The oven will
come on. 3. Decide how long the food will take to cook, allowing time for preheating if necessary. 4. Touch the "Mode" key for more than 2 seconds and then touch again. "dur" will show
(duration). Using the " " and " " keys, set the cooking time. 5. Decide the time you would like the oven to turn off; touch the "Mode" key for more than
2 seconds and then touch it two times again. "End" will show. Using the " " and " " keys, set the cooking time.
 Note: while "dur" is displayed you can change to "End" just by touching one time the "Mode" key (within 8 seconds from the last selection).
If there is time to wait before cooking starts, the current time of day and "AUTO" will show in the clock display. The oven will switch off but is now set for automatic cooking.
If you are already at home to turn the oven on and only want the oven to turn off automatically, start cooking as normal, then follow step 4 or step 5 to set a time to stop the oven.
When automatic cooking starts, " " will be displayed and the oven will turn on.  To see the remaining cook time, follow step 4 up to display "dur" (duration).  To see the set stop time, follow step 5 up to display "End".
 To cancel automatic cooking at any time, touch the " " and " " keys simultaneously (for more than 2 seconds) and turn the temperature and function knobs to the off position.
When the stop time is reached, the oven will turn off, the timer will beep and "AUTO" will flash:  Touch any key to stop the beeping.  Touch the "Mode" key, for more than 2 seconds, to return the oven to the manual mode
(" " symbol steady illuminated on the display).  Turn the temperature and function knobs to the off position.
Attention: After a power failure any automatic program is deleted. Turn off the oven manually.
26

CLEANING AND MAINTENANCE
GENERAL ADVICE  Before you begin cleaning, you must ensure that the appliance is switched off
and disconnected from the electrical power supply.  It is advisable to clean when the appliance is cold and especially when cleaning the
enamelled parts.  Avoid leaving alkaline or acidic substances (lemon juice, vinegar, etc.) on the surfaces.  Avoid using cleaning products with a chlorine or acidic base.  Do not use a steam cleaner because the moisture can get into the appliance thus
make it unsafe.  Important: The use of suitable protective clothing/gloves is recommended when
handling or cleaning of this appliance.  Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass since they can scratch the surface, which may result in shattering of the glass.
WARNING! When correctly installed, your product meets all safety requirements laid down for this type of product category. However special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
ENAMELLED PARTS All the enamelled parts must be cleaned with a sponge and soapy water or other nonabrasive products. Dry preferably with a microfibre or soft cloth. Acidic substances like lemon juice, tomato sauce, vinegar etc. can damage the enamel if left too long.
STAINLESS STEEL, ALUMINIUM PARTS, PAINTED AND SILK-SCREEN PRINTED SURFACES Clean using an appropriate product. Always dry thoroughly. IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abrasion. You are advised to use a soft cloth and neutral soap. CAUTION: Do not use abrasive substances or non-neutral detergents as these will irreparably damage the surface.
GLASS CONTROL PANEL Clean using an appropriate product. Always dry thoroughly. Do not use harsh abrasive cleaners or sharp metal scrapers to clean the control panel since they can scratch the surface, which may result in shattering of the glass.
27

INSIDE OF OVENS The oven should always be cleaned after use when it has cooled down. The cavity should be cleaned using a mild detergent solution and warm water. Suitable proprietary chemical cleaners may be used after first consulting with the manufacturers recommendations and testing a small sample of the oven cavity. Abrasive cleaning agents or scouring pads/cloths should not be used on the cavity surface. NOTE: The manufacturers of this appliance will accept no responsibility for damage caused by chemical or abrasive cleaning.
Do not store flammable material in the oven. Let the oven cool down and pay special attention no to touch the hot heating elements inside the oven cavity.
ADVICE FOR USE AND MAINTENANCE OF CATALYTIC PANELS The catalytic panels are covered with special microporous enamel which absorbs and does away with oil and fat splashes during normal baking over 200°C. If, after cooking very fatty foods, the panels remain dirty, operate the oven "idling" on max temperature for about 30 minutes. These panels do not require to be cleaned, however it is advised to periodically remove them from the oven (at least the side panels) and to wash them with tepid soapy water and then wipe off with a soft cloth. DO NOT CLEAN OR WASH THEM WITH ABRASIVE PRODUCTS OR WITH PRODUCTS CONTAINING ACIDS OR ALKALIS. The side panels are reversible and when the catalytic microporous enamel degrades, they can be turned to the other side.
GRILL HEATING ELEMENT  The heating element is self-cleaning and does not require maintenance. The grill is
secured to the rear wall of the oven on a hinge system that allows it to be lowered to allow proper access when cleaning the oven ceiling (figs. 9, 10 at page 15).
GREASE FILTER  Clean the filter after any cooking! The grease filter can be removed for cleaning and
should be washed regularly in hot soapy water (fig. 8 at page 15).  Always dry the filter properly before fitting it back into the oven.
28

REPLACING THE OVEN LIGHTS
WARNING: Ensure the appliance is switched off before replacing the lamp/s to avoid the possibility of electric shock.
 Let the oven cavity and the heating elements to cool down.  Switch off the electrical supply.

LEFT LAMP  Remove the left wire rack and the side catalytic panel by unscrewing the fixing screws
(see chapter "USE AND CARE" at page 14).  Press down from the top the protective cover "A" (fig. 16) and remove it by rotating on
the lower side.  IMPORTANT: Never use screwdrivers or other utensils to remove the cover "A".  This could damage the enamel of the oven or the lampholder. Operate only by hands.
 Replace the halogen lamp "B" with a new one suitable for high temperatures having the following specifications: 220-240V or 230-240V, 50 Hz and same power (check
watt power as stamped in the bulb itself) of the replaced lamp.
 IMPORTANT WARNING: Never replace the lamp with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.
 Refit the protective cover "A" operating in reverse order.  ATTENTION: The notch in the inner edge of the cover must be oriented toward the
lamp. Assemble the side catalytic panel and the left wire rack.

TOP RIGHT LAMP:  Remove the protective cover "C" (fig. 16).  Replace the halogen lamp "B" with a new one suitable
for high temperatures having the following specifications: 220-240V or 230-240V, 50 Hz and same power (check watt power as stamped in the bulb itself) of the replaced lamp.  IMPORTANT WARNING: Never replace the lamp with bare hands; contamination from your fingers can cause premature failure. Always use a clean cloth or gloves.  Refit the protective cover "C".
NOTE: Oven bulb replacement is not covered by your guarantee.

WRONG

CORRECT

1
A

2A

BA

BC

Figure 16
29

REMOVING AND REPLACING THE INNER DOOR GLASS PANES FOR CLEANING If you wish to clean the inner panes of glass of the doors, make sure you follow the precautions and instructions very carefully. Replacing the glass panes and the doors incorrectly may result in damage to the appliance and may void your warranty. IMPORTANT!  Take care, the oven doors are heavy. If you have any doubts, do not attempt to remove
the doors.  Make sure the double oven and all its parts have cooled down. Do not attempt to
handle the parts of a hot oven.  Take extreme care when handling the glass panes. Avoid the edges of the glass bum-
ping against any surface. This may result in the glass shattering.  CAUTION:  Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door
panes of glass since they can scratch the surface, which may result in shattering of the glass.  If you notice any sign of damage on any of the glass panes (such as chipping, or cracks), do not use the oven. Call your Authorised Service Centre or Customer Care.  Make sure you replace the glass panes correctly. Do not use the oven without glass panes correctly in place.  If the glass panes feel difficult to remove or replace, do not force them. Call your Authorised Repairer or Customer Care for help.  Note: service visits providing assistance with using or maintaining the double oven are not covered by your warranty.
30

REMOVING THE OVEN DOORS

The oven doors can easily be removed as follows:

 Open the door to the full extent (fig. 18).

 Open the lever "A" completely on the left and right hinges (fig. 19).

 Hold the door as shown in fig. 17.

 Gently close the door until left and right hinge levers "A" are hooked to part "B" of the door (figs. 19, 20).

Figure 18

 Withdraw the hinge hooks from their

A

location following arrow "C" (fig. 21).

 Rest the door on a soft surface.

 To replace the door, repeat the above

steps in reverse order.

B

Figure 19

Figure 20

C

Figure 17

Figure 21

31

Figure 22
A B
Figure 23
Figure 24 TOP OVEN DOOR ONLY G

CLEANING THE INNER PANES OF GLASS The oven doors are fitted with no. 3 panes:
 no. 1 outside;  no. 1 inner;  no. 1 in the middle.
To clean all panes on both sides it is necessary to remove the inner and the middle panes as follows.
REMOVING THE MIDDLE AND INNER PANES OF GLASS 1. Lock the door open:
 Fully open the oven door (fig. 22).
 Fully open the lever "A" on the left and right hinges (fig. 23).
 Gently close the door until left and right hinge levers "A" are hooked to part "B" of the door (figs. 23, 24).
2. Remove the inner pane:
 Top oven door only: remove the seal "G" by unhooking the no. 3 fixing hooks (fig. 25).
 Gently pull out the inner pane of glass (Fig. 26).
 Clean the glass with an appropriate cleaner. Dry thoroughly, and place on a soft surface.

Figure 25
32

Figure 26

Figure 27

3. Remove the middle pane:
 Gently unlock the middle pane of glass from the bottom clamps by moving it as in fig. 28.
 Gently lift the bottom edge of the pane (arrow 1 in fig. 29) and remove it by pulling it out from the top clamps (arrow 2 in fig. 29).
 Clean the glass with an appropriate cleaner. Dry thoroughly, and place on a soft surface.
Now you can also clean the inside of the outer glass.

Figure 28
1 2
Figure 29
33

MM Figure 30

1

2

1
Figure 31

REPLACING THE MIDDLE AND INNER PANES OF GLASS
1. Make sure the door is locked open (see fig. 24).
2. Replace the middle pane:
 Check that the four rubber pads are in place ("M" in fig. 30).
 Check that you are holding the pane the correct way. You should be able to read the wording on it as it faces you.
 Gently insert the top edge of the pane into the top clamps (arrow 1 in fig. 31), then lower the pane and insert the bottom edge into the bottom clamps (arrow 2 in fig. 31) and then slide the pane into position (fig. 32).

Figure 32
34

Figure 33
E E
Figure 34 Figure 35

D FF

3. Replace the inner pane:
 Check that the four rubber pads are in place ("D" in Fig. 33).
 Check that you are holding the pane the correct way. You should be able to read the wording on it as it faces you.
 Insert the pane in the left "E" and right "F" slide guides (fig. 34), and gently slide it to the retainers "H" (fig. 35).
 Top oven door only: Reassemble the seal "G" in the correct way by hooking the no. 3 fixing hooks in the proper holes (fig. 36).
4. Unlock the oven door by opening it completely and closing the lever "A" on the left and right hinges (Fig. 37).
A

H

TOP

OVEN

DOOR

G

ONLY

Figure 37
The top oven door has a sealed gasket in the top part.
It is normal the opened gap between the top edge of the inner glass and the sealed gasket. This allows the cooling air circulation.

Figure 36

The bottom oven door has not a sealed gasket in the top part.
35

SERVICE AND MAINTENANCE
SERVICING THE APPLIANCE Service may be obtained by contacting our Customer Service Centre to locate the nearest Authorised Delonghi Service Agent: Servicing shall be carried out only by authorized personnel. The appliance shall not be modified.
TROUBLESHOOTING If you experience a problem with your double oven, check the following points before calling our Customer Service Centre for assistance. 1. The power is switched on. 2. The controls are switched on. 3. Top oven only: none semi-automatic or automatic cooking program has been selected. 4. Both the fuse and the mains fuse are intact. Should you still require assistance please contact our Customer Service Centre for your nearest Authorised Delonghi Service Agent. 36

37

38

39

Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the right, considering the characteristics of the models described here, at any time and without notice, to make eventual necessary modifications for their construction or for commercial needs.
w w w. d e l o n g h i . c o m . a u w w w. d e l o n g h i . c o . n z
Cod. 1104182 - ß1


Adobe InDesign CS5.5 (7.5.2) Adobe PDF Library 9.9

Search Any Device: