router WiFi LED controller
Deng Tianxiong
router WiFi LED controller - Kutop
3 manual Detailed instructions of product using methods 4 USB cable Using when connected with computer . Kutop international limited www.kutop.com [email protected] Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 ...
3 manual Detailed instructions of product using methods 4 USB cable Using when connected with computer .
router WiFi LED controller
Name 1 WF400 Controller 2 disk 3 manual 4 USB cable. Instruction. It is the core of product, is responsible for receiving control signal and controlling LED equipment.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 19 Pages, 1.41MB
Document DEVICE REPORTrouter WiFi LED controllerKutop international limited www.kutop.com [email protected] Product specification NameLED WIFI Controller I. Product Summarization Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited 1. Product constitution www.kutop.com [email protected] NO. Name 1 WF400 Controller 2 disk 3 manual 4 USB cable Instruction It is the core of product, is responsible for receiving control signal and controlling LED equipment. Include mobile software of IOS operating system and Android operating system Detailed instructions of product using methods Using when connected with computer 2. Product summarization WF400 is another wifi controller independently developed by our company, following our WF100, compared with WF100, WF400 is more powerful, and more flexible to use, when using, you do not need to switch wireless networks, it is more convenient to be on internet. You can choose encrypt network, can also open network. It's more convenient for you to choose wireless network with WiFiManager network management software, WF400 network configuration. Combined our independently developed mobile software Touchhome with controller, this makes the function of WF400 more better than WF100. Supporting the use of software with WF400, it can achieve single point control and group control, in addition, it includes some features, such as re-name of controller, set the location, timing control and other function. This makes the function of WF400 more powerful. Trough the use of WIFI technology, it provides more comfortable, safer and more convenient intelligent lighting control than traditional lighting control, optimizes the lighting control methods, which brings a new, comfortable lighting environment to users. II. Technical Parameters 1. Software technical parameters 1.1 Control software: 1. Name: Touch Home 2. Runtime platform: Android system (iphone, ipad), equipment must have WiFi function. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] 3. Language: English 4. Category: communications 5. Other: Free, no plug-ins 1.2 Configuration software 1. Name: WiFiManager 2. Runtime platform: Win 7/Windows Vista/Win2003/WinXP/Win2000 3. Language: English 4. Category: communications (USB) 5. Others: Free, no plug-ins 2. Controller technical parameters 1. Working voltage: DC5-24V 2. Working temperature: -20-60 3. Working Power consumption: about 1.6W 4. Output: 3 channel common anode, Max. current4A/each channel, with over current protection 5. Packing dimension: L215 * W165 * H55(mm) 6. External dimension: L107 * W65 * H30mm 7. Controller weight: 340g 8. Remote control weight: 85g 9. Gross weight: 460g 10. Receiving sensitivity: 802.11b/g DSSS(-5dBm)802.11b CCK (-10dBm)802.11g OFDM(-15dBm)m) 3. Remote control technical parameters 1. Working temperature:-20-60 2. Power supply method:AAA*3 3. Supply voltage: 1.5V*3 4: Standby power: 0.015mW 5. Standby current:: 3uA 6. Working current: 200uA 7. Emission current: 10mA 8. Remote control distance: about 30m 9. Standby time: 6 month III. Instruction for use Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] Proper use of WF400 mainly includes the following steps: Step1Recognize and identify the controller interfaces Understand the function of each interface on the controller, its basic usage and wiring. Refer to the controller interface instructions. Step 2: Configure the controller Through WiFiManager, you can configure various parameters of the controller, including the name, location, network, time, output type and so on, facilitate user to recognize and control. Refer to WiFiManager instructions. Step 3: Install controller Understand specific wiring of controller and installation requirements. Refer to hardware installation instructions of controller. Step 4: Remote control Describes specific use of touch remote control. Refer to remote control instructions. Step 5: Mobile phone control Brief description control method of mobile phone. Refer to TouchHome instructions. 1. Controller Interface Description 1.1 Indicator Status Description No. Indicator Function description 1 Power Power indicator light, long-time bright shows power supply normally 2 Wifi WIFI signal indicator 3 Link Signal indicator of mobile phone control 4 RF Signal indicator of touch remote control Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] Power: indicator bright for long time shows power supply is normal, otherwise the power supply is not normal; WiFi: when connected with network normally, indicator flashes slowly, when the network is experiencing a problem, indicator flashes fast; Link: If there is no operation, the indicator is off, when control with mobile phone, it flashes; RF: If there is no operation, the indicator is off, when control with remote control, it flashes; 1.2 Interface Description Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] 1. CONFIG Communction interface that should be connected with computer, works with WIFIManager software, it is used for configuring the controller parameters, including working mode, WIFI network, the name of controller, controller location, output type, read the device serial number, etc. 2. Match The key is used for matching the controller with remote control. The first time use the remote control or change remote control, you need to use this button to match the remote control with controller, then you can use touch remote to control the controller properly. 3. Function Mode switch (short press for 1s): switch built-in mode of controller; ON/OFF (long press for 3s) : turn on/off controller 4. Input/ Output Input: V+: positive of power input V-: negative of power input Output: V+: positive of output CH1: output channel 1 (RGB: R; CT: C; DIM: CH1) CH2: output channel 2 (RGB: G; CT: W; DIM: CH2) CH3: output channel 3 (RGB: B; CT: -; DIM: CH3) Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] 5. ANT ANT: WIFI antenna RF: touch remote control antenna 2. WiFiManager Instruction for use 1. Summarization WiFiManager setup software is connected with controller through host USB. It mainly used to modify the network configuration of the controller, select wireless network, switch network mode, modify properties, such as the controller's name, location, type and so on. User can flexibly choose the wireless network, modify the information of controller. 2. Instructions for use 2.1 Install WiFiManager Remove the disc include with the controller into disc drive. Open the disc and find "WiFiManager.exe" to install software. 2.2 Use methods of WiFiManager Open WiFiManager, it appears interface as shown below (figure 3.1): buttons of window are gray, this is because the controller is not connected. After connecting the controller through USB cable, it will appear the interface as shown in figure 3.2. Then you can operate the controller. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] Figure 3.1 Figure 3.2 1. name of controllers: the name of current connected controllers, it can be modified in the settings 2. output type of controllers: output type of current connected controllers, select the appropriate output type according to user's lighting type, it can be set to three output types: three-channel, two-channel, single-channel. It can be modified in the settings. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] 3. installation location of controllers This option displays the installation location of controller, it can be modified 4. networking methods Connection mode of current connected controllers 5. serial number of controllers Serial number of current connected controller, it can not be modified. 6. searching Search available wireless networks. The results of searching will display on the area "8", this is all currently available networks. 7. setting Set the parameters of controllers. (for detailed description, refer to 2.3) 8. current wireless network Wireless networks list of currently searching 9. connecting Connected to the currently selected network. Click "connect" to join the current network, if the network is encrypted, it will prompt you to enter your password, if it is not, it will connected to this network directly. Figure 3.3 2. 3 Descriptions of parameters in setting page (Figure 3.3) 1. WiFi working mode Infra: Infra network, connect with existing wireless network; Adhoc: Ad hoc network, you do not need to connect with an external router, use mobile phone to control the controllers directly. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] (Note: Currently it only supports Infra mode) 2. SSID (suitable for Adhoc mode) Under Adhoc mode, you can set SSID, under Infra mode, it is invalid. 3. Encryption (suitable for Adhoc mode) Open network: No security Encrypted network: support encryption such as WEP64/WEP128/TKI/AES etc. 4. encryption password (suitable for Adhoc mode) Set the encryption password (at least 8 characters) 5. output type User should select corresponding output mode based on the lamps: WF400A: full color lamps, three-channel (default); WF400B: color temperature lamps, two-channel; WF400C: single color lamps; single-channel. 6. set the name of controller User can set the name of controller according to their needs (up to 32 characters), this makes the controller more humane. 7. set the location of controller Set the location of controller (up to 32 characters). User can set specific location according to their arrangement, facilitate users to identify the location of lamps. 8. selection of WiFi channel User can select the appropriate channel according to the needs, generally it can be set to Auto. 9. time synchronization of controller The controller time should synchronize with computer to ensure that the timer works properly. 10. OK/ Cancel OK: confirm the operation, the setting will take effect; Cancel: cancel the operation, the setting will be canceled. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com 3. Instructions for remote control [email protected] 1. on/off key 2pause key 3mode+ 4mode5. Color pulley key 6brightness+ 7brightness- 8speed+ 9speed- 1. Key description Touch remote panel have 64 touch button (point), each button function is as below: 1. on/off key, any state, can turn on or turn off controller output; 2. pause key, under dynamic mode, can make the controller stop current state; 3. this key have 2 function: mode increase key, so when the current control mode is pulley mode(color), if it need to realize the mode(color) in controller, can press this button. mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color) in M+ key mode table. 4. This key have 2 functions: mode minus key, so when the current control mode is pulley mode(color), if it need to realize the mode(color) in controller, can press this button. mode switch key, so when the current control mode is M key mode, can switch the regulation mode(color) in M- key mode table. 5. output brightness control key, every time you press this button,the brightness series add 1, altogether 100 levels; Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] 6. output brightness control key, every time you press this button,the brightness series minus 1, altogether 100 levels; 7. output speed control key, every time you press this button,the speed series add 1, altogether 100 levels; 8. output speed control key, every time you press this button,the speed series minus 1, altogether 100 levels; 9. Color pulley touch button, static mode choose key, up to 55 touch points. This key have 2 functions: pulley static color choose button, so when the current control mode is M key mode(color), if need to realize the static color on pulley, can press this button. pulley color switch key: can switch from 55 static color(pulley shows color). 2Power management: Stop using remote control for about 15-20s, remote control will automatically enter into standby mode, to extend the battery life for use. Color pulley touch button can not be used at this time, you must firstly click one button to wake up remote touch control, return to work station. Note: All function of remote control is applicable to WF400A (factory default), that is RGB mode, in WF400B mode, M+, M-, B+, B- is effective, when in WF400C, only M+, M- is effective. 4. Instruction for TouchHome 1. Summarization TouchHome is the control software that supports the use of controller, it is applicable to a single controller or multiple controllers at the same time. If has multiple controllers, user can carry out group control. The software applies to a variety of our controllers, it will load different control page depending on different controllers to adapt different controllers, facilitate user to operate. The software has features such as timer control, self-defined colors and so on dependingon different controllers, for detailed instructions, please refer to the software manual. 2. Instruction for use 2.1 Install TouchHome Firstly make sure that you have already installed iTunes, if you have not installed, please download the lastest version of iTunes, after installation is complete, search "TouchHome" in application, install the software to your mobile phone or ipad. 2.2 Connect WiFi network Firstly using WiFiManager software, connect all the controllers to user's wireless network, then connect the mobile phone with "TouchHome" to the wireless network, search equipments, add the equipments into control list, then you can control the controllers. for detailed instructions, please refer to the software manual. 2.3 Summary Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] WF400A mode: The mode is suitable for RGB strip, it can carry out mode switch, brightness and speed adjustment, self-defined colors and other functions. When there are multiple controllers, user can also carry out group control. WF400B mode: The mode is suitable for color temperature strip, it can carry out mode switch, brightness and color temperature adjustment. When there are multiple controllers, user can carry out group control, as well as timer control. WF400C mode: The mode is suitable for single color strip, it can carry out mode switch, brightness adjustment. When there are multiple controllers, user can carry out group control, as well as timer control. 5. Mode description of controller When you select a different mode, the output mode of controller is different, the working mode should be configured according to the type of strip. When using RGB strip, user should select working mode as WF400A; when using color temperature strip, should select WF400B; when using single color strip, should select WF400C. Specific mode table is as follow: 1. WF400A mode: WF400A mode: When using RGB strip, user should select this mode. It can control all four-wire loop (common anode) LED full-color lighting products, extensive control: all limiting resistor LED lighting products such as: LED module of RGB full-color, LED light strip, SMD soft strips etc. In this mode, the controller can achieve dynamic changing such as: overall jumpy changing, gradually changing, stroboflash. With the phone control software, it can carry out self-defined color changes. Under jumpy changing and stroboflash mode, you can adjust brightness and speed, under gradually changing mode, you can only adjust speed, under static mode, you can only adjust brightness. The default mode table of controller is as below: No. Function Remark No. Function Remark 1 Static red 12 Red stroboflash Brightness 2 Static blue 13 Blue stroboflash and speed is 3 Static green Brightness is 14 Purple stroboflash adjustable 4 Static cyan adjustable,Speed is 15 Green stroboflash 5 Static purple unadjustable 16 Yellow stroboflash 6 Static yellow 17 Cyan stroboflash 7 Static white 18 White stroboflash 8 Three-color jumpy changing Brightness and 19 Red blue gradual Brightness is speed is adjustable changing alternately unadjustable, 9 Seven color jumpy changing 20 Blue green gradual speed is changing alternately adjustable 10 Three-color gradual changing Brightness is 21 Green red gradual unadjustable, speed changing alternately 11 Seven-color gradual changing is adjustable 22 Self-defined color 2. WF400B mode: WF400B mode: When using double channel color temperature strip, user should select this mode. In this mode, Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] the controller can achieve overall color temperature and brightness adjustment. With the phone control software, it can carry out self-defined color temperature and brightness changes. The default mode table of controller is as below: No. Brightness proportion Remark No. Brightness proportion Remark 1 C:0% W:100% 12 C:55% W:45% 2 C:5% W:95% 13 C:60% W:40% 3 C:10% W:90% 14 C:65% W:35% 4 C:15% W:85% 15 C:70% W:30% 5 C:20% W:80% Brightness 16 C:75% W:25% Brightness 6 C:25% W:75% is 17 C:80% W:20% is 7 C:30% W:70% adjustable 18 C:85% W:15% adjustable 8 C:35% W:65% 19 C:90% W:10% 9 C:40% W:60% 20 C:95% W:5% 10 C:45% W:55% 21 C:100% W:0% 11 C:50% W:50% 3. WF400C mode: WF400C mode: When using single color strip, user should select this mode. In this mode, the controller can achieve overall brightness adjustment. With the phone control software, it can carry out self-defined brightness changes. The default mode table of controller is as below: No. Brightness 1 1% 2 5% 3 10% 4 15% 5 20% 6 25% 7 30% 8 35% 9 40% 10 45% 11 50% Remark Brightness proportion No. Brightness 12 55% 13 60% 14 65% 15 70% 16 75% 17 80% 18 85% 19 90% 20 95% 21 100% Remark Brightness proportion 6. Hardware installation description 1. Install ANT ANT's installation drawing: Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] clockwise install WiFi antenna and anticlockwise take down the antenna. 2. Install power supply and LED equipment This connector structure belong to drawer structure, the device interface of power supply and LED is together, four interface one the left side CH3, CH2, CH1, V+is connect led equipment,the fifth interface is connect the anode V+ of power supply, the sixth interface is connect the cathode V_ of power supply. According to the rated voltage of led lamp, we supply power to controller ,and the rated voltage of controller is DC5-24V. As follows: 3. RGB lamps connection diagram Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] When user's lamp is RGB type, you need to set the controller type to WF400A through PC software, the output type is RGB, connect the lamp according to above diagram, then you can use it. 4. Color temperature lamps connection diagram When user's lamp is CW type, you need to set the controller type to WF400B through PC software, the output type is CW, connect the lamp according to above diagram, then you can use it. You can select built-in color temperature proportion of controller through the Function button on the controller or M+, M- button on the touch remote control, also can adjust overall brightness through B+, B- on the remote control or control through mobile phone software. 5. Single color lamps connection diagram Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] When user's lamp is single color type, you need to set the controller type to WF400C through PC software, the output type is DIM, connect the lamp according to above diagram, then you can use it. You can select built-in brightness of controller through the Function button on the controller or M+, M- button on the touch remote control or realize dimming steplessly through mobile phone software. IV. System Application Diagram Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] When there are multiple controllers in user's wireless network, the system structure is as shown in figure 8.1. User can control these controllers separately or in group. In a control system, it can accommodate up to more than 250 controllers, about control mode, please refer to "TouchHome" software instructions. Figure 8.1 V. Notice 1. Please don't install controller in a seal off , high magnetic field or high pressure area; 2. In order to reduce the risk of fire disaster and device damage caused by short circuit , please make sure correct connection;. 3. Please do install controller in a well-ventilated area to insure appropriate temperature . 4. Installation position of controller should be as near as possible to the router so as to ensure controller normal working ; 5. Check out whether the supply voltage and power is in the range of controller required or not . 6. Before power on , please inspect the line is correct connection, and test it whether there is a short circuit ; 7. Any problem , please do not open the shell of controller . 8. This manual is only applicable to this model of controller, if there is an update without notice. VI. Fault Analysis Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219 Kutop international limited www.kutop.com [email protected] No. Phenomenon Reason Solutions 1. out of power 1. check the power 1 Load has no output 2. output is overload 2. increase power amplifier 3. mistakenly connection 3. check the connection 2 Color is not correct Connection of RGB is wrong Check whether RGB connection is corresponding or not Indicator of remote control 3 The battery power is not enough Change battery flicker 1. output cable is too long 2. output cable diameter is too 1. shorten the length of cable With the voltage droping, 4 small 2.use cable with large diameter the voltage is not uneven 3. controller or power supply is 3. increase power amplifier overload VII. After-sale services Within one year that you buy our products, if you operate correctly according to user manual, there is quality problem, we can provide free repair or replacement service, except for the following situations: 1. damage caused by misuse; 2. unauthorized disassembly, repair and modify circuit and incorrect connection; 3. damage caused by transportation, influent; damage caused due to earthquakes, fires, floods and other natural disasters. Address: Unit 04, 7/F, Bright Way Tower, No. 33 Mong Kok Road, Kowloon, Hong Kong TEL: 00852-27935511 FAX: 00852-35902333 Mobile: 0086-15118078219Mac OS X 10.8.4 Quartz PDFContext Word