R&D
Antenna Specification
Case-Mate, Inc. CQ049650 Wireless charging equipment 2AAC4CQ049650 2AAC4CQ049650 cq049650
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 8 Pages, 415.75KB
Document DEVICE REPORTGetApplicationAttachment.html?id=6212045SINYOTechnology(Dongguan)co., Ltd. TEL: 0769-86551123 FAX: SAMPLE SPECIFICATION FOR APPROVAL /Customer PYS High-Tech Co., LTD /Part Name Coil /Liyin Part 20.5*41.5*0.08*45PX11TS /Customer Part No. ECM_QIA11X1AAA_V2.0 /Rev. 01 /Date 2022.6.1 / Customer Approved And Signature /SINYO Approved bingxiangxie 1./Sample Submission Reason 1./New SPEC 2.New Material/ 2./Request For New SPEC. /Current /Request 3.ECR/ /Reason /Remark: 1. ISO, Important When Sample Approved,Please Sign And Returned By Fax,Before Place Order Inorder To Fulfill Our ISO Requirement ! 2. . Above product comply to SINYO Environmental material system requirement. 3. ! In Event Of No Sign Back,We Will Under Take P.O. As Acceptance To Sample Approval! CONTENTS/ 1.Product Specification/ 2.Contents/ 3.Version Change History / 4.Drawing/ 5.Electrical Characteristic/ 6.Material List/ 7.Manner of packing/ 8.Reliability Test / 1 2 3 4 5 6 7 8 SINYOTechnology(Dongguan)co., Ltd. Version Change History Rev. Before Change A01 New Issue After Change ---- Change Date 2022/6/1 Approved By weiwei remarks 2+1/-0.5 The thickness is not measured at the back bend 51 12.5 2.0 81 version Update records revise tagging Modification time A.01 first edition High temperature tape Audit 18 0.5 Handle 21.5 0.5 41.5 0.5 0 43.5 -0.5 This side is fully glued 3M9448A ferite large0.8 0.1 ferite small0.5 0.1 coil+tab:0.55 0.1 Adhesive backing:0.05 3M 9488A:0.15 Total:1.65max Ferrite technical requirements: 1. Use manganese zinc BP40 2. The parts are smooth and clean, and no convex dents shall appear 3. Products must be environmentally friendly Coil technical requirements: 1. Wire specification: 0.08mm*45P enameled copper wire 2.Coil specifications:COIL, ID21.5*21.5*0.08*45P*1P*x10TS*0.55(max) 3. Cable length 5±1mm; Lead immersion length 2+1/0.5mm. 4. Neat winding, do not damage the surface enamel layer; Appearance requirements: Class 2. 5. Unnoted size according to the drawing file. 6. Unmarked tolerance: wire 0.2mm, R angle 0.5mm. 7. The product meets the requirements of halogenfree and meets the salt spray test 48H. 8. Do not replace materials and surface treatment without permission. 9. The symbol ball on the drawing is the key control dimensioning Size 10.7 CPK>0.7 Finished electrical specifications: (@1V 100KHZ) Finished product (coil + ferrite) LS: 7.0uH±5% DCR:100 (max) Q : TBD General tolerances Figure name Figure number Part Sinyo Technology(Dongguan) Co.,Ltd number 0.02mm Projected 0.5 viewing angle 1. Unmarked edge chamfer C0.5; 2. The following table without tolerances shall prevail 3. Key inch method* devise TX COIL EIM_QIA11X11AAA_V2.0 1031.00266 bing xiangproofread xie quant ity propo rtion unit 1:1 mm date 2022/10/18 wei Audit wei SINYOTechnology(Dongguan)co., Ltd. /CUSTOMER PYS High-Tech Co., LTD .ELECTRICAL SPECIFICATION 1.Inductance7.0±5% uh ELECTRICAL CHARACTERISTIC /Part Name Coil /SINYO PART NO. /CUSTOMER PART NO. 21.5*42*0.08*45PX10TS ECM_QIA11X1AAA_V2.0 TEST CONDITION 100KHZ/1.0V /instrument NO. 2.Rdc Resistance100mMAX 3.Q:>TBD 25 TEST CONDITION 100KHZ/1.0V /instrument NO. /instrument NO. SINYO Sample test list ELECTRICAL TEST DATA(): Part Name: COIL Part NO./: 21.5*42*0.08*45PX10TS CUST. PART No: . ELECTRICAL CHARACTERISTIC /Part NO.of wire specification: 2UEW-HB0.08*45P SAMPLE() NO.1 1./Inductance(7.0 ±5% H) 6.83 6.88 6.88 6.86 2./DC Resistance(100m MAX) 83.46 83.70 83.56 83.57 3.Q:>TBD .SIZE 51.15 52.24 51.17 52.15 TEST ITEM /Parameter Conditions NO.1 SAMPLE() NO.2 NO.3 NO.4 /Test Data: 2022.6.1 /Checker:Ares xie 6.95 83.78 52.31 Judge OK OK OK Equipment NO.5 Judge 1.65mm MAX ___ 1.57 1.59 1.56 1.56 1.57 OK /Thickness Callipers / Lead wire S=F=5±1.0mm ___ 5.06 4.80 4.58 4.57 4.65 /2.5D OK length /Solder length 2+1-0.5mm ___ 1.75 1.58 1.68 1.87 1.84 /2.5D OK /O.D. 41.5±0.5mm ___ 41.13 41.22 41.24 41.25 41.26 /2.5D OK /I.D. Outer diameter of magnetic disc /spacing 21.5±0.5mm 43.5±0.5mm 12.5+/-2 ___ 21.33 21.35 21.52 21.73 21.55 /2.5D OK ___ 43.20 43.26 43.23 43.30 43.21 /2.5D OK ___ 11.33 12.53 12.21 11.19 10.58 /2.5D OK SINYOTechnology(Dongguan)co., Ltd. FAX:0769-86551123 /Prepamed by Reviewed By bingxiangxie bingxiangxie /Approved By weiwei Rev.01 Material SINYOTechnology(Dongguan)co., Ltd. List /CUSTOMER /Part Name PYS High-Tech Co., LTD COIL /SINYO PART NO. /CUSTOMER PART NO. 21.5*42*0.08*45PX10TS ECM_QIA11X1AAA_V2.0 / Material name /Material /NO. part NO. 1 /Copper wire 2UEW-HB0.08*45P 2 /Lead-Free Solder YD-99.9%Sn 3 /Foam plate 360*260*6025lattice 4 /Glue 5 /Feerite SH-8536 Ø 43 .5 *0 .8 6 /Feerite Ø18*0.5 7 /adhesive backing 3M 9448A /Manufacturer WEI FEN YI DA LIN ZHI HE BANG LIN ZE GAN TAI GAN TAI /Prepared By: bingxiangxie /Approved By: weiwei COIL SINYOTechnology(Dongguan) co., Ltd. Manner of packing /Customer PYS High-Tech Co., LTD /part name COIL /part NO / 21.5*42*0.08*45PX10TS /ECM_QIA11X1AAA_V2.0 Packaging method Foam tray packaging specification:360*260*60mm(25lattice 20pcs/lattice 500pcs/tray cartonREF) specification390*290*280mm k=k strengthen 4tray/box 2000pcs/box Wireless charging coil storage method Part number Foam tray packaging 20.5*42*0.08*45PX10TS 4tray/box Store humidity Not more than 80%RH Storage temperature room temperature 3 months (1 year for the coil body, 3 Storage time months for the tinned part of the leads) Environmental Environmental and non-environmentally protection friendly materials are separated from Manufacturing requisition FIFO-out Remarks: 1. Each bundle of COIL should be placed close in the carton, and the middle should be comfortably separated to relieve the shaking of the coil in the carton. /Prepared By: bingxiangxie /Approved By:weiwei SINYOTechnology(Dongguan)co., Ltd. Reliability Test /customer PYS High-Tech Co., LTD /part name COIL /part NO. 21.5*42*0.08*45PX10TS /ECM_QIA11X1AAA_V2.0 /Date2022-6-1 (ITEM) Experiment condition () Test method(Describe the experiment) /remark /Bond Strength 15G MIN COIL,COIL, 90.COIL, . /Tie the two lead wire of coil on the pulling force machine, pull the coil vertically downward until the lead wire loose away from the coil the record the data. /Pinhole test 12V/1minutes COIL /Put the COIL into the pinhole test solution to see if the COIL itself is red. /Prepared By:bingxiangxie /Approved By:weiwei
Related FCC IDs:
- 2AAC4CQ049650 - Case-Mate, Inc. Wireless charging equipment [CQ049650] WPS 文字