BMurphy
Product & Installation Manual
The HEATSTRIP products must be maintained and cleaned according to instructions detailed in the Installation Manual. There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units depends entirely upon the system design and capacities as determined by the purchaser.
Product & Installation Manual - Rackcdn.com
THHAC-004. 150 x 150 x 50. 1. 316 SS. Brackets only. (for use with 25x25x1mm tube). THHAC-005. 300 x 150 x 50. 2. 316 SS. Kit includes 2x300mm extension ...
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 6 Pages, 1.38MB
Document DEVICE REPORT1d52e44d-aabd-4f8b-bbfb-449c33f9f15bProduct & Installation Manual HEATSTRIP® Classic (THH-A) The heater that is a design feature! Extension Mount Bracket The Extension Mount bracket allows HEATSTRIP® Classic units to be lowered from high ceilings using rigid connections. The brackets are designed to be used with 25mm x 25mm x 1mm tube (SHS), and can be supplied as brackets only for customising the length of the drop on site, or supplied as a complete kit with brackets, pre-cut poles and connections. The standard length options as part of the kit are 150mm, 300mm, 600mm, 900mm and 1200mm. The kits include all brackets, poles and screws necessary for connection to the heaters, however it does not include screws for attachment to the ceiling. PART No THHAC-004 THHAC-005 THHAC-006 THHAC-007 THHAC-008 PACKAGED DIMENSIONS (mm) 150 x 150 x 50 WEIGHT (kg) 1 MATERIALS 316 SS 300 x 150 x 50 2 316 SS 600 x 150 x 50 2 316 SS 900 x 150 x 50 2.5 316 SS 1200 x 150 x 50 3 316 SS NOTES Brackets only (for use with 25x25x1mm tube) Kit includes 2x300mm extension pole, screws and brackets Kit includes 2x600mm extension pole, screws and brackets Kit includes 2x900mm extension pole, screws and brackets Kit includes 2x1200mm extension pole, screws 21 Warranty Terms & Conditions The below Warranty Terms and Conditions apply for New Zealand and Australia only. For international warranty please refer to international warranty terms and conditions. Thermofilm warrants to the original owner that HEATSTRIP® products will be free from defects in materials and workmanship for a period of 12 months from the date of purchase in accordance with the following warranty terms and conditions. Provision of this warranty is subject to: The HEATSTRIP® products must be installed in accordance with the Installation Instructions and relevant electrical standards and codes. The HEATSTRIP® products must be maintained and cleaned according to instructions detailed in the Installation Manual. There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units depends entirely upon the system design and capacities as determined by the purchaser. The customer has not repaired, opened or altered the product in any unauthorised manner. This warranty excludes damage to the product or components arising from circumstances outside the control of Thermofilm, including, but not limited to, where the product is not used for intended purpose; where the product has been rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication, misuse, abuse, vandalism, lack of maintenance or accident. Thermofilm's obligations under this warranty are limited to repair or replacement at Thermofilm's factory of any components of the product which Thermofilm identifies to its satisfaction to be defective. Transportation charges involved in return of the product to the Thermofilm factory (or any other location authorised in writing by Thermofilm) is the sole responsibility of the customer. All products are inspected and tested before despatch and are at the risk of the purchaser after the shipment from the Thermofilm factory, if not delivered by Thermofilm to destination. No products or components will be supplied in advance of an examination of the faulty product or components by Thermofilm or an authorized representative of Thermofilm. Thermofilm does not participate in any site related costs or labour expenses incidental to replacement of parts, repairing, removing, installing, servicing, transportation or handling of parts to complete products, and assumes no liability on parts repaired or replaced without written authorisation. Thermofilm shall not be liable for any default or delay in performance of its warranty obligations caused by any circumstances beyond its control, including, but not limited to, judicial or government restrictions, strikes, fires, floods, abnormal weather conditions, delayed supply of components. Should products be determined as damaged on arrival, immediately notify the transport company of the condition and have them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection by the transportation company and insist that a record of the damage is made on the freight documentation. The customer warrants using the product in accordance with: Any instructions provided to it by Thermofilm from time to time. All government and local regulations, including but not limited to all relevant electrical, environmental laws and regulations governing the installation, storage, use, handling and maintenance of the goods. All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and maintenance of goods. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. All warranty requests for repairs or replacements must be accompanied by a complete "Warranty Claim Form" available from Thermofilm, together with proof of purchase (and where possible, photos of the installation) and the heater returned to the place of purchase. In the event of a warranty claim, the goods need to be returned to the distributor/retailer for repair/replacement. Contact Thermofilm Australia Pty Ltd 17 Johnston Court, Dandenong South, Victoria 3175, Australia Telephone: (03) 9562 3455, Email: [email protected] 28 Product Manual HEATSTRIP® Max (THX) Take Heating to the Max! Extension Mount Bracket The Extension Mount bracket allows HEATSTRIP® Max units to be lowered from high ceilings, using rigid connections. The brackets are for use with 25mm x 25mm x 1mm tube (SHS), supplied as a complete kit with brackets, pre-cut poles and connections. The standard length options as part of the kit are 300mm, 600mm, 900mm and 1200mm. The kits include all brackets, poles and bolts necessary for connection to the heaters, however it does not include screws for attachment to the ceiling. 1288 900 1200 688 600988 900 388 300 688 600 388 300 PART No THHAC-005 THHAC-006 THHAC-007 THHAC-008 PACKAGED DIMENSIONS (mm) 300 x 150 x 50 WEIGHT (kg) 2 MATERIALS 316 SS 600 x 150 x 50 2 316 SS 900 x 150 x 50 2.5 316 SS 1200 x 150 x 50 3 316 SS NOTES Kit includes 2x300mm extension pole, screws and brackets Kit includes 2x600mm extension pole, screws and brackets Kit includes 2x900mm extension pole, screws and brackets Kit includes 2x1200mm extension pole, screws 17 Warranty Terms & Conditions The below Warranty Terms and Conditions apply for New Zealand and Australia only. For international warranty please refer to international warranty terms and conditions. Thermofilm warrants to the original owner that HEATSTRIP® Max products will be free from defects in materials and workmanship for a period of 24 months from the date of purchase in accordance with the following warranty terms and conditions. Provision of this warranty is subject to: The HEATSTRIP® product must be installed in accordance with the Installation Instructions and relevant electrical standards and codes. The HEATSTRIP® product must be maintained and cleaned according to instructions detailed in the Installation Manual. There is no warranty expressed or implied with regard to capacity requirements. The selection of the unit or units depends entirely upon the system design and capacities as determined by the purchaser. The customer has not repaired, opened or altered the product in any unauthorised manner. This warranty excludes damage to the product or components arising from circumstances outside the control of Thermofilm, including, but not limited to, where the product is not used for intended purpose; where the product has been rectified in any way; incorrect installation; incorrect power supply; damaged caused during delivery; misapplication, misuse, abuse, vandalism, lack of maintenance or accident. Thermofilm's obligations under this warranty are limited to repair or replacement at Thermofilm's factory of any components of the product which Thermofilm identifies to its satisfaction to be defective. Transportation charges involved in return of the product to the Thermofilm factory (or any other location authorised in writing by Thermofilm) is the sole responsibility of the customer. All products are inspected and tested before despatch and are at the risk of the purchaser after the shipment from the Thermofilm factory, if not delivered by Thermofilm to destination. Discolouration of the surface may occur after a period of time, this does not constitute a warrantable event. Twisting and bending of the heaters may occur, this does not constitute a warrantable event. No products or components will be supplied in advance of an examination of the faulty product or components by Thermofilm or an authorized representative of Thermofilm. Thermofilm does not participate in any site related costs or labour expenses incidental to replacement of parts, repairing, removing, installing, servicing, transportation or handling of parts to complete products, and assumes no liability on parts repaired or replaced without written authorisation. Thermofilm shall not be liable for any default or delay in performance of its warranty obligations caused by any circumstances beyond its control, including, but not limited to, judicial or government restrictions, strikes, fires, floods, abnormal weather conditions, delayed supply of components. Should products be determined as damaged on arrival, immediately notify the transport company of the condition and have them noted on the freight documents. If damage is discovered after unpacking, demand immediate inspection by the transportation company and insist that a record of the damage is made on the freight documentation. The customer warrants using the product in accordance with: Any instructions provided to it by Thermofilm from time to time. All government and local regulations, including but not limited to all relevant electrical, environmental laws and regulations governing the installation, storage, use, handling and maintenance of the goods. All necessary and appropriate precautions and safety measures relating to the installation, storage, use, handling and maintenance of goods. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. All warranty requests for repairs or replacements must be accompanied by a complete "Warranty Claim Form" available from Thermofilm, together with proof of purchase (and where possible, photos of the installation) and the heater returned to the place of purchase. In the event of a warranty claim, the goods need to be returned to the distributor/retailer for repair/replacement. Contact Thermofilm Australia Pty Ltd 17 Johnston Court, Dadenong South, Victoria 3175, Australia Telephone: (03) 9562 3455, Email: [email protected] 22Microsoft Publisher 2013