zmp
RF Exposure Info
Shenzhen Innosystem Technology Co., Ltd MZ628 2AT7C-MZ628 2AT7CMZ628 mz628
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 1 Pages, 127.18KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7633104FCC ID:2AT7C-MZ628 RF Exposure Evaluation According to KDB 447498 and part 2.1093Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. For 100 MHz to 6 GHz and test separation distances 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [f(GHz)] 3.0 for 1-g SAR, and 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison Here, For BLE Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit 0.7 1.259 2402 5 0.364 3.0 So a SAR test is not requiredWPS 文字