RF Exposure

Jiang Su Yisin Tech Co., Ltd AMP10 2.4G remote control 2A8MI-AMP10 2A8MIAMP10 amp10

Jiang Su Yisin Tech Co., Ltd AMP10 2A8MI-AMP10 2A8MIAMP10 amp10

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 6 Pages, 285.63KB

Document DEVICE REPORTGetApplicationAttachment.html?id=7381269
Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

1 of 6

FCC ID: 2A8MI-AMP10

TEST REPORT

Application No.:

BTEK240308013AE

Applicant:

V0

Address of Applicant:

Jiang Su Yisin Tech Co., Ltd

Manufacturer:

Rm. 103, Bldg. 1, No. 10, Wenzhou Rd., ETDZ, Shuyang County, Suqian, Jiangsu, CN

Address of Manufacturer: Jiang Su Yisin Tech Co., Ltd

Factory:

Rm. 103, Bldg. 1, No. 10, Wenzhou Rd., ETDZ, Shuyang County, Suqian, Jiangsu, CN

Address of Factory:

Rayson Technology (SZ)Co., Ltd.

Equipment Under Test (EUT):

EUT Name:

TX Microphone

Model No.:

AMP10

Trade Mark:

MoerLab

Standard(s) :

47 CFR Part 2 Subpart J Section 2.1093

Date of Receipt:

2024-03-08

Date of Test:

2024-03-08 to 2024-03-27

Date of Issue:

2024-04-01

Test Result:

Pass*

* In the configuration tested, the EUT complied with the standards specified above.

Damon Su EMC Laboratory Manager

Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

2 of 6

Version V0

Chapter

Revision Record Date 2024-04-01

Modifier

Remark Original

Authorized for issue by:

Carl Yang /Project Engineer Elma Yang /Reviewer

Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

3 of 6

2 Contents
Page 1 Cover Page ................................................................................................................................................1
2 Contents ....................................................................................................................................................3
3 General Information..................................................................................................................................4 3.1 Details of E.U.T. .................................................................................................................................4 3.2 Description of Support Units ..............................................................................................................4 3.3 Test Location......................................................................................................................................5 3.4 Deviation from Standards...................................................................................................................5 3.5 Abnormalities from Standard Conditions ...........................................................................................5
4 Test Requirement......................................................................................................................................6 4.1 Assessment Result ............................................................................................................................6

Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

4 of 6

3

General Information

3.1 Details of E.U.T.

Power supply:

DC 4.35V/3.8V from battery or recharge by USB port

Cable(s):

/

For Bluetooth

Frequency Range:

2402MHz to 2480MHz

Bluetooth Version:

V5.0 Classic

This test report is for classic mode.

Spectrum Spread Technology:

Frequency Hopping Spread Spectrum(FHSS)

Hopping Channel Type:

Adaptive Frequency Hopping systems

Modulation Type:

GFSK, /4DQPSK, 8DPSK

Number of Channels: 79

Sample Type:

Portable device

Antenna Type:

Chip Antenna

Antenna Gain:

2.66dBi

For BLE

Frequency Range:

2402MHz to 2480MHz

Bluetooth Version:

V5.0 Classic

Modulation Type:

GFSK

Number of Channels: 40

Sample Type:

Portable device

Antenna Type:

Chip Antenna

Antenna Gain:

2.66dBi

Remark: The information in this section is provided by the applicant or manufacturer, BANTEK is not liable to the accuracy, suitability, reliability or/and integrity of the information.

3.2 Description of Support Units

Description

Manufacturer

--

--

The EUT has been tested as an independent unit.

Model No. --

Serial No. --

Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

5 of 6

3.3 Test Location

All tests were performed at:

Shenzhen BANTEK Testing Co., Ltd.,

A5&A6, Building B1&B2, No.45 Gangtou Road, Bogang Community, Shajing Street, Bao'an District, Shenzhen, Guangdong, China 518103

Tel:0755-2334 4200

Fax: 0755-2334 4200

FCC Registration Number: 264293

Designation Number: CN1356

No tests were sub-contracted.

3.4 Deviation from Standards
None

3.5 Abnormalities from Standard Conditions
None

Shenzhen BANTEK Testing Co., Ltd.

Report No.: BTEK240308013AE003

Page:

6 of 6

4

Test Requirement

KDB447498 D01 General RF Exposure Guidance v06, Clause 4.3.1(a)

[(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] · [f(GHz)]  3.0

Where

-f(GHz) is the RF channel transmit frequency in GHz

-Power and distance are rounded to the nearest mW and mm before calculation

-The test exclusions are applicable only when the minimum test separation distance is  50 mm, and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 4.1 f) is applied to determine SAR test exclusion.

4.1 Assessment Result

Passed

Not Applicable

Type

Frequency Conducted

Maximum Calculating

(MHz) Power (dBm) Tune-up (dBm)

data

BT-EDR

2480

3.20

4

BT-BLE

2480

3.85

4

Note: The exposure evaluation safety distance is 5mm.

0.78 0.78

Limit
3.0 3.0

Result
Pass Pass

- End of the Report -



Related FCC IDs:

Search Any Device: