Control4 CORE 5 Controller Installation Guide

Dan Hart

Control4 CORE5 Controller Installation Guide

Control4 C4CORE5 C4-CORE5 842822053624

Control4 CORE 5 Controller Installation Guide

Additional resources The following resources are available for more support. • Control4 CORE series help and information: ctrl4.co/core • Snap One Tech Community and Knowledgebase: tech.control4.com

Installation Guide for Control4 models including: CORE5, Controller, CORE5 Controller

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 1.70MB

Document DEVICE REPORTcore-5-installation-guide-rev-a
Control4 CORE 5 Controller
Installation Guide
Supported model
· C4-CORE5 Control4 CORE 5 Hub & Controller
Introduction
Designed for the ultimate multi-room automation and entertainment experience, the Control4® CORE 5 Controller features the highest-quality audio of the Control4® CORE Series and an advanced smart automation experience for those larger projects including hundreds of smart devices. The CORE 5 is built to automate sophisticated home theaters, complex interior and exterior lighting scenes, vital security and communications systems, and multizone climate controls.
The CORE 5 delivers a beautiful, intuitive, and responsive on-screen user interface with the ability to create and enhance the entertainment experience for any TV in the house. The CORE 5 can orchestrate a wide range of entertainment devices including Blu-ray players, satellite or cable boxes, game consoles, TVs, and virtually any product with infrared (IR) or serial (RS232) control. It also features IP control for Apple TV, Roku, televisions, AVRs, or other network-connected devices, as well as smart automation control utilizing contact, relay, and secure wireless Zigbee and Z-Wave control for lights, thermostats, smart locks, and more.
For entertainment, the CORE 5 also includes a built-in music server that allows you to listen to your own music library, stream from a variety of leading music services, or from your AirPlay-enabled devices using Control4 ShairBridge technology
Box contents
The following items are included in the box:
· CORE 5 controller · AC power cord · IR emitters (4) · Rack ears (2, pre-installed) · Rubber feet (4) · External antennas (2, 1 for Zigbee and 1 for Z-Wave) · Terminal blocks for contacts and relays
Accessories sold separately
· Control4 3-Meter Wireless Antenna Kit (C4-AK-3M) · Control4 Dual-Band Wi-Fi USB Adapter (C4-USBWIFI OR C4-USBWIFI-1) · Control4 3.5 mm to DB9 Serial Cable (C4-CBL3.5-DB9B)
Warnings
Caution! To reduce the risk of electrical shock, do not expose this apparatus to rain or moisture. Avertissement ! Pour réduire le risque de choc électrique, n'exposez pas cet appareil à la pluie ou à l'humidité. Caution! In an over-current condition on USB or contact output the software disables the output. If the attached USB device or contact sensor does not appear to power on, remove the device from the controller. Avertissement ! Dans une condition de surintensité sur USB ou sortie de contact le logiciel désactive sortie. Si le périphérique USB ou le capteur de contact connecté ne semble pas s'allumer, retirez le périphérique du contrôleur.

Caution! If this product is used as a means to open and close a garage door, gate, or similar device, use safety or other sensors to ensure safe function. Follow appropriate regulatory and safety standards governing project design and installation. Failure to do so may result in property damage or personal injury.
Requirements and specifications
Note: We recommend using Ethernet instead of Wi-Fi for the best network connectivity.
Note: The Ethernet or Wi-Fi network should be installed before you install the CORE 5 controller.
Note: The CORE 5 requires OS 3.3 or higher.

Composer Pro is required to configure this device. See the Composer Pro User Guide (ctrl4.co/cpro-ug) for details.

Specifications
Video out Video Audio out Audio playback formats High-res audio playback Audio in Audio delay on audio in Digital signal processing
Signal-to-noise ratio Total harmonic distortion
Ethernet
Wi-Fi
Wi-Fi security Zigbee Pro Zigbee antenna Z-Wave Z-Wave antenna USB port
IR OUT IR capture SERIAL OUT Contact Relay
Power requirements Power consumption
Operating temperature Storage temperature Dimensions (H × W × D) Weight Shipping weight

Inputs / Outputs 1 video out--1 HDMI HDMI 2.0a; 3840x2160 @ 60Hz (4K); HDCP 2.2 and HDCP 1.4 7 audio out--1 HDMI, 3 stereo analog, 3 digital coax AAC, AIFF, ALAC, FLAC, M4A, MP2, MP3, MP4/M4A, Ogg Vorbis, PCM, WAV, WMA Up to 192 kHz / 24 bit 2 audio in--1 stereo analog, 1 digital coax Up to 3.5 seconds, depending on network conditions Digital coax in--Input level Audio out 1/2/3 (analog)--Balance, volume, loudness, 6-band PEQ, mono/stereo, test signal, mute Digital coax out 1/2/3--Volume, mute <-118 dBFS 0.00023 (-110 dB)
Network 1 10/100/1000BaseT compatible port (required for controller setup). Optional Dual-Band Wi-Fi USB Adapter (2.4 GHz, 5 Ghz, 802.11ac/b/g/n/a) WPA/WPA2 802.15.4 External reverse SMA connector Z-Wave 700 series External reverse SMA connector 2 USB 3.0 port--500mA
Control 8 IR out--5V 27mA max output 1 IR receiver--front; 20-60 KHz 4 Serial out--2 DB9 ports and 2 shared with IR out 1-2 4 contact sensors--2V-30VDC input, 12VDC 125mA maximum output 4 relays--AC: 36V, 2A maximum voltage across relay; DC: 24V, 2A maximum voltage across relay
Power 100-240 VAC, 60/50Hz Max: 40W, 136 BTUs/hour Idle: 15W, 51 BTUs/hour
Other
32°F ~ 104°F (0°C ~ 40°C)
4°F ~ 158°F (-20°C ~ 70°C) 1.65 × 17.4 × 9.92" (42 × 442 × 252 mm) 5.9 lbs (2.68 kg) 9 lbs (4.08 kg)

Additional resources
The following resources are available for more support. · Control4 CORE series help and information: ctrl4.co/core · Snap One Tech Community and Knowledgebase: tech.control4.com · Control4 Technical Support: ctrl4.co/techsupport · Control4 website: www.control4.com
Front view

ABCDE
A Activity LED--The LED indicates that the controller is streaming audio. B IR window--IR receiver for learning IR codes. C Caution LED--This LED shows solid red, then blinks blue during the boot
process. Note: The Caution LED flashes orange during the factory restore process. See "Reset to factory settings" in this document.
D Link LED--The LED indicates that the controller has been identified in a Control4 project and is communicating with Director.
E Power LED--The blue LED indicates that AC power is connected. The controller turns on immediately after power is applied to it.
Back view

A

B C D EFG H

I

J

KL

A Power plug port--AC power receptacle for an IEC 60320-C13 power cord. B Contact/Relay port--Connect up to four relay devices and four contact
sensor devices to the terminal block connector. Relay connections are COM, NC (normally closed), and NO (normally open). Contact sensor connections are +12, SIG (signal), and GND (ground). C ETHERNET--RJ-45 jack for a 10/100/1000 BaseT Ethernet connection. D USB--Two port for an external USB drive or the optional Dual-Band Wi-Fi USB Adapter. See "Set up external storage devices" in this document. E HDMI OUT--An HDMI port to display system menus. Also an audio out over HDMI. F ID and FACTORY RESET--ID button to identify the device in Composer Pro.
The ID button on the CORE 5 is also an LED that displays feedback useful
during a factory restore. G ZWAVE--Antenna connector for the Z-Wave radio H SERIAL--Two serial ports for RS-232 control. See "Connecting the serial
ports" in this document. I IR / SERIAL--Eight 3.5 mm jacks for up to eight IR emitters or for a
combination of IR emitters and serial devices. Ports 1 and 2 can be configured independently for serial control or for IR control. See "Setting up IR emitters" in this document for more information. J DIGITAL AUDIO--One digital coax audio input and three output ports. Allows audio to be shared (IN 1) over the local network to other Control4 devices. Outputs audio (OUT 1/2/3) shared from other Control4 devices or from digital audio sources (local media or digital streaming services such as TuneIn.) K ANALOG AUDIO--One stereo audio input and three output ports. Allows audio to be shared (IN 1) over the local network to other Control4 devices. Outputs audio (OUT 1/2/3) shared from other Control4 devices or from digital audio sources (local media or digital streaming services such as TuneIn.) L ZIGBEE--Antenna connector for the Zigbee radio.

Installing the controller

To install the controller:
1 Ensure that the home network is in place before starting system setup. The controller requires a network connection, Ethernet (recommended) or Wi-Fi (with optional adapter), to use all of the features as designed. When connected, the controller can access web-based media databases, communicate with other IP devices in the home, and access Control4 system updates.

2 Mount the controller in a rack or place it on a shelf. Always allow plenty of ventilation. See "Mounting the controller in a rack" in this document.
3 Connect the controller to the network.
· Ethernet--To connect using an Ethernet connection, plug the data cable from the home network connection into the controller's RJ-45 port (labeled ETHERNET IN) and the network port on the wall or at the network switch.
· Wi-Fi--To connect using Wi-Fi, first connect the controller to Ethernet, and then use Composer Pro System Manager to reconfigure the controller for Wi-Fi.
4 Connect system devices. Attach IR and serial devices as described in "Connecting the IR ports/serial ports" and "Setting up IR emitters."
5 Set up any external storage devices as described in "Setting up external storage devices" in this document.
6 Power up the controller. Plug the power cord into the controller's power plug port and then into an electrical outlet.
Mounting the controller in a rack
Using the pre-installed rack-mount ears, the CORE 5 can easily be mounted in a rack for convenient installation and flexible rack placement.
Connecting the serial ports
The CORE 5 controller provides four serial ports. SERIAL 1 and SERIAL 2 can connect to a standard DB9 serial cable. IR ports 1 and 2 (SERIAL 3 and 4) can be reconfigured independently for serial communication. If not used for serial, they can be used for IR. Connect a serial device to the controller using the Control4 3.5 mm-to-DB9 Serial Cable (C4-CBL3.5-DB9B, sold separately).
1 The serial ports support many different baud rates (acceptable range: 1200 to 115200 baud for odd and even parity). Serial ports 3 and 4 (IR 1 and 2) do not support hardware flow control.
2 See Knowledgebase article #268 (ctrl4.co/contr-serial-pinout) for pinout diagrams.
3 To configure a port's serial settings, make the appropriate connections in your project using Composer Pro. Connecting the port to the driver will apply the serial settings contained in the driver file to the serial port. See the Composer Pro User Guide for details.
Note: Serial ports 1, 2, 3, and 4 can be configured as straightthrough or null with Composer Pro. Serial ports by default are configured straight-through and can be changed in Composer by selecting the option Null Modem Enabled (SERIAL 1, 2, 3, or 4).
Setting up IR emitters
The CORE 5 controller provides 8 IR ports. Your system may contain thirdparty products that are controlled through IR commands. The included IR emitters can send commands from the controller to any IR-controlled device.
1 Connect one of the included IR emitters into an IR OUT port on the controller.
2 Remove the adhesive backing from the emitter (round) end of the IR emitter and affix it to the device to be controlled over the IR receiver on the device.
Setting up external storage devices
You can store and access media from an external storage device, for example, a USB drive, by connecting the USB drive to the USB port and configuring or scanning the media in Composer Pro. A NAS drive can also be used as an external storage device; see the Composer Pro User Guide (ctrl4.co/cpro-ug) for more details.
Note: We support only externally powered USB drives or solid-state USB drives (USB thumb drives). USB hard drives that do not have a separate power supply are not supported.
Note: When using USB storage devices on an CORE 5 controller, a single primary partition formatted FAT32 is recommended.

Composer Pro driver information
Use Auto Discovery and SDDP to add the driver to the Composer project. See the Composer Pro User Guide (ctrl4.co/cpro-ug) for details.
OvrC setup and configuration
OvrC gives you remote device management, real-time notifications, and intuitive customer management, right from your computer or mobile device. Setup is plug-and-play, with no port forwarding or DDNS address required.
To add this device to your OvrC account:
1 Connect CORE 5 controller to the Internet.
2 Navigate to OvrC (www.ovrc.com) and log in to your account.
Add the device (MAC address and Service Tag numbers needed for authentication).
Pluggable terminal block connectors
For the contact and relay ports, the CORE 5 makes use of pluggable terminal block connectors which are removable plastic parts that locks in individual wires (included).
To connect a device to the pluggable terminal block:
1 Insert one of the wires required for your device into the appropriate opening in the pluggable terminal block you reserved for that device.
2 Use a small flat-blade screwdriver to tighten the screw and secure the wire in the terminal block.
Example: To add a motion sensor (see Figure 3), connect its wires to the following contact openings:
· Power input to +12V
· Output signal to SIG
· Ground connector to GND
Note: To connect dry contact closure devices, such as doorbells, connect the switch between +12 (power) and SIG (signal).

Connecting the contact ports
The CORE 5 provides four contact ports on the included pluggable terminal blocks. See the examples below to learn how to connect devices to the contact ports. Wire the contact to a sensor that also needs power (Motion sensor)
Motion Sensor
+12V 0V COM NO
Wire the contact to a dry contact sensor (Door contact sensor)
Dry Contact

Troubleshooting
Reset to factory settings
Caution! The factory restore process will remove the Composer project. To restore the controller to the factory default image:
1 Insert one end of a paper clip into the small hole on the back of the controller labeled RESET.
2 Press and hold the RESET button. The controller resets and the ID button changes to solid red.
3 Hold the button until the ID flashes double orange. This should take five to seven seconds. The ID button flashes orange while the factory restore is running. When complete, the ID button turns off and the device power cycles one more time to complete the factory restore process.
Note: During the reset process, the ID button provides the same feedback as the Caution LED on the front of the controller.

More help
For the latest version of this document and to view additional materials, open the URL below or scan the QR code on a device that can view PDFs.

MOST RECENT VERSION

MORE INFO ON CORE CONTROLLERS

ctrl4.co/core5-ig

ctrl4.co/core

Legal, Warranty, and Regulatory/Safety information
Visit snapone.com/legal for details.

Wire the contact to an externally powered sensor (Driveway sensor)

External 12V Power

Driveway Sensor

Power cycle the controller
1 Press and hold the ID button for five seconds. The controller turns off and back on.

Connecting the relay ports The CORE 5 provides four relay ports on the included pluggable terminal blocks. See the examples below to learn now to connect various devices to the relay ports.
Wire the relay to a single-relay device, normally open (Fireplace)
Fireplace

Reset the network settings
To reset the controller network settings to the default:
1 Disconnect power to the controller.
2 While pressing and holding the ID button on the back of the controller, power on the controller.
3 Hold the ID button until ID button turns solid orange and the Link and Power LEDs are solid blue, and then immediately release the button.
Note: During the reset process, the ID button provides the same feedback as the Caution LED on the front of the controller.

Wire the relay to a dual-relay device (Blinds)

Dual-Relay Blind

Relay 1

UP COM DOWN

Relay 2

Wire the relay with power from the contact, normally closed (Amplifier trigger)
12V Trigger

LED status information

Activity

Caution

Link

Power

--Flashing LED

--Solid LED

Just powered on Boot started Boot complete Network reset check Factory restore underway Connected to Director Playing audio Updating Update error No IP address

control4.com | 888.400.4070

Copyright 2022, Snap One, LLC. All rights reserved. Snap One and its respective logos are

registered trademarks or trademarks of Snap One, LLC (formerly known as Wirepath Home

Systems, LLC), in the United States and/or other countries. 4Store, 4Sight, Control4, Control4 My

Home, SnapAV, Mockupancy, NEEO, OvrC, Wirepath, and Wirepath ONE are also registered

trademarks or trademarks of Snap One, LLC. Other names and brands may be claimed as the property of their respective owners. Snap One makes no claim that the information contained

A

herein covers all installation scenarios and contingencies, or product use risks. Information 200-00722-A

within this specification subject to change without notice.

2022-06-02 DH



References

Adobe PDF Library 16.0.7

Search Any Device: