Subject : requesting renewal of the 2

Jean-Pierre ORY

Limited Modular Approval Letter

Markem-Imaje Industries RMCIJ1 2AAW8-RMCIJ1 2AAW8RMCIJ1 rmcij1

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 214.10KB

Document DEVICE REPORTGetApplicationAttachment.html?id=7386475 
LIMITED MODULAR APPROVAL Attestation letter

May 27, 2024 Timco Engineering, Inc.

Re: Limited Modular Approval attestation letter

FCC ID:

2AAW8-RMCIJ1

IC:

11372A- RMCIJ1

Gentlemen,
The RMCIJ1 meets the requirements for limited modular approval as detailed in FCC Public notice 15.212 and IC RSS requirements. Limited single modular approval is sought as the modules will be installed in only Markem Imaje Industries products under our control.

Compliance to each of the requirements is described below.

Clauses

Manufacturer's arguments Limited Modular Approval

15.212 (a)(1)(i)

Shielding

None shielding provide, RMCIJ1 is compliant with all FCC part15C and RSS requirements without shielding. See Test
Report document.

15.212 (a)(1)(ii)

Buffered Data/Modulation

Chip is compliant with this rule.

15.212 (a)(1)(iii)

Power supply regulation

Chip is compliant with this rule

15.212 (a)(1)(iv)

Antenna

The RMCIJ1 was tested with one ceramic antenna, see "test report"

15.212 (a)(1)(v)

Stand-alone configuration

The RMCIJ1 was tested in a stand-alone configuration, see "Test setup photos" document.

15.212 (a)(1)(vi)

Label

See "Label" document and exhibition label sample

15.212 (a)(1)(vii)

Operating

The RMCIJ1 is compliant with all applicable FCC and IC rules. Details for maintaining compliance are given in the "User Manual".

15.212 (a)(1)(viii) RF Exposure

The RMCIJ1 is compliant with all applicable RF exposure requirements. See "RF exposure" document.

Please contact me if you have any further question. Best regards,
Jean Baptiste Palisse

Related FCC IDs:

Search Any Device: