Test Report LTE band 5
Leax Arkivator Telecom USA Inc. FT205L 2AVFN-FT205L 2AVFNFT205L ft205l
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 14 Pages, 837.94KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7314615Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China TEST REPORT FCC Part 22 Subpart H Report Reference No......................: CTA24042900104 FCC ID..............................................: 2AVFN-FT205L Compiled by ( position+printed name+signature) .: File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .: Project Engineer Lushan Kong Approved by ( position+printed name+signature) .: RF Manager Eric Wang Date of issue.....................................: May. 07, 2024 Testing Laboratory Name ..............: Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Address ............................................: Fuhai Street, Bao`an District, Shenzhen, China Applicant's name ............................: Leax Arkivator Telecom USA Inc Address ............................................: 833 E Arapaho Rd.Suite 203 Richardson, TX 75081 Test specification ...........................: FCC CFR Title 47 Part 2, Part 22H Standard ...........................................: ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description......................: Industrial 4G Router Trade Mark .......................................: N/A Manufacturer ....................................: Leax Arkivator Telecom USA Inc Model/Type reference.......................: FT205L Listed Models ..................................: N/A Ratings .............................................: DC 12.0V From external circuit Modulation .......................................: QPSK, 16QAM Hardware version .............................: V1.0 Software version ..............................: V1.0 Frequency.......................................... E-UTRA Band 5 Result................................................: PASS Report No.: CTA24042900104 TEST REPORT Page 2 of 14 Equipment under Test : Industrial 4G Router Model /Type : FT205L Listed Models : N/A Applicant : Leax Arkivator Telecom USA Inc Address : 833 E Arapaho Rd.Suite 203 Richardson, TX 75081 Manufacturer : Leax Arkivator Telecom USA Inc Address : 833 E Arapaho Rd.Suite 203 Richardson, TX 75081 Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24042900104 Page 3 of 14 Contents 1 SUMMARY ............................................................................................................................................................4 1.1 TEST STANDARDS .................................................................................................................................................4 1.2 TEST DESCRIPTION ....................................................................................................................................................4 1.3 ADDRESS OF THE TEST LABORATORY ..............................................................................................................................4 1.4 TEST FACILITY...........................................................................................................................................................4 1.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ...........................................................................................................5 2 GENERAL INFORMATION.......................................................................................................................................6 2.1 ENVIRONMENTAL CONDITIONS.....................................................................................................................................6 2.2 GENERAL DESCRIPTION OF EUT...................................................................................................................................6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY ......................................................................................................6 2.4 EQUIPMENTS USED DURING THE TEST...........................................................................................................................6 2.5 RELATED SUBMITTAL(S) / GRANT (S).............................................................................................................................7 2.6 MODIFICATIONS .......................................................................................................................................................7 3 TEST CONDITIONS AND RESULTS ...........................................................................................................................8 3.1 OUTPUT POWER.......................................................................................................................................................8 3.2 SPURIOUS EMISSION ...............................................................................................................................................11 4 TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 14 5 PHOTOS OF THE EUT ........................................................................................................................................... 14 Report No.: CTA24042900104 Page 4 of 14 1 SUMMARY 1.1 TEST STANDARDS The tests were performed according to following standards: FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 22: PRIVATE LAND MOBILE RADIO SERVICES. ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services FCCKDB971168D01 Power Meas License Digital Systems 1.2 Test Description Test Item Section in CFR 47 Result RF Output Power(Conducted Measurement) RF Output Power(Radiated Measurement) Peak-to-Average Ratio 99% & -26 dB Occupied Bandwidth Spurious Emissions at Antenna Terminal Field Strength of Spurious Radiation Part 2.1046 Part 22.913(a) Part 2.1046 Part 22.913(a) Part 24.232 (d) Part 2.1049 Part 22.917(b) Part 2.1051 Part 22.917(b) Part 2.1053 Part 22.917(b) Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Pass Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Referring to the FCC ID No: XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Pass Referring to the FCC ID No: Out of band emission, Band Edge Part 2.1051 Part 22.917(b) XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Referring to the FCC ID No: Frequency stability Part 2.1055 22.917 XMR202008EC25AFXD issued by the Testing Lab (TA technology(shanghai) co., Ltd.) Note1: the LTE module in this product has already finished the certification (FCC ID: XMR202008EC25AFXD), Reference the results in the original test report. 1.3 Address of the test laboratory Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao'an District, Shenzhen, China The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 1.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: Report No.: CTA24042900104 Page 5 of 14 FCC-Registration No.: 517856 Designation Number: CN1318 Shenzhen CTA Testing Technology Co., Ltd. has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. Industry Canada Registration Number. Is: 27890 CAB identifier: CN0127 The Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing. A2LA-Lab Cert. No.: 6534.01 Shenzhen CTA Testing Technology Co., Ltd. has been listed by American Association for Laboratory Accreditation to perform electromagnetic emission measurement. The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.10 and CISPR 16-14:2010. 1.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01" Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 1" and TR-100028-02 "Electromagnetic compatibility and Radio spectrum Matters (ERM);Uncertainties in the measurement of mobile radio equipment characteristics; Part 2 " and is documented in the Shenzhen CTA Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Shenzhen CTA Testing Technology Co., Ltd. : Measuremen Test Range t Notes Uncertainty Radiated Emission 9KHz~30MHz 3.02 dB (1) Radiated Emission 30~1000MHz 4.06 dB (1) Radiated Emission 1~18GHz 5.14 dB (1) Radiated Emission 18-40GHz 5.38 dB (1) Conducted Disturbance 0.15~30MHz 2.14 dB (1) Output Peak power 30MHz~18GHz 0.55 dB (1) Power spectral density / 0.57 dB (1) Spectrum bandwidth / 1.1% (1) Radiated spurious emission (30MHz-1GHz) 30~1000MHz 4.10 dB (1) Radiated spurious emission (1GHz-18GHz) 1~18GHz 4.32 dB (1) Radiated spurious emission (18GHz-40GHz) 18-40GHz 5.54 dB (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Report No.: CTA24042900104 Page 6 of 14 2 GENERAL INFORMATION 2.1 Environmental conditions Date of receipt of test sample : Apr. 11, 2024 Testing commenced on Testing concluded on : Apr. 11, 2024 : May. 07, 2024 During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2 General Description of EUT Product Description: Model/Type reference: Power supply: Adapter information: Testing sample ID LTE Operation Band: Industrial 4G Router FT205L DC 12.0V From external circuit Model: GQ12-120100-CU Input: AC 100-240V 50/60Hz 0.4A Output: 12.0V 1.0A CTA240429001-1# (Engineer sample), CTA240429001-2# (Normal sample) E-UTRA Band 5 Support Bandwidth: Band 5: 1.4MHz, 3MHz, 5MHz,10MHz, TX/RXFrequency Range: E-UTRA Band 5(824 MHz -849MHz) Modulation Type: QPSK, 16QAM Release Version: Release 9 Category: Cat 4 Antenna Type: External antenna Antenna Gain: Band 5: 9.416dBi Note: For more details, refer to the user's manual of the EUT. 2.3 Description of Test Modes and Test Frequency The EUT has been tested under typical operating condition. The CMW500 used to control the EUT staying in continuous transmitting and receiving mode for testing. Regards to the frequency band operation: the lowestmiddle and highest frequency of channel were selected to perform the test, then shown on this report. 2.4 Equipments Used during the Test Test Equipment LISN Manufacturer R&S Model No. ENV216 Equipment No. CTA-308 Calibration Date 2023/08/02 Calibration Due Date 2024/08/01 LISN R&S ENV216 CTA-314 2023/08/02 2024/08/01 Report No.: CTA24042900104 Page 7 of 14 EMI Test Receiver R&S ESPI EMI Test Receiver R&S ESCI Spectrum Analyzer Agilent N9020A Spectrum Analyzer R&S Vector Signal generator Analog Signal Generator Universal Radio Communication Temperature and humidity meter Ultra-Broadband Antenna Horn Antenna Loop Antenna Horn Antenna Agilent R&S CMW500 Chigo Schwarzbeck Schwarzbeck Zhinan Beijing Hangwei Dayang Amplifier Schwarzbeck FSP N5182A SML03 R&S ZG-7020 VULB9163 BBHA 9120D ZN30900C OBH100400 BBV 9745 Amplifier Taiwan chengyi EMC051845B Directional coupler NARDA 4226-10 High-Pass Filter XingBo XBLBQ-GTA18 High-Pass Filter Automated filter bank Power Sensor XingBo Tonscend Agilent XBLBQ-GTA27 JS0806-F U2021XA Amplifier Schwarzbeck BBV9719 CTA-307 CTA-306 CTA-301 CTA-337 CTA-305 CTA-304 CTA-302 CTA-326 CTA-310 CTA-309 CTA-311 CTA-336 CTA-312 CTA-313 CTA-303 CTA-402 CTA-403 CTA-404 CTA-405 CTA-406 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/10/17 2023/10/13 2023/10/17 2024/10/16 2024/10/12 2024/10/16 2021/08/07 2024/08/06 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 Test Equipment Manufacturer EMI Test Software EMI Test Software Tonscend Tonscend RF Test Software RF Test Software Tonscend Tonscend Model No. TS®JS32-RE TS®JS32-CE TS®JS1120-3 TS®JS1120 Version number 5.0.0.2 5.0.0.1 3.1.65 3.1.46 Calibration Date N/A Calibration Due Date N/A N/A N/A N/A N/A N/A N/A 2.5 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for filing to comply with of the FCC Part 27 Rules. 2.6 Modifications No modifications were implemented to meet testing criteria. Report No.: CTA24042900104 Page 8 of 14 3 TEST CONDITIONS AND RESULTS 3.1 Output Power LIMIT According to § 22.913(a) specifies " The ERP of mobile transmitters and auxiliary test transmitters must not exceed 7 Watts." TEST CONFIGURATION Conducted Power Measurement Radiated Power Measurement: TEST PROCEDURE Radiated Power Measurement: a) The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider. b) The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to thefrequency of the transmitter c) The output of the test antenna shall be connected to the measuring receiver. d) The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency of the transmitter under test. e) The test antenna shall be raised and lowered through the specified range of height until a maximum signal level is detected by the measuring receiver. f) The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum signal level is detected by the measuring receiver. g) The test antenna shall be raised and lowered again through the specified range of height until a maximum signal level is detected by the measuring receiver. h) The maximum signal level detected by the measuring receiver shall be noted. i) The transmitter shall be replaced by a substitution antenna. j) The substitution antenna shall be orientated for vertical polarization and the length of the substitution antenna shall be adjusted to correspond to the frequency of the transmitter. Report No.: CTA24042900104 Page 9 of 14 k) The substitution antenna shall be connected to a calibrated signal generator. l) If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver. m) The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received. n) The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o) The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p) The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q) Test site anechoic chamber refer to ANSI C63.4. TEST RESULTS Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 5; recorded worst case for each Channel Bandwidth of LTE FDD Band 5. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) LTE FDD Band 5_Channel Bandwidth 1.4MHz_QPSK Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 824.7 -17.74 2.42 8.45 2.15 36.82 836.5 -18.00 2.46 8.45 2.15 36.82 848.3 -17.44 2.53 8.36 2.15 36.82 ERP (dBm) 22.96 22.66 23.06 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -15.49 -15.79 -15.39 Polarization V V V LTE FDD Band 5_Channel Bandwidth 3MHz_QPSK Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 825.5 -17.02 2.42 8.45 2.15 36.82 836.5 -18.80 2.46 8.45 2.15 36.82 847.5 -18.26 2.53 8.36 2.15 36.82 ERP (dBm) 23.68 21.86 22.24 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -14.77 -16.59 -16.21 Polarization V V V LTE FDD Band 5_Channel Bandwidth 5MHz_QPSK Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 826.5 -17.63 2.42 8.45 2.15 36.82 836.5 -18.57 2.46 8.45 2.15 36.82 846.5 -17.92 2.53 8.36 2.15 36.82 ERP (dBm) 23.07 22.09 22.58 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -15.38 -16.36 -15.87 Polarization V V V LTE FDD Band 5_Channel Bandwidth 10MHz_QPSK Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 829.0 -17.77 2.42 8.45 2.15 36.82 836.5 -18.36 2.46 8.45 2.15 36.82 844.0 -17.55 2.53 8.36 2.15 36.82 ERP (dBm) 22.93 22.30 22.95 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -15.52 -16.15 -15.50 Polarization V V V Report No.: CTA24042900104 Page 10 of 14 LTE FDD Band 5_Channel Bandwidth 1.4MHz_16QAM Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 824.7 -18.54 2.42 8.45 2.15 36.82 836.5 -18.89 2.46 8.45 2.15 36.82 848.3 -19.16 2.53 8.36 2.15 36.82 ERP (dBm) 22.16 21.77 21.34 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -16.29 -16.68 -17.11 Polarization V V V LTE FDD Band 5_Channel Bandwidth 3MHz_16QAM Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 825.5 -19.60 2.42 8.45 2.15 36.82 836.5 -19.65 2.46 8.45 2.15 36.82 847.5 -19.46 2.53 8.36 2.15 36.82 ERP (dBm) 21.10 21.01 21.04 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -17.35 -17.44 -17.41 Polarization V V V LTE FDD Band 5_Channel Bandwidth 5MHz_16QAM Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 826.5 -19.04 2.42 8.45 2.15 36.82 836.5 -18.88 2.46 8.45 2.15 36.82 846.5 -19.40 2.53 8.36 2.15 36.82 ERP (dBm) 21.66 21.78 21.10 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -16.79 -16.67 -17.35 Polarization V V V LTE FDD Band 5_Channel Bandwidth 10MHz_16QAM Frequency (MHz) PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) Correction (dB) PAg (dB) 829.0 -19.18 2.42 8.45 2.15 36.82 836.5 -19.98 2.46 8.45 2.15 36.82 844.0 -19.93 2.53 8.36 2.15 36.82 ERP (dBm) 21.52 20.68 20.57 Limit (dBm) 38.45 38.45 38.45 Margin (dB) -16.93 -17.77 -17.88 Polarization V V V Report No.: CTA24042900104 Page 11 of 14 3.2 Spurious Emission LIMIT According to Part §22.917 specify that the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log (P) dB. The specification that emissions shall be attenuated below the transmitter power (P) by at least 43 + 10 log (P) dB, translates in the relevant power range (1 to 0.001 W) to -13 dBm. At 1 W the specified minimum attenuation becomes 43 dB and relative to a 30 dBm (1 W) carrier becomes a limit of -13 dBm. At 0.001 W (0 dBm) the minimum attenuation is 13 dB, which again yields a limit of -13 dBm. In this way a translation of the specification from relative to absolute terms is carried out. TEST CONFIGURATION Conducted Spurious Measurement: Radiated Spurious Measurement: TEST PROCEDURE Report No.: CTA24042900104 Page 12 of 14 Radiated Spurious Measurement: a. The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider. b. The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to the frequency of the transmitter c. The output of the test antenna shall be connected to the measuring receiver. d. The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency of the transmitter under test. e. The test antenna shall be raised and lowered through the specified range of height until a maximum signal level is detected by the measuring receiver. f. The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum signal level is detected by the measuring receiver. g. The test antenna shall be raised and lowered again through the specified range of height until a maximum signal level is detected by the measuring receiver. h. The maximum signal level detected by the measuring receiver shall be noted. i. The transmitter shall be replaced by a substitution antenna. j. The substitution antenna shall be orientated for vertical polarization and the length of the substitution antenna shall be adjusted to correspond to the frequency of the transmitter. k. The substitution antenna shall be connected to a calibrated signal generator. l. If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver. m. The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received. n. The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o. The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p. The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q. The resolution bandwidth of the spectrum analyzer was set at 100 kHz for Part 22 and 1MHz for Part 24. The frequency range was checked up to 10th harmonic. r. Test site anechoic chamber refer to ANSI C63. TEST RESULTS Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 5; LTE FDD Band 5_Channel Bandwidth 10MHz_QPSK_ Low Channel Frequency PMea (MHz) (dBm) Pcl (dB) Ga Diatance Antenna Gain(dB) Peak EIRP (dBm) Limit (dBm) 1658.0 -43.19 3.00 3.00 9.58 -36.61 -13.00 2487.0 -51.92 3.03 3.00 10.72 -44.23 -13.00 1658.0 -40.36 3.00 3.00 9.68 -33.68 -13.00 2487.0 -51.86 3.03 3.00 10.72 -44.17 -13.00 Margin (dB) -23.61 -31.23 -20.68 -31.17 Polarization H H V V Report No.: CTA24042900104 Page 13 of 14 LTE FDD Band 5_Channel Bandwidth 10MHz_QPSK_ Middle Channel Frequency PMea (MHz) (dBm) Pcl (dB) Ga Diatance Antenna Gain(dB) EIRP (dBm) Limit (dBm) 1673.0 -41.61 3.00 3.00 9.61 -35.00 -13.00 2509.5 -46.76 3.03 3.00 10.77 -39.02 -13.00 1673.0 -44.71 3.00 3.00 9.61 -38.10 -13.00 2509.5 -54.64 3.03 3.00 10.77 -46.90 -13.00 Margin (dB) -22.00 -26.02 -25.10 -33.90 Polarization H H V V LTE FDD Band 5_Channel Bandwidth 10MHz_QPSK_ High Channel Frequency PMea (MHz) (dBm) Pcl (dB) Ga Distance Antenna Gain(dB) EIRP (dBm) Limit (dBm) 1688.0 -45.12 3.00 3.00 9.77 -38.35 -13.00 2532.0 -51.54 3.03 3.00 10.89 -43.68 -13.00 1688.0 -42.36 3.00 3.00 9.77 -35.59 -13.00 2532.0 -49.34 3.03 3.00 10.89 -41.48 -13.00 Notes: 1.All channel bandwidth were tested,the report recorded the worst data. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) 3. ERP = EIRP 2.15dBi as EIRP by subtracting the gain of the dipole. 4. Margin = EIRP Limit 5. We measured all modes and only recorded the worst case. Margin (dB) -25.35 -30.68 -22.59 -28.48 Polarization H H V V Report No.: CTA24042900104 4 Test Setup Photos of the EUT Page 14 of 14 5 Photos of the EUT Reference to the test report No. CTA24042900101 ********************** End of Report **********************
Related FCC IDs:
- 2AVFN-FT205L - Leax Arkivator Telecom USA Inc. Industrial 4G Router [-FT205L] Microsoft Word 2016 Microsoft Word 2016