复件 HKA00505010-XG-料号-产品规格书
duanll
客户承认书
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 15 Pages, 852.37KB
Document DEVICE REPORT0000000158SHENZHEN HUNTKEY ELECTRIC CO., LTD SPECIFICATION FOR APPROVAL CUSTOMER/ CUSTOMER P.N./ MODEL NO./ HKA00505010-XG APPROVAL NO./ WI-F-20120837 PREPARED DATE/ 2012-8-10 CUSTOMER AUTHORIZED SIGNATURE/ Please return to us one copy of "SPECIFICATION FOR APPROVAL"with you approved signature./ /. ADD: Huntkey Park,Banxue Road,Bantian,Shenzhen, Guangdong, P. R. China TEL: 0755-89606666 P.C.: 518129 FAX: 0755-89606333 http://www.huntkey.com Page 1 SHENZHEN HUNTKEY ELECTRIC CO., LTD E. C. LIST/ Rev. Description of Change/ Before/ After/ Changed Date/ ECN No. 1 Original Release 50mohm 2012-8-10 --- Page 2 SHENZHEN HUNTKEY ELECTRIC CO., LTD ** Table Of Content/ ** 1. SCOPE/.....................................................................................................................................4 2. Input Characteristics/........................................................................................................4 3. Output Characteristics/ .....................................................................................................4 4. Protection Requirements/ .................................................................................................6 5. Environment Requirements/ .............................................................................................6 6. Reliability Requirements/.............................................................................................7 7. EMI/EMS Standards/EMI/EMS ..............................................................................................7 8. Safety Standards/ ..............................................................................................................7 9. Mach. Outline Drawing/ .......................................................................................................9 10. Packing Drawing/ ...............................................................................................................15 Page 3 SHENZHEN HUNTKEY ELECTRIC CO., LTD 1. SCOPE/ The document detail the electrical, mechanical and environmental specifications of a SMPS, the power supply provide 5.0 W continuous output power. 5.0W(),. The power supply shall meet the RoHS requirement. RoHS . Description/ SMPS Adaptor (Wall mount)/ SMPS Adaptor(Desk-top)/ Open Frame/ SMPS Unit (With Case)/ Others/ 2. Input Characteristics/ 2.1. Input Voltage & Frequency/ The range of input voltage is from 90Vac to 264Vac single phase. 90Vac 264Vac, . Minimum/ Normal/ Maximum/ Input Voltage/ 90Vac 100Vac~240Vac 264Vac Input Frequency/ 47Hz 2.2. Input AC Current/AC 60Hz/50Hz 63Hz 0.2Amax. @ 115Vac input & Full load/ 115Vac 0.2A 0.2Amax. @ 230Vac input & Full load/ 230Vac 0.2A 2.3. Inrush Current (cold start)/() 30Amax. @ 220Vac input/ 220Vac 30A 2.4. Average Efficiency / While input 115Vac and 230Vac,the average efficiency is more than 68.17%.The test point is at 25%,50%,75% and 100% of max load respectively. 115Vac 230Vac 68.17% 25%,50%,75% 100% 2.5.No-Load INPUT POWER DISSIPATION Input 90Vac or 264Vac ,output no load, the input power loss is less than 0.15W. 90/264V 0.15W 2.6. Flow Backward Electric Current Tests When cut down AC power ,input 0--5V DC power into charger, The current should less than 5mA. , 0--5VDC , 5mA. 3. Output Characteristics/ 3.1. Static Output Characteristics <Vo & R+N>/ Page 4 SHENZHEN HUNTKEY ELECTRIC CO., LTD Output Rail Rated Load/ Rated. Range Output Range Load CV2.0-4.75V R+N Remark +5.0V 1.0A 1.0-1.3A 4.75V ~ 5.25V 120mVp-p 1.Load range CVUnder the input Voltage 100 Vac~240Vac. CV 100Vac~240Vac 2. Under the input Voltage 100 Vac 100Vac Ripple & Noise: Measurement is done by 20MHz bandwidth oscilloscope and the output paralleled a 0.1uF ceramic capacitor and a 10uF electrolysis capacitor. : 20MHz , 0.1uF 10uF . Charger Output Voltage/Current Characteristics / V-I 5.25 4.75 2. 0 1000 1300 3.2. Turn - on Delay Time/ 3S max. @ 100 Vac to 240Vac input & Full load/ 100Vac-240Vac 3S 3.3. Hold-up Time/ 10mS min. @ Full load &115Vac/60Hz input turn off at worst case 115Vac/60Hz , 10mS 20mS min. @ Full load &230Vac/50Hz input turn off at worst case 230Vac/50Hz , 20mS 3.4. Rise Time/ 30mS max. @ 70% load/70% 30mS Page 5 SHENZHEN HUNTKEY ELECTRIC CO., LTD 3.5. Fall Time/ 20mS max. @ Full load/ 20mS 3.6. Output Overshoot / Undershoot// 10% max. When the power on or off// 10% 3.7. Output Load Transient Response/ 1>. output voltage within 4.5-5.5V for load step from 0% to50%, R/S: 0.5A/uS, frequency: 100Hz duration and 8mS at 50%. 4.5-5.5V ,: 0% 50%,: 0.5A/uS,: 100Hz, 50% 8mS. 3.8. Capacitance Load/ While input 100~240Vac and capacitance load is 2200uF, the adapter can turn on normally and the output is in the rated range. 100~240Vac2200uF 4. Protection Requirements/ 4.1. Over Current Protection/ OCP Point Limited: 200%max of Io-rated /: 200% The output shall hiccup when the over current applied to the output, and shall be self-recovery when the fault condition is removed ,,, 4.2. Short Circuit Protection/ The input power shall decrease when the output rail short, the power supply shall no damage, and shall be self-recovery when the fault condition is removed. ,,, 4.3. Over Voltage Protection/ OVP Point Limited: 7.5VMax. Load/: 7.5V The power supply shall be protected when the output is over voltage, and the power supply shall not be damaged. , 5. Environment Requirements/ 5.1. Operating Temperature and Relative Humidity// 0 to +40 20%RH to 80%RH 5.2. Storage Temperature and Relative Humidity// -40 to +70 5%RH to 95%RH non-condensing @ Sea level shall be low 10,000 feet/ 10,000 5.3. Vibration/ 10 to 300Hz sweep at a constant acceleration of 1.0G(Breadth: 3.5mm) for 1Hour for each of the perpendicular axes X, Y, Z : 10 to 300Hz, : 1.0G(: 3.5mm), X, Y, Z 1 Page 6 SHENZHEN HUNTKEY ELECTRIC CO., LTD 5.4. Drop in/ 1 Corner, 3 Edges, 6 Surfaces, Height: 100cm, On the cement plane 1 , 3 , 6 , : 100 , 6. Reliability Requirements/ 6.1. Burn-in/ The power supply shall under go a minimum of 4 Hours burn-in test at 40 ± 5 under full load condition 40 ± 5 4 6.2. MTBF Qualification/ The MTBF shall be at least 50,000hours at 25,80% Full load and nominal input condition : 50,000 ,25 80% 7. EMI/EMS Standards/EMI/EMS 7.1. EMI Standards/EMI EN 55022:1998, +A1:2000 +A2:2003, Class B CISPR 22:2003, Class B AS/NZS CISPR 22: 2004, Class B 7.2. EMS Standards/EMS EN 61000-3-2 Harmonic current emissions EN 61000-3-3 Voltage fluctuations & flicker EN 61000-4-2 Electrostatic Discharge(ESD): 8kV air discharge, 6kV contact discharge EN 61000-4-3 Radio-Frequency Electromagnetic Field Susceptibility Test-RS EN 61000-4-4 Electrical Fast Transient/Burst-EFT EN 61000-4-5 Surge Immunity Test: Differential mode ±1kV, Common mode ±2kV EN 61000-4-6 Conducted Radio Frequency Disturbances Test-CS EN 61000-4-8 Power Frequency Magnetic Field Test EN 61000-4-11 Voltage Dips 8. Safety Standards/ 8.1. Dielectric Strength(Hi-pot)/() Primary to Secondary: 3000Vac / 3.5mA / 60second(3second for production) or 4242Vdc / 3.5mA / 60second(3second for production) : 3000Vac / 3.5mA / 60 (: 3 ) 4242Vdc / 3.5mA / 60 (: 3 ) 8.2. Leakage Current/ 0.25mAmax. at 250Vac / 50Hz/ 250Vac/50Hz 0.25mA 8.3. Insulation Resistance/ 100M min. at primary to secondary add 500Vdc test voltage Page 7 SHENZHEN HUNTKEY ELECTRIC CO., LTD 500Vdc 100 M 8.4. Regulatory Standards/ Type UL/CUL TUV CCC CE C-Tick Country USA Europe China Europe Australia Standard UL60950-1 EN60950-1 GB4943 EN60950-1 AS/NZS 3548 Type PSB PSE NOM GOST Country Standard Singapore IEC60950-1 Japan J60950 Mexico NOM-001 Russia MEK60950 Page 8 SHENZHEN HUNTKEY ELECTRIC CO., LTD 9. Mach. Outline Drawing/ Page 9 SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 10 SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 11 SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 12 SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 13 SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 14 10. Packing Drawing/ SHENZHEN HUNTKEY ELECTRIC CO., LTD Page 15Acrobat Elements 7.0.5 (Windows)