Operating Instructions
Jun 7, 2021 — Operating Instructions (this document).... 1 pc. Camera ... Included Installation Instructions ... Panasonic i-PRO Sensing Solutions Co., Ltd. 2021.
Jun 9, 2021 — Caution: Before attempting to connect or operate this product, please read these instructions carefully. Notice: This product is not suitable for use ...
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 1.08MB
Document DEVICE REPORTPGQX2446ZAC1 WV-QAT502-W OI en 1623054563.2044Operating Instructions Included Installation Instructions Gangbox Adapter WV-QAT502-W Model No. WV-QAT502-G Before attempting to connect or install this product, please read these instructions carefully and save this manual for future use. Be sure to read "Precautions" in this document before use. The external appearance and other parts shown in this manual may differ from the actual product within the scope that will not interfere with normal use due to improvement of the product. Panasonic i-PRO Sensing Solutions Co., Ltd. assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Caution: Before attempting to connect or operate this product, please read these instructions carefully. Notice: This product is not suitable for use in locations where children are likely to be present. Do not install this product in locations where ordinary persons can easily reach. For information about screws and other parts required for installation, refer to the corresponding section of this document. Standard accessories Operating Instructions (this document).... 1 pc. Camera fixing screws.............................. 2 pcs. (M4 × 8 mm {5/16 inches}) Screw caps............................................... 2 pcs. Fixing screws............................................ 5 pcs. (M4 × 8 mm {5/16 inches}) (of them, 1 for spare) Precautions for installation In order to prevent injury, the product must be securely mounted to a Gangbox/ Junction box according to installation guide. Make sure to remove this product if it will no longer be used. Note: When installing outside, installation work shall be such that there is no exposure to water into the architecture through the Gangbox/Junction box or conduits having been joined. <Installation example> For U.S. and Canada: Panasonic i-PRO Sensing Solutions Corporation of America 800 Gessner Rd, Suite 700 Houston, TX 77024 https://www.security.us.panasonic.com/ Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario, L4W 2T3 Canada 1-877-495-0580 https://www.panasonic.com/ca/ © Panasonic i-PRO Sensing Solutions Co., Ltd. 2021 For Europe and other countries: Panasonic Corporation http://www.panasonic.com Panasonic i-PRO Sensing Solutions Co., Ltd. Fukuoka, Japan Authorised Representative in EU: Panasonic Testing Centre Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany Fs0321-0 Printed in China Preface This product is used when installing a compact dome type camera using a Gangbox/Junction box. For the latest information about the supported cameras, refer to our support website (https://security.panasonic.com/training_support/support/info/<Control No.:C0501>). Specifications Ambient operating temperature: Dimensions: Mass: Finish: 50 °C to +60 °C {58 °F to +140 °F} ø162mm × 6.2mm (H) {ø6-3/8 inches × 1/4 inches (H)} Approx. 144 g {0.32 lbs} Aluminum die cast WV-QAT502-W : i-PRO white WV-QAT502-G : Light gray <WV-U25xxL series> <WV-U21xxL series> <WV-S35xxL series> Installation Step 1 Compatible Gangbox/Junction box 46mm {1-13/16 inches} 83.5mm {3-9/32 inches} <WV-S31xxL series> Precautions Refer installation work to the dealer. Installation work requires technique and experience. Failure to observe this may cause fire, electric shock, injury, or damage to the product. Be sure to consult the dealer. Install the product securely on a Gangbox/Junction box in accordance with the installation instructions. Failure to observe this may cause injury or accidents. Do not use this product except with suitable cameras. Failure to observe this may cause a drop resulting in injury or accidents. Do not install this product on a place that is greatly influenced by wind. Installation on a place where the wind speed is 60m/s {approx. 134mph} or more may cause a fall of the product resulting in injury or accidents. The screws and bolts must be tightened to the specified torque. Failure to observe this may cause a drop resulting in injury or accidents. When using this product, also read the "Precautions" described in the operating instructions for the camera to be attached. <Double-Gangbox/Junction box> 63mm {2-15/32 inches} 63mm {2-15/32 inches} <Octagon-Gangbox/Junction box> Step 2 196 N {44 lbf} Fixing screw (4 pcs.) (M4: accessories) Fixing screw (2 pcs.) (M4: accessories) Step 6 1.37 N·m {1.01 lbf·ft} <WV-U25xxL series> <WV-U21xxL series> Camera fixing screw (2 pcs.) (M4: accessories) <WV-S35xxL series> Step 3 Screw cap (2 pcs.) (accessories) Step 4 Refer to the Installation Guide for each camera. Camera fixing screw (2 pcs.) (M4: accessories) <WV-S31xxL series> <WV-U25xxL series> <WV-U21xxL series> Camera fixing screw (2 pcs.) (M4: accessories) Step 7 Power ON (PoE), remove the protection film from the lens. Refer to the Installation Guide for the camera for detailed adjustment methods. Step 8 <WV-S35xxL series> <WV-S31xxL series> Step 5 Connect the cables to the camera. Refer to Installation Guide for each camera.