RF EXPOSURE EVALUATION
zhaowen
RF EXPOSURE EVALUATION
Shenzhen Qianyan Technology LTD H61C3 Govee RGBIC LED Neon Rope Light for desks 2A7VD-H61C3 2A7VDH61C3 h61c3
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 330.46KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7461117RF EXPOSURE EVALUATION KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies v06. According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b) EUT Specification FCC ID EUT Frequency band (Operating) Device category Exposure classification Antenna diversity Antenna gain (Max) Evaluation applied 2A7VD-H61C3 Govee RGBIC LED Neon Rope Light for desks BT: 2.402GHz ~ 2.480GHz WLAN: 2.412GHz ~ 2.462GHz RLAN: 5.180GHz ~ 5.240GHz RLAN: 5.260GHz ~ 5.320GHz RLAN: 5.500GHz ~ 5.700GHz RLAN: 5.745GHz ~ 5.825GHz Others: Portable (<20cm separation) Mobile (>20cm separation) Others ___ Occupational/Controlled exposure (S = 5mW/cm2) General Population/Uncontrolled exposure (S=1mW/cm2) Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity BLE: 4.51 dBi WiFi 2.4G: 3.85 dBi MPE Evaluation SAR Evaluation Limits for Maximum Permissible Exposure(MPE) Frequency Electric Field Magnetic Field Power Range(MHz) Strength(V/m) Strength(A/m) Density(mW/cm2) (A) Limits for Occupational/Control Exposures 300-1500 -- -- F/300 1500-100000 -- -- 5 (B) Limits for General Population/Uncontrol Exposures 300-1500 -- -- F/1500 1500-100000 -- -- 1 Average Time 6 6 6 30 Friis transmission formula: Pd=(Pout*G)\(4*pi*R2) Where Pd= Power density in mW/cm2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE, 1mW/cm2. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. Max Measurement Result Operating Mode BLE WiFi 2.4G Measured Power (dBm) 6.01 18.46 Tune up tolerance (dBm) 6.01 ±1 18.46 ±1 Max. Tune Antenna up Power Gain (dBm) 7.01 19.46 (dBi) 4.51 3.85 Power density at 20cm (mW/ cm2 ) Power density Limits (mW/cm2 ) 0.0028 1 0.0427 1 The WLAN 2.4G and BLE can transmit simultaneously: =SWIFI2.4/Slimit-2.4+ SBLE/Slimit-BLE =0.0028/1+0.0427/1 =0.0455 < 1.0 Result: No Standalone SAR test is required.
Related FCC IDs:
- 2A7VD-H61C3 - Shenzhen Qianyan Technology LTD Govee RGBIC LED Neon Rope Light for desks [-H61C3] WPS 文字