LCD Monitor User Manual

· Damages during transport due to improper packaging · Improper installation or maintenance other then in accordance with AOC’s user manual · Misuse · Neglect · Any...

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 63 Pages, 1.70MB

Document DEVICE REPORTaoc-bundel-collectie
LCD Monitor User Manual
I2475PXQU (LED backlight)

1

www.aoc.com

©2015 AOC. All Rights Reserved.

Safety ............................................................................................................................................................... 4 National Conventions.................................................................................................................................. 4 Power......................................................................................................................................................... 5 Installation.................................................................................................................................................. 6 Cleaning..................................................................................................................................................... 7 Other.......................................................................................................................................................... 8
Setup ................................................................................................................................................................ 9 Contents in Box .......................................................................................................................................... 9 Setup Base................................................................................................................................................10 Adjusting Viewing Angle.............................................................................................................................11 Connecting the Monitor ..............................................................................................................................12
Adjusting ..........................................................................................................................................................13 Setting Optimal Resolution.........................................................................................................................13 Windows 10........................................................................................................................................13 Windows 8..........................................................................................................................................15 Windows 7..........................................................................................................................................17 Hotkeys .....................................................................................................................................................19 OSD Setting ..............................................................................................................................................21 Luminance..........................................................................................................................................22 Image Setup .......................................................................................................................................23 Color Setup ........................................................................................................................................24 Picture Boost ......................................................................................................................................25 OSD Setup .........................................................................................................................................26 Extra ..................................................................................................................................................27 Exit .....................................................................................................................................................28 LED Indicator.............................................................................................................................................29
Driver ...............................................................................................................................................................30 Monitor Driver............................................................................................................................................30 Windows 10........................................................................................................................................30 Windows 8..........................................................................................................................................34 Windows 7..........................................................................................................................................38 i-Menu .......................................................................................................................................................42 e-Saver .....................................................................................................................................................43 Screen+ ....................................................................................................................................................44
Troubleshoot ....................................................................................................................................................45 Specification .....................................................................................................................................................47
General Specification .................................................................................................................................47 Preset Display Modes ................................................................................................................................48 Pin Assignments ........................................................................................................................................49 Plug and Play ............................................................................................................................................51 Regulation ........................................................................................................................................................52 FCC Notice................................................................................................................................................52 WEEE Declaration .....................................................................................................................................53 WEEE Declaration for India........................................................................................................................53 RoHS Declaration for India.........................................................................................................................53 EPA Energy Star ........................................................................................................................................54
2

EPEAT Declaration....................................................................................................................................54 Service.............................................................................................................................................................55
Warranty Statement for Europe ..................................................................................................................55 Warranty Statement for Middle East and Africa (MEA).................................................................................57 AOC International (Europe) B.V..................................................................................................................59
Warranty Statement for North & South America (excluding Brazil).........................................................60 EASE PROGRAME ...................................................................................................................................62 TCO DOCUMENT .....................................................................................................................................63
3

Safety
National Conventions
The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority.
4

Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock. The wall socket shall be installed near the equipment and shall be easily accessible.
5

Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer's instructions when installing the product and use mounting accessories recommended by the manufacturer. A product and cart combination should be moved with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or with the stand:
Installed with stand
11 7/8 inches 30cm

4 inches 10cm

4 inches 10cm
Leave at lease this space around the set

4 inches 10cm

6

Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
7

Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. For display with glossy bezel the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces.
8

Setup
Contents in Box

Monitor

CD Manual

Stand

Power Cable

Audio

DVI-D Analog Cable DP

HDMI

USB

Not all signal cables (Audio, DVI-D, Analog, DP, HDMI and USB cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.

9

Setup Base
Please setup or remove the base following the steps as below. Please place the monitor on a soft and flat surface to prevent the scratch. Setup:
Remove:
10

Adjusting Viewing Angle
For optimal viewing, it is recommended to look at the full face of the monitor, and then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. 1>You are able to adjust the monitor's angle from -5°to 20 °.
NOTE: Do not adjust the viewing angle over 20.5 degrees in order to avoid damage.
11

Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
1 Power 2 DVI 3 HDMI 4 Display port 5 Analog (D-Sub 15-Pin VGA cable) 6 AUDIO IN 7 Earphone out 8 USB 3.0 upstream 9 USB 2.0 10 USB 3.0 11 USB 3.0+ fast charging To protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the power cable to the AC port on the back of the monitor. 2 Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port. 3 Optional ­ (Requires a video card with DVI port) ­ Connect one end of the DVI cable to the back of the monitor
and connect the other end to the computer's DVI port. 4 Optional ­ (Requires a video card with HDMI port) ­ Connect one end of the HDMI cable to the back of the
monitor and connect the other end to the computer's HDMI port. 5 Optional ­ (Requires a video card with DP port) ­ Connect one end of the DP cable to the back of the monitor
and connect the other end to the computer's DP port. 6 Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, please refer Troubleshooting.
12

Adjusting
Setting Optimal Resolution
Windows 10
For Windows 10: · Right click START. · Click "CONTROL PANEL".
· Click "DISPLAY".
13

· Click on the "Change display settings" button. · Set the resolution SLIDE-BAR to Optimal preset resolution.
14

Windows 8
For Windows 8: · Right click and click All apps at the bottom-right of the screen.
· Set the "View by" to "Category". · Click "Appearance and Personalization".
15

· Click "DISPLAY". · Set the resolution SLIDE-BAR to Optimal preset resolution
16

Windows 7
For Windows 7: · Click START. · Click "CONTROL PANEL".
· Click "Appearance".
· Click "DISPLAY".
17

· Click on the "Change display settings" button.
· Set the resolution SLIDE-BAR to Optimal preset resolution
18

Hotkeys
1 Source/Auto/Exit 2 Clear Vision/< 3 Volume/> 4 Menu/Enter 5 Power
Menu/Enter Press to display the OSD or confirm the selection. Power Press the Power button to turn on/off the monitor. Volume/> When there is no OSD, press Volume adjust volume.
4:3 or wide image ratio / > When there is no OSD, press hotkey continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disable to adjust. ). Auto / Exit / Source hot key When there is no OSD, press Auto/Source button continuously about 2 second to do auto configure. When the OSD is closed, press Source button will be Source hot key function. Press Source button continuously to select the input source showed in the message bar, press Menu/Enter button to change to the source selected. Clear Vision 1. When there is no OSD, Press the "<" button to activate Clear Vision. 2. Use the "<" or ">" buttons to select between weak, medium, strong, or off settings. Default setting is always
"off".
19

3. Press and hold "<" button for 5 seconds to activate the Clear Vision Demo, and a message of "Clear Vision Demo: on" will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message will disappear. Press and hold "<" button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images into clear and vivid images.
20

OSD Setting
Basic and simple instruction on the control keys.

1. Press the

MENU-button to activate the OSD window.

2. Press or to navigate through the functions. Once the desired function is highlighted,

press the MENU-button to activate it. If there is a sub-menu, press or sub-menu functions.

to navigate through the

3. Press or to change the settings of the selected function. Press adjust any other function, repeat steps 2-3.

AUTO to exit. If you want to

4. OSD Lock Function: To lock the OSD, press and hold the

MENU-button while the monitor is off and then

press power button to turn the monitor on. To un-lock the OSD - press and hold the while the monitor is off and then press power button to turn the monitor on.

MENU-button

Notes: 1. If the product has only one signal input, the item of "Input Select" is disabled. 2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of "Image Ratio" is
disabled. 3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.

21

Luminance

1 Press MENU (Menu) to display menu.

2 Press or to select

(Luminance), and press MENU to enter.z

3 Press or to select submenu. 4 Press or to adjust.
5 Press AUTO to exit.

Contrast Brightness

0-100 0-100

Contrast from Digital-register. Backlight Adjustment

Standard

Standard Mode

Text

Text Mode

Eco mode

Internet Game

Internet Mode Game Mode

Movie

Movie Mode

Gamma DCR OverDrive

Sports
Gamma1 Gamma2 Gamma3 Off
On
Weak Medium Strong Off

Sports Mode Adjust to Gamma 1 Adjust to Gamma 2 Adjust to Gamma 3 Disable dynamic contrast ratio Enable dynamic contrast ratio
Adjust the response time.

22

Image Setup

1 Press MENU (Menu) to display menu.

2 Press or to select

(Image Setup), and press MENU to enter.

3 Press or to select submenu.

4 Press or to adjust.

5 Press AUTO to exit.

Clock Phase Sharpness H.Position V.Position

0-100 0-100 0-100 0-100 0-100

Adjust picture Clock to reduce Vertical-Line noise. Adjust Picture Phase to reduce Horizontal-Line noise. Adjust picture sharpness. Adjust the horizontal position of the picture. Adjust the vertical position of the picture.

23

Color Setup

1 Press MENU (Menu) to display menu.

2 Press or to select

(Color Setup), and press MENU to enter.

3 Press or to select submenu.

4 Press or to adjust.

5 Press AUTO to exit.

Color Temp.
DCB Mode DCB Demo

Warm

Normal

Cool

sRGB

Red

User

Green

Blue

Full Enhance ON/OFF

Nature Skin ON/OFF

Green Field ON/OFF

Sky-blue

ON/OFF

AutoDetect ON/OFF

ON/OFF

Recall Warm Color Temperature from EEPROM. Recall Normal Color Temperature from EEPROM. Recall Cool Color Temperature from EEPROM. Recall SRGB Color Temperature from EEPROM. Red gain from Digital-register. Green gain from Digital-register. Blue gain from Digital-register. Disable or Enable Full Enhance Mode. Disable or Enable Nature Skin Mode. Disable or Enable Green Field Mode. Disable or Enable Sky-blue Mode. Disable or Enable AutoDetect Mode. Disable or Enable Demo.

24

Picture Boost

1 Press MENU (Menu) to display menu.

2 Press or

to select

(Picture Boost), and press MENU to enter.

3 Press or to select submenu.

4 Press or to adjust.
5 Press AUTO to exit.

Bright Frame Frame Size Brightness Contrast H. position V. position

ON/OFF 14-100 0-100 0-100 0-100 0-100

Enable/Disable Bright Frame Adjust the Size of the Frame Brightness Adjustment for Enhance Area Contrast Adjustment for Enhance Area Adjust the horizontal position of the Frame Adjust the vertical position of the Frame

Note: Adjust the brightness, contrast, and position of the Bright Frame for better viewing experience.

25

OSD Setup

1 Press MENU (Menu) to display menu.

2 Press or to select

(OSD Setup), and press MENU to enter.

3 Press or to select submenu.

4 Press or to adjust.

5 Press AUTO to exit.

Language Timeout H.Position V. Position Transparence Break Reminder

5-120 0-100 0-100 0-100
ON/OFF

Select the OSD language Adjust the OSD timeout. Adjust the horizontal position of OSD Adjust the vertical position of the OSD. Adjust the OSD Break Reminder if the user continuely work for mare than 1 hurs

26

Extra

1 Press MENU (Menu) to display menu.

2 Press or to select

(Extra), and press MENU to enter.

3 Press or to select submenu.

4 Press or to adjust.

5 Press AUTO to exit.

Input Select
Auto Config. Off Timer

Auto D-SUB DVI HDMI DP Yes / No 0-24 hrs

Auto Detect input signal Select D-SUB signal source as input Select DVI signal source as input Select HDMI signal Source as input Select DP signal Source as input Auto adjust.the picture to default. Select DC off time.

Image Ratio
DDC/CI Reset

Wide
4:3 Yes / No Yes / No

16:9 or 16:10
4:3 or 5:4 Turn on or off DDC/CI Support. Reset the menu to default.

27

Exit

1 Press MENU (Menu) to display menu.

2 Press or to select
3 Press AUTO to exit.

(Exit), and press MENU to enter.

28

LED Indicator
Status Full Power Mode Power Saving

LED Color Green Orange

29

Driver
Monitor Driver
Windows 10
· Start Windows® 10 · Right click START. · Click "Control Panel".
· Click on the "Display" icon.
30

· Click on the "Change display settings" button
· Click the "Advanced Settings" button. 31

· Click the "Monitor" tab and then click the "Properties" button.
· Click the "Driver" tab.
· Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver... "and then click the "Browse my computer for driver software" button. 32

· Select "Let me pick from a list of device drivers on my computer".
· Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name(where X is the drive letter designator for the CD-ROM drive).
· Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. · Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk
drive. · Close all open windows and remove the CD. · Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
33

Windows 8
· Start Windows® 8 · Right click and click All apps at the bottom-right of the screen.
· Click on the "Control Panel" icon · Set the "View by" to "Large icons" or "Small icons".
· Click on the "Display" icon. 34

· Click on the "Change display settings" button. · Click the "Advanced Settings" button.
35

· Click the "Monitor" tab and then click the "Properties" button.
· Click the "Driver" tab.
· Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver..." and then click the "Browse my computer for driver software" button. 36

· Select "Let me pick from a list of device drivers on my computer".
· Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
· Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. · Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk
drive. · Close all open windows and remove the CD. · Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
37

Windows 7
· Start Windows® 7 · Click on the "Start" button and then click on "Control Panel".
· Click on the "Display" icon.
· Click on the "Change display settings" button.
38

· Click the "Advanced Settings" button. · Click the "Monitor" tab and then click the "Properties" button. · Click the "Driver" tab.
39

· Open the "Update Driver Software-Generic PnP Monitor" window by clicking on "Update Driver... " and then click the "Browse my computer for driver software" button.
· Select "Let me pick from a list of device drivers on my computer".
· Click the "Have Disk" button. Click on the "Browse" button and navigate to the following directory: X:\Driver\module name(where X is the drive letter designator for the CD-ROM drive).
40

· Select the "xxx.inf" file and click the "Open" button. Click the "OK" button. · Select your monitor model and click the "Next" button. The files will be copied from the CD to your hard disk
drive. · Close all open windows and remove the CD. · Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
41

i-Menu
Welcome to "i-Menu" software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
42

e-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to complete software installation. Under each of the four PC statuses, you may choose the desired time (in minutes) from the pull-down menu for your monitor to automatically shutdown. The example below illustrated: 1) The monitor will never shutdown when the PC is powered on. 2) The monitor will automatically shutdown 5 minutes after the PC is powered off. 3) The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode. 4) The monitor will automatically shutdown 20 minutes after the screen saver appears.
You can click "RESET" to set the e-Saver to its default settings like below.
43

Screen+
Welcome to "Screen+" software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop into different panels, and each panel displays a different window. You only need to drag the window to a corresponding panel when you want to access it. It supports multiple monitor display to make your task easier. Please follow the installation software to install it.
44

Troubleshoot

Problem & Question Power LED Is Not ON
No images on the screen

Possible Solutions
Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor.
 Is the power cord connected properly? Check the power cord connection and power supply.
 Is the cable connected correctly? (Connected using the D-sub cable) Check the DB-15 cable connection. (Connected using the DVI cable) Check the DVI cable connection. * DVI input is not available on every model.
 If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/2000) and then change the frequency of the video card. (Refer to the Setting the Optimal Resolution) If the initial screen (the login screen) does not appear, contact the Service Center or your dealer.
 Can you see "Input Not Supported" on the screen? You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly.
 Make sure the AOC Monitor Drivers are installed.

Picture Is Fuzzy & Has Ghosting Shadowing Problem

Adjust the Contrast and Brightness Controls. Press to auto adjust. Make sure you are not using an extension cable or switch box. We recommend plugging the monitor directly to the video card output connector on the back.

Picture Bounces, Flickers Or Wave Pattern Appears In The Picture

Move electrical devices that may cause electrical interference as far away from the monitor as possible. Use the maximum refresh rate your monitor is capable of at the resolution you are using.

45

Monitor Is Stuck In Active Off-Mode"

The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.

Missing one of the primary colors (RED, GREEN, or BLUE)

Inspect the monitor's video cable and make sure that no pin is damaged. Make sure the monitor's video cable is properly connected to the computer.

Screen image is not centered Adjust H-Position and V-Position or press hot-key (AUTO).
or sized properly

Picture has color defects (white does not look white)

Adjust RGB color or select desired color temperature.

Horizontal or vertical disturbances on the screen

Use Windows 95/98/2000/ME shut-down mode to adjust CLOCK and PHASE. Press to auto-adjust.

46

Specification

General Specification

Panel Others

Model name Driving system Viewable Image Size Pixel pitch
Video
Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size(Maximum) Vertical scan range Vertical scan Size(Maximum) Optimal preset resolution Plug & Play Input Connector Input Video Signal Speaker Power Source
Power Consumption

Environmental

Off timer
Connector Type
Signal Cable Type Dimensions & Weight: Height (with base) Width Depth Weight (monitor only) Temperature: Operating Non-Operating Humidity: Operating Non-Operating Altitude: Operating Non-Operating

I2475PXQU TFT Color LCD 60.4cm diagonal 0.2745(H)mm x 0.2745(V)mm R, G, B Analog Interface & Digital Interface&HDMI Interface&DP Interface H/V TTL 16.7M Colors 74.25MHz 56~90KHz

527.04 mm

50Hz ~ 75Hz

296.46 mm

1920x1080@60Hz

VESA DDC2B/CI

VGA/DVI-D /HDMI /DP/USB2.0/USB3.0

Analog: 0.7Vp-p(standard), 75 OHM, Positive, TMDS

2W x2

100-240V~, 50/60Hz

Typical (Brightness = 90,Contrast = 50)

40W

(Brightness = 100,Contrast = 100)

65W

Power saving

0.5W

0-24 hrs

VGA\ DVI-D \HDMI\DP \ Line in\Earphone out\ USB2.0/USB3.0

Detachable

489mm 554.44mm 212.91mm 4.9 kg

0°to 40°C -25°to 55°C

10% to 85% (non-condensing) 5% to 93% (non-condensing)

0~ 5000m(0~ 16404 ft) 0~ 12192m (0~ 40000 ft )

47

Preset Display Modes

Standard
VGA VGA VGA VGA SVGA SVGA SVGA SVGA XGA XGA XGA SXGA SXGA WXGA+ WSXGA FHD HD IBM MODE DOS IBM MODE DOS MAC MODE VGA MAC MODE SVGA
MAC MODE XGA

Resolution
640x480@60Hz 640x480@67Hz 640x480@72Hz 640x480@75Hz 800x600@56Hz 800x600@60Hz 800x600@72Hz 800x600@75Hz 1024x768@60Hz 1024x768@70Hz 1024x768@75Hz 1280x1024@60Hz 1280x1024@75Hz 1440x900@60Hz 1680x1050@60Hz 1920x1080@60Hz 1280x960@60HZ 640x350@70HZ 720x400@70HZ 640x480@67Hz 832x624@75Hz 1024x768@75Hz 1280×720@60Hz

H. Frequency (kHz)
31.469 35.000 37.861
37.5 35.156 37.879 48.077 46.875 48.363 56.476 60.023 63.981 79.976 55.935 65.290
67.5 60 31.469 31.469 35.000 49.725 60.241 44.772

V. Frequency (Hz)
59.94 66.667 72.809
75 56.25 60.317 72.188
75 60.004 70.069 75.029 60.02 75.025 59.887 59.954
60 60 70.087 70.087 66.667 74.551 74.927 59.855

48

Pin Assignments

15-Pin Color Display Signal Cable

Pin No. 1 2 3 4 5 6 7 8

Signal Name Video-Red Video-Green Video-Blue N.C. Detect Cable GND-R GND-G GND-B

24-Pin Color Display Signal Cable

Pin No. 1 2 3 4 5 6 7 8 9 10 11 12

Signal Name RX2RX2 SHLD2 N.C. N.C. SCL SDA N.C. RX1 RX 1 SHLD1 N.C.

Pin No. 9 10 11 12 13 14 15

Signal Name +5V Ground N.C. DDC-Serial data H-sync V-sync DDC-Serial clock

Pin No. 13 14 15 16 17 18 19 20 21 22 23 24

Signal Name N.C. 5V GND SENSE RX0 RX0 SHLD0 N.C. N.C. SHLDC RXC+ RXC

49

19-Pin Color Display Signal Cable

Pin No.

Signal Name

1

TMDS Data 2+

2

TMDS Data 2 Shield

3

TMDS Data 2

4

TMDS Data 1+

5

TMDS Data 1Shield

6

TMDS Data 1

7

TMDS Data 0+

8

TMDS Data 0 Shield

9

TMDS Data 0

10

TMDS Clock +

Pin No. 11 12 13 14 15 16 17 18 19

Signal Name TMDS Clock Shield TMDS Clock CEC Reserved (N.C. on device SCL SDA DDC/CEC Ground +5V Power Hot Plug Detect

20-Pin Color Display Signal Cable

Pin No. 1 2 3 4 5 6 7 8 9 10

Signal Name ML_Lane 3 (n) GND ML_Lane 3 (p) ML_Lane 2 (n) GND ML_Lane 2 (p) ML_Lane 1 (n) GND ML_Lane 1 (p) ML_Lane 0 (n)

Pin No. 11 12 13 14 15 16 17 18 19 20

Signal Name GND ML_Lane 0 (p) CONFIG1 CONFIG2 AUX_CH(p) GND AUX_CH(n) Hot Plug Detect Return DP_PWR DP_PWR

50

Plug and Play
Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over the DDC2B channel.
51

Regulation
FCC Notice
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
NOTICE: The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to correct such interference.
52

WEEE Declaration
Disposal of Waste Equipment by Users in Private Household in the European Union.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
WEEE Declaration for India
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling in India, please visit the below web link. www.aocindia.com/ewaste.php.
RoHS Declaration for India
his product complies with all implemented RoHS type regulations worldwide, including but not limited to, EU, Korea, Japan, US States (e.g. California), Ukraine, Serbia, Turkey, Vietnam and India. We continue to monitor, influence and develop our processes to comply with upcoming proposed RoHS type regulations, including but not limited to, Brazil, Argentina, Canada.
Restriction on Hazardous Substances statement (India)
This product complies with the "India E-waste Rule 2011" and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
53

EPA Energy Star
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. (FOR EPA CERTIFIED MODELS)
EPEAT Declaration
EPEAT is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEAT also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufacturers to secure market recognition for efforts to reduce the environmental impact of its products.
AOC believes in protecting the environment. With a key concern for the conservation of natural resources, as well as landfill protection, AOC announces the launch of AOC monitor's packaging recycling program. This program is designed to help you discard of your monitor carton and filler materials properly. If a local recycling center is not available, AOC will recycle the packaging material for you, including foam filler and carton. AOC Display solution will only recycle AOC monitor packaging. Please refer to the following website address: Only for North and South American, excluding Brazil: http://us.aoc.com/aoc-corporation/?page=environmental-impact For Germany: http://aoc-europe.com/de/content/environment For Brazil: http://www.aoc.com.br/2007/php/index.php?req=pagina&pgn_id=134
54

Service
Warranty Statement for Europe
LIMITED THREE-YEAR WARRANTY*
For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. In the absent of the proof of purchase, the warranty will start 3 months after the date of manufacturing indicated on the product.
If the product appears to be defective, please contact your local dealer or refer to the service and support section on www.aoc-europe.com for the warranty instructions in your country. The freight cost for the warranty is pre-paid by AOC for the delivery and return. Please ensure you provide a dated proof of purchase along with the product and deliver to the AOC Certified or Authorized Service Center under the following condition:
 Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to protects your monitor well enough during transport).
 Put the RMA number on the address label  Put the RMA number on the shipping carton
AOC International (Europe) B.V. will pay the return shipping charges within one of the countries specified within this warranty statement. AOC International (Europe) B.V. is not responsible for any costs associated with the transportation of product across international borders. This includes the international border within the European Union. If the LCD Monitor is not available for collection when the currier attends, you will be charged a collection fee.
* This limited warranty does not cover any losses or damages that occur as a result of: 
 Damages during transport due to improper packaging  Improper installation or maintenance other then in accordance with AOC's user manual  Misuse  Neglect  Any cause other than ordinary commercial or industrial application  Adjustment by non-authorized source  Repair, modification, or installation of options or parts by anyone other than an AOC Certified or
Authorized Service Center  Improper environments like humidity, water damage and dusts  Damaged by violence, earthquake and terrorist attacks  Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
55

All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards. If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please visit: http://www.aoc-europe.com
56

Warranty Statement for Middle East and Africa (MEA)
And
The Commonwealth of Independent States (CIS)
LIMITED ONE to THREE YEARS WARRANTY*
For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country. During this period, AOC International (Europe) B.V. offers a Carry-In (return to Service Center) Warranty Support at an AOC's Authorized Service Center or Dealer and at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. As a Standard Policy, the warranty will be calculated from the manufacture date identified from the product ID serial number, but the total warranty will be Fifteen (15) months to Thirty Nine (39) months from MFD (manufacture date) depending on sale country. Warranty will be considered for exceptional cases that are out of warranty as per the product ID serial number and for such exceptional cases; Original Invoice/Proof Of Purchase Receipt is mandatory.
If the product appears to be defective, please contact your AOC authorized dealer or refer to the service and support section on AOC's website for the warranty instructions in your country:
 Egypt: http://aocmonitorap.com/egypt_eng  CIS Central Asia: http://aocmonitorap.com/ciscentral  Middle East: http://aocmonitorap.com/middleeast  South Africa: http://aocmonitorap.com/southafrica  Saudi Arabia: http://aocmonitorap.com/saudiarabia
Please ensure you provide a dated proof of purchase along with the product and deliver to the AOC Authorized Service Center or Dealer under the following condition:
 Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to protects your monitor well enough during transport).
 Put the RMA number on the address label  Put the RMA number on the shipping carton
* This limited warranty does not cover any losses or damages that occur as a result of: 
 Damages during transport due to improper packaging  Improper installation or maintenance other then in accordance with AOC's user manual  Misuse  Neglect  Any cause other than ordinary commercial or industrial application  Adjustment by non-authorized source
57

 Repair, modification, or installation of options or parts by anyone other than an AOC Certified or Authorized Service Center
 Improper environments like humidity, water damage and dusts  Damaged by violence, earthquakes and terrorist attacks  Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.
If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified, Authorized Service Center or dealer will provide you with an estimate of service costs before receiving your authorization to perform service.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF ONE (1) to THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please visit: http://www.aocmonitorap.com
58

July 25th, 2013

AOC International (Europe) B.V.
Prins Bernhardplein 200 / 6th floor, Amsterdam, The Netherlands Tel: +31 (0)20 504 6962 · Fax: +31 (0)20 5046933
AOC Pixel Policy ISO 9241-307 Class 1

AOC strives to deliver the highest quality products. We use some of the industry's most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT monitor panel must exceed these acceptable levels.

Pixels and Sub Pixel Definition
A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. When all sub pixels of pixel are lit, the three colored sub pixel together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel.

Types of Pixel Defects

 Bright Dot Defects: the monitor displays a dark pattern, sub pixels or pixels are always lit or "on"

 Black Dot Defects: the monitor displays a light pattern, sub pixels or pixels are always dark or "off".

ISO 9241-307

Defect Type 1

Defect Type 2

Defect Type 3

Defect Type 4 Black

Pixel Defect Class

Bright Pixel

Black Pixel

Bright Sub pixel

Sub pixel

2

+

1

Class 1

1

1

1

+

3

0

+

5

AOC International (Europe) B.V. 59

Warranty Statement for North & South America (excluding Brazil)
WARRANTY STATEMENT for AOC Color Monitors Including those Sold within North America as Specified
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. The parts or product that are replaced become the property of EPI.
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI Authorized Service Center. If you cannot deliver the product in person:
Pack it in its original shipping container (or equivalent) Put the RMA number on the address label Put the RMA number on the shipping carton Insure it (or assume the risk of loss/damage during shipment) Pay all shipping charges
EPI is not responsible for damage to inbound product that was not properly packaged. EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is not responsible for any costs associated with the transportation of product across international borders. This includes the international borders of the countries within this warranty statements.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty.
* This limited warranty does not cover any losses or damages that occur as a result of:
Shipping or improper installation or maintenance Misuse Neglect Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center Improper environment Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities
This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.
60

ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE. EPI' LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
In the United States of America, this limited warranty is only valid for Products purchased in the Continental United States, Alaska, and Hawaii. Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.
Information in this document is subject to change without notice. For more details, please visit:
USA: http://us.aoc.com/support/find_service_center ARGENTINA: http://ar.aoc.com/support/find_service_center BOLIVIA: http://bo.aoc.com/support/find_service_center CHILE: http://cl.aoc.com/support/find_service_center COLOMBIA: http://co.aoc.com/support/find_service_center COSTA RICA: http://cr.aoc.com/support/find_service_center DOMINICAN REPUBLIC: http://do.aoc.com/support/find_service_center ECUADOR: http://ec.aoc.com/support/find_service_center EL SALVADOR: http://sv.aoc.com/support/find_service_center GUATEMALA: http://gt.aoc.com/support/find_service_center HONDURAS: http://hn.aoc.com/support/find_service_center NICARAGUA: http://ni.aoc.com/support/find_service_center PANAMA: http://pa.aoc.com/support/find_service_center PARAGUAY: http://py.aoc.com/support/find_service_center PERU: http://pe.aoc.com/support/find_service_center URUGUAY: http://pe.aoc.com/support/find_service_center VENEZUELA: http://ve.aoc.com/support/find_service_center IF COUNTRY NOT LISTED: http://latin.aoc.com/support/find_service_center
61

EASE PROGRAME

Only for AOC branded monitors sold within the continental United States.

All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time

during the first three months, AOC will provide a replacement monitor within 72 hours after you are

approved for our program. If your monitor qualifies for the EASE program, AOC will pay for freight both

ways.

Step 1: Phone our TECH Department at 888.662.9888.

Step 2: Fill out and return EASE registration forms by mail or fax.

Step 3: We will issue a Return Authorization Number upon verification into the program.

Step 4: A monitor will be advance shipped to your location.

Step 5: We will issue a UPS Call Tag to pick up the defective unit.

Step 6: Please review the following chart to see your EASE program qualifications.

WARRANTY

COVERAGE AT

CUSTOMER

PERIOD

NO CHARGE

CHARGES

Within the first three months of

- New AOC monitor - Call tag

- None*

purchase: Covered by EASE

dispatched and return freight

charges via UPS

Between 4 months ­ 1 Year

- All Parts & Labor Including CRT - UPS Return Freight to AOC

Tube & LCD Panel

Between 1 Year - 3 Years: Covered - Parts & Labor (excluding CRT

- UPS Return Freight to AOC

by standard limited warranty

Tube & LCD Panel)

*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC's service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.

www.aocmonitor.com

62

TCO DOCUMENT
(FOR TCO CERTIFIED MODELS) 63



Search Any Device: