( - HKA00605010-2E-\216d\227l\217\221)
TABLE OF CONTENTS/目录清单
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 11 Pages, 463.09KB
Document DEVICE REPORT0000000040SHENZHEN HUNTKEY ELECTRIC CO., LTD Specification For 5 Watts/ Switching Mode Power Supply Product No./: Model No./:HKA00605010-2E Customer/: File No./: Revision/: 1 Date/: 2010-10-11 TABLE OF CONTENTS/ 1. Table of Contents/ ............................. 2. Approval Sheet Cover/ .............. 3. E.C. List/ ....................................... 4. Electrical Specification/ ..................... 5. Environment Requirements/ ............... 6. Reliability Requirements/ ................. 7. EMI/EMS Standards/ ................. 8. Safety Standards/ .............................. 9. Mach. Outline Drawing/ .......................... 10. Label Drawing/ ......................................... 11. Package Drawing/ ........................... 12. Samples Test Report/ .................... 13. DC/AC Cord Drawing/DC/AC ................. 14. Circuit Schematic Drawing/ ................... 15. Other Mach. Drawing/ .................. 16. Bill Of Material (BOM)/ ................. Prepared By : Checked By : Approved By : Page 0 SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ ZOOM CUSTOMER P.N./ MODEL NO./ HKA00605010-2E APPROVAL NO./ WI-F-20101015 PREPARED DATE/ 2010-10-11 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature./ /. ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen, Guangdong, P. R. China TEL: 0755-89606666 P.C.: 518129 FAX: 0755-89606333 http://www.huntkey.com Page 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ 1 Original Release --- Changed Date/ ECN No. 2010-10-11 --- Page 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD Contents/ 1. SCOPE/.....................................................................................................................................4 2. Input Characteristics/ ........................................................................................................ 4 3. Output Characteristics/ ..................................................................................................... 4 4. Protection Requirements/ ................................................................................................. 5 5. Environment Requirements/ ............................................................................................. 6 6. Reliability Requirements/ ............................................................................................. 6 7. EMI/EMS Standards/EMI/EMS ..............................................................................................7 8. Safety Standards/ .............................................................................................................. 7 9. Mach. Outline Drawing/ ....................................................................................................... 8 10. Label Drawing/ ..................................................................................................................... 9 11. Package Drawing/ ....................................................................................................... 10 Page 3 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1. SCOPE/ The document details the electrical, mechanical and environmental specifications of a SMPS, the power supply provides 5 W continuous output power. 5 W(),. The power supply shall meet the RoHS requirements. RoHS . Description/ SMPS Adaptor(Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 2. Input Characteristics/ 2.1. Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac with a single phase. 90Vac 264Vac, . Minimum/ Rating/ Maximum/ Input Voltage/ 90Vac60HZ 100Vac~240Vac 264Vac Input Frequency/ 47Hz 60Hz/50Hz 63Hz 2.2. Input AC Current/ 0.25Amax. @ 90Vac input & Full load/ 90Vac 0.25A 2.3. Inrush Current (cold start)/() 30Amax. @ 132Vac input/ 132Vac 30A 40Amax. @ 264Vac input/ 264Vac 40A 2.4. Average Efficiency / While input 115Vac and 230Vac,the average efficiency is more than 68.3%.The test point is at 25%,50%,75% and 100% of max load respectively. 115Vac 230Vac 68.3% 25%,50%,75% 100% 2.5. No-Load Input Power Dissipation/ While input 115Vac or 230Vac and the output is no load, the input power loss must be less than 0.30W. 115Vac/230Vac 0.30W. 3. Output Characteristics/ 3.1. Static Output Characteristics <Vo & R+N>/<&+> Output Rated Load/ Peak Output Range R+N Remark Rating Min. Load Max. Load Load +5.0V 0A 1.0A / 4.75V ~ 5.25V 120mVp-p Page 4 SHENZHEN HUNTKEY ELECTRIC CO., LTD Ripple & Noise: Tested by a oscilloscope using 20MHz bandwidth and the output is paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. (Under the input Voltage 100~240Vac) : 20MHz , 0.1uF 10uF ( 100~240Vac) 3.2. Line/ Load Regulation// Output Rating Load Condition/ Line Regulation Load Regulation Remark Min. Load Max. Load +5.0V 0A 1.0A ± 2% ± 5% 3.3. Turn - on Delay Time/ 2S max. @ 90Vac input & Full load/ 90Vac 2S 3.4. Hold-up Time/ 10mS min. @ Full load &115Vac/60Hz input turn off at worst case 115Vac , 10mS 10mS min. @ Full load &230Vac/50Hz input turn off at worst case 230Vac , 10mS 3.5. Rise Time/ 30mS max. @ Full load/ 30mS 3.6. Fall Time/ 20mS max. @ Full load/ 20mS 3.7. Output Overshoot / Undershoot// 10% max. When the power on or off/ 10% 3.8. Output Load Transient Response/ Output voltage is within 4.5~5.5V while the load step is from 20% to 80% of max load, R/S: 0.5A/uS, frequency: 100Hz, and 8mS duration at 80% of max load. 4.5~5.5V ,: 20% 80%,: 0.5A/uS,: 100Hz, 80% 8mS. 4. Protection Requirements/ 4.1. Over Current Protection/ OCP Point Range: <200% of Max. Load/: 200% The output shall hiccup when the over current applied to the output, and shall be self-recovery when the fault condition is removed ,,, 4.2. Short Circuit Protection/ The input power shall decrease when the output is short to GND, the power supply shall not damage, and shall be self-recovery when the fault condition is removed ,,, 4.3. Over Voltage Protection/ The power supply shall be protected when the output is over voltage, and the power Page 5 SHENZHEN HUNTKEY ELECTRIC CO., LTD supply shall not be damaged. , 5. Environment Requirements/ 5.1. Operating Temperature and Relative Humidity/ 0 to +40 10%RH to 90%RH 5.2. Storage Temperature and Relative Humidity/ -40 to +70 5%RH to 95%RH non-condensing @ Sea level shall below 10,000 feet 10,000 -40 +70 , 10%RH to 90%RH 5.3. Vibration/ 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z : 10 to 300Hz, : 1.0G(: 3.5mm), X, Y, Z 1 5.4. Drop in/ 1 Corner, 3 Edges, 6 Surfaces each once. Drop on the cement plane, Height: 100cm, 1 , 3 , 6 1 : 100 6. Reliability Requirements/ 6.1. MTBF Qualification/ 6.2.1 The MTBF Prediction shall be at least 300,000hours at 40, Full load and normal input conditionStandardsTelecordia SR-332, Issue 2 300,000 ,40Telecordia SR-332, Issue 2 6.2.2 The MTBF Demonstration shall be at least 30,000hours at 40, Full load and normal input conditionStandardsMIL-STD-781C 30,000 ,40 MIL-STD-781C Page 6 SHENZHEN HUNTKEY ELECTRIC CO., LTD 7. EMI/EMS Standards/EMI/EMS 7.1. EMI Standards/EMI EN 55022:1998, +A1:2000 +A2:2003, Class B CISPR 22:2003, Class B AS/NZS CISPR 22: 2004, Class B 7.2. EMS Standards/EMS EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EN 61000-4-2 Electrostatic Discharge(ESD): 8kV air discharge, 6kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-4 Electrical Fast Transient/Burst-EFT EN 61000-4-5 Surge Immunity Test: AC Power Line: line to line 2.5kV, line to earth 4kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips 8. Safety Standards/ 8.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60 seconds(3 seconds for production) or 4242Vdc / 3.5mA / 60 seconds(3 seconds for production) : 3000Vac / 3.5mA / 60 (: 3 ) 4242Vdc / 3.5mA / 60 (: 3 ) 8.2. Leakage Current/ 0.25mAmax. at 264Vac / 50Hz input/ 264Vac/50Hz 0.25mA 8.3. Insulation Resistance/ 20M min. @ primary to secondary add a 500Vdc test voltage 500Vdc , 20M 8.4. Regulatory Standards/ Type UL/CUL TUV CCC CE Country USA Europe China Europe Standard UL60950-1 EN60950-1 GB4943 EN60950-1 Type PSB PSE NOM GOST Country Standard Singapore IEC60950-1 Japan J60950 Mexico NOM-001 Russia MEK60950 Page 7 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9. Mach. Outline Drawing/ Page 8 10. Label Drawing/ SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 9 11. Package Drawing/ SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 10PrimoPDF PrimoPDF http://www.primopdf.com/