Enviroflo-GR-Series-Heat-Pump-Warranty-Booklet.
EHPA340VM AR-and-GR-Series-Warranty Booklet.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 8 Pages, 482.14KB
Document DEVICE REPORT2aaa3f73e1fa3f90110f25c0617f1b29c3cee324 EHPA300VM AR and GR Series Warranty BookletAR Series (EHPA) GR Series (EHPG ) Enviroflo - Electric Heat Pump Water Heaters Warranty Booklet Rinnai Series Electric Heat Pump Water Heater Product Warranty Warranty Terms The warranty terms in this publication apply only to EHPA and EHPG, Electric Heat Pump Water Heater models: EHPA300VM EHPA300VMH EHPA340VM EHPA340VMH EHPG215VM EHPG250VM EHPG250VMP EHPG265VM EHPG265VMT EHPG280VM EHPG300VM The benefits to the consumer given by this warranty are in addition to all other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage caused by the product, and not the installation. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Rinnai will repair or provide parts for repair or replacement, in the event of product defects arising from faulty materials and/or Rinnai workmanship, in accordance with the Warranty Terms in Tables 1 and 2, Definitions, Warranty Conditions and Exclusions stated in this document. Rinnai is responsible for reasonable costs associated with legitimate warranty claims, if and when validated by Rinnai. This includes call-out of an authorised Rinnai service provider to inspect the product. Rinnai is not responsible for: (a) any costs that are not pre-approved in writing by Rinnai Australia (b) any costs associated with a product which is determined upon inspection not to be covered by this warranty. The consumer will be reimbursed by Rinnai for any reasonable costs associated with making a legitimate warranty claim against Rinnai which are not otherwise specified above. Enquiries relating to warranty coverage and claims for Rinnai products or services must be made by contacting Rinnai Australia. Authorised Rinnai service providers can repair or replace product components, subject to Rinnai warranty terms and conditions. Rinnai Australia can, in addition, provide information on operation and maintenance of Rinnai products. Rinnai Australia contact details are on the back of this document. 2 Rinnai Electric Heat Pump Water Heaters Warranty Booklet TABLE 1 - PARTS AND LABOUR WARRANTY PERIODS (YEARS) EHPA & EHPG SERIES ELECTRIC HEAT PUMP WATER HEATERS Rinnai Electric Heat Pump Water Heaters Eniviroflo AR & GR series (EHPA & EHPG) Cylinder* Refrigeration Components (1) Other Components (2) Domestic Use Parts Labour (3) 7 Years 3 Years 3 Years 3 Years 1 Year 1 Year Commercial Use Parts Labour (3) 1 Year 1 Year 1 Year 1 Year 1 Year 1 Year (1) Refrigeration Components include but are not limited to: compressor, condenser, expansion valve, heat exchanger, evaporator and associated pipe work. (2) Other Components include but are not limited to: sensors, thermostats, valves, electric heating elements, anodes. (3) No repair labour warranty applies to any component, refrigeration and cylinder warranties outside the specified Labour Warranty period. * Inner Storage Cylinder Notwithstanding the above periods in Table 1, a 5-year whole-of-product `Parts and Labour' warranty is offered for domestic use where a hot water rebate has been received under the Solar Victoria Solar Homes Program for domestic installations from 1 July 2023. For further details, contact Rinnai on 1300 555 545. Rinnai Electric Heat Pump Water Heaters Warranty Booklet 3 Definitions Domestic Use: The warranty periods that are allocated under "Domestic Use" are based on hot water usage patterns of a typical family, for personal hygiene use. Rinnai "Domestic Use" warranty periods apply to: 1. Water heaters installed to supply heated water to single family domestic dwellings. 2. Water heaters installed to supply heated water to commercial installations such as motel units, hotel rooms, caravans, mobile homes, nursing homes, retirement village complexes and other care institutions and like accommodation provided that maximum delivery temperatures do not exceed 70ºC and that the hot water systems are not installed as component(s) of centralised bulk hot water systems and the installation does not incorporate building flow and return systems. Commercial Use: The warranty periods that are allocated under "Commercial Use" are for all other applications other than domestic use and include premises such as commercial and industrial buildings, schools, cafes, hotels, caravan parks and sporting complexes, but not limited to these. Rinnai "Commercial Use" warranty applies to: 1. Water heater(s) supplying central shower blocks. 2. Water heater(s) supplying kitchens used for the bulk preparation of food. 3. Water heater(s) delivery temperatures preset to exceed 70°C. 4. Water heater(s) used in commercial or industrial heating processes. 5. Water heater(s) used in hydronic space heating installations. 6. Any application that uses Rinnai water heater(s) in conjunction with building flow and return systems. 7. Water heater(s) installed as component(s) of centralised bulk hot water system(s) 4 Rinnai Electric Heat Pump Water Heaters Warranty Booklet Warranty Conditions 1. Warranty and the extended warranty applies to products which are manufactured on or after the date of publication of this warranty but before the next date of publication of this warranty. 2. All terms of this warranty are effective from date of completion of installation of the appliance(s) and the attending service person reserves the right to verify this date by requesting proof of purchase or a copy of the certificate of compliance prior to the commencement of any warranty work. Where the date of completion of installation is not known, then this warranty will commence 2 months after the date of manufacture. The date of manufacture is stated on the dataplate of the appliance. Note: Certificates of compliance must be issued by the installer by law in all States and Territories of Australia. 3. All Rinnai water heating components must be installed, commissioned, serviced, repaired and removed in accordance with the manufacturer's installation instructions, current AS/NZS 3000, AS/NZS 3500, AS/NZS 5601, local regulations and municipal building codes by persons authorised by local regulations to do so. 4. All Rinnai water heaters must be operated and maintained in accordance with manufacturer's operating instructions. 5. The warranty applies only to the components supplied by Rinnai. It does not apply to components supplied by others, such as pressure limiting valves, isolating valves, non return valves, electrical switches, pipework, electrical cables and fuses, but not limited to these. 6. Any inspection, service, repair or replacement activities associated with warranty on Rinnai products must be authorised by Rinnai Australia before commencement. 7. Where the appliance has not been sited in accordance with the installation instructions or installed such that safe assessment or service access requires machinery or is difficult, a service charge will apply. If at the discretion of the attending service person, access is deemed dangerous, service will be refused. Any work required to gain reasonable or safe access to the appliance will be chargeable by the attending service person (for example, removal of cupboards, doors, walls, or the use of special equipment to move the appliance or components to floor level, perform diagnostics, but not limited to these). 8. Where a failed appliance or component is replaced under warranty, the balance of the original appliance warranty will remain effective. The replacement part or appliance does not carry a new warranty. Rinnai Electric Heat Pump Water Heaters Warranty Booklet 5 9. Rinnai may at its sole discretion, return any removed product or component to the factory for inspection. 10. This warranty applies to water heaters connected to a water supply where the water chemistry and impurity levels do not exceed any of the limits specified in Table 2. The water supply from water utilities generally complies with these requirements. However, where water sources change, or any history of uncertainty exists, water quality must be tested, or otherwise treated, to comply with these specifications. TABLE 2 - WATER CHARACTERISTICS Rinnai Water Heater Total Dissolved Solids (TDS) Hardness (as CaCO3) Saturation Index pH System Type mg/Litre or ppm mg/Litre (Langelier) or ppm Dissolved CO2 mg/Litre or ppm Chlorides mg/Litre or ppm Electric Heat Pump Water Heaters 2500* 200 +0.4 to -1.0 5.5 to Not @ 65°C 9.5 Applicable 300 *For TDS levels up to and including 600mg/litre the Rinnai magnesium based anode is to be used. This is the anode fitted during manufacture of the cylinder. For TDS levels greater than 600mg/litre and not exceeding 2500mg/litre the Rinnai aluminium based anode is to be used. This anode can be fitted by Rinnai or an authorised person. This warranty does not apply if the TDS exceeds 2500mg/litre. Warranty Exclusions No warranties except those implied and that by law cannot be excluded are given by Rinnai in respect of Goods supplied. Where it is lawful to do so the liability of Rinnai for a breach of a condition or warranty is limited to the repair or replacement of the Goods, the supply of equivalent Goods, the payment of the cost of repairing or replacing the Goods or acquiring equivalent Goods as determined by Rinnai. All hot water systems The following exclusions apply to all Rinnai water heating systems. They may cause the warranty to become void and will result in a service charge and costs of parts (if required): 1. Accidental damage and acts of God. 2. Failure due to abuse or misuse, improper maintenance or failure to maintain. 6 Rinnai Electric Heat Pump Water Heaters Warranty Booklet 3. Failure due to incorrect or unauthorised installations. 4. Failure, damage and associated costs resulting from product alterations, service or repair work or methods not authorised by Rinnai. 5. Where it is found that there is no functionality fault with the water heater and the issues are related to the plumbing installation or are due to the failure of water, electric or gas supplies. 6. Where exposed to corrosive atmosphere, salt-affected or coastal environments; and including exposure causing superficial discolouration and aging that is immaterial to the performance and reliability of the product. 7. Where the water heater has failed directly or indirectly as a result of excessive water pressure, negative water pressure (partial vacuum) or water pressure pulsation. 8. Operating the water heater and components when not completely filled with water. 9. This warranty does not apply to water heaters connected to water supplies if the water chemistry and impurity levels exceed the limits specified in Table 3. Examples of water supplies where chemistry and impurity levels may exceed the limits specified in Table 3 include but are not limited to private bores, private dams and water from water utilities where the chemistry is deliberately altered by parties other than the water utility before supplying the water heater. 10. This warranty only applies to water heaters connected to the energy source listed on the data label of the appliance. 11. This warranty does not apply to damage caused by sludge and/or sediment in the water supply nor corrosion due to stray electrical currents affecting the associated piping. 12. This warranty does not apply to colour degradation/damage caused by direct UV exposure. 13. This warranty does not apply for ice formation in the plumbing of the water heater, or related damage, where the electricity supply has failed or been switched off. 14. Labour costs incurred due to a Rinnai Service person or service agent performing checks which should have been carried out by the customer in accordance with the Customer Instructions and where no defect is found. 15. Faults resulting from drilling, screwing or fixing any ancillary items to the outer case of the tank.This product is fitted with a high efficiency heat exchanger attached to the inner cylinder, anything penetrating the outer skin of the tank may damage the heat exchanger. Rinnai Electric Heat Pump Water Heaters Warranty Booklet 7 innai Australia Pty Ltd ABN 74 005 138 769 | AU45204 100 Atlantic Drive, Keysborough, Victoria 3173 P.O. Box 460, Braeside, Victoria 3195 Tel: (03) 9271 6625 National Help Line Tel: 1300 555 545* Monday to Friday, 8.00 am to 5.00 pm EST. After Hours Hot Water Service Line Tel: 1800 000 340* *Cost of a local call may be higher from a mobile phone. (National calls from public phones in Australia are free). For further information visit www.rinnai.com.au or email [email protected] Rinnai has a Service and Spare Parts network with personnel who are fully trained and equipped to give the best service on your Rinnai appliance. If your appliance requires service, please call our National Help Line. With our policy of continuous improvement, we reserve the right to change, or discontinue at any time, specifications or designs without notice. S112878 ISSUE A - SEPT 2024Adobe PDF Library 17.0 Adobe InDesign 19.5 (Windows)