Federal Communications Commission

MiCOM Labs Inc QMS

Modular Approval Letter Attestation Letter

REOLINK TECHNOLOGY PTE. LTD. 2503G WiFi module 2BN5S-2503G 2BN5S2503G 2503g

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 123.42KB

Document DEVICE REPORTGetApplicationAttachment.html?id=8365166 
REOLINK TECHNOLOGY PTE. LTD.

Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA

Date: 2025/05/20

Subject; Modular Transmitter Application

Company name: REOLINK TECHNOLOGY PTE. LTD. FCC ID: 2BN5S-2503G

Dear Sir/Madam,

This letter includes the FCC application requirements for Modular Transmitter Approval Request for;-

FCC KDB 996369 D01 `Module Certification Guide v02; and FCC KDB 996369 D03 OEM Manual v01

In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 `Module Equip Auth Guide v02'. FCC ID :2BN5S-2503G has been examined against the following requirements.

Requirement per 15.212 and KDB 996369 D01
The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal.
The module must contain power supply regulation on the module.

Explanation from Grantee
(do not write yes/no, but explain why product complies/how it is achieved) Yes, It has a shield
Yes, This module have buffered modulation/data inputs .
Yes, The module have power supply regulation, The supply voltage is DC 3.3V.

The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b).
The module must demonstrate compliance in a stand-alone configuration.
The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748).
The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee.
The module must comply with RF exposure requirements

Yes, This module includes the adoption of the IPEX interface, meeting the requirements of this section.
Yes, This module is a stand-alone configuration.
Yes, The module have label in a visible area indicated the following texts: " FCC ID: 2BN5S-2503G
Yes, This module meets the requirements of FCC part 15C(15.247, 15.407).
Yes, This module complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with a

FCC Modular Approval Request Rev 3.0

REOLINK TECHNOLOGY PTE. LTD.
minimum distance of 20 centimeters between the radiator and your body." This module is designed to comply with the FCC statement, FCC ID is: 2BN5S-2503G
Integration Instructions for host product manufacturers
The following items are submitted in support of application for Modular Transmitter FCC ID as noted above as required by the FCC KDB 996369 D03 OEM Manual v01.
These items are provided as integration instructions for host product manufacturers (e.g., OEM instruction manual) to use when integrating a module in a host productro.
Any requirements that are not applicable to the Module are as indicated below.
Summary of requirements and Checklist.
Refer to the KDB for description of the complete requirements.

Name: Chen Yasmine

Date: 2025/05/20

Title: Manager Signature of applicant

FCC Modular Approval Request Rev 3.0

Related FCC IDs:

Search Any Device: