17058207 001
ICT SZ
[email protected]
Test Report Classic Bluetooth
Shenzhen Chuangwei-RGB Electronics Co., Ltd. NTUDT12 WiFi BT USB2.0 Module 2ANM3NTUDT12 2ANM3NTUDT12 ntudt12
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 23 Pages, 1.32MB
Document DEVICE REPORTGetApplicationAttachment.html?id=6418672Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: Kunden-Referenz-Nr.: Client reference no.: Auftraggeber: Client: Prüfgegenstand: Test item: Bezeichnung / Typ-Nr.: Identification / Type no.: Auftrags-Inhalt: Order content: Prüfgrundlage: Test specification: Wareneingangsdatum: Date of sample receipt: Prüfmuster-Nr.: Test sample no.: Prüfzeitraum: Testing period: Ort der Prüfung: Place of testing: Prüflaboratorium: Testing laboratory: Prüfergebnis*: Test result*: geprüft von: tested by: Datum: Date: 2023-02-28 CN231C12 001 Auftrags-Nr.: Order no.: 168416342 Seite 1 von 23 Page 1 of 23 N/A Auftragsdatum: 2023-02-07 Order date: Shenzhen Chuangwei-RGB Electronics Co., Ltd 13F-16F, Unit A, Skyworth Building, Shennan Road,Nanshan District, Shenzhen, Guangdong, P.R.China WiFi+BT USB2.0 Module NTUD-T12 Test Report CFR47 FCC Part 15: Subpart C Section 15.247 CFR47 FCC Part 15: Subpart C Section 15.207 CFR47 FCC Part 15: Subpart C Section 15.209 2023-02-07 RSS-247 Issue 2 February 2017 RSS-Gen Issue 5 February 2021 T230207021-Y01/01 2023-02-07 to 2023-02-22 Shenzhen Central Standard International Center Co., Ltd. TÜV Rheinland (Shenzhen) Co., Ltd. Refer to Photo Documentation Pass genehmigt von: Hardy authorized by: Lin X Suo X Ausstellungsdatum: Lin Issue date: 2023-02-28 Stellung / Position Sonstiges / Other: Engineer FCC ID: 2ANM3NTUDT12 IC: 23165-NTUDT12 HVIN: NTUD-T12 Stellung / Position Reviewer Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged: * Legende: 1 = sehr gut 2 = gut P(ass) = entspricht o.g. Prüfgrundlage(n) 3 = befriedigend F(ail) = entspricht nicht o.g. Prüfgrundlage(n) 4 = ausreichend N/A = nicht anwendbar 5 = mangelhalt N/T = nicht getestet Legend: 1 = very good 2 = good P(ass) = passed a.m. test specifications(s) 3 = satisfactory F(ail) = failed a.m. test specifications(s) 4 = sufficient N/A = not applicable 5 = poor N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be V05 duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] ·Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Test Summary 5.1.1 ANTENNA REQUIREMENT RESULT: Pass 5.1.2 MAXIMUM CONDUCTED OUTPUT POWER RESULT: Pass 5.1.3 99% BANDWIDTH RESULT: Pass 5.1.4 CONDUCTED SPURIOUS EMISSIONS MEASURED IN 100 KHZ BANDWIDTH RESULT: Pass 5.1.5 RADIATED SPURIOUS EMISSION RESULT: Pass 5.1.6 20DB BANDWIDTH RESULT: Pass 5.1.7 CARRIER FREQUENCY SEPARATION RESULT: Pass 5.1.8 NUMBER OF HOPPING FREQUENCY RESULT: Pass 5.1.9 TIME OF OCCUPANCY RESULT: Pass 5.1.10 CONDUCTED EMISSION ON AC MAINS RESULT: Pass Seite 2 von 23 Page 2 of 23 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 3 von 23 Page 3 of 23 Contents 1 GENERAL REMARKS ...........................................................................................................................4 1.1 COMPLEMENTARY MATERIALS ............................................................................................................4 2 TEST SITES ........................................................................................................................................4 2.1 TEST FACILITIES .................................................................................................................................4 2.2 LIST OF TEST AND MEASUREMENT INSTRUMENTS.................................................................................5 2.3 TRACEABILITY ....................................................................................................................................6 2.4 CALIBRATION .....................................................................................................................................6 2.5 MEASUREMENT UNCERTAINTY.............................................................................................................6 2.6 LOCATION OF ORIGINAL DATA.............................................................................................................6 2.7 STATUS OF FACILITY USED FOR TESTING.............................................................................................6 3 GENERAL PRODUCT INFORMATION ......................................................................................................7 3.1 PRODUCT FUNCTION AND INTENDED USE.............................................................................................7 3.2 RATINGS AND SYSTEM DETAILS ..........................................................................................................7 3.3 INDEPENDENT OPERATION MODES ......................................................................................................9 3.4 NOISE GENERATING AND NOISE SUPPRESSING PARTS .........................................................................9 3.5 SUBMITTED DOCUMENTS.....................................................................................................................9 4 TEST SET-UP AND OPERATION MODES ..............................................................................................10 4.1 PRINCIPLE OF CONFIGURATION SELECTION .......................................................................................10 4.2 TEST OPERATION AND TEST SOFTWARE ............................................................................................10 4.3 SPECIAL ACCESSORIES AND AUXILIARY EQUIPMENT ..........................................................................10 4.4 COUNTERMEASURES TO ACHIEVE EMC COMPLIANCE ........................................................................10 4.5 TEST SETUP DIAGRAM ......................................................................................................................11 5 TEST RESULTS .................................................................................................................................13 5.1 TRANSMITTER REQUIREMENT & TEST SUITES ....................................................................................13 5.1.1 Antenna Requirement ................................................................................................................13 5.1.2 Maximum Conducted Output Power ..........................................................................................14 5.1.3 99% Bandwidth ..........................................................................................................................15 5.1.4 Conducted Spurious Emissions Measured in 100 kHz Bandwidth ............................................16 5.1.5 Radiated Spurious Emission ......................................................................................................17 5.1.6 20dB Bandwidth .........................................................................................................................18 5.1.7 Carrier Frequency Separation ....................................................................................................19 5.1.8 Number of Hopping Frequency ..................................................................................................20 5.1.9 Time of Occupancy ....................................................................................................................21 5.1.10 Conducted Emission on AC Mains ........................................................................................22 6 PHOTOGRAPHS OF THE TEST SET-UP ................................................................................................23 7 LIST OF TABLES................................................................................................................................23 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 1 General Remarks Seite 4 von 23 Page 4 of 23 1.1 Complementary Materials All attachments are integral parts of this test report. This applies especially to the following appendix: Appendix A: Photographs of the Test Set-up Appendix B: Test Results of Test Data 2 Test Sites 2.1 Test Facilities Shenzhen Central Standard International Center Co., Ltd. Room 201, Building 1, Mogen Fashion Industrial Park, No. 10, Shilongzai Road, Xinshi Community, Dalang Street, Longhua District, Shenzhen. CNAS No.: L11671 A2LA No.: 6426.01 FCC Registration No.: 0031378433 IC CAB identifier No.: CN0051 The tests at the test sites have been conducted under the supervision of a TÜV engineer. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 5 von 23 Page 5 of 23 2.2 List of Test and Measurement Instruments Table 1: List of Test and Measurement Equipment Radio Spectrum Testing Equipment Manufacturer Spectrum Analyzer Agilent Power sensor KEYSIGHT Power sensor KEYSIGHT Power sensor KEYSIGHT Power sensor KEYSIGHT Vector Signal Generator Agilent Signal generator Agilent Power sensor Box MWRFtest RF Switch Box MWRFtest MTS 8310 MWRFtest Unwanted Emission Testing Equipment Manufacturer Spectrum Analyzer Agilent Bilog Antenna Schwarzbeck Horn Antenna AARONIAAG Horn Antenna A-INFOMW Loop Antenna Schwarzbeck Amplifier HP Amplifier Agilent 3M Chamber Maor Conducted Emission Equipment Manufacturer EMI Test Receiver R&S LISN R&S Shelding Room Maor EZ-EMC Fara Model N9020A U2021XA U2021XA U2021XA U2021XA N5182A SML03 N/A MW100-RFCB Model N9020A VULB9168 Powerlog 70180 LB-180400-KF FMZB1519B 8447F 8449B 9*6*6 Model No. ESRP3 ENV216 8*4*3 Serial No. MY50200391 MY55080015 MY54250016 MY54250020 MY54210030 MY50140130 100925 N/A N/A V 2.0.0.0 Serial No. MY50200391 VULB9168-250 3980 J211020657 00023 2634A02050 4035A00116 -- Serial No. 101936 100002 -V 3.1 Cal. until Jun. 13, 2023 Jun. 13, 2023 Jun. 13, 2023 Jun. 13, 2023 Jun. 13, 2023 Jun. 13, 2023 Jun. 13, 2023 N/A N/A Cal. until Jun. 13, 2023 Jul. 25, 2025 Jul. 04, 2025 Sep. 26, 2023 Nov. 15, 2023 Jun. 13, 2023 Jun. 13, 2023 Jul. 26, 2023 Cal. Until Jun. 13, 2023 Jun. 13, 2023 May. 03, 2023 Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 6 von 23 Page 6 of 23 2.3 Traceability All measurement equipment calibrations are traceable to NIM (National Institute of Metrology) or where calibration is performed in other countries, to equivalent nationally recognized standards organizations. 2.4 Calibration Equipment requiring calibration is calibrated periodically by the manufacturer or according to manufacturer's specifications. Additionally all equipment is verified for proper performance on a regular basics using in house standards or comparisons. 2.5 Measurement Uncertainty The estimated combined standard uncertainty for radiated emissions and conducted emissions measurements as below table Table 2: Measurement Uncertainty Item Conducted Emission Radiated Emission (30-1000MHz) Radiated Emission (above 1000MHz) Radio Spectrum Field strength (dBµV/m) Field strength (dBµV/m) Extended Uncertainty ± 3.26 dB 4.58dB 5.10dB ± 1.5 dB 2.6 Location of Original Data The original copies of all test data taken during actual testing were attached at Appendix A & B & C of this report and delivered to the applicant. A copy has been retained in the TÜV Rheinland (Shenzhen) file for certification follow-up purposes. 2.7 Status of Facility Used for Testing Shenzhen Central Standard International Center Co., Ltd. Room 201, Building 1, Mogen Fashion Industrial Park, No. 10, Shilongzai Road, Xinshi Community, Dalang Street, Longhua District, Shenzhen Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 3 General Product Information Seite 7 von 23 Page 7 of 23 3.1 Product Function and Intended Use The EUT is a RF Module which supports Bluetooth, 2.4G Wi-Fi 802.11 b/g/n, 5G Wi-Fi 802.11a/n/ac wireless technology. For details refer to the User Manual, Technical Description and Circuit Diagram. Note: This report is for Classic Bluetooth mode only. 3.2 Ratings and System Details Table 3: Technical Specification of EUT General Information of EUT Value Kind of Equipment WiFi+BT USB2.0 Module Type Designation NTUD-T12 Trade Mark / FCC ID 2ANM3NTUDT12 IC 23165-NTUDT12 HVIN NTUD-T12 FVIN T12_3ANT_Golden_WiFi_20221028 Operating Voltage DC 3.3V Technical Specification of Bluetooth Technical Specification Value Operating Frequency 2402 - 2480 MHz Type of Modulation GFSK, /4DQPSK, 8DPSK Channel Number BDR & EDR mode:79 channels Channel Separation BDR & EDR mode:1MHz Wireless Technology Bluetooth 5.0 Antenna Type PIFA Antennai Max. Antenna Gain 2.85 dBi Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 8 von 23 Page 8 of 23 Table 4: RF Channel and Frequency of Bluetooth RF Channel 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 Frequency (MHz) 2402.00 2403.00 2404.00 2405.00 2406.00 2407.00 2408.00 2409.00 2410.00 2411.00 2412.00 2413.00 2414.00 2415.00 2416.00 2417.00 2418.00 2419.00 2420.00 2421.00 RF Channel 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Frequency (MHz) 2422.00 2423.00 2424.00 2425.00 2426.00 2427.00 2428.00 2429.00 2430.00 2431.00 2432.00 2433.00 2434.00 2435.00 2436.00 2437.00 2438.00 2439.00 2440.00 2441.00 RF Channel 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 Frequency (MHz) 2442.00 2443.00 2444.00 2445.00 2446.00 2447.00 2448.00 2449.00 2450.00 2451.00 2452.00 2453.00 2454.00 2455.00 2456.00 2457.00 2458.00 2459.00 2460.00 2461.00 RF Channel 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 -- Frequency (MHz) 2462.00 2463.00 2464.00 2465.00 2466.00 2467.00 2468.00 2469.00 2470.00 2471.00 2472.00 2473.00 2474.00 2475.00 2476.00 2477.00 2478.00 2479.00 2480.00 -- Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 9 von 23 Page 9 of 23 3.3 Independent Operation Modes The basic operation modes are: A. On 1. Bluetooth transmitting mode (BDR & EDR mode) a) Low Channel b) Middle Channel c) High Channel B. On, Transmitting on Hopping channel C. On, Bluetooth connecting mode D. Off 3.4 Noise Generating and Noise Suppressing Parts Refer to Circuit Diagram for further details. 3.5 Submitted Documents - Application Form - Block Diagram - Schematics - Technical Description - FCC/IC Label and Location Info - Photo Document - User Manual Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 4 Test Set-up and Operation Modes Seite 10 von 23 Page 10 of 23 4.1 Principle of Configuration Selection Radio Spectrum: The equipment under test (EUT) was configured at its highest power output in order to measure its highest possible radiation and conducted level. The test modes were adapted accordingly in reference to the instructions for use. Emission: The equipment under test (EUT) was configured to measure its highest possible radiation level. The test modes were adapted accordingly in reference to the instructions for use. 4.2 Test Operation and Test Software Test operation refers to test setup in chapter 5. All testing were performed according to the procedures in ANSI C63.10: 2013. 4.3 Special Accessories and Auxiliary Equipment Table 5: List of Accessories and Auxiliary Equipment Description Notebook Manufacturer DELL Model Vostro 3400 Rating N/A 4.4 Countermeasures to Achieve EMC Compliance The test sample which has been tested contained the noise suppression parts as described in the Technical Construction File (TCF). No additional measures were employed to achieve compliance. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 4.5 Test Setup Diagram Diagram of Measurement Configuration for Radiation Test (Below 30MHz) Seite 11 von 23 Page 11 of 23 Diagram of Measurement Configuration for Radiation Test (Below 1GHz) Diagram of Measurement Configuration for Radiation Test (Above 1GHz) Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 12 von 23 Page 12 of 23 Diagram of Measurement Configuration for Mains Conduction Measurement Diagram of Measurement Configuration for Conducted Transmitter Measurement Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5 Test Results Seite 13 von 23 Page 13 of 23 5.1 Transmitter Requirement & Test Suites 5.1.1 Antenna Requirement RESULT: Test Specification Test standard : FCC Part 15.247(b)(4) and Part 15.203 RSS-Gen Clause 8.3 Pass According to the manufacturer declared, the EUT has an PIFA antenna, the directional gain of antenna is 2.85 dBi, which that use of a non-standard antenna connector and no consideration of replacement. Therefore the EUT is considered sufficient to comply with the provision. Refer to EUT Photo for further details. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 14 von 23 Page 14 of 23 5.1.2 Maximum Conducted Output Power RESULT: Pass Test Specification Test standard Basic standard Limits Kind of test site : FCC Part 15.247(b)(1) RSS-247 Clause 5.4(b) : ANSI C63.10: 2013 FHSS<0.125W(Maximum peak conducted output : power) < 4 W (e.i.r.p.) : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : A.1 : Low / Middle / High : 25 : 53 % : 101 kPa Table 6: Test Result of Maximum Conducted Output Power Test Mode Channel Frequency (MHz) Measured Average Output Power (dBm) (W) Limit (W) 2402 9.27 0.0085 BDR 2441 9.68 0.0093 < 0.125 2480 10.45 0.0111 2402 11.94 0.0156 EDR 2441 12.17 0.0165 < 0.125 2480 12.24 0.0167 Note: The cable loss is taken into account in results and the maximum e.i.r.p. is 12.24 dBm + 2.85 dBi = 15.09dBm which is less than 4W(36dBm). Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.3 99% Bandwidth RESULT: Test Specification Test standard Basic standard Kind of test site : RSS-Gen Clause 6.7 : ANSI C63.10: 2013 : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : A.1 : Low / Middle / High : 25 : 53 % : 101 kPa For the measurement records, refer to the appendix B Seite 15 von 23 Page 15 of 23 Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 16 von 23 Page 16 of 23 5.1.4 Conducted Spurious Emissions Measured in 100 kHz Bandwidth RESULT: Pass Test Specification Test standard Basic standard Limits Kind of test site : FCC Part 15.247(d) RSS-247 Clause 5.5 : ANSI C63.10: 2013 : 20dB (below that in the 100kHz bandwidth within the band that contains the highest level of the desired power); : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : A.1 : Low / Middle / High : 25 : 53 % : 101 kPa Test results of 100kHz Bandwidth of Frequency Band Edge by Conducted method refer to following test plot, and compliance is achieved as well. For the measurement records, refer to the appendix B. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.5 Radiated Spurious Emission RESULT: Test Specification Test standard Basic standard Limits Kind of test site : FCC Part 15.247(d) & FCC Part 15.205 RSS-247 Clause 3.3 : ANSI C63.10: 2013 : Refer to 15.209(a) of FCC part 15.247(d) RSS-Gen Table 6 & Table 7 : 3m Semi-anechoic Chamber Seite 17 von 23 Page 17 of 23 Pass Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : A.1 : Low / Middle / High : 23 : 55 % : 101 kPa Remark: During the pretest the EUT was rotated through three orthogonal axes to determine the attitude that maximizes the emissions. After that the EUT was manually handled to find the orientation that has the maximum emission, which is the orientation shown in the test set-up photos. Testing was carried out within frequency range 9kHz to the tenth harmonics. For the measurement records, refer to the appendix B. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.6 20dB Bandwidth RESULT: Test Specification Test standard Basic standard Kind of test site : FCC Part 15.247(a)(1) RSS-247 Clause 5.1(a) : ANSI C63.10: 2013 : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : A.1 : Low / Middle / High : 25 : 53 % : 101 kPa For the measurement records, refer to the appendix B. Seite 18 von 23 Page 18 of 23 Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 Seite 19 von 23 Page 19 of 23 5.1.7 Carrier Frequency Separation RESULT: Pass Test Specification Test standard Basic standard Limits Kind of test site : FCC Part 15.247(a)(1) RSS-247 Clause 5.1(b) : ANSI C63.10: 2013 : 25kHz or 2/3 of 20dB bandwidth, whichever is greater : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : B : Low / Middle / High : 25 : 53 % : 101 kPa Note: The limit is maximum 2/3 of the 20 dB bandwidth: 868.000 kHz. For the measurement records, refer to the appendix B. Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.8 Number of Hopping Frequency RESULT: Test Specification Test standard Basic standard Limits Kind of test site : FCC part 15.247(a)(1)(iii) RSS-247 Clause 5.1(d) : ANSI C63.10: 2013 : 15 non-overlapping channels : Shielded Room Test Setup Date of testing Input voltage Operation mode Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : B : 25 : 53 % : 101 kPa For the measurement records, refer to the appendix B. Seite 20 von 23 Page 20 of 23 Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.9 Time of Occupancy RESULT: Test Specification Test standard Basic standard Limits Kind of test site : FCC part 15.247(a)(1)(iii) RSS-247 Clause 5.1(d) : ANSI C63.10: 2013 : < 0.4s : Shielded Room Test Setup Date of testing Input voltage Operation mode Test channel Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : DC 3.3V : B : Low / Middle / High : 25 : 53 % : 101 kPa Note: Dwell time = Pulse width x (Hopping rate / Number of channels) x Period Period = 0.4 x 79 (channel) = 31.6 seconds For the measurement records, refer to the appendix B. Seite 21 von 23 Page 21 of 23 Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 5.1.10 RESULT: Conducted Emission on AC Mains Test Specification Test standard Basic standard Frequency range Limits Kind of test site : FCC Part 15.207(a) RSS-Gen Clause 8.8 : ANSI C63.10: 2013 : 0.15 30MHz : FCC Part 15.207(a) RSS-Gen Table 4 : Shielded Room Test Setup Date of testing Input voltage Operation mode Earthing Ambient temperature Relative humidity Atmospheric pressure : 2023-02-07 2023-02-21 : AC 120V, 60Hz : C : Not connected : 23.4 : 60 : 101 kPa For the measurement records, refer to the appendix B. Seite 22 von 23 Page 22 of 23 Pass Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test report no. CN231C12 001 6 Photographs of the Test Set-Up For photographs of the test set-up, refer to the appendix A. Seite 23 von 23 Page 23 of 23 7 List of Tables Table 1: List of Test and Measurement Equipment..................................................................... 5 Table 2: Measurement Uncertainty............................................................................................. 6 Table 3: Technical Specification of EUT ..................................................................................... 7 Table 4: RF Channel and Frequency of Bluetooth ...................................................................... 8 Table 5: List of Accessories and Auxiliary Equipment ............................................................... 10 Table 6: Test Result of Maximum Conducted Output Power..................................................... 14
Related FCC IDs:
- 2ANM3NTUDT12 - Shenzhen Chuangwei-RGB Electronics Co., Ltd. WiFi+BT USB2.0 Module [NTUDT12] Microsoft Word 2016