完整板面.
Label
FIRLAKE LLC HUB2 Bed-patient activity monitoring system 2BNH8-HUB2 2BNH8HUB2 hub2
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 1 Pages, 5.48MB
Document DEVICE REPORTGetApplicationAttachment.html?id=8011089right Getting out from side of bed: Place Bed Pad with arrow to bed foot. left Getting out from side of bed: Place Bed Pad with arrow to bed head. Bed-patient activity monitoring system Any questions, please contact us: [email protected] We will reply you within 24 hours and provide you with the best solution THIS SIDE MUST FACE UP FACE TOWARDS THE BED'S EXIT SIDE 1 3 two AA batteries. STEP1: Open the battery compartment back panel of The monitor and install two AA batteries. 2 (Press and hold for about three seconds.) STEP3: Press and hold the [Pair] button on The monitor for about 3 seconds until the LED status indicator is on green and steady. 4 two AAA batteries. OFF ON OFF ON (Bee.Bee) OFF ON (Note: Do not turn on the switch on the battery box at this time.) STEP2: Open the side pocket of Bed_Pad, take out the battery box and install two AAA batteries. (Note: Do not turn on the switch on the battery box at this time.) OFF ON STEP4: Turn on the switch on the Bed_Pad battery box. At this time, it will enter the automatic pairing mode. When you hear two beeps of "Bee, Bee" from Bed_Pad, it means that the pairing is completed Bed-patient activity monitoring system FCC ID2BNH8-HUB2 This device complles with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)this device must accept any interference received.inciuding interference that may cause undesired operation, IP21 IEC/EN 60601-1 IEC/EN 60601-1-6 IEC/EN 60601-1-11 Made in P.R.C
Related FCC IDs:
- 2BNH8-HUB2 - FIRLAKE LLC Bed-patient activity monitoring system [-HUB2] Adobe PDF library 15.00 Adobe Illustrator(R) 24.0