MBC005 SPEC

Macintosh

Users Manual

X-Media Tech, Inc MBC005 Bluetooth module 2AJFZ-MBC005 2AJFZMBC005 mbc005

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 12 Pages, 999.85KB

Document DEVICE REPORTGetApplicationAttachment.html?id=3203000 
CSR Bluetooth Modules MBC005
Specification Version 1.1 05-Aug.-2016
Product No.: MBC005 Product Description: Bluetooth v3.0 Class 2 BT Stereo Module Issue Date: 2016/08/05 Release Version: 1.1

Revision
V0.1 V1.0 V1.1

Documentation History

Description
MBC005 MBC005 MBC005 with SPP profile

Date
Aug 2009 Jan 2012 Jan 2015

Remark

Content
Features ....................................................................................................................................................................4 Hardware & Technical Information.........................................................................................................................5 Mechanical Specification.........................................................................................................................................6 Reference Schematic................................................................................................................................................6 Electrical Characteristics .........................................................................................................................................7 Software specification..............................................................................................................................................9 Ordering Code........................................................................................................................................................10

Features
CSR BlueCore05 Chip. Bluetooth v3.0 Compliant. Bluetooth Class2 RF. Up to 10 meters transmission distance. Supported A2DP, HFP, AVRCP, PBAP(Phone Book Access Profile),SPP and Easy pairing. Fully configurable with simple AT style commands over UART and Bluetooth connections. On board printing antenna and external antenna versions. Support Single End Audio output. Dimension: 35X25X2.7mm. Castellated SMT pads or 10 PIN pitch 2.0mm connector easy and reliable PCB mounting.
Description
MBC005-CAR-AT audio transmitter/Receiver is power by CSR BC05 technology. That provides a complete 2.4GHz Bluetooth technology for stereo music transmission. The MBC005-CAR-AT module is compliant with Bluetooth specification v3.0 and support A2DP, AVRCP, HFP, SPP and PBAP(Phone Book Access Profile). It is the class 2 module with build in antenna. Reduce the effort on the RF section when the engineer designs it into the system. SmartDesign also customize the software to meet the requirement from customer.
Block Diagram
MBC005 Class2 Module Block Diagram

Hardware & Technical Information

Pin Definition

PIN Name

Type

1 R_SPK

O

2 L_SPK

O

3 SPK_GND O

4 MIC+

I

5 MIC-

I

6 VCC

PWR

7 GND

PWR

8 TX

O

9 RX

I

10 INT

O

11 GND

PWR

12 GND

PWR

13 GND

PWR

Note Right side audio out put Left side side audio output Ground for speaker Microphone + Microphone Power input Ground UART TX UART RX Interrupt Ground Ground Ground

VCC Supply voltage at this pin with 5 V. GND Connect GND pins to the ground plane of the PCB. RX RX is used to implement UART data transfer from another device to MBC005-CAR-AT. The UART interface requires an external RS232 transceiver chip. TTL level. TX TX is used to implement UART data transfer from MBC005-CAR-AT to another device. TTL level. L_SPK Left channel audio output. The audio output line is the single-ended. Use low impedance ground plane dedicated for the audio signals. R_SPK Right channel audio output. The audio output line is the single-ended. Use low impedance ground plane dedicated for the audio signals SPK_GND Audio ground. Connect to right and left Audio line. MIC+ and MICAudio inputs. This audio input can be configured to microphone or line input. Route differential pairs close to each other and use a solid dedicated audio ground plane for the audio signals. INT Interrupt output. Normally keep in "Low". Change to "High" when Audio output.

Mechanical Specification

10 PINs Pitch 2.0 MBC005 CLASS2 Mechanical Specification
Reference Schematic

unit: mm

Electrical Characteristics
 Voltage Input
Supply Voltage
 Power Consumption
Mode Standby HFP A2DP Link
 Operating Conditions
Voltage Range Operating Temperature Range Storage Temperature Range Relative Humidity (Operating) Relative Humidity (Storage)

MIN

Typ.

3.5

5

Avg. 10mA 26mA 39mA 11mA

3.5-5.3V -20°C ~ 70°C -30°C ~ 80°C
<=90% <=90%

MAX

Unit

5.3

V

Radio Characteristics

Frequency MIN

(GHz)

2.402

-84

Sensitivity at 0.1%BER

2.441

-84

2.480

-84

2.402

-2

RF Transmit Power

2.441

-2

2.480

-2

Initial Carrier Frequency Tolerance

2.402 2.441 2.480

-

20dB bandwidth

-

for modulated carrier

Drift (Five slots packet)

-

Drift Rate

-

f1 avg "Maximum Modulation"

2.402 2.441 2.480

140 140 140

f2 max "Minimum Modulation"

2.402 2.441 2.480

115 115 115

TYP MAX BT Spec

Unit

-80

-

-80

-

-80

-

0

4

0

4

0

4

5

75

5

75

5

75

900 1000

<= -70 <= 4 75 <=1000

dBm dBm dBm dBm dBm dBm kHz kHz kHz kHz

15

-

40

kHz

13

-

20

kHz

165

175

kHz

165

175 140 < f1 avg kHz

165

175

kHz

190

-

kHz

190

-

115

kHz

190

-

kHz

Software specification

Profile Model name \
Profile
Control Flash Memory
Command Manual
A2DP HFP AVRCP PBAP SPP

MBC005-AT2
AT command 16 MB
A2DP_AT_Commands_v2.0d
V V V V V

Software function
MBC005-CAR-AT will act only when you send AT command. Detailed AT command, please check the document.

Default setting Information

Parameter 1 Baud Rate 2 Pin Code Prompt
3 Local Name 4 SYNC/AG

Value 9600 0000
MBC005-CAR SYNC module

Ordering Code
Order code
MBC005-AT2

Description
MBC005-CAR-AT with A2DP, HFP, AVRCP, PBAP , SPP AT command profile

Remark

Federal Communications Commission (FCC) Statement
15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.
15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device.
The end product with this module may subject to perform FCC part 15 unintentional emission test requirement and be properly authorized.
This device is intended for OEM integrator only.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

USERS MANUAL OF THE END PRODUCT:
The end user has to be informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following " Contains TX FCC ID: 2AJFZ-MBC005 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Related FCC IDs:

Search Any Device: