NINA-W106 Identifier marking

filip.kruzela

Label Location

u-blox AG NINAW106 NINA-W1 XPYNINAW106 XPYNINAW106 ninaw106

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 294.08KB

Document DEVICE REPORTGetApplicationAttachment.html?id=5038759
RE: Certification Application Model: NINA-W106, NINA-W136, NINA-W156, NINA-B226 IC : 8595A-NINAW106
FCC ID: XPYNINAW106

Registered office: u-blox AG Zuercherstrasse 68, Thalwil, Ch-8800, Switzerland
Company number: CH-020.3.020.161-7
[email protected] [email protected]

Label location information for the NINA-W106, NINA-W136, NINA-

W156, NINA-B226 modules

The product label is affixed on to the module shield cover as shown in Figure 1. The size of the label is 7.5 x 7.5 mm and contains the following information:
 A Data Matrix formatted bar code, with a unique serial number  Date of unit production formatted YY/WW (year/week)  Major and minor product version info  Product marketing name (e.g. NINA-W106, NINA-W136, NINA-W156, NINA-B226)  u-blox logo, the red dot of the logo also indicates the location of module pin-1.

Figure 1: Label location of the NINA-W106, NINA-W136, NINA-W156, NINA-B226 modules
Figure 2: Actual size of the NINA-W106, NINA-W136, NINA-W156, NINA-B226 identifier marking (7.5 x 7.5 mm)
The modules are SMT components shipped to the OEM-integrator on Tape&Reel packed in a sealed Dry-Pac bag and mounted onto the host board by automatic "Pick&Place" machines. As the module is a surface mount device that is soldered onto the host it is not possible to place the label on the secondary side of the module. To be able to fit the FCC/IC certification number on the label the font size has to be smaller than 4 points. Using such small font size makes the certification number too small to be readable. Therefore in accordance with CFR 47 §2.925 (f) the FCC IDs is not printed on the label but instead placed in the user manual and placed on the device packaging (e.g. Dry-Pac bag). The user manual also contains instruction on how to attach an auxiliary label on the end-product in compliance with the modular approval guidelines. The instructions will call attention to place the auxiliary label on an exterior surface of the device such that it will be visible upon inspection. The auxiliary label will have at least the information shown in Figure 3.

This device contains FCC ID: XPYNINAW106 IC: 8595A-NINAW106
Figure 3: Auxiliary label of NINA-W106, NINA-W136, NINA-W156, NINA-B226
NINA-W106, NINA-W136, NINA-W156, NINA-B226 batch label for DryPac and Box:
Figure 4: NINA-W106, NINA-W136, NINA-W156, NINA-B226 batch label



Related FCC IDs:

Search Any Device: