Bekijk de CE-markering
Braytron ADVANCE- Led Bulb Lichtbron - LED Lamp - E27 Fitting - 12W - A60-4000K Wit licht | bol.com
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 14 Pages, 196.68KB
Document DEVICE REPORToriginalBST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069003SR BRAYTRON S.R.L Prepared For : Product Name: LVD REPORT BRAYTRON S.R.L B.DUL IULIU MANIU, NR.616, CORP B, ETAJ 1 SECTOR 6, 061129,BUCHAREST,ROMANIA LED BULB Trade Name: BRAYTRON Main Test Model: BA13-25023 Additional Model: See Annex B Prepared By : Test Date: BST Testing (Shenzhen)Co., Ltd No.7, New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Dec.23, 2021Dec.30, 2021 Date of Report: Dec.30, 2021 Report No.: BSTXD211221069003SR Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 1 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR TEST REPORT EN 62560 Self-ballasted LED-lamps for general lighting services by voltage > 50 V Safety specifications Testing Laboratory Name ..................:BST Testing(Shenzhen)Co., Ltd Address ................................................ :GNou.a7n,gNdeowngE, rCahInindaustrial Zone, Guantian, Bao'an District, Shenzhen, Testing location............................: BST Testing(Shenzhen)Co., Ltd Applicant's Name ................................ :BRAYTRON S.R.L Address ................................................ :B06.D1U12L9I,UBLUICUHMAARNEISUT, ,NRRO.6M1A6N, ICAORP B, ETAJ 1 SECTOR 6, Manufacturer ............ ...............: DEMGRUP INTERNATIONAL LIGHTING LIMITED Address .................. ...............: UNIT D 16/F, ONE CAPITAL PLACE, 18 LUARD ROAD, WAN CHAI, HONG KONG Test specification N/A Standard................................................:EN 62560:2012/A11:2019 Procedure deviation ........................... :N/A Non-standard test method .................:N/A Test item description .......................... :See page 1 Trade Name..........................................:See page 1 Model and/or type reference .............:See page 1 Rating(s)................................................:See label Test case verdicts: Test case does not apply to the test object ... : N(/A) Test item does meet the requirement ............. : P(ass) Test item does not meet the requirement ...... : F(ail) Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 2 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069003SR General remarks: This report shall not be reproduced except in full without the written approval of the testing laboratory. The test results presented in this report relate only to the item(s) tested. "(see remark #)" refers to a remark appended to the report. "(see Annex #)" refers to an annex appended to the report. General product information: The series products have the same LED modules. The differences are the Luminaires model name and power, so, we select BA13-25023 to test. Artwork of Marking Label: Prepared by : Reviewer : Approved & Authorized Signer : Engineer Supervisor Manager Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 3 of 14 Clause 4 4.1 4.2 4.3 4.4 5 5.1 5.2 5.3 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069003SR Requirement + Test EN 62560 Result - Remark Verdict General requirements and general test requirements P The lamps shall be so designed and constructed P that in normal use they function reliably and cause no danger to the user or surroundings. Self-ballasted LED-lamps are non-repairable, P factory-sealed units. They shall normally not be opened for any tests. In the case of doubt based on the inspection of the lamp and the examination of the circuit diagram, and in agreement with the manufacturer or responsible vendor, either the output terminals shall be short-circuited or, in agreement with the manufacturer, lamps specially prepared so that a fault condition can be simulated shall be submitted for testing (see Clause 13). all tests are carried out on each type of lamp or, P where a range of similar lamps is involved, for each wattage in the range or on a representative selection from the range, as agreed with the manufacturer. When the lamp fails safely during one of the tests, it P is replaced, provided that no fire, smoke or flammable gas is produced. Further requirements on failing safe are given in Clause 12. Marking P Lamps shall be clearly and durably marked with the P following mandatory markings: a) mark of origin (this may take the form of a see page 3 P trademark, the manufacturer's name or the name of the responsible vendor); b) rated voltage or voltage range (marked "V" or 220-240V~ P "volts"); c) rated wattage (marked "W" or "watts"); P d) rated frequency (marked in "Hz"). 50/60Hz P Addition marking P - rated current (A).......................................................... : P - weight significantly higher N - special conditions or restrictions P Not suitable for dimming; symbol P used - not suitable for water contact N Marking durable and legible P Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 4 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR rubbing 15 s water, 15 s petroleum; marking legible P 6 INTERCHANGEABILITY P 6.1 Cap interchangeability in accordance with IEC 60061-1 P Gauge in accordance with IEC 60061-3 P 6.2 Bending moment and mass imparted by the lamp at the lampholder P Bending moment imparted by the lamp at the 2Nm P lampholder (Nm).......................................................... : Mass not exceeding value table 2 or as specified in P IEC 60061-1 (kg)...........................................................: 7 8 8.1 8.2 8.3 9 9.1 9.2 9.2.1 9.3 9.4 Protection against accidental contact with live parts P Internal, basic insulated or live metal parts not P accessible Tested with a test finger with a force of 10 N P Compliance checked with appropriate gauges P Insulation resistance and electric strength after humidity treatment P General P Insulation resistance P Electric strength P Mechanical strength P Lamps shall be able to withstand the relevant mechanical strength tests as given in P 9.2. Torsion resistance of unused lamps P Torque test P B15d or E14 Cap............................................ 1,15 Nm N B22d, E26, E26d or GX53 Cap.......................3,0 Nm P E11 or E12 Cap.................................................0,8 Nm N E17 Cap.............................................................1,5 Nm N E39 or E40 Cap.................................................5,0 Nm N GX53 Cap..........................................................3,0 Nm N Compliance criteria P Clause 8 shall comply after the mechanical P strength test. Axial strength of Edison caps P After full insertion into the gauge an axial force of 120N P Table 4 is applied to the central contact (N)............: Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 5 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR The insulation around the central contact shall P remain intact 10 Cap temperature rise P The cap temperature rise ts of the lamp shall not 60.5K, limit 120K P exceed 120 K. 11 Resistance to heat. P Parts of insulating material providing protection P against electric shock, retaining live parts in position, ball-pressure test: 12 Resistance to flame and ignition P External parts of insulating material preventing P electric shock glow-wire test 650 C 13 Fault conditions P 13.2 Fault conditions: where diagram indicates fault P condition impairs safety, electronic components have been short-circuited or disconnected 13.3 When operated under fault conditions the lamp P - does not emit flames or molten material P - does not produce flammable gases or smoke P - live parts not accessible P After the tests the insulation resistance with d.c. P 1000 V complies with requirements of Cl. 8.1 : 14 Creepage distances and clearances P Creepage distances and clearances according to Cr.>5.0mm, Cl. >5.0mm P IEC 61347-1 Conductive accessible parts according to IEC P 60598-1 15 Abnormal operation P Non-dimmable self-ballasted lamps are tested on a P dimmer or an electronic switch according the test circuit shown in Figure 8 Operate the lamp for 8 h at most onerous dimming P level When operated under abnormal operation the lamp P - does not catch fire P - does not produce flammable gases P - live parts not accessible P Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 6 of 14 16 17 17.1 17.2 17.3 18 18.1 18.2 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR Test conditions for dimmable lamps N Test are carried out at maximum power setting for N Clause 10 and Clause 17 Photobiological safety P UV radiation P The ultraviolet hazard efficacy of luminous radiation P of an LED lamp shall not exceed 2 mW/klm. Blue light hazard P The blue light hazard shall be assessed according RG0 P to IEC TR 62778, which shall be regarded as normative when testing LED lamps to this standard. LED lamps shall be classified as risk group 0 unlimited or risk group 1 unlimited. Infrared radiation P LED lamps are not expected to reach a level of P infrared radiation where marking or other safety measurements are required. INGRESS PROTECTION N Lamps shall be suitable for water contact unless N marked with Figure 6 The lamp is subjected to an IPX4 test according to N IEC 60598-1 The lamp complies with the compliance provisions N of 9.2 of IEC 60598-1 Lamps constructed so that it is sealed to exclude N water need not to be tested Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 7 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR ANNEX 1 Components Object / part Manufacture No. r/trademark Type / model Technical data Internal wiring (input) Internal wiring (input) Connector Connector Connector TONGXIANG CITY LI'AO CABLE CO LTD TONGXIAN G ZHOUQUA NHONGKE ELECTRIC FACTORY XIAMEN GHGM INDUSTRIAL TRADE CO LTD PUTIAN HANJIAN G FUCON ELECTRONIC S CO LTD WENZHOU JKUN CONNECTO RCO LTD 1007 80;300V 1007 80;300V GL2C002SFR 130;V-0 CM-20281-02P CM-2028-202P CM-2027 130;V-0 A2002AWR- 130;V-0 02 Connector DONGGUAN SOLEPIN ELECTRONIC SCO LTD 100802MSN01 130;V-0 Fuse resister SHENZHEN GREAT ELECTRONIC SCO LTD RXF-1W Series 2W/10R Fuse resister Fuse resister HUAIAN LINGJIE TECHNOLOG Y DEVELOPIN G CO LTD CHANGZHO U WUJIN HUAYU ELECTRONIC SCO LTD Type RF10 Series RXF1WS 2W/10R 2W/10R Standard IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011, AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 P Mark(s) of conformity1) Tested with appliance UL/ E479070 Tested with appliance UL/ E365749 Tested with appliance UL/ E360430 Tested with appliance UL/ E467583 Tested with appliance UL/ E473017 Tested with appliance UL/ E506639 Tested with appliance UL/ E301541 Tested with appliance UL/ E249662 Tested with appliance UL/ E479825 Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 8 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR Heat shrinkable sleeve Heat shrinkable sleeve Heat shrinkable sleeve Varistor Varistor Enclosure Enclosure LED LED PCB of LED module SHENZHEN WOER HEATSHRINKABL E MATERIAL COLTD RSFR-H 600V;VW-1;125 DONGGUAN SALIPT CO LTD SHENZHEN WOLIDA TRADING COLTD SALIPT S901-600 RSFR-H 600V;VW-1;125 600V;VW-1;125 Hongzhi Enterprises HEL10D511K RMS300V Ltd. Shantou High- New Technology 10D511K RMS300V Dev. Zone Songtian Enterprise Co., Ltd. NANTONG ORIENT PLASTICS COLTD 3080 G(zz) V-0;130 JINYOUNG (XIAMEN) ADVANCED MATERIALS TECHNOLOG YCO LTD TG30WX V-0;130 Bridgelux COLTD 2835 9V 100mA Seoul Semiconduct orCo LTD 2835 JIANGXI TIANYI CIRCUITS SCIENCE AND TECHNOLOG Y CO LTD TY-003 9V 100mA 0,21mm;130 V-0 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E203950 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E209436 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E329530 IEC/EN 61051- VDE 40037512 1 IEC/EN 61051- VDE 40023049 1 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E332375 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E475922 Tested withappliance Tested withappliance Tested with appliance UL/ E496359 Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 9 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR PCB of LED module JINGDEZHE N HONGYI ELECTRONIC SCO LTD PCB of LED module PCB of LED module Hubei ZhongPei Electronics Technology Co.,Ltd QUZHOU TIANYING ELECTRONIC SCO LTD PCB of LED module LONGXING ELECTRONIC MATERIALS COLTD LED cover MITSUBISHI ENGINEERIN G-PLASTICS CORP LED cover NANTONG ORIENT PLASTICS COLTD Plastic on the KINGFA SCI Lamp cap &TECH CO LTD HY-1 ZP-2 0,18mm;130 V-0 0,28mm;130 V-0 TY-F02 LX-L 0,2mm;130 V0 V-0130 S-2000+(f1) V-2;80 HYB-PCR-G1 GWFI 650 PBTRG301(r1 ) V-0;125 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 IEC 62560:2011 , AMD1:2015 Tested with appliance UL/ E348413 Tested with appliance UL/ E481795 Tested with appliance UL/ E482814 Tested with appliance UL/ E500854 Tested withappliance UL/ E41179 Tested withappliance Tested withappliance Annex 2 (normative) Lamps with operating position limitations (see 5.2) N Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 10 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR Table 8.2 Test comments Title: Insulating resistance Location Between And L N Live parts Enclosure P Insulation resistance (M) >100M >100M Table 8.3 Test comments Title: Electric strength Location Between And Live parts Live parts Enclosure Mounting surface Test voltage 3000V 3000V Table 11 Test comments Parts Enclosure Title: Ball pressure Test temp. () 75 Impression diameter (mm) 0.92 P Breakdown No No Results P Limits (mm) 2 Table 12 Test comments Parts Shade Enclosure Title: Glow wire test Test temp. () 650 650 P Results Any flame or glowing extinguish within 30s Any flame or glowing extinguish within 30s Table 13 Part C1 Output Simulated fault Short-circuit Short-circuit TABLE: tests of fault conditions Test voltage 242V 242V P Hazard No No Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 11 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR ANNEX A: Photo-documentation Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 12 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR EUT EUT Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 13 of 14 BST Testing(Shenzhen)Co., Ltd. Report No.: BSTXD211221069001SR Annex B Additional Model : BA05-X03XX, BA05-X04XX, BA05-X05XX, BA05-X06XX, BA05-X07XX, BA05-X08XX, BA06-X03XX, BA06-X04XX, BA06-X05XX, BA06-X06XX, BA06-X07XX, BA06-X08XX, BA07-X03XX, BA07-X04XX, BA07-X05XX, BA07-X06XX, BA07-X07XX, BA07-X08XX, BA08-X03XX, BA08-X04XX, BA08-X05XX, BA08-X06XX, BA08-X07XX, BA08-X08XX, BA09-X03XX, BA09-X04XX, BA09-X05XX, BA09-X06XX, BA09-X07XX, BA09-X08XX, BA10-X03XX, BA10-X04XX, BA10-X05XX, BA10-X06XX, BA10-X07XX, BA10-X08XX, BA11-X03XX, BA11-X04XX, BA11-X05XX, BA11-X06XX, BA11-X07XX, BA11-X08XX, BA12-X05XX, BA12-X06XX, BA12-X07XX, BA12-X08XX, BA12-X09XX, BA12-X10XX, BA12-X11XX, BA12-X12XX, BA12-X13XX, BA12-X14XX, BA12-X15XX, BA12-X16XX, BA12-X17XX, BA12-X18XX, BA13-X05XX, BA13-X06XX, BA13-X07XX, BA13-X08XX, BA13-X09XX, BA13-X10XX, BA13-X11XX, BA13-X12XX, BA13-X13XX, BA13-X14XX, BA13-X15XX, BA13-X16XX, BA13-X17XX, BA13-X18XX, BA13-X20XX, BA13-X24XX, BA13-X25XX, BA13-X28XX, BA13-X30XX, BA13-X35XX, BA13-X38XX, BA13-X40XX, BA13-X45XX, BA13-X48XX, BA13-X50XX, BA13-X60XX, BA14-X05XX, BA14-X06XX, BA14-X07XX, BA14-X08XX, BA14-X09XX, BA14-X10XX, BA14-X11XX, BA14-X12XX, BA14-X13XX, BA14-X14XX, BA14-X15XX, BA14-X16XX, BA14-X17XX, BA14-X18XX, BA14-X20XX, BA14-X24XX, BA14-X25XX, BA14-X28XX, BA14-X30XX, BA14-X35XX, BA14-X38XX, BA14-X40XX, BA14-X45XX, BA14-X48XX, BA14-X50XX, BA14-X60XX, BA15-X05XX, BA15-X06XX, BA15-X07XX, BA15-X08XX, BA15-X09XX, BA15-X10XX, BA15-X11XX, BA15-X12XX, BA15-X13XX, BA15-X14XX, BA15-X15XX, BA15-X16XX, BA15-X17XX, BA15-X18XX, BA15-X20XX, BA15-X24XX, BA15-X25XX, BA15-X28XX, BA15-X30XX, BA15-X35XX, BA15-X38XX, BA15-X40XX, BA15-X45XX, BA15-X48XX, BA15-X50XX, BA15-X60XX, BA16-X05XX, BA16-X06XX, BA16-X07XX, BA16-X08XX, BA16-X09XX, BA16-X10XX, BA16-X11XX, BA16-X12XX, BA16-X13XX, BA16-X14XX, BA16-X15XX, BA16-X16XX, BA16-X17XX, BA16-X18XX, BA16-X20XX, BA16-X24XX, BA16-X25XX, BA16-X28XX, BA16-X30XX, BA16-X35XX, BA16-X38XX, BA16-X40XX, BA16-X45XX, BA16-X48XX, BA16-X50XX, BA16-X60XX, BA17-X03XX, BA17-X04XX, BA17-X05XX, BA17-X06XX, BA17-X07XX, BA17-X08XX, BA17-X09XX, BA17-X10XX, BA17-X11XX, BA17-X12XX, BA17-X13XX, BA17-X14XX, BA17-X15XX, BA17-X16XX, BA17-X17XX, BA17-X18XX, BA22-X03XX, BA22-X04XX, BA22-X05XX, BA22-X06XX, BA22-X07XX, BA22-X08XX, BA23-X03XX, BA23-X04XX, BA23-X05XX, BA23-X06XX, BA23-X07XX, BA23-X08XX, BA24-X03XX, BA24-X04XX, BA24-X05XX, BA24-X06XX, BA24-X07XX, BA24-X08XX, BA25-X03XX, BA25-X04XX, BA25-X05XX, BA25-X06XX, BA25-X07XX, BA25-X08XX, BA26-X03XX, BA26-X04XX, BA26-X05XX, BA26-X06XX, BA26-X07XX, BA26-X08XX, BA27-X03XX, BA27-X04XX, BA27-X05XX, BA27-X06XX, BA27-X07XX, BA27-X08XX, BA28-X03XX, BA28-X04XX, BA28-X05XX, BA28-X06XX, BA28-X07XX, BA28-X08XX, BA29-X02XX, BA29-X03XX, BA29-X04XX, BA29-X05XX, BA29-X06XX, BA29-X07XX, BA29-X08XX, BA30-X02XX, BA30-X03XX, BA30-X04XX, BA30-X05XX, BA30-X06XX, BA30-X07XX, BA30-X08XX, BA30-X09XX, BA30-X10XX, BA30-X11XX, BA30-X12XX, BA33-X10XX, BA33-X11XX, BA33-X12XX, BA33-X13XX, BA33-X14XX, BA33-X15XX, BA34-X05XX, BA34-X06XX, BA34-X07XX, BA34-X08XX, BA34-X09XX, BA34-X10XX, BA34-X11XX, BA34-X12XX, BA34-X13XX, BA34-X14XX, LC-0505, LC-0607 (X=0,1,2,3,4,5,6,7,8,9) Add: Add: No.7,New Era Industrial Zone, Guantian, Bao'an District, Shenzhen, Guangdong, China Certificate Search: http://www.bst-lab.com, Tel: 400-962-6168, E-mail:[email protected] Page 14 of 14