陈司林

TF100 Test Report EMF WT228002410

Shenzhen Jiancheng Yunshi Technology Co., Ltd TF100 2A82ETF100 2A82ETF100 tf100

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 9 Pages, 178.17KB

Document DEVICE REPORTGetApplicationAttachment.html?id=6554513
FCC TEST REPORT
For
Team Free Model Number: TF100 FCC ID: 2A82ETF100

Report Number : WT228002410

Test Laboratory
Site Location
Tel Fax Web E-mail

: Shenzhen Academy of Metrology and Quality Inspection
: NETC Building, No.4 Tongfa Rd., Xili, Nanshan, Shenzhen, China
: 0086-755-86928965 : 0086-755-86009898-31396 : www.smq.com.cn : [email protected]

Report No.: WT228002410

Page 1/9

Revision History

No

Date

V1.0 2023.02.06

Remark Initial issue

Report No.: WT228002410

Page 2/9

Applicant Address Manufacturer Address EUT Description Model No Trade mark
FCC ID

TEST REPORT DECLARATION

: Shenzhen Jiancheng Yunshi Technology Co., Ltd

:

A2101, Building 9, Zone 2, No. 3609 Baishi Road, Nanshan District, Shenzhen

: Shenzhen Jiancheng Yunshi Technology Co., Ltd

:

A2101, Building 9, Zone 2, No. 3609 Baishi Road, Nanshan District, Shenzhen

: Team Free

: TF100

: TELE System

: 2A82ETF100

Test Standards:

FCC Part 2.1091
The EUT described above is tested by Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory to determine the maximum emissions from the EUT. Shenzhen Academy of Metrology and Quality Inspection EMC Laboratory is assumed full responsibility for the accuracy of the test results. The test report is valid for above tested sample only and shall not be reproduced in part without written approval of the laboratory.

Project Engineer:
Checked by:
Approved by:

(Chen Silin ) (Wan Xiaojing ) (Lin Yixiang )

Date: Date: Date:

Feb.06, 2023 Feb.06, 2023 Feb.06, 2023

Report No.: WT228002410

Page 3/9

TABLE OF CONTENTS
TEST REPORT DECLARATION ........................................................................................................3 1. TEST RESULTS SUMMARY ...................................................................................................5 2. GENERAL INFORMATION.......................................................................................................6 3. PRODUCT DESCRIPTION.......................................................................................................7
3.1. EUT Description..............................................................................................................7 4. RF EXPOSURE ..........................................................................................................................8
4.1. LIMIT FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE)...................................8 4.2. MPE Calculation Method...............................................................................................8 4.3. CALCULATED RESULT ...............................................................................................8

Report No.: WT228002410

Page 4/9

1. TEST RESULTS SUMMARY

Test Items

Table 1 Test Results Summary

RF Exposure Remark: "N/A" means "Not applicable."

Test Results Pass

Report No.: WT228002410

Page 5/9

2. GENERAL INFORMATION
2.1. Report Information This report is not a certificate of quality; it only applies to the sample of the specific product/equipment given at the time of its testing. The results are not used to indicate or imply that they are application to the similar items. In addition, such results must not be used to indicate or imply that SMQ approves recommends or endorses the manufacture, supplier or use of such product/equipment, or that SMQ in any way guarantees the later performance of the product/equipment.
The sample/s mentioned in this report is/are supplied by Applicant, SMQ therefore assumes no responsibility for the accuracy of information on the brand name, model number, origin of manufacture or any information supplied.
Additional copies of the report are available to the Applicant at an additional fee. No third part can obtain a copy of this report through SMQ, unless the applicant has authorized SMQ in writing to do so.
The lab will not be liable for any loss or damage resulting for false, inaccurate, inappropriate or incomplete product information provided by the applicant/manufacturer.
2.2. Laboratory Accreditation and Relationship to Customer The testing report were performed by the Shenzhen Academy of Metrology and quality Inspection EMC Laboratory (Guangdong EMC compliance testing center), in their facilities located at NETC Building, No.4 Tongfa Rd., Xili, Nanshan, Shenzhen, China. At the time of testing, Laboratory is accredited by the following organizations:
China National Accreditation Service for Conformity Assessment (CNAS) accredits the Laboratory for conformance to FCC standards, EMC international standards and EN standards. The Registration Number is CNAS L0579.
The Laboratory is Accredited Testing Laboratory of FCC with Designation number CN1165 and Site registration number 582918.
The Laboratory is registered to perform emission tests with Innovation, Science and Economic Development (ISED), and the registration number is 11177A.
The Laboratory is registered to perform emission tests with VCCI, and the registration number are C-20048, G20076, R-20077, R-20078 and T-20047.
The Laboratory is Accredited Testing Laboratory of American Association for Laboratory Accreditation (A2LA) and certificate number is 3292.01.

Report No.: WT228002410

Page 6/9

3. PRODUCT DESCRIPTION

3.1. EUT Description

Table 2 Specification of the Equipment under Test

Product Type: Hardware Version: Software Version:

Team Free V11 V1.1.34

FCC ID:

2A82ETF100

WLAN: 2412MHz~2462MHz

Frequency:

5180MHz~5240MHz

5745MHz~5825MHz

DSSS (DBPSK, DQPSK, CCK) for 802.11b

Type(s) of Modulation: OFDM (BPSK, QPSK, 16QAM, 64QAM) for 802.11a/g/n

OFDM (BPSK, QPSK, 16QAM, 64QAM256QAM) for 802.11ac

Antenna Type:

Loop Antenna: 2412MHz~2462MHz -1.68 dBi
5180~5240 MHz: 1.47 dBi 5745~5825 MHz: 4.24 dBi

Operating voltage:

AC 120V60Hz

Remark: /

Report No.: WT228002410

Page 7/9

4. RF EXPOSURE
4.1. LIMIT FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) This product can be classified as mobile device, so the 20cm separation distance warning is required. In this section, the power density at 20cm location is calculated to examine if it is lower than the limit.

4.2. MPE Calculation Method
Power Density: Pd(Mw/cm2)=P*G /4Pid2 P=Peak RF output power (mW) G=EUT Antenna numeric gain (numeric) Pi=3.14 d=Separation distance between radiator and human body (cm)
4.3. CALCULATED RESULT
WLAN 2.4G P=20.61 G=0dBi (numeric: 1.25) d=20cm Pd=115*1.25/4*3.14*400=0.029<1.0 REMARK: 2.4G WLAN RF output power data refer to the report No. WT228002408.

Report No.: WT228002410

Page 8/9

WLAN 5G P=15.06 G=0dBi (numeric: 1.25) d=20cm Pd=32*1.25/4*3.14*400=0.008<1.0 REMARK: 5G WLAN RF output power data refer to the report No. WT228002409.
END OF REPORT

Report No.: WT228002410

Page 9/9



Related FCC IDs:

Search Any Device: