MS100-User Manual

TP-Link Technologies Co., Ltd. MS100 Smart Motion Sensor TE7MS100 TE7MS100 ms100

MS100 MS100-User Manual (Smart Motion Sensor) by TP-Link Technologies

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 13 Pages, 2.41MB

Document DEVICE REPORT1f693a8e35d3e07699b6cf2dc913f7092ef00c7d
User Guide
Smart Motion Sensor

1910012158 REV1.0.0

Contents
About This Guide····················································· 1 Introduction································································ 2 Appearance································································ 3 Set Up Your Motion Sensor································ 4 Main Pages·································································· 6 Authentication··························································· 7

About This Guide
This guide provides a brief introduction to Motion Sensor and the Kasa app, as well as regulatory information. Please note that features of Motion Sensor may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.

Conventions
In this guide, the following convention is used:

Convention Description

Teal

Key information appears in teal, including management page text such as menus, items, buttons and so on.

Underline Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info
· Specific product information can be found on the product page at http://www.tp-link.com. · · The latest firmware and management app are available from Download Center at http://www.tp-link.com/support. · A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com. · Our Technical Support and troubleshooting information can be found at http://www.tp-link.com/support.

1

Introduction
With Motion Sensor connected to your Kasa Smart Home Router, your home can use motion sensing to become even smarter, and that makes your life simpler. You can set your home in motion with Kasa app including: · Smart Lighting Control - Automatically turn smart lights on/off · Occupancy Sensing - Enhance security and save enrgy whenever you're away · Remote Notification - Be notified of activity at home no matter where you are · Simple Setup - Easily connects to your Kasa Smart Home Router
2

Appearance
Motion Sensor has an internal LED that changes color according to its status, a sensor, a battery compartment and a wall mount. See the explanation below:

Wall Mount Sensor

Battery Compartment
Restart/Reset Button: Press for 1 second to restart the pairng mode. Press and hold for 5 seconds to reset the sensor to factory default settings.

Orange Power up or fail to join the network.
Blue Sensor event or succeed to join the network.
Flashing orange Factory resetting the sensor.
Flashing orange and blue Searching for the network or joining the network.

3

Set Up Your Motion Sensor
Follow the steps below to set up your Motion Sensor via Kasa for Mobile app.

1. Download and install the Kasa app
go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet.

2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don't have a TP-Link ID, tap Create Account. The Kasa app will guide you through the rest.

3. Place the sensor
Take your sensor to the location you would like to monitor. For best results, place it about six feet high. Don`t affix it yet.

4

Set Up Your Motion Sensor
Follow the steps below to set up your Motion Sensor via Kasa for Mobile app.

4. Connect to Smart Home Router
Remove the screw securing the wall mount and slide the cover down.
Insert two batteries to enter pairing mode.

5. Install the sensor if needed
It is all set up. You can install the sensor to the wall if needed. The Kasa app will guide you through the whole process of installation.

5

Main Pages
After you successfully set up your Motion Sensor, you will see the home page of the Kasa app. Here you can view the working status of all devices that you've added to Kasa and manage them. Tap on a sensor to check the current status, time of last motion, the current battery level of your sensor. Click
on sensor status page to view your device settings.

Home Page

Sensor Status

Device Settings

6

Authentication

COPYRIGHT & TRADEMARKS

Specifications are subject to change without notice.

is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product

names are trademarks or registered trademarks of their respective holders.

No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2017 TP-Link Technologies Co., Ltd. All rights reserved.

7

FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter."
8

CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1. l'appareil ne doit pas produire de brouillage; 2. l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
9

Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements:
     .
NCC Notice & BSMI Notice: 
      

·  ·  ·  ·  ·  · 
             ,      .
10

Safety Information · When product has power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to
completely shut off power is to disconnect the product or the power adapter from the power source. · Don't disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service,
please contact us. · Avoid water and wet locations.

Explanation of the symbols on the product label

Symbol

DC voltage

Explanation

Indoor use only

RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.

11



Related FCC IDs:

Search Any Device: