Click to View
Panduit FRRASC6LYL | FiberRunner Split Cover, Horizontal Rig
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 1.03MB
Document DEVICE REPORTPanduit-FRCR6LBL-X-FIBERRUNNER-CABLE-RETAINER-6-X-4-Specification-Sheets7FiberRunnerTMLSZH 6x4 Routing System EMEA S PSE PC EI FCIICFAI TCIAOTNI OSNH ESEHTE E T specifications The 6x4 routing system shall be a system of channel, fittings, and brackets designed to segregate, route, and protect fiber optic and high performance copper cabling. Channel and fittings shall be assembled using pre-assembled couplers. A selection of spillout options shall be available that easily attach using the vertical tee. Fittings maintain a minimum 2" bend radius to protect against signal loss due to excessive cable bends. Available system colours shall be yellow and black. A full complement of brackets shall be available for attaching system components to ladder rack, threaded rod, auxiliary framing, strut, equipment racks and raised floor pedestals. technical information Dimensions are in inches (Dimensions in parentheses are metric) 4.4 (112.83) A = 23.6 in.2 (15354mm2) Open channel 50% fill capacity: (4" pile up) Fiber Optic Ribbon Interconnect Category 6 Category 6A Material: Flammability: Approvals: CSI Spec Form: Cable 1.6mm 2.0mm 3.0mm 6.58 (167.3) No. of Cables 3,819 2,444 1,086 5.20mm 361 6.35mm 242 7.57mm 171 LSZH PC(Channel), LSZH PC/ABS (Fittings) 94V-0 UL Listed to 2024 Optical Fiber Cable Routing Assemblies LP-CSISPEC-FR key features Fastest installations Easy to maintain System strength Versatility Cable protection and benefits No bolts need to be tightened and no tools are required when installing the QuikLockTM Coupler; QuikLockTM Couplers and Brackets take less than five seconds to make a mechanically secure connection Hinged channel cover installs easily and fully encloses the channel for cable protection; split hinged channel cover creates radiused 3/4" (19mm) opening for easy access to add or remove cables; the 6x4 hinged and split hinged channel covers will stay open between 30° and 90° to allow cable access even in height restricted areas Split fitting covers allow cable to be laid in without removing the fitting cover; the covers are also designed to prevent cables from coming out of the channel as cable is pulled through Hinged channel covers and split fitting covers protect cabling and provide fast and easy access for future cabling moves, adds, and changes Robust system of channel, covers, fittings, and other non-metallic system components, protect cable from physical damage; system includes full range of directional and spillout fittings Multiple spillout options include spill-over fittings and the vertical tee which accepts a 3-sided trumpet, transition to corrugated tubing and PanduitTM FiberRunnerTM System A minimum 2" bend radius maintained throughout all fittings prevents excessive bends in fiber optic cabling applications The FiberRunnerTM 6x4 Routing System is a system of channel, fittings, and brackets designed to segregate, route, and protect fiber optic and high performance copper cabling. It is suited for data center applications where cable is routed from distribution areas to equipment cabinets or racks. It is used in Telco Central Offices to route fiber optic jumper cables between fiber distribution frames and equipment bays. It can be deployed over the racks or in approved underfloor applications. Channel and fittings are assembled using timesaving PanduitTM QuikLockTM Couplers. A selection of spillout options is available that easily attach using the vertical tee. Fittings maintain a 2" bend radius to protect against signal loss due to excessive cable bends. Available system colours are yellow and black to differentiate various types of cabling. A full complement of QuikLockTM Brackets is available to attach system components to support structures found in all applications. The FiberRunnerTM 6x4 Routing System is part of the PanduitTM complete fiber distribution system, which includes the FiberRunnerTM 24x4, 12x4, 4x4, and 2x2 Routing Systems, Wyr-GridTM Overhead Cable Tray System, cable management, and racks. www.panduit.com Channel and Cover 6x4 channel (2 Meter): 6x4 hinged cover (2 Meter): 6x4 split hinged cover (2 Meter): Cable retainer: FR6X4L**2 FRHC6L**2 FRSHC6L**2 FRCR6LBL-X Fittings, Split Covers, and Spillouts QuikLockTM Coupler: FRBC6X4L** Horizontal right angle: FRRA6X4L** Horizontal right angle cover: FRRASC6L** Horizontal 45°: FRH456X4L** Horizontal 45° cover: FRH45SC6L** Horizontal tee: FRT6X4L** Horizontal tee cover: FRTSC6L** 4-way cross: FRFWC6X4L** 4-way cross cover: FRFWCSC6L** End cap: FREC6X4L** Inside vertical 90° FRIVRA6X4L** Inside vertical 45°: FRIV456X4L** Outside vertical 45°: FROV456X4L** Outside vertical 45° cover: FROV45SC6** Outside vertical 90°: FROVRA6X4L** Outside vertical 90° cover: FROVRASC6L** 6x4 to 4x4 FiberRunner TM Reducer Fitting: 6x4 to 4x4 FiberRunnerTM Reducer Fitting Cover: 6x4 FiberRunnerTM System to 4x4 Fiber-Duct TM Reducer Fitting: Adapter to CommScope 6x4 FiberGuide1: Adapter to Tyton 8x4 Lightguide2: FRRF6FR4L** FRRF6FR4SCL** FRRF64L** FRADC6X4L** FRTYT68 Adapter to Warren & Brown 8x4 Lightpaths3: QuikLockTM Vertical Tee: FRWBS68 FRVT6X4L** 3-sided vertical tee trumpet spillout: 2-port spillout to 1.5" I.D. corrugated tubing: 4x4 hinged duct vertical cable manager kit: Low profile reducer 4x4 to 2x2 for vertical tee: Spill-over with 2x2 exit: FTR4X4L** FIDT4X4LBL FRHD4KT** FRLPR42LBL FRSPJ2X2L** Spill-over cover with 2x2 exit for 6x4 system: 2x2 3-sided trumpet: FRSPJC26L** FTR2X2L** Dual downspout: FRDDS6X4L** Dual downspout cover: FRDDSHC6L** 4x4 3-sided trumpet: FRTR4X4L** 2-port spillout to 1.5" I.D. corrugated tubing: 1-port spillout to 1.5" I.D. corrugated tubing: 3-sided BRC trumpet spillout for 6x4 exit: 6x4 up spout: FRIDT4X4L** FR1.5IDEL** FRTR6X4L** FRUPS6X4L** Innerduct transition fitting: FITF6X4 Corrugated tubing spillout: FRIDT6X4L** QuikLockTM Mounting Brackets: QL existing 1/2" thr rod bracket: FR6TRBE12 QL existing 5/8" thr rod bracket: FR6TRBE58 QL new 1/2" thr rod bracket: FR6TRBN12 QL new 5/8" thr rod bracket: FR6TRBN58 QL underfloor bracket: FR6USB QL adjust ladder rack bracket: FR6ALB QL center support bracket 1/2": FR6CS12 QL center support bracket 5/8": FR6CS58 QL adjust C-bracket 1/2": FR6ACB12 QL adjust C-bracket 5/8": FR6ACB58 QL trapeze 3/8" bracket: FR6TB38 QL trapeze 1/2" bracket: FR6TB12 Two-piece ladder rack bracket 1/2" thr rod: F2PCLB12 Two-piece ladder rack bracket 5/8" thr rod: F2PCLB58 QL ladder rack bracket: FR6LRB QL "L" wall mount bracket: FR6LB QL NetFrameTMRack Mount Bracket: FRRMBNF58 QL adjust cabinet mount bracket: FR6ACAB Two-piece framing clip 5/8" thr rod to 9/16" C-channel aux. framing bars: FRAFC58 4 post rack bracket: FR4PRB58 1 FiberGuide is a registered trademark of CommScope . 2 Lightguide Fiber Optic Protection System is a product of the Hellerman Tyton Corporation. 3 Lightpaths is a trademark of Warren & Brown Technologies Pty Ltd. **Substitute: YL= Yellow, BL= Black FiberRunnerTM 6x4 Routing System EMEA channel and cover FR6X4L**2 FRHC6L**2 FRSHC6L**2 fittings, split covers, and spillouts FRBC6X4L** FRRA6X4L** FRRASC6L** FRH456X4L** FRH45SC6L** FRT6X4L** FRTSC6L** FRFWC6X4L** FRFWCSC6L** FREC6X4L** FRIVRA6X4L** FRIV456X4L** FROV456x4L** FROV45SC6L** FROVRA6X4L** FROVRASC6L** FRRF6FR4L** FRRF6FR4SCL** FRRF64L** FRADC6X4L** FRTYT68 FRWBS68 FRVT6x4LYL FTR4X4L** FIDT4X4LBL FRHD4KT** TRC4HDLBL FRLPR42LBL FRSPJ2X2L** FRSPJC26L** FTR2X2L** FIDT2X2L** FRHD2KTL** TRC2HDLBL FRSPJ4X4L** FRSPJC46L** FRDDS6X4L** FRDDSHC6L** FRTR4X4L** FRIDT4X4L** FR1.5IDEL** FRTR6X4L** FRUPS6X4L** FITF6X4 FRIDT6X4L** Q u i k L o c kTM M o u n t i n g B r a c k e t s FR6TRBE12 FR6TRBE58 FR6TRBN12 FR6TRBN58 FR6USB FR6ALB FR6CS12 FR6CS58 FR6ACB12 FR6ACB58 FR6TB38 FR6TB12 F2PCLB12 F2PCLB58 FR6LRB **Substitute: YL= Yellow, BL= Black PANDUIT US/CANADA Phone: 800.777.3300 PANDUIT EUROPE LTD. London, UK Phone: 44.20.8601.7200 FR6LB FRRMBNF58 FR6ACAB FRAFC58 FR4PRB58 WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: 65.6305.7575 PANDUIT JAPAN Tokyo, Japan Phone: 81.3.6863.6000 PANDUIT LATIN AMERICA Guadalajara, Mexico Phone: 52.33.3777.6000 PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: 61.3.9794.9020 For a copy of Panduit product warranties, log on to www.panduit.com/warranty For more information Visit us at www.panduit.com Contact Customer Service by email: [email protected] or by phone: 800.777.3300 ©2020 Panduit Corp. ALL RIGHTS RESERVED. FRSP25--WW-UKE 9/2020Adobe InDesign 15.1 (Macintosh) Adobe PDF Library 15.0