ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT

fly

Test ReportBLE

Shenzhen Huafurui Technology Co., Ltd KK9 2AHZ5KK9 2AHZ5KK9 kk9

download (pdf)

KK9 Smartphone by Shenzhen Huafurui

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 72 Pages, 3.55MB

Document DEVICE REPORTKK9-Test-Report-Shenzhen-Huafurui-2ahz5kk9-ex-2-2
Report No.: S23041403206002

RADIO TEST REPORT FCC ID: 2AHZ5KK9
Product: Smartphone Trade Mark: CUBOT
Model No.: KINGKONG 9 Family Model: N/A
Report No.: S23041403206002 Issue Date: May 11, 2023
Prepared for
Shenzhen Huafurui Technology Co., Ltd
Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street ,Xili, Nan shan district,Shenzhen, China
Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao'an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090
Website: http://www.ntek.org.cn

Version.1.3

Page 1 of 72

Report No.: S23041403206002

TABLE OF CONTENTS

1 TEST RESULT CERTIFICATION ...................................................................................................................... 4
2 SUMMARY OF TEST RESULTS......................................................................................................................... 5
3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6
3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY............................................................................................................... 6
4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7
5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9
6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10
6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM..................................................................... 10 6.2 SUPPORT EQUIPMENT............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS.............................................................................................. 12
7 TEST REQUIREMENTS .................................................................................................................................... 14
7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments............................................................................................................................. 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15
7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.2.1 Applicable Standard .................................................................................................................................. 17 7.2.2 Conformance Limit ................................................................................................................................... 17 7.2.3 Measuring Instruments............................................................................................................................. 18 7.2.4 Test Configuration .................................................................................................................................... 18 7.2.5 Test Procedure ........................................................................................................................................... 19 7.2.6 Test Results ................................................................................................................................................ 20
7.3 6DB BANDWIDTH....................................................................................................................................... 26 7.3.1 Applicable Standard .................................................................................................................................. 26 7.3.2 Conformance Limit ................................................................................................................................... 26 7.3.3 Measuring Instruments............................................................................................................................. 26 7.3.4 Test Setup .................................................................................................................................................. 26 7.3.5 Test Procedure ........................................................................................................................................... 26 7.3.6 Test Results ................................................................................................................................................ 26
7.4 DUTY CYCLE............................................................................................................................................... 27 7.4.1 Applicable Standard .................................................................................................................................. 27 7.4.2 Conformance Limit ................................................................................................................................... 27 7.4.3 Measuring Instruments............................................................................................................................. 27 7.4.4 Test Setup .................................................................................................................................................. 27 7.4.5 Test Procedure ........................................................................................................................................... 27 7.4.6 Test Results ................................................................................................................................................ 28
7.5 PEAK OUTPUT POWER .............................................................................................................................. 29 7.5.1 Applicable Standard .................................................................................................................................. 29 7.5.2 Conformance Limit ................................................................................................................................... 29 7.5.3 Measuring Instruments............................................................................................................................. 29 7.5.4 Test Setup .................................................................................................................................................. 29 7.5.5 Test Procedure ........................................................................................................................................... 29 7.5.6 Test Results ................................................................................................................................................ 29

Version.1.3

Page 2 of 72

Report No.: S23041403206002
7.6 POWER SPECTRAL DENSITY ................................................................................................................... 30 7.6.1 Applicable Standard .................................................................................................................................. 30 7.6.2 Conformance Limit ................................................................................................................................... 30 7.6.3 Measuring Instruments............................................................................................................................. 30 7.6.4 Test Setup .................................................................................................................................................. 30 7.6.5 Test Procedure ........................................................................................................................................... 30 7.6.6 Test Results ................................................................................................................................................ 31
7.7 CONDUCTED BAND EDGE MEASUREMENT......................................................................................... 32 7.7.1 Applicable Standard .................................................................................................................................. 32 7.7.2 Conformance Limit ................................................................................................................................... 32 7.7.3 Measuring Instruments............................................................................................................................. 32 7.7.4 Test Setup .................................................................................................................................................. 32 7.7.5 Test Procedure ........................................................................................................................................... 32 7.7.6 Test Results ................................................................................................................................................ 32
7.8 SPURIOUS RF CONDUCTED EMISSIONS................................................................................................ 33 7.8.1 Conformance Limit ................................................................................................................................... 33 7.8.2 Measuring Instruments............................................................................................................................. 33 7.8.3 Test Setup .................................................................................................................................................. 33 7.8.4 Test Procedure ........................................................................................................................................... 33 7.8.5 Test Results ................................................................................................................................................ 33
7.9 ANTENNA APPLICATION .......................................................................................................................... 34 7.9.1 Antenna Requirement ............................................................................................................................... 34 7.9.2 Result ......................................................................................................................................................... 34
8 TEST RESULTS ................................................................................................................................................... 35
1M: ............................................................................................................................................................................. 35 8.1.1 Maximum Conducted Output Power........................................................................................................ 35 8.1.2 -6dB Bandwidth ........................................................................................................................................ 38 8.1.3 Occupied Channel Bandwidth .................................................................................................................. 41 8.1.4 Maximum Power Spectral Density Level ................................................................................................. 44 8.1.5 Band Edge ................................................................................................................................................. 47 8.1.6 Conducted RF Spurious Emission ........................................................................................................... 50
2M: ............................................................................................................................................................................. 54 8.1.7 Maximum Conducted Output Power........................................................................................................ 54 8.1.8 -6dB Bandwidth ........................................................................................................................................ 57 8.1.9 Occupied Channel Bandwidth .................................................................................................................. 60 8.1.10 Maximum Power Spectral Density Level ............................................................................................. 63 8.1.11 Band Edge ............................................................................................................................................. 66 8.1.12 Conducted RF Spurious Emission ....................................................................................................... 69

Version.1.3

Page 3 of 72

Report No.: S23041403206002

1 TEST RESULT CERTIFICATION

Applicant's name ......................... : Shenzhen Huafurui Technology Co., Ltd

Address ....................................... : Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street ,Xili, Nan shan district,Shenzhen, China

Manufacturer's Name .................. : Shenzhen Huafurui Technology Co., Ltd

Address ....................................... : Unit 1401 14/F, Jin qi zhi gu mansion Liu xian street ,Xili, Nan shan district,Shenzhen, China

Product description

Product name .............................. : Smartphone

Model and/or type reference ...... : KINGKONG 9

Family Model ............................... : N/A

Sample number

S230414032004

Measurement Procedure Used:

APPLICABLE STANDARDS

APPLICABLE STANDARD/ TEST PROCEDURE
FCC 47 CFR Part 2, Subpart J

FCC 47 CFR Part 15, Subpart C

ANSI C63.10-2013

KDB 558074 D01 15.247 Meas Guidance v05r02

TEST RESULT
Complied

This device described above has been tested by Shenzhen NTEK Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK Testing Technology Co., Ltd., this document may be altered or revised by Shenzhen NTEK Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. The test results of this report relate only to the tested sample identified in this report.

Date of Test

:

Apr 17, 2023 ~ May 09, 2023

Testing Engineer

:

(Allen Liu)

Authorized Signatory :

(Alex Li)

Version.1.3

Page 4 of 72

Report No.: S23041403206002

2 SUMMARY OF TEST RESULTS

FCC Part15 (15.247), Subpart C

Standard Section

Test Item

Verdict

15.207

Conducted Emission

PASS

Remark

15.247 (a)(2)

6dB Bandwidth

PASS

15.247 (b)
15.209 (a) 15.205 (a)
15.247 (e)

Peak Output Power Radiated Spurious Emission
Power Spectral Density

PASS PASS PASS

15.247 (d)

Band Edge Emission

PASS

15.247 (d)

Spurious RF Conducted Emission

PASS

15.203

Antenna Requirement

PASS

Remark: 1. "N/A" denotes test is not applicable in this Test Report. 2. All test items were verified and recorded according to the standards and without any deviation during
the test.

Version.1.3

Page 5 of 72

Report No.: S23041403206002

3 FACILITIES AND ACCREDITATIONS
3.1 FACILITIES All measurement facilities used to collect the measurement data are located at 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R. China. The sites are constructed in conformance with the requirements of ANSI C63.7, ANSI C63.10 and CISPR Publication 22.

3.2 LABORATORY ACCREDITATIONS AND LISTINGS

Site Description

CNAS-Lab.

: The Certificate Registration Number is L5516.

IC-Registration

The Certificate Registration Number is 9270A.

CAB identifier:CN0074

FCC- Accredited

Test Firm Registration Number: 463705.

Designation Number: CN1184

A2LA-Lab.

The Certificate Registration Number is 4298.01

This laboratory is accredited in accordance with the recognized

International Standard ISO/IEC 17025:2005 General requirements for

the competence of testing and calibration laboratories.

This accreditation demonstrates technical competence for a defined

scope and the operation of a laboratory quality management system

(refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009).

Name of Firm

: Shenzhen NTEK Testing Technology Co., Ltd.

Site Location

: 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang

Street, Bao'an District, Shenzhen 518126 P.R. China.

3.3 MEASUREMENT UNCERTAINTY

The reported uncertainty of measurement y±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %.

No.

Item

Uncertainty

1

Conducted Emission Test

±2.80dB

2

RF power, conducted

±0.16dB

3

Spurious emissions, conducted

±0.21dB

4

All emissions, radiated(30MHz~1GHz)

±2.64dB

5

All emissions, radiated(1GHz~6GHz)

6

All emissions, radiated(6GHz)

±2.40dB ±2.52dB

7

Temperature

±0.5°C

8

Humidity

±2%

9

All emissions, radiated(9KHz~30MHz)

±6dB

Version.1.3

Page 6 of 72

Report No.: S23041403206002

4 GENERAL DESCRIPTION OF EUT

Product Feature and Specification

Equipment

Smartphone

Trade Mark

CUBOT

FCC ID

2AHZ5KK9

Model No.

KINGKONG 9

Family Model

N/A

Model Difference

N/A

Operating Frequency 2402MHz~2480MHz

Modulation

GFSK

Number of Channels 40 Channels

Antenna Type

PIFA Antenna

Antenna Gain

0.88dBi

Adapter

Model: HJ-PD33W-US Input: 100-240V~50/60Hz 0.8A Output: 5.0V 3.0A 15.0W OR 9.0V
OR 12.0V 2.75A 33.0W MAX

3.0A 27.0W

Battery

DC 3.87V, 10600mAh

Power supply

DC 3.87V from battery or DC 5V from Adapter.

HW Version

M129-MUB-V2

SW Version

CUBOT_KINGKONG_9_V06

Note 1: Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual.
Note 2: The engineering test program was provided and the EUT was programmed to be in continuously transmitting mode.

Version.1.3

Page 7 of 72

Report No. S23041403206002

Report No.: S23041403206002

Revision History

Version Rev.01

Description Initial issue of report

Issued Date May 11, 2023

Version.1.3

Page 8 of 72

Report No.: S23041403206002

5 DESCRIPTION OF TEST MODES

To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) mentioned above was evaluated respectively.

The Transmitter was operated in the normal operating mode. The TX frequency was fixed which was for the purpose of the measurements.
Test of channel included the lowest and middle and highest frequency to perform the test, then record on this report.
Those data rates (1Mbps / 2Mbps for GFSK modulation) were used for all test.

The EUT was pretested with 3 orientations placed on the table for the radiated emission measurement ­X, Y, and Z-plane. The X-plane results were found as the worst case and were shown in this report.

Carrier Frequency and Channel list:
Channel
0 1 ... 19 20 ... 38 39 Note: fc=2402MHz+k×2MHz k=0 to 39

Frequency(MHz)
2402 2404
... 2440 2442
... 2478 2480

The following summary table is showing all test modes to demonstrate in compliance with the standard. Test Cases

Test Item

Data Rate/ Modulation

AC Conducted Emission

Mode 1: normal link mode

Mode 1: normal link mode

Radiated Test

Mode 2: GFSK Tx Ch00_2402MHz_1Mbps/2Mbps

Cases

Mode 3: GFSK Tx Ch19_2440MHz_1Mbps2Mbps

Mode 4: GFSK Tx Ch39_2480MHz_1Mbps2Mbps

Conducted Test Cases

Mode 2: GFSK Tx Ch00_2402MHz_1Mbps2Mbps Mode 3: GFSK Tx Ch19_2440MHz_1Mbps2Mbps Mode 4: GFSK Tx Ch39_2480MHz_1Mbps2Mbps

Note:

1. The engineering test program was provided and the EUT was programmed to be in continuously

transmitting mode(duty cycle =100% during the test)

2. AC power line Conducted Emission was tested under maximum output power.

3. For radiated test cases, the worst mode data rate 1Mbps was reported only, because this data rate

has the highest RF output power at preliminary tests, and no other significantly frequencies found in

conducted spurious emission.

4. EUT built-in battery-powered, the battery is fully-charged.

Version.1.3

Page 9 of 72

Report No.: S23041403206002

6 SETUP OF EQUIPMENT UNDER TEST
6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM

For AC Conducted Emission Mode

EUT

C-1 AE-1 Adapter

AC PLUG

For Radiated Test Cases
EUT

For Conducted Test Cases

Measurement C-2 Instrument

EUT

Note: The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and this temporary antenna connector is listed in the equipment list.

Version.1.3

Page 10 of 72

Report No.: S23041403206002

6.2 SUPPORT EQUIPMENT

The EUT has been tested as an independent unit together with other necessary accessories or support units.

The following support units or accessories were used to form a representative test configuration during the

tests.

Item

Equipment

Model/Type No.

Series No.

Note

AE-1

Adapter

HJ-PD33W-US

N/A

Peripherals

Item

Cable Type

Shielded Type

C-1

USB Cable

YES

C-2

RF Cable

YES

Ferrite Core NO NO

Length 1.0m 0.1m

Notes:
(1) The support equipment was authorized by Declaration of Confirmation. (2) For detachable type I/O cable should be specified the length in cm inLengthcolumn. (3) "YES" is means "shielded" "with core"; "NO" is means "unshielded" "without core".

Version.1.3

Page 11 of 72

Report No.: S23041403206002

6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS

Radiation& Conducted Test equipment

Item

Kind of Equipment

Manufacturer

1

Spectrum Analyzer

2

Spectrum Analyzer

3

Spectrum Analyzer

4 Test Receiver

Aglient Agilent
R&S R&S

Type No. E4407B

Serial No.

Last calibration

Calibrated until

Calibrati on
period

MY45108040 2023.03.27 2024.03.26 1 year

N9020A MY49100060 2022.06.17 2023.06.16 1 year

FSV40 ESPI7

101417 101318

2023.03.27 2024.03.26 1 year 2023.03.27 2024.03.26 1 year

5 Bilog Antenna TESEQ

CBL6111D

31216 2023.03.27 2024.03.26 1 year

6

50 Coaxial Switch

Anritsu

MP59B 6200983705 2020.05.11 2023.05.10 3 year

7 Horn Antenna

EM

EM-AH-1018 0

2011071402

2023.03.27

2024.03.26

1 year

8

Broadband Horn Antenna

SCHWARZBE CK

BBHA 9170

803

2022.11.08 2023.11.07 1 year

9

Amplifier

EMC

EMC051835 SE

980246

2022.06.17 2023.06.16 1 year

10

Active Loop SCHWARZBE FMZB 1519

Antenna

CK

B

055

2022.11.08 2023.11.07 1 year

11 Power Meter

DARE

RPR3006W

15I00041SN O84

2022.11.08

2023.11.07

1 year

12

Test Cable (9KHz-30MHz)

N/A

R-01

N/A

2020.05.11 2023.05.10 3 year

13

Test Cable (30MHz-1GHz)

N/A

R-02

N/A

2020.05.11 2023.05.10 3 year

High Test

14 Cable(1G-40G

N/A

R-03

N/A

2022.06.17 2025.06.16 3 year

Hz)

15

Filter

TRILTHIC 2400MHz

29

2022.11.08 2023.11.07 1 year

temporary

16

antenna connector

(Note)

NTS

R001

N/A

N/A

N/A

N/A

Note: We will use the temporary antenna connector (soldered on the PCB board) When conducted test And this temporary antenna connector is listed within the instrument list

Version.1.3

Page 12 of 72

Report No.: S23041403206002

AC Conduction Test equipment

Item

Kind of Equipment

Manufacturer

Type No.

Serial No.

Last calibration

1 Test Receiver

R&S

ESCI

101160 2023.03.27

2

LISN

R&S

ENV216

101313 2023.03.27

3

LISN

SCHWARZBE CK

NNLK 8129

8129245

2023.03.27

4

50 Coaxial Switch

ANRITSU CORP

MP59B 6200983704 2020.05.11

Test Cable

5 (9KHz-30MH

N/A

C01

N/A

2020.05.11

z)

Test Cable

6 (9KHz-30MH

N/A

C02

N/A

2020.05.11

z)

Test Cable

7 (9KHz-30MH

N/A

C03

N/A

2020.05.11

z)

Calibrated Calibration

until

period

2024.03.26 1 year

2024.03.26 1 year

2024.03.26 1 year

2023.05.10 3 year

2023.05.10 3 year

2023.05.10 3 year

2023.05.10 3 year

Note: Each piece of equipment is scheduled for calibration once a year except the Aux Equipment & Test Cable which is scheduled for calibration every 2 or 3 years.

Version.1.3

Page 13 of 72

Report No.: S23041403206002

7 TEST REQUIREMENTS

7.1 CONDUCTED EMISSIONS TEST

7.1.1 Applicable Standard According to FCC Part 15.207(a)

7.1.2 Conformance Limit

Frequency(MHz)

Conducted Emission Limit

Quasi-peak

Average

0.15-0.5

66-56*

56-46*

0.5-5.0

56

46

5.0-30.0

60

50

Note: 1. *Decreases with the logarithm of the frequency 2. The lower limit shall apply at the transition frequencies 3. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.

7.1.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report.

7.1.4 Test Configuration

Reference Ground
EMI Receiver

EUT

Auxiliary Reference Equipment Ground

80cm
LISN

50
80cm
LISN

7.1.5 Test Procedure
According to the requirements in Section 13.1.4.1 of ANSI C63.10-2013 Conducted emissions the EUT measured in the frequency range between 0.15 MHz and 30 MHz using CISPR Quasi-Peak and average detector mode.
1. The EUT was placed 0.4 meter from the conducting wall of the shielding room. 2. The EUT was placed on a table which is 0.8m above ground plane. 3. Connect EUT to the power mains through a line impedance stabilization network (LISN). All other support
equipments powered from additional LISN(s). The LISN provide 50 Ohm/ 50uH of coupling impedance for the measuring instrument. 4. Interconnecting cables that hang closer than 40 cm to the ground plane shall be folded back and forth in the center forming a bundle 30 to 40cm long. 5. I/O cables that are not connected to a peripheral shall be bundled in the center. The end of the cable may be terminated, if required, using the correct terminating impedance. The overall length shall not exceed 1 m. 6. LISN at least 80 cm from nearest part of EUT chassis. 7. The frequency range from 150KHz to 30MHz was searched. 8. Set the test-receiver system to Peak Detect Function and specified bandwidth(IF bandwidth=9KHz) with Maximum Hold Mode
9. For the actual test configuration, please refer to the related Item ­EUT Test Photos.

Version.1.3

Page 14 of 72

Report No.: S23041403206002

7.1.6 Test Results

EUT Temperature Pressure
Test Voltage 

Smartphone 22 
1010hPa DC 5V from Adapter AC 120V/60Hz

Model Name  KINGKONG 9

Relative Humidity 57%

Phase :

L

Test Mode

Mode 1

Frequency Reading Level Correct Factor Measure-ment

(MHz)

(dBV)

(dB)

(dBV)

0.1580 0.1580 0.1712 0.1712 0.2100 0.2100 0.5340 0.5340 1.7380 1.7380 9.6540 9.6540

40.87 30.16 36.56 25.35 29.97 20.19 22.83 12.31 22.28 12.01 24.65 14.64

9.95 9.95 9.97 9.97 10.06 10.06 10.71 10.71 13.14 13.14 9.69 9.69

50.82 40.11 46.53 35.32 40.03 30.25 33.54 23.02 35.42 25.15 34.34 24.33

Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss.

Limits
(dBV)
65.57 55.57 64.90 54.90 63.21 53.21 56.00 46.00 56.00 46.00 60.00 50.00

Margin
(dB)
-14.75 -15.46 -18.37 -19.58 -23.18 -22.96 -22.46 -22.98 -20.58 -20.85 -25.66 -25.67

Remark
QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG

Version.1.3

Page 15 of 72

Report No.: S23041403206002

EUT Temperature Pressure
Test Voltage 

Smartphone 22
1010hPa DC 5V from Adapter AC 120V/60Hz

Model Name  Relative Humidity Phase :
Test Mode

KINGKONG 9 57% N
Mode 1

Frequency Reading Level Correct Factor Measure-ment

(MHz)

(dBV)

(dB)

(dBV)

0.1539

42.96

9.93

52.89

0.1539 0.1980 0.1980

32.09 33.44 23.12

9.93 10.03 10.03

42.02 43.47 33.15

0.4500 0.4500 0.9220

26.42 15.56 23.01

10.55 10.55 11.50

36.97 26.11 34.51

0.9220 1.1380 1.1380

12.82 22.34 11.08

11.50 11.94 11.94

24.32 34.28 23.02

13.5980

25.79

9.70

35.49

13.5980

16.17

9.70

25.87

Remark:
1. All readings are Quasi-Peak and Average values. 2. Factor = Insertion Loss + Cable Loss.

Limits
(dBV)
65.79 55.79 63.69 53.69 56.88 46.88 56.00 46.00 56.00 46.00 60.00 50.00

Margin
(dB)
-12.90 -13.77 -20.22 -20.54 -19.91 -20.77 -21.49 -21.68 -21.72 -22.98 -24.51 -24.13

Remark
QP AVG QP AVG QP AVG QP AVG QP AVG QP AVG

Version.1.3

Page 16 of 72

Report No.: S23041403206002
7.2 RADIATED SPURIOUS EMISSION 7.2.1 Applicable Standard According to FCC Part 15.247(d) and 15.209 and ANSI C63.10-2013

7.2.2 Conformance Limit

According to FCC Part 15.247(d): radiated emissions which fall in the restricted bands, as defined in

§15.205(a), must also comply with the radiated emission limits specified in §15.209(a) (see §15.205(c)).

According to FCC Part15.205, Restricted bands

MHz

MHz

MHz

GHz

0.090-0.110

16.42-16.423

399.9-410

4.5-5.15

0.495-0.505

16.69475-16.69525

608-614

5.35-5.46

2.1735-2.1905

16.80425-16.80475

960-1240

7.25-7.75

4.125-4.128

25.5-25.67

1300-1427

8.025-8.5

4.17725-4.17775

37.5-38.25

1435-1626.5

9.0-9.2

4.20725-4.20775

73-74.6

1645.5-1646.5

9.3-9.5

6.215-6.218

74.8-75.2

1660-1710

10.6-12.7

6.26775-6.26825

123-138

2200-2300

14.47-14.5

8.291-8.294

149.9-150.05

2310-2390

15.35-16.2

8.362-8.366

156.52475-156.52525

2483.5-2500

17.7-21.4

8.37625-8.38675

156.7-156.9

2690-2900

22.01-23.12

8.41425-8.41475

162.0125-167.17

3260-3267

23.6-24.0

12.29-12.293

167.72-173.2

3332-3339

31.2-31.8

12.51975-12.52025

240-285

3345.8-3358

36.43-36.5

12.57675-12.57725

322-335.4

3600-4400

(2)

13.36-13.41

20dBc in any 100 kHz bandwidth outside the operating frequency band. In case the emission fall within the

restricted band specified on 15.205(a), then the 15.209(a) limit in the table below has to be followed.

Restricted Frequency(MHz)

Field Strength (V/m) Field Strength (dBV/m) Measurement Distance

0.009~0.490

2400/F(KHz)

20 log (uV/m)

300

0.490~1.705

24000/F(KHz)

20 log (uV/m)

30

1.705~30.0

30

29.5

30

30-88

100

40

3

88-216

150

43.5

3

216-960

200

46

3

Above 960

500

54

3

Limits of Radiated Emission Measurement(Above 1000MHz)

Frequency(MHz)

Class B (dBuV/m) (at 3M)

PEAK

AVERAGE

Above 1000

74

54

Remark :1. Emission level in dBuV/m=20 log (uV/m) 2. Measurement was performed at an antenna to the closed point of EUT distance of meters. 3. For Frequency 9kHz~30MHz: Distance extrapolation factor =40log(Specific distance/ test
distance)(dB); Limit line=Specific limits(dBuV) + distance extrapolation factor. For Frequency above 30MHz: Distance extrapolation factor =20log(Specific distance/ test distance)(dB);
Limit line=Specific limits(dBuV) + distance extrapolation factor.

Version.1.3

Page 17 of 72

7.2.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report. 7.2.4 Test Configuration (a) For radiated emissions below 30MHz

Report No.: S23041403206002

Turntable EUT

3m 0.8 m 1.0m

Ground Plane

(b) For radiated emissions from 30MHz to 1000MHz

Test Receiver
Coaxial Cable

Turntable
EUT Test Receiver

3m 0.8m

Ground Plane

(c) For radiated emissions above 1000MHz

3m Turntable
EUT 1.5m

1.5m

Version.1.3

1m to 4m Coaxial Cable

4m

Amplifie r

Test Receiver
Page 18 of 72

Report No.: S23041403206002

7.2.5 Test Procedure

The test site semi-anechoic chamber has met the requirement of NSA tolerance 4 dB according to the

standards: ANSI C63.10-2013. The test distance is 3m.The setup is according to the requirements in Section

13.1.4.1 of ANSI C63.10-2013 and CAN/CSA-CEI/IEC CISPR 22.

This test is required for any spurious emission that falls in a Restricted Band, as defined in Section 15.205.

It must be performed with the highest gain of each type of antenna proposed for use with the EUT.

Use the following spectrum analyzer settings:

Spectrum Parameter

Setting

Attenuation

Auto

Start Frequency

1000 MHz

Stop Frequency

10th carrier harmonic

RB / VB (emission in restricted band)

1 MHz / 1 MHz for Peak, 1 MHz / 1MHz for Average

Receiver Parameter Attenuation
Start ~ Stop Frequency Start ~ Stop Frequency Start ~ Stop Frequency

Setting Auto
9kHz~150kHz / RB 200Hz for QP 150kHz~30MHz / RB 9kHz for QP 30MHz~1000MHz / RB 120kHz for QP

a. The measuring distance of at 3 m shall be used for measurements at frequency up to 1GHz. For frequencies above 1GHz, any suitable measuring distance may be used.
b. The EUT was placed on the top of a rotating table 0.8 m for below 1GHz and 1.5m for above 1GHz the ground at a 3 meter. The table was rotated 360 degrees to determine the position of the highest radiation.
c. The height of the equipment or of the substitution antenna shall be 0.8 m for below 1GHz and 1.5m for above 1GHz; the height of the test antenna shall vary between 1 m to 4 m. Both horizontal and vertical polarizations of the antenna are set to make the measurement.
d. For the radiated emission test above 1GHz: Place the measurement antenna away from each area of the EUT determined to be a source of emissions at the specified measurement distance, while keeping the measurement antenna aimed at the source of emissions at each frequency of significant emissions, with polarization oriented for maximum response. The measurement antenna may have to be higher or lower than the EUT, depending on the radiation pattern of the emission and staying aimed at the emission source for receiving the maximum signal. The final measurement antenna elevation shall be that which maximizes the emissions. The measurement antenna elevation for maximum emissions shall be restricted to a range of heights of from 1 m to 4 m above the ground or reference ground plane.
e. The initial step in collecting conducted emission data is a spectrum analyzer peak detector mode pre-scanning the measurement frequency range. Significant peaks are then marked and then Quasi Peak detector mode re-measured.
f. If the Peak Mode measured value compliance with and lower than Quasi Peak Mode Limit, the EUT shall be deemed to meet QP Limits and then no additional QP Mode measurement performed.
g. For the actual test configuration, please refer to the related Item ­EUT Test Photos.
Note:
Both horizontal and vertical antenna polarities were tested and performed pretest to three orthogonal axis. The worst case emissions were reported

Version.1.3

Page 19 of 72

Report No.: S23041403206002

During the radiated emission test, the Spectrum Analyzer was set with the following configurations:

Frequency Band (MHz)

Function

Resolution bandwidth

Video Bandwidth

30 to 1000

QP

120 kHz

300 kHz

Above 1000

Peak Average

1 MHz 1 MHz

1 MHz 1 MHz

Note: for the frequency ranges below 30 MHz, a narrower RBW is used for these ranges but the measured value should add a RBW correction factor (RBWCF) where RBWCF [dB] =10*lg(100 [kHz]/narrower RBW [kHz]). , the narrower RBW is 1 kHz and RBWCF is 20 dB for the frequency 9 kHz to 150 kHz, and the narrower RBW is 10 kHz and RBWCF is 10 dB for the frequency 150 kHz to 30 MHz.

7.2.6 Test Results

 Spurious Emission below 30MHz (9KHz to 30MHz)

EUT:

Smartphone

Model No.:

Temperature: 20 

Relative Humidity:

Test Mode:

Mode1/Mode2/Mode3/ Mode4

Test By:

KINGKONG 9 48% Allen Liu

Freq.

Ant.Pol. Emission Level(dBuV/m) Limit 3m(dBuV/m)

Over(dB)

(MHz)

H/V

PK

AV

PK

AV

PK

AV

--

--

--

--

--

--

--

--

Note: the amplitude of spurious emission that is attenuated by more than 20dB below the permissible

limit has no need to be reported.

Version.1.3

Page 20 of 72

Report No.: S23041403206002

 Spurious Emission below 1GHz (30MHz to 1GHz) All the modulation modes have been tested, and the worst result was report as below:

EUT

Smartphone

Model Name 

KINGKONG 9

Temperature 25 

Relative Humidity

55%

Pressure

1010hPa

Test Mode

Mode 4 2Mbps

Test Voltage  DC 3.87V

Polar (H/V)

Frequency (MHz)

Meter Reading
(dBuV)

Factor (dB)

Emission Level
(dBuV/m)

Limits (dBuV/m)

V

38.2120

6.67

21.98

28.65

40.00

V

57.5939

8.60

12.48

21.08

40.00

V

100.9339

5.96

17.75

23.71

43.50

V

184.4898

10.72

16.68

27.40

43.50

V

302.4812

6.96

20.25

27.21

46.00

V

721.7259

7.69

28.28

35.97

46.00

Remark:

Emission Level= Meter Reading+ Factor, Margin= Emission Level - Limit

Margin
(dB)
-11.35 -18.92 -19.79 -16.10 -18.79 -10.03

Remark
QP QP QP QP QP QP

Version.1.3

Page 21 of 72

Report No.: S23041403206002

Polar (H/V)

Frequency (MHz)

Meter Reading
(dBuV)

Factor (dB)

Emission Level
(dBuV/m)

Limits (dBuV/m)

H

32.0667

5.50

25.32

30.82

40.00

H

52.7600

5.88

13.96

19.84

40.00

H

95.7622

5.52

17.32

22.84

43.50

H

144.3348

8.02

18.62

26.64

43.50

H

279.0436

6.91

19.96

26.87

46.00

H

580.7026

6.41

26.20

32.61

46.00

Remark:

Emission Level= Meter Reading+ Factor, Margin= Emission Level - Limit

Margin
(dB)
-9.18 -20.16 -20.66 -16.86 -19.13 -13.39

Remark
QP QP QP QP QP QP

Version.1.3

Page 22 of 72

Report No.: S23041403206002

 Spurious Emission Above 1GHz (1GHz to 25GHz)

EUT:

Smartphone

Model No.:

Temperature: 20 

Relative Humidity:

Test Mode:

Mode2/Mode3/Mode4 Test By:

KINGKONG 9 48% Allen Liu

Frequency (MHz)

Read Level
(dBV)

4804.338 4804.338 7206.107 7206.107 4804.169 4804.169 7206.214 7206.214

62.47 42.83 60.83 42.49 64.41 42.84 61.34 40.89

4880.473 4880.473 7320.265 7320.265 4880.366 4880.366 7320.234 7320.234

63.51 42.67 65.08 42.46 62.09 40.42 59.97 45.01

4960.482 4960.482 7440.131 7440.131 4960.326 4960.326 7440.199 7440.199

64.21 42.86 64.44 48.98 63.90 44.95 65.01 45.90

Cable loss (dB)
5.21 5.21 6.48 6.48 5.21 5.21 6.48 6.48
5.21 5.21 7.10 7.10 5.21 5.21 7.10 7.10
5.21 5.21 7.10 7.10 5.21 5.21 7.10 7.10

Antenna Preamp Emission

Factor Factor

Level

Limits

Margin

dB/m

(dB) (dBV/m) (dBV/m) (dB)

Low Channel (2402 MHz)(GFSK)--Above 1G

35.59 44.30

58.97

74.00 -15.03

35.59 44.30

39.33

54.00 -14.67

36.27 44.60

58.98

74.00 -15.02

36.27 44.60

40.64

54.00 -13.36

35.55 44.30

60.87

74.00 -13.13

35.55 44.30

39.30

54.00 -14.70

36.27 44.52

59.57

74.00 -14.43

36.27 44.52

39.12

54.00 -14.88

Mid Channel (2440 MHz)(GFSK)--Above 1G

35.66 44.20

60.18

74.00 -13.82

35.66 44.20

39.34

54.00 -14.66

36.50 44.43

64.25

74.00

-9.75

36.50 44.43

41.63

54.00 -12.37

35.66 44.20

58.76

74.00 -15.24

35.66 44.20

37.09

54.00 -16.91

36.50 44.43

59.14

74.00 -14.86

36.50 44.43

44.18

54.00

-9.82

High Channel (2480 MHz)(GFSK)-- Above 1G

35.52 35.52 36.53 36.53 35.52 35.52 36.53 36.53

44.21 44.21 44.60 44.60 44.21 44.21 44.60 44.60

60.73 39.38 63.47 48.01 60.42 41.47 64.04 44.93

74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00

-13.27 -14.62 -10.53 -5.99 -13.58 -12.53 -9.96 -9.07

Remark
Pk AV Pk AV Pk AV Pk AV
Pk AV Pk AV Pk AV Pk AV
Pk AV Pk AV Pk AV Pk AV

Comment
Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal
Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal
Vertical Vertical Vertical Vertical Horizontal Horizontal Horizontal Horizontal

Note: (1) Emission Level= Antenna Factor + Cable Loss + Read Level - Preamp Factor (2)All other emissions more than 20dB below the limit. (3)Only the worst data is recorded in the report, the data rates (2Mbps for GFSK modulation) test result is the worst

Version.1.3

Page 23 of 72

Report No.: S23041403206002

 Spurious Emission in Restricted Band 2310-2390MHz and 2483.5-2500MHz

EUT:

Smartphone

Model No.:

KINGKONG 9

Temperature: 20 

Relative Humidity: 48%

Test Mode: Mode2/ Mode4

Test By:

Allen Liu

Frequency (MHz)

Meter Reading
(dBV)

2310.00 2310.00 2310.00 2310.00 2390.00 2390.00 2390.00 2390.00 2483.50 2483.50 2483.50 2483.50

62.57 43.96 60.82 42.91 64.43 43.50 63.49 42.17 63.06 42.96 66.05 43.85

Cable Loss (dB)
2.97 2.97 2.97 2.97 3.14 3.14 3.14 3.14 3.58 3.58 3.58 3.58

Antenna Factor dB/m
27.80 27.80 27.80 27.80 27.21 27.21 27.21 27.21 27.70 27.70 27.70 27.70

Preamp Emission

Factor

Level

Limits

(dB) (dBV/m) (dBV/m) 1Mbps(GFSK)

43.80

49.54

74

43.80

30.93

54

43.80

47.79

74

43.80

29.88

54

43.80

50.98

74

43.80

30.05

54

43.80

50.04

74

43.80

28.72

54

44.00

50.34

74

44.00

30.24

54

44.00

53.33

74

44.00

31.13

54

Margin
(dB)
-24.46 -23.07 -26.21 -24.12 -23.02 -23.95 -23.96 -25.28 -23.66 -23.76 -20.67 -22.87

Detector Type

Comment

Pk

Horizontal

AV

Horizontal

Pk

Vertical

AV

Vertical

Pk

Vertical

AV

Vertical

Pk

Horizontal

AV

Horizontal

Pk

Vertical

AV

Vertical

Pk

Horizontal

AV

Horizontal

Note: (1) All other emissions more than 20dB below the limit. (2)Only the worst data is recorded in the report, the data rates (2Mbps for GFSK modulation) test result is the worst

Version.1.3

Page 24 of 72

Report No.: S23041403206002

 Spurious Emission in Restricted Band 3260MHz-18000MHz

EUT:

Smartphone

Model No.:

Temperature: 20 

Relative Humidity:

Test Mode:

Mode2/ Mode4

Test By:

KINGKONG 9 48% Allen Liu

Frequency
(MHz) 3260 3260 3260 3260 3332 3332 3332 3332 17797 17797 17788 17788

Reading Level (dBV) 63.02 57.48 65.69 58.50 65.42 57.77 67.05 52.37 45.37 35.15 45.11 35.79

Cable Loss (dB) 4.04 4.04 4.04 4.04 4.26 4.26 4.26 4.26 10.99 10.99 11.81 11.81

Antenna Factor dB/m 29.57 29.57 29.57 29.57 29.87 29.87 29.87 29.87 43.95 43.95 43.69 43.69

Preamp Factor (dB) 44.70 44.70 44.70 44.70 44.40 44.40 44.40 44.40 43.50 43.50 44.60 44.60

Emission Level

Limits

(dBV/m) (dBV/m)

51.93

74

46.39

54

54.60

74

47.41

54

55.15

74

47.50

54

56.78

74

42.10

54

56.81

74

46.59

54

56.01

74

46.69

54

Margin
(dB) -22.07 -7.61 -19.40 -6.59 -18.85 -6.50 -17.22 -11.90 -17.19 -7.41 -17.99 -7.31

Detector
Type Pk AV Pk AV Pk AV Pk AV Pk AV Pk AV

Comment
Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal Vertical Vertical Horizontal Horizontal

Note: (1) All other emissions more than 20dB below the limit. (2)Only the worst data is recorded in the report, the data rates (2Mbps for GFSK modulation) test result is the worst

Version.1.3

Page 25 of 72

Report No.: S23041403206002

7.3 6DB BANDWIDTH 7.3.1 Applicable Standard According to FCC Part 15.247(a)(2) and KDB 558074 D01 15.247 Meas Guidance v05r02 Section 8.2. 7.3.2 Conformance Limit The minimum permissible 6dB bandwidth is 500 kHz.

7.3.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report.

7.3.4 Test Setup Please refer to Section 6.1 of this test report.

7.3.5 Test Procedure
The testing follows Subclause 11.8 of ANSI C63.10 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings:
a) Set RBW = 100 kHz. b) Set the video bandwidth (VBW)  3*RBW. c) Detector = Peak. d) Trace mode = max hold. e) Sweep = auto couple. f) Allow the trace to stabilize. g) Measure the maximum width of the emission that is constrained by the frequencies associated with the two outermost amplitude points (upper and lower frequencies) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission.
7.3.6 Test Results

EUT: Temperature: Test Mode:

Smartphone 20  Mode2/Mode3/Mode4

Test data reference attachment.

Model No.: Relative Humidity: Test By:

KINGKONG 9 48% Allen Liu

Version.1.3

Page 26 of 72

Report No.: S23041403206002
7.4 DUTY CYCLE
7.4.1 Applicable Standard
According to KDB 558074 D01 15.247 Meas Guidance v05r02s Section 6.
7.4.2 Conformance Limit
No limit requirement.
7.4.3 Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.4.4 Test Setup
Please refer to Section 6.1 of this test report.
7.4.5 Test Procedure
The zero-span mode on a spectrum analyzer or EMI receiver if the response time and spacing between bins on the sweep are sufficient to permit accurate measurements of the on and off times of the transmitted signal. Set the center frequency of the instrument to the center frequency of the transmission. Set RBW  OBW if possible; otherwise, set RBW to the largest available value. Set VBW  RBW. Set detector = peak or average. The zero-span measurement method shall not be used unless both RBW and VBW are > 50/T and the number of sweep points across duration T exceeds 100. (For example, if VBW and/or RBW are limited to 3 MHz, then the zero-span method of measuring duty cycle shall not be used if T  16.7 microseconds.)
The transmitter output is connected to the Spectrum Analyzer. We tested accroding to the zero-span measurement method, 6.0)b) in KDB 558074
The largest availble value of RBW is 8 MHz and VBW is 50 MHz. The zero-span method of measuring duty cycle shall not be used if T  6.25 microseconds. (50/6.25 = 8)
The zero-span method was used because all measured T data are > 6.25 microseconds and both RBW and VBW are > 50/T.
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings: Span = Zero Span RBW = 8MHz(the largest available value) VBW = 8MHz ( RBW) Number of points in Sweep >100 Detector function = peak Trace = Clear write Measure Ttotal and Ton Calculate Duty Cycle = Ton / Ttotal

Version.1.3

Page 27 of 72

7.4.6 Test Results

EUT: Temperature: Test Mode:

Smartphone 20  N/A

NoteNot Applicable

Report No.: S23041403206002

Model No.: Relative Humidity: Test By:

KINGKONG 9 48% N/A

Version.1.3

Page 28 of 72

Report No.: S23041403206002

7.5 PEAK OUTPUT POWER
7.5.1 Applicable Standard
According to FCC Part 15.247(b)(3) and KDB 558074 D01 15.247 Meas Guidance v05r02 Section 8.3.1.
7.5.2 Conformance Limit
The maximum peak conducted output power of the intentional radiator for systems using digital modulation in the 2400 - 2483.5 MHz bands shall not exceed: 1 Watt (30dBm). If transmitting antenna of directional gain greater than 6dBi is used, the peak output power from the intentional radiator shall be reduced below the above stated value by the amount in dB that the directional gain of the antenna exceeds 6 dBi. In case of point-to-point operation, the limit has to be reduced by 1dB for every 3dB that the directional gain of the antenna exceeds 6dBi.
7.5.3 Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.

7.5.4 Test Setup Please refer to Section 6.1 of this test report.

7.5.5 Test Procedure
The testing follows Subclause 11.9.1.1 of ANSI C63.10 The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Use the following spectrum analyzer settings: Set the RBW DTS bandwidth. Set VBW =3*RBW. Set the span 3*RBW Set Sweep time = auto couple. Set Detector = peak. Set Trace mode = max hold. Allow trace to fully stabilize. Use peak marker function to determine the peak amplitude level.
7.5.6 Test Results

EUT: Temperature: Test Mode:

Smartphone 20  Mode2/Mode3/Mode4

Model No.: Relative Humidity: Test By:

KINGKONG 9 48% Allen Liu

Test data reference attachment.

Version.1.3

Page 29 of 72

Report No.: S23041403206002
7.6 POWER SPECTRAL DENSITY 7.6.1 Applicable Standard
According to FCC Part 15.247(e) and KDB 558074 D01 15.247 Meas Guidance v05r02 Section 8.4.
7.6.2 Conformance Limit
The transmitter power spectral density conducted from the transmitter to the antenna shall not be greater than 8 dBm in any 3 kHz band during any time interval of continuous transmission.
7.6.3 Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report.
7.6.4 Test Setup
Please refer to Section 6.1 of this test report.
7.6.5 Test Procedure
The testing follows Measurement Procedure Subclause 11.10.2 of ANSI C63.10 This procedure shall be used if maximum peak conducted output power was used to demonstrate compliance, and is optional if the maximum conducted (average) output power was used to demonstrate compliance.
The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. a) Set analyzer center frequency to DTS channel center frequency. b) Set the span to 1.5*DTS bandwidth. c) Set the RBW to: 3 kHz  RBW  100 kHz. d) Set the VBW  3 RBW. e) Detector = peak. f) Sweep time = auto couple. g) Trace mode = max hold. h) Allow trace to fully stabilize. i) Use the peak marker function to determine the maximum amplitude level within the RBW. j) If measured value exceeds limit, reduce RBW (no less than 3 kHz) and repeat.

Version.1.3

Page 30 of 72

Report No.: S23041403206002

7.6.6 Test Results

EUT: Temperature: Test Mode:

Smartphone 20  Mode2/Mode3/Mode4

Test data reference attachment.

Model No.: Relative Humidity: Test By:

KINGKONG 9 48% Allen Liu

Version.1.3

Page 31 of 72

Report No.: S23041403206002

7.7 CONDUCTED BAND EDGE MEASUREMENT 7.7.1 Applicable Standard According to FCC Part 15.247(d) and KDB 558074 D01 15.247 Meas Guidance v05r02 Section 8.7.

7.7.2 Conformance Limit
In any 100 kHz bandwidth outside the frequency band in which the spread spectrum or digitally modulated intentional radiator is operating, the radio frequency power that is produced by the intentional radiator shall be at least 20 dB below that in the 100 kHz bandwidth within the band that contains the highest level of the desired power, based on either an RF conducted or a radiated measurement, provided the transmitter demonstrates compliance with the peak conducted power limits. If the transmitter complies with the conducted power limits based on the use of RMS averaging over a time interval, as permitted under paragraph (b)(3) of this section, the attenuation required under this paragraph shall be 30 dB instead of 20 dB.

7.7.3 Measuring Instruments The Measuring equipment is listed in the section 6.3 of this test report.

7.7.4 Test Setup Please refer to Section 6.1 of this test report.

7.7.5 Test Procedure
The testing follows FCC KDB 558074 D01 15.247 Meas Guidance v05r02 Section 8.7. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. Set to the maximum power setting and enable the EUT transmit continuously. The EUT was operating in controlled its channel. Set RBW to 100 kHz and VBW of spectrum analyzer to 300 kHz with a convenient frequency span including 100 kHz bandwidth from band edge. Measure the highest amplitude appearing on spectral display and set it as a reference level. Plot the graph with marking the highest point and edge frequency. Repeat above procedures until all measured frequencies were complete.
7.7.6 Test Results

EUT: Temperature: Test Mode:

Smartphone 20  Mode2/Mode4

Model No.: Relative Humidity: Test By:

KINGKONG 9 48% Allen Liu

Test data reference attachment.

Version.1.3

Page 32 of 72

Report No.: S23041403206002
7.8 SPURIOUS RF CONDUCTED EMISSIONS 7.8.1 Conformance Limit
1. Below -20dB of the highest emission level in operating band. 2. Fall in the restricted bands listed in section 15.205. The maximum permitted average field strength is listed in section 15.209.
7.8.2 Measuring Instruments
The Measuring equipment is listed in the section 6.3 of this test report. 7.8.3 Test Setup
Please refer to Section 6.1 of this test report. 7.8.4 Test Procedure
The Spurious RF conducted emissions compliance of RF radiated emission should be measured by following the guidance in ANSI C63.10-2013 with respect to maximizing the emission by rotating the EUT, measuring the emission while the EUT is situated in three orthogonal planes (if appropriate), adjusting the measurement antenna height and polarization etc. Set RBW=100kHz and VBW= 300KHz to measure the peak field strength , and measure frequency range from 30MHz to 26.5GHz. 7.8.5 Test Results
Remark: The measurement frequency range is from 30MHz to the 10th harmonic of the fundamental frequency. The lowest, middle and highest channels are tested to verify the spurious emissions and bandege measurement data.
Test data reference attachment.

Version.1.3

Page 33 of 72

Report No.: S23041403206002
7.9 ANTENNA APPLICATION 7.9.1 Antenna Requirement 15.203 requirement: For intentional device, according to 15.203: an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device.
7.9.2 Result
The EUT antenna is permanent attached PIFA antenna (Gain: 0.88 dBi). It comply with the standard requirement.

Version.1.3

Page 34 of 72

Report No.: S23041403206002

8 TEST RESULTS

1M:

8.1.1 Maximum Conducted Output Power

Condition
NVNT NVNT NVNT

Mode
BLE 1M BLE 1M BLE 1M

Frequency Antenna (MHz)

2402 2440 2480

Ant1 Ant1 Ant1

Conducted Power (dBm) -4.14 -3.74 -3.79

Limit Verdict (dBm)
30 Pass 30 Pass 30 Pass

Version.1.3

Page 35 of 72

Report No.: S23041403206002 Test Graphs Power NVNT BLE 1M 2402MHz Ant1
Power NVNT BLE 1M 2440MHz Ant1

Version.1.3

Page 36 of 72

Report No.: S23041403206002 Power NVNT BLE 1M 2480MHz Ant1

Version.1.3

Page 37 of 72

Report No.: S23041403206002

8.1.2 -6dB Bandwidth

Condition

Mode

Frequency (MHz)

Antenna

NVNT

BLE 1M

2402

Ant1

NVNT

BLE 1M

2440

Ant1

NVNT

BLE 1M

2480

Ant1

-6 dB Bandwidth
(MHz) 0.698
0.702
0.696

Limit -6 dB Bandwidth (MHz)

Verdict

0.5

Pass

0.5

Pass

0.5

Pass

Version.1.3

Page 38 of 72

Report No.: S23041403206002 Test Graphs -6dB Bandwidth NVNT BLE 1M 2402MHz Ant1
-6dB Bandwidth NVNT BLE 1M 2440MHz Ant1

Version.1.3

Page 39 of 72

Report No.: S23041403206002 -6dB Bandwidth NVNT BLE 1M 2480MHz Ant1

Version.1.3

Page 40 of 72

Report No.: S23041403206002

8.1.3 Occupied Channel Bandwidth

Condition NVNT NVNT NVNT

Mode BLE 1M BLE 1M BLE 1M

Frequency (MHz) 2402 2440 2480

Antenna Ant1 Ant1 Ant1

99% OBW (MHz) 1.034 1.033 1.031

Version.1.3

Page 41 of 72

Report No.: S23041403206002 Test Graphs OBW NVNT BLE 1M 2402MHz Ant1
OBW NVNT BLE 1M 2440MHz Ant1

Version.1.3

Page 42 of 72

Report No.: S23041403206002 OBW NVNT BLE 1M 2480MHz Ant1

Version.1.3

Page 43 of 72

Report No.: S23041403206002

8.1.4 Maximum Power Spectral Density Level

Condition
NVNT NVNT NVNT

Mode
BLE 1M BLE 1M BLE 1M

Frequency (MHz) 2402 2440 2480

Antenna
Ant1 Ant1 Ant1

Conducted PSD (dBm)
-19.73 -19.33 -19.32

Limit (dBm)
8 8 8

Verdict
Pass Pass Pass

Version.1.3

Page 44 of 72

Report No.: S23041403206002 Test Graphs PSD NVNT BLE 1M 2402MHz Ant1
PSD NVNT BLE 1M 2440MHz Ant1

Version.1.3

Page 45 of 72

Report No.: S23041403206002 PSD NVNT BLE 1M 2480MHz Ant1

Version.1.3

Page 46 of 72

Report No.: S23041403206002

8.1.5 Band Edge

Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict

NVNT BLE 1M

2402

Ant1

-35.95

-20

Pass

NVNT BLE 1M

2480

Ant1

-38.87

-20

Pass

Version.1.3

Page 47 of 72

Report No.: S23041403206002 Test Graphs Band Edge NVNT BLE 1M 2402MHz Ant1 Ref
Band Edge NVNT BLE 1M 2402MHz Ant1 Emission

Version.1.3

Page 48 of 72

Report No.: S23041403206002 Band Edge NVNT BLE 1M 2480MHz Ant1 Ref
Band Edge NVNT BLE 1M 2480MHz Ant1 Emission

Version.1.3

Page 49 of 72

Report No.: S23041403206002

8.1.6 Conducted RF Spurious Emission

Condition NVNT NVNT NVNT

Mode BLE 1M BLE 1M BLE 1M

Frequency (MHz) 2402 2440 2480

Antenna Ant1 Ant1 Ant1

Max Value (dBc) -41.12 -41.01 -41.99

Limit (dBc) -20 -20 -20

Verdict Pass Pass Pass

Version.1.3

Page 50 of 72

Report No.: S23041403206002 Test Graphs Tx. Spurious NVNT BLE 1M 2402MHz Ant1 Ref
Tx. Spurious NVNT BLE 1M 2402MHz Ant1 Emission

Version.1.3

Page 51 of 72

Report No.: S23041403206002 Tx. Spurious NVNT BLE 1M 2440MHz Ant1 Ref
Tx. Spurious NVNT BLE 1M 2440MHz Ant1 Emission

Version.1.3

Page 52 of 72

Report No.: S23041403206002 Tx. Spurious NVNT BLE 1M 2480MHz Ant1 Ref
Tx. Spurious NVNT BLE 1M 2480MHz Ant1 Emission

Version.1.3

Page 53 of 72

Report No.: S23041403206002

2M:

8.1.7 Maximum Conducted Output Power

Condition
NVNT NVNT NVNT

Mode
BLE 2M BLE 2M BLE 2M

Frequency (MHz)
2402 2440 2480

Antenna
Ant1 Ant1 Ant1

Conducted Power (dBm) -4.07 -4.26 -4.24

Limit (dBm)
30 30 30

Verdict
Pass Pass Pass

Version.1.3

Page 54 of 72

Report No.: S23041403206002 Test Graphs Power NVNT BLE 2M 2402MHz Ant1
Power NVNT BLE 2M 2440MHz Ant1

Version.1.3

Page 55 of 72

Report No.: S23041403206002 Power NVNT BLE 2M 2480MHz Ant1

Version.1.3

Page 56 of 72

Report No.: S23041403206002

8.1.8 -6dB Bandwidth

Condition

Mode

Frequency (MHz)

Antenna

NVNT

BLE 2M

2402

Ant1

NVNT

BLE 2M

2440

Ant1

NVNT

BLE 2M

2480

Ant1

-6 dB Bandwidth
(MHz) 1.089
1.108
1.154

Limit -6 dB Bandwidth (MHz)

Verdict

0.5

Pass

0.5

Pass

0.5

Pass

Version.1.3

Page 57 of 72

Report No.: S23041403206002 Test Graphs -6dB Bandwidth NVNT BLE 2M 2402MHz Ant1
-6dB Bandwidth NVNT BLE 2M 2440MHz Ant1

Version.1.3

Page 58 of 72

Report No.: S23041403206002 -6dB Bandwidth NVNT BLE 2M 2480MHz Ant1

Version.1.3

Page 59 of 72

Report No.: S23041403206002

8.1.9 Occupied Channel Bandwidth

Condition NVNT NVNT NVNT

Mode BLE 2M BLE 2M BLE 2M

Frequency (MHz) 2402 2440 2480

Antenna Ant1 Ant1 Ant1

99% OBW (MHz) 2.058 2.05 2.063

Version.1.3

Page 60 of 72

Report No.: S23041403206002 Test Graphs OBW NVNT BLE 2M 2402MHz Ant1
OBW NVNT BLE 2M 2440MHz Ant1

Version.1.3

Page 61 of 72

Report No.: S23041403206002 OBW NVNT BLE 2M 2480MHz Ant1

Version.1.3

Page 62 of 72

Report No.: S23041403206002

8.1.10 Maximum Power Spectral Density Level

Condition
NVNT NVNT NVNT

Mode
BLE 2M BLE 2M BLE 2M

Frequency (MHz) 2402 2440 2480

Antenna
Ant1 Ant1 Ant1

Conducted PSD (dBm)
-21.83 -21.96
-22

Limit (dBm)
8 8 8

Verdict
Pass Pass Pass

Version.1.3

Page 63 of 72

Report No.: S23041403206002 Test Graphs PSD NVNT BLE 2M 2402MHz Ant1
PSD NVNT BLE 2M 2440MHz Ant1

Version.1.3

Page 64 of 72

Report No.: S23041403206002 PSD NVNT BLE 2M 2480MHz Ant1

Version.1.3

Page 65 of 72

Report No.: S23041403206002

8.1.11 Band Edge

Condition Mode Frequency (MHz)

NVNT BLE 2M

2402

NVNT BLE 2M

2480

Antenna Ant1 Ant1

Max Value (dBc) -46.67 -47.86

Limit (dBc) -20 -20

Verdict Pass Pass

Version.1.3

Page 66 of 72

Report No.: S23041403206002 Test Graphs Band Edge NVNT BLE 2M 2402MHz Ant1 Ref
Band Edge NVNT BLE 2M 2402MHz Ant1 Emission

Version.1.3

Page 67 of 72

Report No.: S23041403206002 Band Edge NVNT BLE 2M 2480MHz Ant1 Ref
Band Edge NVNT BLE 2M 2480MHz Ant1 Emission

Version.1.3

Page 68 of 72

Report No.: S23041403206002

8.1.12 Conducted RF Spurious Emission

Condition NVNT NVNT NVNT

Mode BLE 2M BLE 2M BLE 2M

Frequency (MHz) 2402 2440 2480

Antenna Ant1 Ant1 Ant1

Max Value (dBc) -40.75 -36.95 -40.41

Limit (dBc) -20 -20 -20

Verdict Pass Pass Pass

Version.1.3

Page 69 of 72

Report No.: S23041403206002 Test Graphs Tx. Spurious NVNT BLE 2M 2402MHz Ant1 Ref
Tx. Spurious NVNT BLE 2M 2402MHz Ant1 Emission

Version.1.3

Page 70 of 72

Report No.: S23041403206002 Tx. Spurious NVNT BLE 2M 2440MHz Ant1 Ref
Tx. Spurious NVNT BLE 2M 2440MHz Ant1 Emission

Version.1.3

Page 71 of 72

Report No.: S23041403206002 Tx. Spurious NVNT BLE 2M 2480MHz Ant1 Ref
Tx. Spurious NVNT BLE 2M 2480MHz Ant1 Emission

Version.1.3

END OF REPORT

Page 72 of 72



Related FCC IDs:

Search Any Device: