Assembly Manual PDF
Manual Desk Converter – VIVO - desk solutions, screen mounting, and more
Desk Converters – VIVO - desk solutions, screen mounting, and more
Desk Converters – Tagged "Color White"– VIVO - desk solutions, screen mounting, and more
Instruction Manual for V I V O models including: DESK-V000KL Desk Converter, DESK-V000KL, Desk Converter, Converter
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 4 Pages, 2.39MB
Document DEVICE REPORTDESK-V000KL REV3 online ?v=1660048428Black Corner Desk Riser Instruction Manual SKU: DESK-V000KL Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v000kl GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST [email protected] www.vivo-us.com Chat live with an agent! 309-278-5303 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use. PACKAGE CONTENTS A (x1) Desk B (x1) Keyboard Tray TOOLS NEEDED C (x2) Cable Clip D (x3) Foam Pad E (x4) Foot Pad S-A (x4) Sleeve Nut with Screw Scissors Phillips Screwdriver DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. 33 lbs (15kg) Desk 4.4lbs (2kg) Keyboard Tray WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. ASSEMBLY STEPS STEP 1 Separate Sleeve Nut with Screw (S-A) into Sleeve Nut (S-A1) and Screw (S-A2). S-A S-A1 S-A2 STEP 2 Apply Pads (D) to underside of Keyboard Tray (B). Press Sleeve Nuts (S-A1) into holes on top of Keyboard Tray (B). S-A1 D B STEP 3 Press Foot Pads (E) into holes in base of Desk (A). Cut the large plastic ties on bottom of Desk (A). A CAUTION: Do not squeeze the release handle with the desk in a sideways or upside-down position. E 2 STEP 4 Place Desk (A) right-side up on a table. Raise the desk by squeezing the handle underneath the desktop. A Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using Screws (S-A2) and a Phillips screwdriver. A S-A2 B Apply Cable Clips (C) to underside of desk assembly. C Grommet Mount If installing a grommet compatible monitor mount, remove the plastic cap from the rear-center of the desktop. Install the mount to the open hole according to the mount's directions. CAUTION! Keep monitor and laptop base fully on the desktop. Follow the cable routing instructions to avoid the potential to pinch cables. Leave enough slack in cable to allow for full range of vertical motion (15" / 38 cm). Raise desktop slowly to keep items stable. Failure to follow these instructions may result in property damage and/or personal injury. 3 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED:08/08/2022 REV3 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S [email protected] AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
38" Corner Standing Desk Converter – VIVO - desk solutions, screen mounting, and more