OWNER'S MANUAL
Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.ws. PLEASE READ AND SAVE THESE INSTRUCTIONS. MULTI FUNCTIONAL BLOWER FAN. OWNER'S MANUAL.
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 12 Pages, 748.80KB
Document DEVICE REPORTmedia.nl?id=748498&c=1043140&h=ae7d0cbb6ec2af7493c3& xt=MULTI FUNCTIONAL BLOWER FAN OWNER'S MANUAL X-400 / P-400 / X-430 XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 www.xpower.ws PLEASE READ AND SAVE THESE INSTRUCTIONS Index Introduction ............................................................................................................................... 2 Operation / Instructions................................................................................................................3 Safety Instructions...................................................................................................................... 4 Maintenance Instructions / Troubleshooting............................................................................... 5 Specifications.............................................................................................................................. 6 Warranty / Service ..................................................................................................................... 7 Parts List .................................................................................................................................... 8 Accessories ............................................................................................................................... 9 Warranty Registration Form ....................................................................................................... 10 Introduction XPOWER Blowers / Fans are ETL & C-ETL Certified Professional Level Multi Functional Blowers / Fans with the most efficient engineering design. Features: · Low 3 Amp draw with high velocity of over 1600 to 2000 CFM · Super quiet and super light weight · Easy clean filter system · Easy carrying and stackable · Easily disassembled for thorough cleaning and service · 20 foot cord with easy cord wrap design · Safety screens on open vents · 3 speed switch · 4 positions (0°, 20°, 45°, 90°) 0° 20° 45° 90° · Durable and rugged housing with a 5 Year Warranty Operation / Instructions The XPOWER High Velocity Blower / Fan is intended to move air and to dry floors, walls, furniture etc. Durable and easy to operate with an effective balance of static pressure and airflow suitable for a variety of applications. 1. XPOWER Blowers / Fans are shipped ready to be put into service. Prior to plugging in the unit into the power source inspect the unit completely for any shipping damage. 2. Plug the electrical cord into a 3-prong GFCI outlet. 3. Carefully place the Blower / Fan unit on a stable flat dry surface. 4. The unit has a four position capability to aim airflow across flat surfaces or angled upward. 5. Turn the switch to the desired speed and make sure it is operating correctly 6. All Blowers / Fans in operation must be supervised at all times. Timer Instruction (Applicable for Model X-430) Use the Timer to set the preferred time from 1 min to 180 min. BLOWER / FAN STORAGE: Stackable Units can be stacked (up to 4) on their sides for storage. NOTICE: 1.Stacking feature is not secure for transportation. 2.Remove the filters before stacking. Safety Instructions 1. To prevent electric shock, do not operate unit in standing water. Never plug in or unplug the unit with wet hands or while standing in water. 2. To avoid risk of injury, do not direct air flow at face or body. 3. To reduce the risk of fire or electric shock, do not use unit with any solid-state speed control device. 4. Use only with GFCI protected receptacles. Please contact a qualified electrician for verification and/or installation of a GFCI receptacle if necessary. 5. Do not operate any unit with a damaged cord or plug. Discard unit or return to an authorized service facility for examination and/or repair. 6. Unplug the unit from the power source before servicing or cleaning. 7. Do not run the power cord under carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the power cord away from traffic area to prevent tripping. 8. Do not allow children to play with or around Blower / Fan. 9. Do not move or carry a Blower / Fan when unit is operating. 10. All Blower / Fan in operation must be supervised at all times. Maintenance Instructions 1. To keep the Blower / Fan clean use a damp cloth to wipe the surface of the housing. 2. Never clean the unit with water. 3. When not in use unplug and store the Blower / Fan in a dry indoor place out of reach of children. 4. Always disconnect the XPOWER Blower / Fan from its power source before performing any maintenance or cleaning. 5. Clean the filters (optional item) as often as necessary to avoid loss of airflow. Troubleshooting For any problems not listed below, call your local distributor or contact our Service Department. PROBLEM POSSIBLE CAUSE SOLUTION No power input Plug in the blower; check circuit breaker Blower / Fan not running Blower vibrates excessively Switch not turned on Unit fan jammed Intake or exhaust blocked Accumulation of dirt on fan blade Turn on switch Remove material jamming fan wheel Turn unit off and allow to cool, then remove blockage Clean blower blade Specifications Model Volt / Cycle Power Max Amp Weight Speeds Size (H x W x D) Cord Length Overheating Protecting Rated Airflow (On High) Positions Housing Safety Marks Filter System X-400 115V / 60Hz 1/4 hp 3A 16 lbs Three 15x 13.50 x 15 inch 20 ft Dual Thermal Protectors 1600 CFM 4(0°, 20°, 45°, 90°) ABS ETL / C-ETL Optional P-400 115V / 60Hz 1/4 hp 3A 15 lbs Three 15x 13.50 x 15 inch 20 ft Dual Thermal Protectors 1600 CFM 4(0°, 20°, 45°, 90°) PP ETL / C-ETL Optional X-430 115V / 60Hz 1/3 hp 3.8A 17 lbs Three 15x 13.50 x 15 inch 20 ft Dual Thermal Protectors 2000 CFM 4(0°, 20°, 45°, 90°) ABS ETL / C-ETL Optional XPOWER Limited Warranty XPOWER Warranty covers the unit from defects in materials and craftsmanship. The Warranty covers normal use for a term of one year from original date of purchase; including parts, labor and one way shipping. XPOWER Blower / Fan Housing is covered for a term of five years from the date of the original purchase. Important ! Warranty does not cover signs of misuse including, but not limited to, a unit that has been dropped, subjected to water damage, tampered with, improper voltage use and unauthorized maintenance and repairs. The POWER CORD and FILTERS are not covered by the warranty. Service In order to receive service or replacement parts under warranty, you must: A. Call for an RMA (Return Merchandise Authorization Number and Service Department address). B. Have proof of purchase. The end user will be responsible to ship the unit (with RMA Number showing on the shipping label) to the XPOWER Service Department. Upon inspection, we will advise you of the repairs needed and the cost (if applicable). XPOWER will provide repair or replacement parts depending on warranty. 400 Series Parts List Item No. Parts Name Item No. Parts Name 400-1 400-3 Left Housing Switch Plate 400-2 400-4 Grid Cover (Motor Side) Switch Knob 400-5 Switch 400-6 Motor 400-7 Right Housing 400-8 Power Cord 400-9 400-11 Fan Air Outlet Grid Cover 400-10 400-12 Grid Cover (Fan Side) Kick Stand 400-13 400-15 Filter I (Motor Side) 400-14 Rubber Feet (Not Show) 400-16 Filter II (Fan Side) Screws and Nuts (Not Shown) 8 13 1 2 7 3 4 6 5 9 10 14 11 12 Accessories 1. Filters(Optional) A set of Filters is available for the XPOWER Blowers / Fans which will help prevent small debris and dust from entering the unit. To clean the filters: Remove the filters from the unit and wash with warm soapy water, rinse with clean water and let dry thoroughly before reinstalling. Installation: Filters snaps into the air inlets. Note: The filter I is Motor Side, The filter II is for the Fan Side. Filter Removal:: Pull the filters out of the unit. Note: After cleaning make sure the filters are dry before reinstalling. 2. Cage Drying Kit For the Professional Pet Grooming Industry The Kit includes Blower / Fan Adapter, three 8 Foot Hoses and three Airflow Adjustment Doors. Airflow adjustment door Hooks for easy hanging WARRANTY REGISTRATION Please complete and mail or fax for your product warranty, for multiple units, please list serial numbers on a separate sheet of paper. Address: XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302 Your Name / Company Name Contact Name Title Address City State Zip Phone Fax E-mail Blower / Fan Information Model # Serial # : Date of Purchase / / Purchased From Additional Comments/Suggestions From: TO: XPOWER MANUFACTURE, INC. 220 Clary Avenue San Gabriel, CA 91776, USA Tel: 626-285-3301, Fax: 626-285-3302Acrobat Distiller 6.0 (Windows)