Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 623.14KB
Document DEVICE REPORTStiebel Instantaneous 3Phase Electric Water Heater DHB-E13Data Sheet DHB-E 13 AU 50°C Instantaneous 3 Phase Electric Water Heater Delivers hot water not exceeding 50°Celsius in accordance with AS3498* The advantages > Made in Germany > Designed for Australian conditions > Temperature selection up to a maximum of 50°Celsius in accordance with AS3498* > Rotary dial temperature selection from 30-50°Celsius > Bare wire element for fast and efficient water heating > Suitable for hard and soft water areas > No flue, ventilation or safe tray required > Electronically controlled to accurately regulate the water temperature output > Electronic safety system with air detection > Suitable for single or multi-point applications > Compact design for space saving installation flexibility > Multiple electrical access points for installation ease > Available in electrical size: > 14.5kW, 20 Amps per phase, 3 phase 415V > WaterMark approved, licence number WMKA00301, AS3498 3i 3 TIMES THE INTELLIGENCE ELECTRONICALLY CONTROLLED 3i Technology Comfort E ency PREMIUM 50°C PLEASE NOTE: The DHB-E 13 AU 50°C is a 50°C instantaneous 3 phase electric hot water system if you require a 60°Celsius version please select the DHB-E 13 60°C instantaneous 3 phase electric hot water system. Ideal installation areas** > Bathroom > Factory bathroom or sink > Kitchenette For more information on the right Stiebel Eltron water heater for your project please contact our Technical Services Department on free call 1800 153 351 (Australia). *This appliance delivers hot water not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4, local requirements and installation instructions to determine if additional delivery temperature control is required. If your application requires a Thermostatic Mixing Valve (TMV) we recommend using the STIEBEL ELTRON DHB-E 13 60°C model which can heat water to 60°Celsius and work well with TMVs. The DHB-E 13 AU is not suitable for operation with a TMV. **Dependent on model selected Free Call 1800 153 351 | www.stiebel.com.au 01 | 02 Data Sheet DHB-E 13 AU AUG 2015 Data Sheet DHB-E 13 AU 50°C Instantaneous 3 Phase Electric Water Heater Delivers hot water not exceeding 50°Celsius in accordance with AS3498* Model number Rated output (415V) Rated current (415V) Phases Electrical installation Installation requirements Switch on flow rate Permissible operating pressure Temperature adjustment IP Rating Height Width Depth Weight (filled with water) Colour Nominal capacity Flow rate limiter (if fitted) L/min Approvals Equipment For one/several draw off points Heating system Electronic flow rate control Electronic air detection system Accepts pre-heated water (solar) Programmable temperature Wellness shower programs ECO energy & water function Optional accessories Radio remote control primary Radio remote control secondary 3 PHASE ELECTRIC DHB-E 13 AU 50°C 14.5kW 20 Amp 3/PE As per AS/NZS3000 AS/NZS3500.4.2 & local requirements 3.0 L/min 1000 kPa 30°C-50°C IP25 478 mm 225 mm 105 mm 4.0 kg white 0.4L 7.5 (blue) WaterMark Lic No. WMKA00301. AS3498 Yes / Yes Bare wire Yes - - Selecting the right Stiebel Eltron instantaneous water heater Thank you for considering the Stiebel Eltron instantaneous water heater, with over 90 years of hot water technology experience we are sure you will be happy with your choice of a Stiebel Eltron instantaneous water heater. The temperature rise table will assist you in determining the appropriate size of instantaneous water heater required for your application. The required temperatures at specific flow rates will determine the size of system needed. Our customer support representatives can be contacted on our free call number 1800 153 351 to assist in selecting the appropriate system/systems for your project. Installation close to the point of use The Stiebel Eltron DHB-E 13A 50°C instant water heaters compact design allows for ease of installation close to the point of use. In order to minimise thermal losses in the pipe work the water heater should be installed as close to the point of use as possible. Electrical installation This water heater must be installed in accordance with AS/NZS3000 electrical regulations by a qualified installer. Plumbing installation This water heater must be installed in accordance with AS/NZS3500.4.2 and local authority regulations by a qualified installer. Warranty For full warranty information please visit www.stiebel.com.au. Technical Support Stiebel Eltron (Aust) Pty Ltd Free Call (Australia): 1800 153 351 Telephone: (03) 9645 1833 Website: stiebel.com.au Temperature rise chart^ DHB-E 13 AU 50°C DHB-E 13 AU 50°C instantaneous 3 phase electric water heater 225 20 105 140 Add the below temperature to the cold water inlet temperature. 4L/min - 47 20 325 478 414 368 6L/min 34°C* 330 44 50 8L/min 26°C* 10L/min 21°C* 30 72 12L/min 17°C* 44 9.5 14L/min 15°C* ^Please note temperature rise is based on connection to 415V 165 100 Hot water outlet Cold water inlet *This appliance delivers hot water not exceeding 50°Celsius in accordance with AS3498. Refer to AS/NZS3500.4, local requirements and installation instructions to determine if additional delivery temperature control is required. 35 338 mm 35 114 STIEBEL ELTRON is committed to our policy of continual improvement, some features may have subsequently been changed or even removed. Our advisors will be happy to consult with you regarding the currently applicable equipment features. The images used in this brochure are for reference only. Free Call 1800 153 351 | www.stiebel.com.au 01 | 02 Data Sheet DHB-E 13 AU AUG 2015Adobe InDesign CS5.5 (7.5.3) Adobe PDF Library 9.9