CAPBs - Espanol.systronik.com

4 www.systronik.com The CAPBs constitute a modular system consisting of the universal handles CAPBs module or CAPBs device and an application-specific sensor unit CAPBs sens for a wide variety of measured variables such as pressure, temperature, air quality or water quality.

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 40 Pages, 8.66MB

Document DEVICE REPORT
PDF 200217 CAPBs Katalog EN v22001 web
BlueLine®
CAPBs®
Modular system

2

www.systronik.com

Contents

CAPBs® module

6

CAPBs® device

6

CAPBs® interface

7

Accessories

8

Sets

8

EuroSoft® live app

10

Pressure

CAPBs® sens PS

11

Accessories

15

Sets

16

Pressure transmitter

CAPBs® sens PT

17

Accessories

19

Sets

21

Pressure & temperature

CAPBs® sens FP

22

Accessories

22

Temperature

CAPBs® sens TK

23

Accessories

24

Air temperature & humidity

CAPBs® sens RH

28

Accessories

28

Air quality

CAPBs® sens AQ

29

Accessories

30

CO detection

CAPBs® sens CO

31

Gas sniffer

CAPBs® sens GS

31

Water quality

CAPBs® sens WQ

32

Accessories

33

Sets

34

Volume flow & temperature

FlowTemp® STx

35

3

Universal. Accurate. Flexible.
Practical modularity with the CAPBs® module and the CAPBs® device

The CAPBs® constitute a modular system consisting of the universal handles CAPBs® module or CAPBs® device and an application-specific sensor unit CAPBs® sens for a wide variety of measured variables such as pressure, temperature, air quality or water quality. According to the ,,plug & play" principle, the sensor units are inserted into the handles, thus combining them into a complete ready-to-use measuring instrument. The measured values can be transferred via the free EuroSoft® live app on a tablet or smartphone. In this way, for example, all the tasks of a heating system engineer or a chimney sweeper can be performed with a single measuring instrument.
Both the CAPBs® module and the CAPBs® device are equipped with magnets and unlock buttons for exchanging the CAPBs® sens at the rear side. The snap-in mechanism on top respectively on bottom of the CAPBs® device is standardised for all CAPBs® sens. The multicolour LED indicates the status of the CAPBs® measuring units by means of different colours and flashing frequencies. Furthermore the handles contain a beeper which indicates excess concentrations or limit values by means of audible signals with different frequencies.

4

www.systronik.com

CAPBs®module CAPBs®device

CAPBs® online

5

CAPBs®module
Base handle
Description Universal base handle for all CAPBs® sensor units. Ergonomic handle with three magnets and battery compartment at the rear of the housing. Multicolour LED and multi-purpose key on the front. With Bluetooth® to transfer the sensor values and integrated beeper for audible signals.

Technical specifications
Dimensions HxWxD Data interface Power supply Part no.

140 x 45 x 39 mm Bluetooth® (range: 50 m) 2x AAA alkaline batteries or 2x AAA rechargeable batteries M091 00 00 17

CAPBs®device
Display handle

Description Modular display unit for all CAPBs® sens. The sensors can either be installed on top or bottom side. The 2.4" screen shows directly the measured values of the installed CAPBs® sensor. Via the CAPBs® device QR code generator or Bluetooth® the values could be transferred to the EuroSoft® live app to create professional measurement reports. The instrument is equipped with three navigation keys, magnets at the rear of the housing and a integrated beeper for audible signals.

Technical specifications
Dimensions HxWxD Display Data interface Power supply Mains operation Part no.

155 x 62 x 42 mm 2.4" TFT Bluetooth® (range: 50 m), QR code Rechargeable lithium-ion battery USB mains unit M093 00 00 10

6

www.systronik.com

CAPBs®interface basic (IF10)
for CAPBs® device

Description Interface unit for charging, power supply and firmware update of the CAPBs® device.

Technical specifications Dimensions HxWxD Connection Part no.

59 x 42 x 35 mm USB-C M094 00 39 10

CAPBs®interface logger (IF20)
for CAPBs® device

Description Interface unit for charging, power supply and firmware update of the CAPBs® device. The CAPBs® interface logger activates the datalogger functions on the CAPBs® device and in the EuroSoft® live Windows software. A practical feature is the possibility to configure log profiles with different start and end conditions on the internal memory of the logger unit.

Technical specifications
Dimensions HxWxD Connection Memory Part no.

59 x 42 x 35 mm USB-C 256 MB (600,000 readings) M094 00 39 11

internal
256 MB
7

Accessories CAPBs® module & device Article
Charging and data cable USB-A on USB-C, length: 1 m Power supply unit USA/EURO/AU/UK, 5W

Charger inclusive 2x AAA rechargeable batteries 2x AAA rechargeable batteries NiMH 1.2 V/800 mAh Wall mount for CAPBs® device, including screw set and padlock Box for CAPBs® device with inlay i-Boxx with inlay Water protection cover

module device

Part no. 524697 523493 524215 524216 511263 524740 500905 524259

8

www.systronik.com

CAPBs® device basic set
P00052
Application The CAPBs® device set including the CAPBs® interface basic is a display unit for all CAPBs® sens. Various CAPBs® sens allows to measure pressure, differential pressure, flow, temperature, humidity, air quality, water quality, indoor air quality as well as detect gas leakage.
Scope of delivery CAPBs® device with cover cap CAPBs® interface basic Data cable USB mains unit Box
Compatibility For all CAPBs® sens and CAPBs® interface
CAPBs® device logger set
P00100
Application The CAPBs® device set including the CAPBs® interface logger is a display unit for all CAPBs® sens. Various CAPBs® sens allows to measure pressure, differential pressure, flow, temperature, humidity, air quality, water quality, indoor air quality as well as detect gas leakage. The CAPBs® interface logger activates the datalogger functions on the CAPBs® device.
Scope of delivery CAPBs® device with cover cap CAPBs® interface logger Data cable USB mains unit Box
Compatibility For all CAPBs® sens and CAPBs® interface
9

EuroSoft® live
for iOS, Android and Windows
Description The free EuroSoft® live is available both as an app for mobile devices and as software for Windows PCs. Measured values are transferred quickly and easily via Bluetooth® or QR code. With EuroSoft® live, these can then be conveniently visualized, saved in measurement logs and shared via the usual communication options such as e-mail, WhatsApp, cloud services. Ideal for professional, comprehensive results documentation for customers.
In conjunction with the CAPBs® device incl. CAPBs® interface logger, log processes can be conveniently configured, read out and further processed on the PC. In addition, the software is used for firmware updates.

Download software

Download app

Application overview

iOS

CAPBs® module

Live measurement values Application-specific and menu-driven programs Measurement data displayed in a line diagram PDF-Reports with customer data, line diagram and additional information Firmware update Export measurement data from line diagram in CSV-file

CAPBs® device basic

Live measurement values Application-specific and menu-driven programs Measurement data displayed in a line diagram PDF-Reports with customer data, diagram and additional information Firmware update QR code measurement data transfer

CAPBs® device logger

Live measurement values Application-specific and menu-driven programs Measurement data displayed in a line diagram PDF-Reports with customer data, diagram and additional information Firmware update QR code measurement data transfer Data logger profile configuration Visualization of data logfiles and creation of logging reports (PDF) or logging files (CSV)

Android Windows

10 www.systronik.com

EuroSoft® live for Windows

CAPBs®device

EuroSoft® live for iOS and Android

CAPBs®module

11

CAPBs®sens PS10
Pressure range 20 mbar

Description Sensor unit for measurement of pressure, vacuum and differential pressure of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperature-compensated.

Application Measurement of ultra-fine pressure Air flow measurement

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no.

74 x 42 x 35 mm -20 / +20 mbar ±0.003 mbar or 0.5 % RDG ±1 digit 0.001 mbar Ø 8 mm M090 05 01 10

0.5 / 50 m/s ±3 m/s 0.1 m/s

Pitot

CAPBs®sens PS20
Pressure range 180 mbar

Description Sensor unit for measurement of pressure, vacuum and differential pressure of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated.

Application Check of connection and flow pressure in gas-fired heating systems Air flow measurement (*only with CAPBs® module)

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

74 x 42 x 35 mm -180 / +180 mbar ±0.003 mbar or 0.5 % RDG ±1 digit
0.01 mbar (< 99.99) 0.1 mbar (> 100.0)
Ø 8 mm M090 01 01 10

0.5 / 50 m/s* ± 0.8 m/s*
0.1 m/s*

12 www.systronik.com

Pitot

CAPBs®sens PS22
Pressure range 180 mbar

Description Sensor unit for measurement of pressure and vacuum of non-corrosive, gaseous, dry media. Manual correction of the zero point allows to double the measuring range. The high quality sensors are extremely accurate, orientation independent and temperature-compensated.

Application Check of connection and flow pressure in gas fired heating systems Tightness test of gas lines

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

89 x 42 x 35 mm 0 / +180 mbar ±0.03 mbar or 0.5 % RDG ±1 digit
0.01 mbar (< 99.99) 0.1 mbar (> 100.0)
Pressure test valve M090 01 34 10

CAPBs®sens PS33
Pressure range 2 bar

Description Sensor unit for measurement of pressure and vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated.

Application Leak tightness checks of gas pipes according to TRGI 2018 Sensor features barometric pressure determination Tightness and load test of gas lines, water pipes or other systems Extremely accurate and DVGW-compliant measuring results

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

74 x 42 x 35 mm -1 / +2 bar ±0.3 mbar or 0.5 % RDG ±1 digit
0.1 mbar (< 999.99) 1 mbar (> 1,000)
Ø 8 mm M090 19 29 10

13

CAPBs®sens PS40/41/42
Pressure range 6 bar

Description Sensor unit for measurement of pressure, vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated.

Application Tightness and load test of gas lines, water pipes or other systems

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

74 x 42 x 35 mm

-1 / +6 bar

±0.3 mbar or 0.5 % RDG ±1 digit

0.1 mbar (< 999.99) 1 mbar (> 1,000)

Ø 8 mm

Ø 3 mm (Festo)

M090 08 29 10

M090 08 30 10

Pressure test valve M090 08 34 10

Application video

CAPBs®sens PS60/61/62
Pressure range 20 bar

Description Sensor unit for measurement of pressure, vacuum of non-corrosive, gaseous, dry media. The high quality sensors are extremely accurate, orientation independent and temperaturecompensated.

Application Tightness and load test of gas lines, water pipes or other systems

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

74 x 42 x 35 mm

-1 / +20 bar

±1 mbar or 0.5 % RDG ±1 digit

0.1 mbar (< 999.99) 1 mbar (> 1,000)

Ø 8 mm

Ø 3 mm (Festo)

M090 10 29 10

M090 10 30 10

Pressure test valve M090 10 34 10

14 www.systronik.com

Accessories CAPBs® sens PS Article Connection set for differential pressure measurement High pressure hose set D3 to G1/8", 15 bar, length: 1 m Pressure test valve Pumpball with connection hose, length: 0.5 m Syringe for test volume, 100 ml, scaling 2 ml Connection hose with plug-in nipple DN2.7 and coupling DN5, length: 1 m Pitot-pipe 360 mm and connectors 2x D7, tube length: 1.5 m Pitot-pipe 460 mm and connectors 2x D7, tube length: 1.5 m Conical test plug 1/2" - 3/4" with connector DN5 Conical test plug 3/4" - 11/4" with connector DN5 Cylindrical test plug 1/2" with connector DN5 Cylindrical test plug 3/4" with connector DN5 Cylindrical test plug 1" with connector DN5 Cylindrical test plug 11/4" with connector DN5 Test cap 3/8" with connector DN5 Test cap 1/2" with connector DN5 Test cap 3/4" with connector DN5 Test cap 1" with connector DN5 Stage stop plug 3/8" and 3/4" with connector DN5 Stage stop plug 1/2" and 1" with connector DN5 Stage stop plug 11/4" with connector DN5

PS10 PS20 PS22 PS33 PS35 PS40 PS41 PS42 PS60 PS61 PS62

Part no.
500237 500234 500670 511018 523174 500685 500238 500238.1 500678.1 500678.2 500678.3 500678.4 500678.5 500678.6 511171 511172 511173 511174 500679.1 500679.2 500679.3
15

16 www.systronik.com

CAPBs® DPK 60-6 sens - tightness test
P00098
Application Suitable for tightness tests (150 mbar) and load tests (1 bar) on gas pipes and for checking the connection and flow pressure as well as the pressure loss. Can also be used for tightness tests (150 mbar) and strength tests (3 bar) on drinking water pipes. Ideal for acceptance tests of heating system pipes, solar system pipes, underfloor heating systems, liquid gas pipes and oil pipes.
Scope of delivery CAPBs® sens PS40 Pressure test valve with quick-action coupling and high-precision adjustment valve Hand-operated bulb pump with valve and connection hose 2x conical test plug for pipe diameter ¾" ­ 1¼" with plug-in nipple Y-connector Connection hoses with plug-in nipple and quick-action coupling Modular system case M "DPK"
Compatibility CAPBs® sens PS40
High pressure tightness set
P00026
Application For device connection D8mm up to 18 bar test pressure. For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness and load test of gas lines, water pipes or other systems.
Scope of delivery Pressure test valve with quick-action coupling and high-precision adjustment valve 2x multiple connection plugs for connection thread 3/8" ¾" and ½" 1" with plug-in nipple Filling hose (0.2 m) ADV for compressor connection Connection hose with plug-in nipple DN2.7 and coupling DN5
Compatibility CAPBs® sens PS40 CAPBs® sens PS60

CAPBs®sens PT70
Pressure transmitter

Description Pressure transmitter for measurements in liquids and gaseous media.

Application Pressure tests of oil pipes Tightness tests/strength tests of drinking water installations Tightness and load test of gas lines, water pipes or other systems Pressure test at pipe systems Stress pressure test at pipe systems

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no.

76 x 42 x 35 mm 0 / +25 bar 0.5 % of full scale ±1 digit 0.1 bar Plug connection DN5 M090 14 28 10

17

CAPBs®sens PT85
Pressure transmitter

Description Sensor unit for measurement of pressure, vacuum and differential pressure of liquids and gaseous media. High quality sensor with wide measurement range and high accuracy.

Application Tightness and load test, strength test of gas lines, water pipes or other systems Pressure tests of oil lines Stress pressure tests at pipe systems Hydraulic balancing at thermostatic valve

Technical specifications Dimensions HxWxD Measuring range Accuracy
Resolution
Hose connection Part no.

80 x 42 x 35 mm 7 bar ±10 hPa or 1 % RDG
0.1 hPa (< 999.99) 1 hPa (> 1,000)
2x plug-in nipple DN2.7 M090 22 35 10

CAPBs®sens PT86
Pressure transmitter

Description Sensor unit for measurement of pressure, vacuum and differential pressure of liquids and gaseous media. High quality sensor with wide measurement range and high accuracy.

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Hose connection Part no.

99 x 42 x 35 mm 20 bar ±25 hPa or 1 % RDG 1 hPa 2x coupling DN2.7 M090 27 35 10

Application Tightness and load test, strength test of gas lines, water pipes or other systems Pressure tests of oil lines Stress pressure tests at pipe systems Adjustment of balancing valves

18 www.systronik.com

Measuring needle

Accessories CAPBs® sens PT Article

T-connector with 2x coupling, 1x plug-in nipple and shut-off valve

Adapter for compressor connection, with coupling DN5 and plug-in nipple DN7.2

Test plug 1/2" with connector DN5

Conical test plug 1/2" - 3/4" with connector DN5

Conical test plug 3/4" - 11/4" with connector DN5

Cylindrical test plug 1/2" with connector DN5

Cylindrical test plug 3/4" with connector DN5

Cylindrical test plug 1" with connector DN5

Cylindrical test plug 11/4" with connector DN5

Test cap 3/8" with connector DN5

Test cap 1/2" with connector DN5

Test cap 3/4" with connector DN5

Test cap 1" with connector DN5

Stage stop plug 3/8" and 3/4" with connector DN5

Stage stop plug 1/2" and 1" with connector DN5

Stage stop plug 11/4" with connector DN5

PT70 PT85 PT86

Part no. 511182 500695 500696 500694 500678.1 500678.2 500678.3 500678.4 500678.5 500678.6 511171 511172 511173 511174 500679.1 500679.2 500679.3

19

Accessories CAPBs® sens PT Article
Connection hose with 2x coupling DN5, length: 1.2 m Connection hose with plug-in nipple DN5 and coupling DN5, length: 0.3 m Connection hose red with coupling DN2.7 and DN5, length: 1.5 m Connection hose blue with coupling DN2.7 and DN5, length: 1.5 m Connection hose with plug-in nipple DN5 and coupling DN2.7, length: 0.3 m Connection hose with plug-in nipple DN2.7 and coupling DN5, length: 1 m Connection hose with plug-in nipple DN5 and DN2.7, length: 0.3 m Connection hose blue with plug-in nipple DN2.7 and coupling DN5, length: 1.5 m Connection hose red with plug-in nipple DN2.7 and coupling DN5, length: 1.5 m

PT70 PT85 PT86

Part no. 500686.2 500687
511176 511177 511156.1 500685 511184.1 500685.1 500685.2

20 www.systronik.com

CAPBs® set PT70 - water tightness test
P00040
Application For measuring pressure and vacuum, inlet pressure, flow pressure, static pressure and nozzle pressure. Suitable for tightness, load test and strength tests of drinking water installations, pressure tests of oil lines and stress pressure tests at pipe systems.
Scope of delivery CAPBs® sens PT70 T-connector Adapter for compressor connection Connection hose with coupling DN5 and plug-in nipple DN5 Test cap 3/4" with connector DN5 L-Boxx mini

CAPBs® d-set PT70 - pressure logger
P00108
Application Suitable for tightness and load test of gas lines, water pipes, floor heating or other systems up to 25 bar test pressure. Pressure transmitter for measurements in liquids and gaseous media.
Scope of delivery CAPBs® device with cover cap CAPBs® interface logger CAPBs® sens PT70 T-connector Adapter for compressor connection Connection hose with plug-in nipple DN5 Test cap 3/4" with connector DN5 Data cable USB mains unit i-Boxx
CAPBs® set PT86 - hydronic balance
P00057
Application For measuring the differential pressure to adjust the flow rate at line valves or balancing valves as part of the hydraulic balancing process. Useable for different types of balancing valves of various brands.
Scope of delivery CAPBs® sens PT86 2x test cap 3/4" with connector DN5 2x measuring needle with connector DN5 Measuring needle drill Measuring hose set Sinterfilter with O-ring Batteries micro AAA Storage vessel i-Boxx
21

CAPBs®sens FP10
Pressure & temperature

Description Sensor unit for simultaneous, continuous measurement of temperature and pressure. The CAPBs® sens FP10 allows for convenient flow rate measurement with a stable zero point.

Application Air flow measurement (Pitot tube) 4Pa measurement (hose kit) (only with CAPBs® module)

Technical specifications Dimensions HxWxD Measuring range
Accuracy
Resolution Part no.

74 x 42 x 35 mm -20 / +20 mbar
±0.003 mbar or 0.5 % RDG ±1 digit
0.0001 mbar M090 05 32 10

0.2 / 20 m/s
±0.1 m/s or ±5 % RDG
0.01 m/s

-50 / +600 °C ±1.5 °C 0.1 °C

Accessories CAPBs® sens FP10 Article
Pitot pipe 165 mm, D8 with cone Hose kit 4Pa test, length: 4 m Hose kit 4Pa test D8/D8, length: 4 m Surface temperature sensor micro type K

Pitot Temperature

Part no. 500663 500664 511060 522991

22 www.systronik.com

CAPBs®sens TK10
Temperature type K

Description Temperature transmitter with standardised temperature socket type K. This allows for the connection of all type K two-pole thermocouples and temperature probes (for example, the complete temperature probe range).

Application Temperature measurement

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Connection Part no.

58 x 42 x 35 mm -50 / +1,150 °C (depends on thermocouple used) ±1.5 °C 0.1 °C Probe: 1x type K M090 00 08 10

CAPBs®sens TK11
Temperature type K

Description Temperature transmitter with two standardised temperature sockets type K. This allows for the connection of all type K two-pole thermocouples and temperature probes (for example, the complete temperature probe range). In conjunction with BLUELYZER® ST, it is, for example, possible to measure up to four temperature values.

Application Temperature measurement Differential temperature measurement Determination of the temperatures of flow and return

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Connection Part no.

58 x 42 x 35 mm -50 / +1,150 °C (depends on thermocouple used) ±1.5 °C 0.1 °C Probe: 2x type K M090 00 09 10

23

Accessories CAPBs® sens TK10 & TK11 Article
Temperature surface probe to 450 °C, type K Temperature penetration probe to 600 °C, type K Temperature liquid/gas probe to 900 °C, type K Clamp probe for pipes <D36 mm, max. 120 °C, type K Air sensor 20 mm with magnet, type K, length: 2.5 m Air sensor 20 mm with cone, type K, length: 2.5 m Air sensor 80 mm with cone, type K, length: 2.5 m Air sensor 80 mm with magnet and cone, type K, EN50379, length: 2.5 m Air sensor 200 mm with cone, D5, type K Air sensor, type K

TK10 TK11

Part no. 523033 523034 523035 511098 500141 500141.4 500141.0 500141.1 500147 521844

CAPBs® set TK11 - heat pump
P00112
Application For measuring of temperatures on heating system pipes, water pipes, refrigeration systems or heat pumps. Suitable for differential temperature measurement and determination on the temperatures of flow and return.
Scope of delivery CAPBs® sens TK11 2x clamp probe L-Boxx mini

24 www.systronik.com

CAPBs®sens TK20
Temperature

Description Penetration probe for measurement of the temperature in liquids and soft plastic media.

Technical specifications
Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no.

42 x 186 x 35 mm 3 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 22 10

Application Temperature measurement

CAPBs®sens TK30
Temperature

Description Liquid probe for measurement of the temperature in liquids.

Application Temperature measurement

Technical specifications
Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no.

42 x 187 x 35 mm 1.5 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 23 10

25

CAPBs®sens TK35
Temperature

Description Liquid probe for measurement of the temperature in liquids.

Application Temperature measurement

Technical specifications
Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no.

190 x 42 x 35 mm 3 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 24 10

CAPBs®sens TK40
Temperature

Description Air probe for measurement of the temperature in air.

Technical specifications
Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no.

187 x 42 x 35 mm 4.7 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 25 10

Application Temperature measurement

26 www.systronik.com

CAPBs®sens TK50
Temperature

Description Surface probe for measurement of the temperature on surfaces.

Technical specifications
Dimensions HxWxD Probe diameter Measuring range Accuracy Resolution Part no.

187 x 42 x 35 mm 4 mm -50 / +400 °C ±1.5 °C or 1 % RDG 0.1 °C M090 00 26 10

Application Temperature measurement

27

CAPBs®sens RH80
Air temperature & humitidy

Description Sensor unit for measurement of temperature and relative humidity in ambient air. Calculation of absolute humidity and dew point temperature.

Application Checks of the climatic conditions in rooms Mould prevention Evaluation of the indoor air quality (IAQ)

Technical specifications Dimensions HxWxD Measuring range
Accuracy
Resolution Part no.

82 x 42 x 35 mm 0 / 100 % r.h.
±2 % r.h. ±1 digit
0.1 % r.h. M090 11 12 10

-40 / +80 °C
±0.5 °C ±1 digit
0.1 °C

Temperature

28 www.systronik.com

CAPBs®sens AQ20
Air quality

Description Sensor unit for fast and reliable detection of VOCs (volatile organic compounds) and CO2 in ambient air. The gas concentration is displayed by the evaluation unit as CO2 (ppm) and TVOC (ppb); the CAPBs® measurement unit provides an audible signal.

Application Monitor of the air quality in rooms Inspection of filters Detection of leaks in conjunction with hazardous substances Redundant measurement in conjunction with PID measurements

Technical specifications
Dimensions HxWxD Measuring range Resolution Part no.

58 x 42 x 35 mm 450 / 2,000 ppm CO2 equivalent 1 ppm M090 12 00 10

125 / 600 ppb TVOC equivalent

CAPBs®sens AQ35
Air quality

Description Sensor unit for measurement of carbon dioxide. The highly accurate CO2 infrared sensor has a very low drift; it can be adjusted in fresh air. Thanks to the possibility to conveniently enter the measuring time, it is possible to check and document given CO2 mean values.

Technical specifications
Dimensions HxWxD Measuring range Accuracy Resolution Part no.

83 x 42 x 35 mm 0 / 10,000 ppm CO2 ±70 ppm or +3 % RDG 1 ppm M090 23 00 10

Application CO2 concentration measurement Assessment of the ambient air quality in rooms For adjustment of ventilation and air conditioning systems as per EN 13779 or TRGS 900 (limit values for workplaces) Evaluation of the CO2 in closed rooms (e.g. in schools, offices, conference rooms, libraries etc.)

29

CAPBs®sens AQ36
Air quality

Description Sensor unit for measurement of carbon dioxide, humidity and temperature. The highly accurate CO2 infrared sensor has a very low drift; it can be adjusted in fresh air. Thanks to the possibility to conveniently enter the measuring time, it is possible to check and document given CO2 mean values.

Application CO2 concentration, humidity and temperature measurement Indoor air quality (IAQ) measurements Assessment of the ambient air quality in rooms For adjustment of ventilation and air conditioning systems as per EN 13779 or TRGS 900 (limit values for workplaces) Evaluation of the air quality in closed rooms (e.g. in schools, offices, conference rooms, libraries etc.)

Relative humidity Temperature

Technical specifications Dimensions HxWxD Measuring range
Accuracy
Resolution Part no.

115 x 42 x 35 mm 0 / 10,000 ppm CO2 ±70 ppm +3 % RDG
1 ppm M090 26 00 10

0 / 100 % r.h.
±3 % r.h. (at 25°C)
0.1 % r.h.

-40 / +125 °C ±2 °C 0.1 °C

30 www.systronik.com

CAPBs® d-set AQ36 - IAQ logger
P00107
Application Complete IAQ logger kit for monitoring of carbon dioxide (CO2), humidity and temperature. The highly accurate CO2 infrared sensor has a very low drift and can be adjusted in fresh air. Scope of delivery
CAPBs® device with cover cap CAPBs® interface logger CAPBs® sens AQ36 Data cable USB mains unit L-Boxx mini
31

CAPBs®sens CO30
CO detection

Description Sensor unit with electro-chemical sensor for fast and reliable detection of CO (carbon monoxide) in ambient air. The CO concentration is displayed by the evaluation unit as CO value in ppm; the CAPBs® measurement unit provides an audible signal when the alarm threshold is exceeded.

Technical specifications
Dimensions HxWxD Measuring range Resolution Part no.

64 x 42 x 35 mm 0 / 2,000 ppm CO 1 ppm M090 16 33 10

Application CO detection and concentration measurement Application in boiler rooms or at flue gas pipes, for example for self-protection during flue gas line tests

32 www.systronik.com

CAPBs®sens GS10
Gas sniffer

Description Sensor unit for fast and reliable gas leak detection. The flexible probe allows for use in spaces difficult to access. The gas concentration is displayed by the evaluation unit in ppm; the CAPBs® measurement unit provides an audible signal. The alarm threshold can be adjusted as required. Due to the base calibration for methane, a wide range of flammable gases is detectable. The anti-poisoning protection function for the sensor ensures a long service life.

Application Gas leak detection Detection of gas leaks (flammable gases) in gas pipes as well as connection pieces and fittings, gas meters, gas burners and gas tanks

Technical specifications
Dimensions HxWxD Measuring range Resolution Part no.

290 x 42 x 35 mm 0 / 2,000 ppm CH4 10 ppm M090 13 14 10

CAPBs® d-set GS10 - gas sniffer
P00063
Application Set for detecting gas leaks in gas pipes, gas meters, gas burners and gas tanks.
Scope of delivery CAPBs® device with cover cap CAPBs® interface basic CAPBs® sens GS10 Data cable USB mains unit L-Boxx mini
Application video
33

CAPBs®sens WQ10
Water quality

Description CAPBs® sens WQ10 simultaneously determines the pH value, the electrical conductivity (S/cm) and hardness (°dH) with a single measurement. In addition, the TDS value (total dissolved solids in the water), salinity and temperature can be measured. Thanks to automatic measuring range switching, the conductivity can be measured with a high measuring accuracy within a large measuring range.

Application Determination and evaluation of water quality Assessment of system water in heating systems (for example, heating system water analysis as per VDI 2035) Measurement of pH value, electrical conductivity, hardness, TDS value, salinity and temperature

Technical specifications Dimensions HxWxD Part no.

130 x 43 x 36 mm M090 25 13 10

Electrical conductivity
Salinity TDS value pH value Temperature

Measuring range Resolution

0 / 50,000 S/cm

1 S/cm 0.1 mS/cm

0 / 25,000 ppm
0 / 50,000 mg/l 0 / 14 pH -5 / +60 °C

0.1 ppm 0.01 ppt
T1 mg/l 0.01 pH 0.1 °C; 0.1 °F

Accuracy ±2 S/cm (< 199 S/cm) ±5 S/cm (200 > 499 S/cm) ±20 S/cm (500 > 1999 S/cm) ±0.2 mS/cm (2.00 > 19.99 mS/cm) ±0.5 mS/cm (20.00 > 50.00 mS/cm)
-
0.01 g/l ±0.01 pH ±0.5 °C

34 www.systronik.com

Accessories CAPBs® sens WQ10 Article
Case with calibration solutions and titrant Hardness measuring cutlery, single pack Storage solution, electrolyte potassium chloride 3 mol/l, 50 ml Conductivity calibration solution 1,413 mS, 100 ml Conductivity calibration solution 12,88 mS, 100 ml Test solution pH4, 100 ml Test solution pH7, 100 ml Cleaning solution, 100 ml

Part no. 511094 524683 524405 524407 524408 524410 524411 524412

35

WQ10 set
P00032
Application Modular extension kit for easy assessment of corrosion damage in in heating systems and installations Ready to use in combination with all BlueLine® measuring instruments, smartphones or tablets as evaluation devices Multi-sensor for pH value, electrical conductivity, German hardness, salinity and temperature
Description Complete on-site kit for quick assessment concerning the necessity of corrosion protection measures or system cleaning in the practical system case M with sensor unit CAPBs® sens WQ10 and all associated calibration solutions and sample containers.
Scope of delivery Sensor unit CAPBs® sens WQ10 Calibration solutions for pH value Calibration solutions for electrical conductivity Sample containers Cleaning solution Storage solution Hardness measuring cutlery Modular system case M

36 www.systronik.com

Application video

FlowTemp® STx
Volume flow & temperature
Description Instrument for continuous, simultaneous determination of temperature (°C) and volume flow (l/min) and in water applications. The volume rate is measured with a high-precision capacitance flow sensor, the temperature with a type K module. Both sensors are integrated in a robust housing made of high quality plastic with degree of protection IP 67. Thanks to the compact design, measurements at low water fittings are very convenient. Via Bluetooth® the sensor values can be transfered to the free EuroSoft® live App.
EuroSoft® live app
37

Application Risk analysis in drinking water installations (EN 806) Function checks of decentralised drinking water heaters Documentation of water sampling for laboratories Determination of the water temperature at water taps (EN 806-2; DIN EN 1988-200) Acceptance tests of newly installed drinking water installations Verification and documentation of thermal disinfection against legionella (DVGW 557)

Technical specifications Dimensions HxWxD Measuring range
Accuracy
Resolution Response delay (t90) Sensor Sampling rate Data interface Power supply Part no.

158 x 71 x 97 mm

1.5 / 17.5 l/min

+5 / +80 °C

±0.3 l/min or ±5 % RDG

±1 °C or ±3 % RDG

0.1 l/min

0.1 °C

< 10 s

< 5 s

Capacitive sensor

type K

1 sec

Bluetooth®

2x AAA alkaline batteries or 2x AAA rechargeable batteries

502002

Volume flow Temperature

38 www.systronik.com

FlowTemp® online

The SYSTRONIK GmbH is specialized in development and production of high-quality measuring instruments for flue gas analysis, testing and maintaining HVAC installations, climate and environmental technology. All SYSTRONIK products satisfy the highest standards for quality, reliability and safety.
Our facilities are certified to full operational requirements of the ISO 9001 quality standard. We are constantly striving to improve our quality assurance position with input from periodic audits by independent experts required for continued certification.

Distributor:
Elektronik und Systemtechnik GmbH Gewerbestraße 57 88636 Illmensee, Germany Phone +49 7558 9206-0 Fax +49 7558 9206-20 [email protected] www.systronik.com

Subject to change - v22001
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SYSTRONIK is under license. Google Play and the Google Play logo are trademarks of Google LLC. Apple and the Apple logo are trademarks of Apple Inc.


Adobe PDF Library 16.0.5 Adobe InDesign 17.1 (Windows)

Search Any Device: