Modular Approval Request (per DA 00-1407)

bvos

Modular Approval Request

LITE-ON TECHNOLOGY CORP. WCBN4609L PPQ-WCBN4609L PPQWCBN4609L wcbn4609l

download (pdf)

WCBN4609L 802.11 B/G/N, 1 T1 R 2.4 G Hz Wlan Bluetooth 4.2 Module by LITE ON

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 1 Pages, 120.46KB

Document DEVICE REPORTWCBN4609L-Cover-Letter-s--LITE-ON-ppq-wcbn4609l-ex-1-1
RF_734_05 FCC Modular Approval Request

Page 1 of 3 28-12-2022

Modular Approval Request FCC (KDB 996369 D01 & Part 15.212)

FCC ID: PPQ-WCBN4609L

Items to be covered by Single modular transmitters.
1. The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly.

Answer from applicant
Yes, the modular transmitter has metal shielding.

. 2. The module must have buffered modulation/data inputs to ensure that
the device will comply with Part 15 requirements with any type of input signal. 3. The module must contain power supply regulation on the module
4. The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b).
5.The module must demonstrate compliance in a stand-alone configuration.
6.The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748).
. 7.The module must comply with all specific rules applicable to the transmitter,
including all the conditions provided in the integration instructions by the grantee.

Yes, the modular transmitter uses RTL8720CM-VH2-CG for buffered/ data inputs. Yes, the modular transmitter has its own power supply regulator. Yes, the antenna of the modular transmitter complies with FCC requirements. Yes, the modular transmitter is tested in a stand-alone configuration. Yes, when the module is installed inside another device, it will be labelled as " contain transmitter module" XXXXXXXXX" Yes, the user's manual has provide instructions to explain the requirements.

8.The module must comply with RF exposure requirements.

Yes, the radiated output power is far below the FCC radio frequency exposure limits.

Note: A limited modular approval (LMA) may be granted for single or split modular transmitters that comply partially with the requirements above.

Name and surname of applicant (or authorized representative): __ TC Wu_____

Date: __March 31, 2023__

Signature:



Related FCC IDs:

Search Any Device: