HD 271 S1
LAB02
Test report
NLU Products, LLC dba BGZ brands BLDCTT20 Lantern 2ALQR-BLDCTT20 2ALQRBLDCTT20 bldctt20
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 18 Pages, 2.29MB
Document DEVICE REPORTGetApplicationAttachment.html?id=5066247JianYan Testing Group Shenzhen Co., Ltd. Report No: JYTSZE201102603V01 1 Cover Page FCC REPORT Applicant: Address of Applicant: NLU Products, L.L.C. 2801 N Thanksgiving Way #300, Lehi, UT 84043 USA Equipment Under Test (EUT) Product Name: Lantern Model No.: Boulder Trade mark: Lander FCC ID: 2ALQR-BLDCTT20 Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: 30 Nov., 2020 Date of Test: 01 Dec., to 09 Dec., 2020 Date of report issued: 30 Dec., 2020 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the JYT product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Version No. 00 01 Report No: JYTSZE201102603V01 Date 10 Dec., 2020 30 Dec., 2020 Description Original Update section 5.2 Tested by: Test Engineer Date: 30 Dec., 2020 Reviewed by: Project Engineer Date: 30 Dec., 2020 JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 2 of 18 Report No: JYTSZE201102603V01 3 Contents Page 1 COVER PAGE.......................................................................................................................................................1 2 VERSION ...............................................................................................................................................................2 3 CONTENTS ...........................................................................................................................................................3 4 TEST SUMMARY..................................................................................................................................................4 5 GENERAL INFORMATION..................................................................................................................................5 5.1 CLIENT INFORMATION ......................................................................................................................................................5 5.2 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................................................5 5.3 TEST MODE AND TEST SAMPLES PLANS ................................................................................................................................5 5.4 MEASUREMENT UNCERTAINTY...........................................................................................................................................6 5.5 DESCRIPTION OF SUPPORT UNITS .......................................................................................................................................6 5.6 RELATED SUBMITTAL(S) / GRANT (S)...................................................................................................................................6 5.7 DESCRIPTION OF CABLE USED ............................................................................................................................................6 5.8 ADDITIONS TO, DEVIATIONS, OR EXCLUSIONS FROM THE METHOD .............................................................................................6 5.9 LABORATORY FACILITY......................................................................................................................................................6 5.10 LABORATORY LOCATION...............................................................................................................................................6 5.11 TEST INSTRUMENTS LIST...............................................................................................................................................7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................8 6.1 CONDUCTED EMISSION.....................................................................................................................................................8 6.2 RADIATED EMISSION ......................................................................................................................................................11 7 TEST SETUP PHOTO ........................................................................................................................................ 17 8 EUT CONSTRUCTIONAL DETAILS ................................................................................................................18 JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 3 of 18 Report No: JYTSZE201102603V01 4 Test Summary Test Item Section in CFR 47 Conducted Emission Part 15.107 Radiated Emission Part 15.109 Remark: 1. Pass: The EUT complies with the essential requirements in the standard. 2. N/A: The EUT not applicable of the test item. Test Method: ANSI C63.4:2014 Result Pass Pass JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 4 of 18 Report No: JYTSZE201102603V01 5 General Information 5.1 Client Information Applicant: Address: Manufacturer: Address: Factory: Address: NLU Products, L.L.C. 2801 N Thanksgiving Way #300, Lehi, UT 84043 USA NLU Products, L.L.C. 2801 N Thanksgiving Way #300, Lehi, UT 84043 USA CTT Co., Ltd Building 2 of Industrial park, No. 197, Xinhua Blvd, Tongqiao town, Zhongkai High-tech zone, Huizhou, Guangdong, China 516032. 5.2 General Description of E.U.T. Product Name: Model No.: Type-C: Type-A: Power supply: (Wireless charging) Power supply: Test Sample Condition: Lantern Boulder Charge-In : DC5 V, 3.0 A; DC9 V, 2.0 A; DC12 V, 1.5 A Charge-Out: DC5 V, 3.0 A; DC9 V, 2.0 A; DC12 V, 1.5 A Charge-Out: DC 5V, 2.4 A DC 5V, 1 A Input: 5V, 3A / 9V, 2A /12V, 1.5A Output: 5W, 7.5W Lithium-ion rechargeable battery DC3.63V, each 3350mAh * 4 total 13400mAh The test samples were provided in good working order with no visible defects. 5.3 Test Mode and test samples plans Operating mode Detail description Discharging + Working mode Discharging + Working mode Keep the EUT in Discharging + Wireless charging work + Turn on the light mode(Port A) Keep the EUT in Discharging + Wireless charging work + Turn on the light mode(Port C) Charging + Working mode Charging + Working mode Keep the EUT in Charging + Wireless charging work + Turn on the light mode(Port A) Keep the EUT in Charging + Wireless charging work +Turn on the light mode(Port C) The sample was placed 0.8m above the ground plane of 3m chamber. Measurements in both horizontal and vertical polarities were performed. During the test, each emission was maximized by: having the EUT continuously working, investigated all operating modes, rotated about all 3 axis (X, Y & Z) and considered typical configuration to obtain worst position, manipulating interconnecting cables, rotating the turntable, varying antenna height from 1m to 4m in both horizontal and vertical polarizations. The emissions worst-case are shown in Test Results of the following pages. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 5 of 18 Report No: JYTSZE201102603V01 5.4 Measurement Uncertainty Parameters Conducted Emission (9kHz ~ 30MHz) Radiated Emission (9kHz ~ 30MHz) Radiated Emission (30MHz ~ 1000MHz) Radiated Emission (1GHz ~ 18GHz) Radiated Emission (18GHz ~ 40GHz) Expanded Uncertainty ±1.60 dB (k=2) ±3.12 dB (k=2) ±4.32 dB (k=2) ±5.16 dB (k=2) ±3.20 dB (k=2) 5.5 Description of Support Units Manufacturer Skytek Apple Description Wireless charging match load Adapter Model / A1695 Serial Number FCC ID/DoC / / N/A N/A 5.6 Related Submittal(s) / Grant (s) This is an original grant, no related submittals and grants. 5.7 Description of Cable Used Cable Type Detached USB Cable Description Shielding Length 0.3m From EUT To Adapter 5.8 Additions to, deviations, or exclusions from the method No 5.9 Laboratory Facility The test facility is recognized, certified, or accredited by the following organizations: FCC - Designation No.: CN1211 JianYan Testing Group Shenzhen Co., Ltd. has been accredited as a testing laboratory by FCC(Federal Communications Commission). The test firm Registration No. is 727551. ISED CAB identifier.: CN0021 The 3m Semi-anechoic chamber of JianYan Testing Group Shenzhen Co., Ltd. has been Registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 10106A-1. A2LA - Registration No.: 4346.01 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. The test scope can be found as below link: https://portal.a2la.org/scopepdf/4346-01.pdf 5.10 Laboratory Location JianYan Testing Group Shenzhen Co., Ltd. Address: No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Tel: +86-755-23118282, Fax: +86-755-23116366 Email: [email protected], Website: http://www.ccis-cb.com JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 6 of 18 Report No: JYTSZE201102603V01 5.11 Test Instruments list Radiated Emission: Test Equipment Manufacturer 3m SAC Loop Antenna BiConiLog Antenna Horn Antenna Horn Antenna Horn Antenna EMI Test Software Pre-amplifier Pre-amplifier Spectrum analyzer Spectrum analyzer EMI Test Receiver Cable Cable Cable SAEMC SCHWARZBECK SCHWARZBECK SCHWARZBECK SCHWARZBECK SCHWARZBECK AUDIX HP CD Rohde & Schwarz Rohde & Schwarz Rohde & Schwarz ZDECL MICRO-COAX SUHNER Model No. 9m*6m*6m FMZB1519B VULB9163 BBHA9120D BBHA9120D BBHA 9170 E3 8447D PAP-1G18 FSP30 FSP40 ESRP7 Z108-NJ-NJ-81 MFR64639 SUCOFLEX100 Serial No. Cal. Date (mm-dd-yy) Cal. Due date (mm-dd-yy) 966 07-22-2020 07-21-2021 00044 03-07-2020 03-06-2021 497 03-07-2020 03-06-2021 916 03-07-2020 03-06-2021 1805 06-22-2020 06-21-2021 BBHA9170582 11-18-2020 11-17-2021 Version: 6.110919b 2944A09358 03-07-2020 03-06-2021 11804 03-07-2020 03-06-2021 101454 03-05-2020 03-04-2021 100363 11-18-2020 11-17-2021 101070 03-05-2020 03-04-2021 1608458 03-07-2020 03-06-2021 K10742-5 03-07-2020 03-06-2021 58193/4PE 03-07-2020 03-06-2021 Conducted Emission: Test Equipment EMI Test Receiver Pulse Limiter LISN LISN Cable EMI Test Software Manufacturer Rohde & Schwarz SCHWARZBECK CHASE Rohde & Schwarz HP AUDIX Model No. ESCI OSRAM 2306 MN2050D ESH3-Z5 10503A E3 Serial No. Cal. Date (mm-dd-yy) Cal. Due date (mm-dd-yy) 101189 03-05-2020 03-04-2021 9731 03-05-2020 03-04-2021 1447 03-05-2020 03-04-2021 8438621/010 06-18-2020 06-17-2021 N/A 03-05-2020 03-04-2021 Version: 6.110919b JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 7 of 18 Report No: JYTSZE201102603V01 6 Test results and Measurement Data 6.1 Conducted Emission Test Requirement: Test Frequency Range: Class / Severity: Receiver setup: Limit: Test setup: FCC Part 15 B Section 15.107 150kHz to 30MHz Class B Class B RBW=9kHz, VBW=30kHz Frequency range (MHz) Limit (dBµV) Quasi-peak Average 0.15-0.5 66 to 56* 56 to 46* 0.5-5 56 46 0.5-30 60 50 * Decreases with the logarithm of the frequency. Test procedure Test Instruments: Test mode: Test results: 1. The E.U.T and simulators are connected to the main power through a line impedance stabilization network(L.I.S.N.). The provide a 50ohm/50uH coupling impedance for the measuring equipment. 2. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs). 3. Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed according to ANSI C63.4(latest version) on conducted measurement. Refer to section 5.11 for details Refer to section 5.3 for details Pass JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 8 of 18 Measurement data: Product name: Lantern Test by: YT Test frequency: 150 kHz ~ 30 MHz Test voltage: AC 120 V/60 Hz Report No: JYTSZE201102603V01 Product model: Test mode: Phase: Environment: Boulder Working mode Line Temp: 22.5 Huni: 55% Notes: 1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 9 of 18 Product name: Test by: Test frequency: Test voltage: Lantern YT 150 kHz ~ 30 MHz AC 120 V/60 Hz Report No: JYTSZE201102603V01 Product model: Test mode: Phase: Environment: Boulder Working mode Neutral Temp: 22.5 Huni: 55% Notes: 1. An initial pre-scan was performed on the line and neutral lines with peak detector. 2. Quasi-Peak and Average measurement were performed at the frequencies with maximized peak emission. 3. Final Level =Receiver Read level + LISN Factor + Cable Loss. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 10 of 18 Report No: JYTSZE201102603V01 6.2 Radiated Emission Test Requirement: Test Frequency Range: Test site: Receiver setup: Limit: Test setup: FCC Part 15 B Section 15.109 30MHz to 6000MHz Measurement Distance: 3m (Semi-Anechoic Chamber) Frequency 30MHz-1GHz Detector Quasi-peak RBW VBW Remark 120kHz 300kHz Quasi-peak Value Above 1GHz Peak RMS Frequency 30MHz-88MHz 88MHz-216MHz 216MHz-960MHz 960MHz-1GHz Above 1GHz 1MHz 3MHz 1MHz 3MHz Limit (dBuV/m @3m) 40.0 43.5 46.0 54.0 54.0 74.0 Peak Value Average Value Remark Quasi-peak Value Quasi-peak Value Quasi-peak Value Quasi-peak Value Average Value Peak Value Below 1GHz Above 1GHz Test Procedure: 1. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic camber. The table was rotated 360 degrees to determine the position of the highest radiation. 2. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. 3. The antenna height is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 11 of 18 Test Instruments: Test mode: Test results: Remark: Report No: JYTSZE201102603V01 4. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. 5. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. 6. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. Refer to section 5.11 for details Refer to section 5.3 for details Passed All of the observed value above 6GHz ware the niose floor , which were no recorded JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 12 of 18 Measurement Data: Below 1GHz: Product Name: Lantern Test By: YT Test Frequency: 30 MHz ~ 1 GHz Test Voltage: AC 120/60Hz Report No: JYTSZE201102603V01 Product Model: Test mode: Polarization: Environment: Boulder Boulder Working mode Vertical Temp: 24 Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. 3. The Aux Factor is a notch filter switch box loss, this item is not used. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 13 of 18 Product Name: Test By: Test Frequency: Test Voltage: Lantern YT 30 MHz ~ 1 GHz AC 120/60Hz Report No: JYTSZE201102603V01 Product Model: Test mode: Polarization: Environment: Boulder Working mode Horizontal Temp: 24 Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. 3. The Aux Factor is a notch filter switch box loss, this item is not used. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 14 of 18 Above 1GHz: Product Name: Test By: Test Frequency: Test Voltage: Lantern YT 1 GHz ~ 6 GHz AC 120/60Hz Report No: JYTSZE201102603V01 Product Model: Test mode: Polarization: Environment: Boulder Working mode Vertical Temp: 24 Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 15 of 18 Product Name: Test By: Test Frequency: Test Voltage: Lantern YT 1 GHz ~ 6 GHz AC 120/60Hz Report No: JYTSZE201102603V01 Product Model: Test mode: Polarization: Environment: Boulder Working mode Horizontal Temp: 24 Huni: 57% Remark: 1. Final Level = Receiver Read level + Antenna Factor + Cable Loss Preamplifier Factor. 2. The emission levels of other frequencies are very lower than the limit and not show in test report. JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 16 of 18 7 Test Setup Photo Report No: JYTSZE201102603V01 Radiated Emission Below 1GHz Above 1GHz JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 17 of 18 Report No: JYTSZE201102603V01 Conducted Emission 8 EUT Constructional Details Reference to the test report No.: JYTSZE201102601. ------End of report------ JianYan Testing Group Shenzhen Co., Ltd. No.110~116, Building B, Jinyuan Business Building, Xixiang Road, Bao'an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Project No.: JYTSZE2011026 Page 18 of 18
Related FCC IDs:
- 2ALQR-BLDCTT20 - NLU Products, LLC dba BGZ brands Lantern [-BLDCTT20] Microsoft Word 2010 Microsoft Word 2010