Federal Communications Commission
MiCOM Labs Inc QMS
FCC Modular Approval Request Rev 3.0-new
Shenzhen Kaadas Intelligent Technology Co., Ltd. ZWLR800 Z-Wave Module 2AQY4ZWLR800 2AQY4ZWLR800 zwlr800
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 2 Pages, 78.81KB
Document DEVICE REPORTGetApplicationAttachment.html?id=8281824Shenzhen Kaadas Intelligent Technology Co., Ltd. Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2025-05-08 Subject; Modular Transmitter Application Company name: Shenzhen Kaadas Intelligent Technology Co., Ltd. FCC ID: 2AQY4ZWLR800 Dear Sir/Madam, This letter includes the FCC application requirements for Modular Transmitter Approval Request for;- FCC KDB 996369 D01 `Module Certification Guide v04r02; and FCC KDB 996369 D03 OEM Manual v01r01 In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 `Module Equip Auth Guide v02'. FCC ID: 2AQY4ZWLR800 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. The module must contain power supply regulation on the module. Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) NO, Has Not a RF shielding. Yes,The modular have buffered modulation/data inputs. Yes,The modular transmitter have its own power supply regulation.(DC 3.3V) The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). The module must demonstrate compliance in a stand-alone configuration. The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. The module must comply with RF exposure requirements Yes,The model number of the replaceable antenna is specified in the manual. Yes,The module was tested in a stand-alone configuration, please refer to the Setup Photo for the detail Yes,Please refer to label sample exhibit - host labeling is described in integration manual Yes,The required FCC rule has been fulfilled and all the instructions for the maintaining compliance have been clearly stated in the User Manual. Yes,The MPE evaluation with 20cm distance restriction is submitted for the compliance of RF Exposure requirement. FCC Modular Approval Request Rev 3.0 Shenzhen Kaadas Intelligent Technology Co., Ltd. Integration Instructions for host product manufacturers The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01r01. These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host product. Any requirements that are not applicable to the Module are as indicated below. Summary of requirements and Checklist. Refer to the KDB for description of the complete requirements; KDB Requirements of KDB 996369 D03 Ref Sect 2.2 List of applicable FCC rules User Manual Page Number reference Page 15 2.3 Summarize the specific operational use conditions 2.4 Limited module procedures Page 15 Page 15 2.5 Trace antenna designs Page 16 2.6 RF exposure considerations 2.7 Antennas Page 16 Page 16 2.8 Label and compliance information Page 17 2.9 Information on test modes and additional testing requirements Page 18 2.10 Additional testing, Part 15 Subpart B disclaimer 2.11 Note EMI Considerations Page 18 Page 18 2.12 How to make changes Page 18 Name: Jing Rao Title: Manager Signature of applicant Date: 2025-05-08 FCC Modular Approval Request Rev 3.0
Related FCC IDs:
- 2AQY4ZWLR800 - Shenzhen Kaadas Intelligent Technology Co., Ltd. Z-Wave Module [ZWLR800] WPS 文字