Sam Lin

Modular Approval Request Letter

Shenzhen Chuangwei-RGB Electronics Co., Ltd. NTUDT12 WiFi BT USB2.0 Module 2ANM3NTUDT12 2ANM3NTUDT12 ntudt12

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 1 Pages, 303.14KB

Document DEVICE REPORTGetApplicationAttachment.html?id=6418704
Module Approve Request Letter

Date:03-08-2023

FCC ID: 2ANM3NTUDT12, IC: 23165-NTUDT12

To whom it may concern:

The requirements of KDB 996369 has been met and shown on the following statements.

Type of Module: Single Modular Transmitter

No. Requirements

Device Conditions

Comply (Y/N)

1

The radio elements of the modular transmitter must

The shielding of the radio portion can Y

have their own shielding. The physical crystal and

be demonstrated in exhibition

tuning capacitors may be located external to the

External Photo.

shielded radio elements.

2

The modular transmitter must have buffered

Buffered data inputs stage has been Y

modulation/data inputs (if such inputs are provided) to integrated in IC chip RTL8822CU.

ensure that the module will comply with part 15

requirements under conditions of excessive data rates

or over-modulation.

3

The modular transmitter must have its own power

supply regulation.

The part number of the power

Y

regulator is in IC chip RTL8822CU

4

The modular transmitter must comply with the antenna The unconventional antenna

Y

and transmission system requirements of §15.203,

connection method is used. Please

15.204(b) and 15.204(c). The antenna must either be refer to the internal photos for details

permanently attached or employ a "unique" antenna

coupler.

5

The modular transmitter must be tested in a stand-alone Please reference exhibition Test

Y

configuration, i.e., the module must not be inside

Configuration Photo for the stand-

another device during testing for compliance with part alone test configuration.

15 requirements.

6

The modular transmitter must be equipped with either a Please also see the exhibition Label Y

permanently affixed label or must be capable of

Sample.

electronically displaying its FCC identification number.

7

The modular transmitter must comply with any specific The required FCC rule has been

Y

rules or operating requirements that ordinarily apply to a fulfilled and all the instructions for

complete transmitter and the manufacturer must provide maintaining compliance has been

adequate instructions along with the module to explain clearly stated in the User Manual.

any such requirements. A copy of these instructions

must be included in the application for equipment

authorization.

8

The modular transmitter must comply with any

applicable RF exposure requirements in its final

configuration.

Please refer exhibition RF Exposure Y for the compliance of MPE RF
exposure rule.

If you have any questions regarding this, please don't hesitate to contact us.

Sincerely,

By: _______________________engineer__________ _________Dan Fang_______________

(Signature/Title)

(Print name)



Related FCC IDs:

Search Any Device: