EUROLYZER STx
EUROLYZER STx - SYSTRONIK
2 www.systronik.com EUROLYZER STx - the flue gas analyzer for measurement of small and medium-sized oil, gas and pellet heating systems in accordance with the German Federal Immision Act and to verify the CO concentration in gas fired systems. Ideal for the maintenance of pellet heating systems with temporary CO peaks up to 9,999 ppm or bivalent, modulating
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 8 Pages, 2.11MB
Document DEVICE REPORT190305 EUROLYZER-STx EN v21001 webBlueLine® EUROLYZER® STx Flue gas analyzer ProTdyupcettioesntemdonitored ProdBuakutimonusütbeerrgweapcrhütft EN 50379 EUROLYZER® STx - the flue gas analyzer for measurement of small and medium-sized oil, gas and pellet heating systems in accordance with the German Federal Immision Act and to verify the CO concentration in gas fired systems. Ideal for the maintenance of pellet heating systems with temporary CO peaks up to 9,999 ppm or bivalent, modulating combined heating and power plants. The BlueLine® EUROLYZER® STx is a portable flue gas analyzer with a robust protective holster and integrated magnets. The large TFT color display allows you to display up to 8 values. The EUROLYZER® STx includes automatic control devices at startup and limit monitoring to protect the sensors. The compact design allows any combination of up to three measuring cells (O2, CO, NO). The new ECO-sensor technology has a longer life, is resistant to biogenic fuels and also "lead-free" - an active contribution to environmental protection! Calculated parameters: CO undiluted (air free), Lambda, COc, efficiency (Eta), flue gas loss (qA), dew point, temperature difference. The CO/H2 measuring cell is H2-compensated for official measurements. The optional data logger function allows long-term measurements in freely definable intervals. The data output is in XML format supports and is therefore universally usable. There are a variety of data interfaces, such as USB, Bluetooth® Smart (BLE), infrared and microSDHC card for communication with other devices, PC or the EUROprinter available. Alternatively, the measurement protocols can be converted to QR code and then scanned by smartphones and tablets. The protocols can also be passed to management software programs. Funktionality Measurement of: O2 (oxygen) CO/H2 (carbon monoxide, H2-compensated) NO (nitrogen oxide) Draft /Differential pressure Tair (ambient temperature) Tgas (flue gas temperature) Barometric pressure Calculation of: CO2 (carbon dioxide) CO undiluted Difference in temperature Combustion efficiency Lambda (excess air) Flue-gas losses COref (O2ref configured) Dewp. (dewpoint) NOX (based on NO) The drop-down menu with colored icons appears immediately after activating the EUROLYZER® STx. The touch wheel can be used to choose following programs: flue gas analysis, temperature measurement, CO ambient measurement, pressure measurement, Pitot measurement (option), instrument settings and memory. You confirm your selection with the enter key. When using the flue gas analysis function, you will first be asked to make a selection from a list of fuel types. Then the measured values w ill be displayed on the screen. 2 www.systronik.com Compact ergonomic design Protective holster with magnets TFT color display Pause key Escape key Enter key On/Off key 40 mm 215 mm microSD card slot Infra-red port for EUROprinter USB port Loudspeaker 70 mm Top view Connection for ambient temperature Connection for flue gas temperature Connection plug for flue gas Differntial/pressure measurement (draft) Bottom view Connection plug for flue gas Differential/pressure measurement (draft) Clearly structured and field-proven display The EUROLYZER® STx has a 2.8" TFT color display with a resolution of 240 x 320 pixels. The various measurement menus are each displayed in their own unique color, which simplifies navigation. The display's large viewing angle, clarity and backlight ensure that the data and measurement values displayed are clearly visible under all circumstance. Easy to use Due to the clever design, everything is put in a convenient and logical place (see above). The BlueLine® EUROLYZER® STx is very compact and therefore easy to handle and transport. You can make the same high quality demands an the EUROLYZER® STx as on any other BlueLine® measuring instruments! www.systronik.com 3 Technical specifications O2 (oxygen) Measuring range 0 to 21 vol.-% Accuracy ±0.2 vol.-% RDG Resolution 0.1 vol.-% Response delay (t90) < 30 seconds CO (carbon monoxide) with H2-compensation Measuring range 0 to 4,000 ppm (max. 10,000) Accuracy ±5 ppm (< 50 ppm) ±5 % RDG (> 50 ppm) Resolution 1 ppm Response delay (t90) < 60 seconds CO2 (carbon dioxide) calculated Measuring range 0 to CO2 max. Accuracy ±0.2 vol.-% Resolution 0.1 vol.-% Response delay (t90) < 30 seconds Flue gas temperature Measuring range 0 to 1,150 °C Accuracy ±1 °C + 1 digit (< 300 °C) ±0.5 % RDG (> 300 °C) Resolution 0.1 °C Response delay (t90) < 30 seconds Ambient air temperature Measuring range -20 to 200 °C Accuracy ±3 °C + 1 digit (-20 to 0 °C) ±1 °C + 1 digit (0 to 200 °C) Resolution 0.1 °C Response delay (t90) < 30 seconds Baromectric pressure Measuring range 500 to 1,150 hPa Accuracy ±10 hPa Resolution 1 hPa Response delay (t90) < 60 seconds NO Measuring range Accuracy Resolution Response delay (t90) Draft/differential pressure Measuring range Accuracy Resolution Max. overload Response delay (t90) Pitot Measuring range Accuracy Resolution Response delay (t90) Options 0 to 2,000 ppm ±5 ppm (< 50 ppm) ±5% RDG ( > 50 ppm) 1 pmm < 60 seconds ±70 hPa (draft) / ±150 hPa (diff. pressure) ±0.02 hPa (< 2 hPa) ±1 % RDG (> 2 hPa) 0.01 hPa (< 20 hPa) 0.1 hPa (> 20 hPa) 1,350 hPa < 10 seconds 0.5 to 70 m/s ±0.8 m/s 0.1 m/s < 20 seconds Accessories The EUROLYZER® STx has matching accessories for every job in the HVAC professional and chimney sweep everyday life. The high-quality carrying case has room for all this. For example, for a 300 mm exhaust gas probe with 2.40 m hose and condensate cartridge filter, protective cover with magnet, battery charger / power supply, temperature sensor for ambient air, manual (incl. copy of EN50379 certificate). 4 www.systronik.com Performance In addition to the usual gas-measurement functions, the compact all-rounder can accommodate up to three gas-measuring cell, one pressure and two temperature sensors and so it offers the possibility to check all heating systems on the market. The ECO-sensor technology ensures to the fast response. The EUROLYZER® STx starts a test during commissioning to ensure correct functioning of the device. All sensors are activated, the status of the battery is displayed. If the calibration date is exceeded, a message is displayed. The EUROLYZER® STx is fitted with a condensate filter cartridge. This component is arranged in the hose line so that the user can clearly see when the water-trap needs to be emptied. A dust filter and a PTFE filter are also integrated in the condensate filter cartridge. The PTFE filter prevents that the condensate reaches the sensors. EN50379 Part 1 and 2 The EN50379 is the European standard, in which the permissible measurement procedures are established for the measurement of combustion devices. The EUROLYZER® STx has certification EN50379 part 1 and 2 for measurements of O2, CO/H2, NO, temperature and differential pressure. General specifications Dimensions H x W x D 215 x 70 x 40 mm Weight between 500 and 650 g Material housing Display type Plastic (PA) 2.8" TFT (240 x 320 pixels) Air pressure range 750 to 1,100 hPa Humidity range 20 to 80 % rh Operating temperature 0 to 40 °C Storage temperature -20 to 50 °C Data interface Bluetooth® QR code generator microSD card Wireless IR connection with optional EUROprinter Connection Gas: 1x Ø 8 mm Pressure: 2x Ø 7 mm Temperature: 2x Thermocouple socket Power supply Mini USB mains unit (5 V) Battery type rechargeable li-ion battery 3.6 V / 2,900 mAh Memory type optional microSD card up to 16 GB Ingress protection rating IP42 (EN 60529) Maximum flexibility in data documentation The free EuroSoft® connect App allows to transmit measured values to smartphones, tablets or PCs via QR code or Bluetooth®. All BlueLine® measuring instruments can be used together with this app for documentation and visualisation of "live" measurement results, logs and long-term measurements. Ideal for adjustment and documentation with the optional data logger function. Measurements can be shared in multible ways (e.g.: cloud services, email, etc.). The evaluation software can be used on iOS, Android or Windows operating systems. www.systronik.com 5 Optional accessoires Modular probe system with interchangeable probes Base handle for interchangeable probes PTFE-filter The EUROLYZER STx's condensate cartrigde contains a PTFE-filter, which functions as an additional safeguard against condensation. Dust filter The condensate cartridge also contains a dust filter that protects the flue gas analyzers against dust and soot particles. Dust and other particles can impair the instruments if they reach the sensors. The dust filter should be replaced periodically to guarantee proper operation. Base handle with hose and condensate filter cartridge Interchangeable Interchangeable Flexible probe, probe, 180 mm probe, 300 mm 400 mm Thermal printer EUROprinter Compact printer with four magnets at the back for hands-free operation. Infrared interface for easy connection of all BlueLine® series measuring instruments. Documents all measured results on paper for official purposes - anywhere. Accessories included: batteries, 1 roll printer paper and user's manual Printer paper for EUROprinter 5 rolls thermo printer paper 6 www.systronik.com Quality since 1987 SYSTRONIK GmbH is specialized in development and production high quality measuring instruments for flue gas analysis, testing and maintaining HVAC installations, climate and environmental technology. All SYSTRONIK products satisfy the highest standards for quality, reliability and safety. Our facilities are certified to full operational requirements of the ISO 9001 quality standard. We are constantly striving to improve our quality assurance position with input from periodic audits by independent experts required for continued certification. www.systronik.com 7 Distributor: Elektronik und Systemtechnik GmbH Gewerbestraße 57 88636 Illmensee, Germany Phone +49 7558 9206-0 Fax +49 7558 9206-20 [email protected] www.systronik.com Subject to change - v21001 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SYSTRONIK is under license. Google Play and the Google Play logo are trademarks of Google LLC. Apple and the Apple logo are trademarks of Apple Inc.Adobe PDF Library 15.0 Adobe InDesign 16.0 (Windows)