FH333018 DS-1681 说明书

User manual

Wonders Technology Co., Ltd. DS1681 Wireless Bluetooth Speaker WC2-DS1681 WC2DS1681 ds1681

DS1681 User manual (Wireless Bluetooth Speaker) by Wonders Technology

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 375.51KB

Document DEVICE REPORT3af5e49f95ba8fe6df73636029b488acc3f4956f 
SIZE95 X 148NN



Wireless Portable Bluetooth Speaker
Mode No.: DOSS SoundBox User Manual

I. Introduction
Thank you for purchasing the DOSS SoundBox Wireless Portable Bluetooth Speaker with Bluetooth and Hands free function. We encourage you to read this instruction guide thoroughly to get the most out of this innovative wireless portable speaker.
II. Package content
· One wireless portable speaker · USB charging cable · 3.5mm auxiliary cable · Travel waterproof pouch · User manual,Warranty card,Contact card

III. Product overview

1

3

2

54

Backlit touch-sensitive buttons

1. Mode switch: Touch

to toggle play mode among Bluetooth,

TF Card and Aux-in connection.

2. In Bluetooth mode/TF mode, touch to skip backward.

3. Play/Pause and handset button

· In Bluetooth mode,touch

to answer or end a call. Touch for 3

seconds to reject a call.

· In Bluetooth mode, touch

to play/pause your tune. Touch for 3

seconds to disconnect with your device.

· In TF mode, touch to play/pause your tune.

4. In Bluetooth mode/TF mode, touch to skip forward.

5. Volume control:

· Clockwise rotation to increase the volume.

· Counterclockwise rotation to decrease the volume.

6 7 8 9 10
6. Power button: Long press to turn the device on and off. 7. Auxiliary 3.5mm jack : Use it for cabled playback with compatible
devices. 8. TF card: Use it for TF card (with music) playback. 9. Charging port: Plug the supplied USB cable into this port to recharge
the built-in battery. 10. LED charging indicator.
· Charging : Steady Red. · Fully charged : Steady Green.
Status indicators

Center indicator/ Control button
Battery status indicator

Flashing blue
Steady blue
Steady red Steady Green Steady red Steady green

Indicates that the speaker has entered into the pairing mode and it is ready to be the first time
Indicates that the device is successfully paired
Indicates that the device has switched to the auxiliary input mode
Indicates that the device has switched to the TF mode
Battery is charging
Battery is fully charged

Wonders Technology Co.,Ltd Email:[email protected]

IV. Preparation
· Use the supplied USB cable to charge your portable speaker directly from your computer or device with a micro USB port.
· Make sure that the speaker is fully charged before using it for the first time.
· The portable speaker battery has to be initially charged for at least 12 hours. Thereafter, the battery will take from 2 to 3 hours to recharge.
· While charging, the LED glows red. When the battery has reached full capacity, the LED will change to green.
· To turn on the speaker, press and hold the power button for several seconds. Press and hold the power button once more to turn off the device.

Note The speaker will automatically shut down without any audio input in 15 minutes.

V. Pairing the wireless speaker with your smart device
1. Place your smart device and wireless speaker no more than one meter away from each other.
2. Press the power button located on the back of the speaker for several seconds to turn it on.
3. Set your smart device to "discover" the wireless speaker. Upon powering on, a tone will be heard, the blue LED will start flashing, accompanied by a prompt notifying that the speaker has entered into the pairing mode.
4. Enabled Bluetooth on your device and choose DOSS SoundBox from the list.
5. If pairing is successful, the LED will change to steady blue and your phone will confirm that the connection has been established. If the pairing process fails after 60 seconds, please repeat steps 1 through 5 described above.

VI. Answering and ending a call using your speaker or

mobile phone

1. When there is an incoming call, the speaker will generate a tone and

a verbal notification to alert you of this event.

2. Briefly press the Handset

button to pick up, long press to reject.

You may also press the answer button on your smart phone to take the

call using the speaker.

3. Speak with a clear voice right into the built-in microphone located on

the front section of the speaker.

4. To end a call, tap the Handset

button once again. Likewise, you

may also end the call directly using the command on your cell phone.

5. When listening to music using your smart phone, playback will resume

automatically once the call has ended.

VII. Product specifications
Product type: Wireless Portable Bluetooth Speaker with Built-in Microphone
Output power: 6W x 2 Driver unit: 1.5 inch speaker x 2 + 2.6 inch passive radiator Frequency response: 100Hz-18kHz Signal to noise ratio:  55dB Unit weight: 560 g Unit dimension: 6.6 x 2.7 x 2.9 inch Warranty: One-year limited

VIII. Power
· Battery type: Li-ion 3.7V, 2200mAh · Input:5V1A · Battery charge up time: 3 hours approximately (when fully depleted). · Battery playback time: up 12 hours (duration time may vary depending
on the volume level used and usage patterns).
IX.Wireless/Networking
· Bluetooth specification: V4.0+EDR, backwards compatible with previous Bluetooth versions
· Profiles supported · A2DP (Advanced Audio Distribution Profile) · Maximum operation range: 10 meters / 33 ft
X. Warning
· Do NOT drop, hit or shake the device. · Do NOT disassemble, repair or modify the Bluetooth speaker by yourself. · Do NOT use cleaning products that contain benzene, solvents or alcohol. · Do NOT expose the Bluetooth speaker to excessive heat or to direct
sunlight for long periods of time. · Do NOT store the device in a place with high humidity or dust. · Do NOT place heavy objects on top of the Bluetooth speaker. · Do NOT use near a microwave oven or wireless LAN products.

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Related FCC IDs:

Search Any Device: