ETSI 301 489-17 V1

Sem

Test Report

L&S; Italia S.p.A. SMARTUP1 Remote Control 2ARW2-SMARTUP1 2ARW2SMARTUP1 smartup1

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 25 Pages, 1.14MB

Document DEVICE REPORTGetApplicationAttachment.html?id=7389112
TEST REPORT

Reference No....................... : FCC ID.................................... : Applicant............................... : Address................................. : Manufacturer........................ : Address................................. : Product Name...................... : Model No............................... : Standards.............................. : Date of Receipt sample..... : Date of Test........................... : Date of Issue........................ : Test Report Form No.......... : Test Result............................ :

WTF24X04070923W001 2ARW2-SMARTUP1 L&S ltalia SpA Viale Lino Zanussi, 8-33070 Maron di Brugnera (PN)-ITALY Nexta Tech - Brand of TEAM srl Via Gugliermo Oberdan, 90 - 33074 Fontanafredda (PN) - ITALY Remote Control SMART UP 1 FCC Part 15.231 2024-04-01 2024-04-01 to 2024-04-17 2024-04-17 WTX_Part 15_231W Pass

Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of approver.
Prepared By: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China Tel.: +86-755-33663308 Fax.: +86-755-33663309 Email: [email protected]

Tested by:

Approved by:

Dashan Chen

Jason Su

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 1 of 25

Reference No.: WTF24X04070923W001
TABLE OF CONTENTS
1. GENERAL INFORMATION .....................................................................................................................................4 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ........................................................................4 1.2 TEST STANDARDS ................................................................................................................................................. 5 1.3 TEST METHODOLOGY ........................................................................................................................................... 5 1.4 TEST FACILITY .......................................................................................................................................................5 1.5 EUT SETUP AND TEST MODE ..............................................................................................................................6 1.6 MEASUREMENT UNCERTAINTY ............................................................................................................................. 7 1.7 TEST EQUIPMENT LIST AND DETAILS .................................................................................................................. 8
2. SUMMARY OF TEST RESULTS ......................................................................................................................... 10
3. ANTENNA REQUIREMENT ................................................................................................................................. 11 3.1 STANDARD APPLICABLE ......................................................................................................................................11 3.2 TEST RESULT ...................................................................................................................................................... 11
4. RADIATED EMISSIONS ........................................................................................................................................12 4.1 STANDARD APPLICABLE ......................................................................................................................................12 4.2 TEST PROCEDURE .............................................................................................................................................. 13 4.3 CORRECTED AMPLITUDE & MARGIN CALCULATION ..........................................................................................14 4.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................ 14
5. 20DB BANDWIDTH ................................................................................................................................................18 5.1 STANDARD APPLICABLE ......................................................................................................................................18 5.1 TEST PROCEDURE .............................................................................................................................................. 18 5.2 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................ 18
6. TRANSMISSION TIME .......................................................................................................................................... 20 6.1 STANDARD APPLICABLE ......................................................................................................................................20 6.2 TEST PROCEDURE .............................................................................................................................................. 20 6.3 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................ 20
7. DUTY CYCLE .......................................................................................................................................................... 22 7.1 STANDARD APPLICABLE ......................................................................................................................................22 7.2 TEST PROCEDURE .............................................................................................................................................. 22 7.3 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................ 22
8. CONDUCTED EMISSIONS ...................................................................................................................................24 8.1 TEST PROCEDURE .............................................................................................................................................. 24 8.2 BASIC TEST SETUP BLOCK DIAGRAM ................................................................................................................24 8.3 TEST RECEIVER SETUP ...................................................................................................................................... 24 8.4 SUMMARY OF TEST RESULTS/PLOTS ................................................................................................................ 24
APPENDIX PHOTOGRAPHS ................................................................................................................................... 25

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 2 of 25

Reference No.: WTF24X04070923W001

Report version

Version No. Rev.00 /

Date of issue 2024-04-17
/

Description Original /

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 3 of 25

Reference No.: WTF24X04070923W001

1. GENERAL INFORMATION

1.1 Product Description for Equipment Under Test (EUT)

General Description of EUT

Product Name:

Remote Control

Trade Name:

/

Model No.:

SMART UP 1

Adding Model(s):

SMART UP 1 MONO

Rated Voltage:

DC3V

Power Adaptor :

/

Note: The test data is gathered from a production sample provided by the manufacturer. The appearance of

others models listed in the report is different from main-test model SMART UP 1, but the circuit and the

electronic construction do not change, declared by the manufacturer.

Technical Characteristics of EUT

Frequency Range:

433.92MHz

Max. Field Strength:

433.92MHz: 78.72dBuV/m(3m)

Data Rate:

/

Modulation:

OOK

Antenna Type:

PCB Antenna

Antenna Gain:

-17.65dBi

Note The Antenna Gain is provided by the customer and can affect the validity of results.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 4 of 25

Reference No.: WTF24X04070923W001
1.2 Test Standards
The tests were performed according to following standards:
FCC Rules Part 15.231: Periodic operation in the band 40.66-40.70MHz and above 70MHz. ANSI C63.10-2013: American National Standard for Testing Unlicensed Wireless Devices.
Maintenance of compliance is the responsibility of the manufacturer. Any modification of the product, which result in lowering the emission/immunity, should be checked to ensure compliance has been maintained.
1.3 Test Methodology
All measurements contained in this report were conducted with ANSI C63.10-2013, the equipment under test (EUT) was configured to measure its highest possible emission level. The test modes were adapted accordingly in reference to the Operating Instructions.
1.4 Test Facility
Address of the test laboratory Laboratory: Waltek Testing Group (Shenzhen) Co., Ltd. Address: 1/F., Room 101, Building 1, Hongwei Industrial Park, Liuxian 2nd Road, Block 70 Bao'an District, Shenzhen, Guangdong, China
FCC ­ Registration No.: 125990 Waltek Testing Group (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. The Designation Number is CN5010, and Test Firm Registration Number is 125990.
Industry Canada (IC) Registration No.: 11464A The 3m Semi-anechoic chamber of Waltek Testing Group (Shenzhen) Co., Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 11464A and the CAB identifier is CN0057.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 5 of 25

Reference No.: WTF24X04070923W001
1.5 EUT Setup and Test Mode
The EUT was operated at continuous transmitting mode that was for the purpose of the measurements. All testing shall be performed under maximum output power condition, and to measure its highest possible emissions level, more detailed description as follows:

Test Mode List Test Mode TM1

Description Transmitting

Test Conditions Temperature:
Relative Humidity: ATM Pressure:

EUT Cable List and Details Cable Description /

Length (m) /

Special Cable List and Details Cable Description /

Length (m) /

Remark 433.92MHz
22~25 C 50~55 %. 1019 mbar

Shielded/Unshielded /

With / Without Ferrite /

Shielded/Unshielded /

With / Without Ferrite /

Auxiliary Equipment List and Details

Description

Manufacturer

/

/

Model /

Serial Number /

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 6 of 25

Reference No.: WTF24X04070923W001
1.6 Measurement Uncertainty
Measurement uncertainty Parameter
Occupied Bandwidth Conducted Spurious Emission
Transmission Time Conducted Emissions
Transmitter Spurious Emissions

Conditions Conducted Conducted Conducted Conducted
Radiated

Uncertainty ±1.5% ±2.17dB ±5%
9-150kHz ±3.74dB 0.15-30MHz ±3.34dB 30-200MHz ±4.52dB
0.2-1GHz ±5.56dB 1-6GHz ±3.84dB 6-18GHz ±3.92dB

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 7 of 25

Reference No.: WTF24X04070923W001

1.7 Test Equipment List and Details

Fixed asset Number

Description

WTXE1004A Spectrum

1-001

Analyzer

Chamber A: Below 1GHz

WTXE1005A Spectrum

1003

Analyzer

WTXE1001A EMI Test

1001

Receiver

WTXE1007A 1001

Amplifier

WTXE1010A Loop Antenna
1007

WTXE1010A Broadband

1006

Antenna

Chamber A: Above 1GHz

WTXE1005A Spectrum

1003

Analyzer

WTXE1001A EMI Test

1001

Receiver

WTXE1065A 1001

Amplifier

WTXE1010A Horn Antenna
1005

WTXE1010A DRG Horn

1010

Antenna

WTXE1003A Pre-amplifier
1001

Chamber B:Below 1GHz

WTXE1010A 1006

Trilog Broadband
Antenna

WTXE1038A 1001

Amplifier

WTXE1001A EMI Test

1002

Receiver

Chamber C:Below 1GHz

WTXE1093A EMI Test

1001

Receiver

WTXE1010A

Trilog

1013-1

Broadband

Manufacturer Rohde & Schwarz
Rohde & Schwarz Rohde & Schwarz
HP
Schwarz beck
Schwarz beck
Rohde & Schwarz Rohde & Schwarz
C&D
ETS
A.H. SYSTEMS
Schwarzbeck
Schwarz beck
Agilent Rohde & Schwarz
Rohde & Schwarz Schwarz beck

Model FSP40
FSP30 ESPI 8447F FMZB 1516 VULB9163
FSP30 ESPI PAP-1G18 3117 SAS-574 BBV 9721
VULB9163(B) 8447D ESPI
ESIB 26 VULB 9168

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 8 of 25

Serial No. Cal Date Due. Date 100612 2024-02-27 2025-02-26

836079/03 2024-02-24 2025-02-23
5 101611 2024-03-19 2025-03-18 2805A034
2024-02-24 2025-02-23 75 9773 2024-02-26 2025-02-25
9163-333 2024-02-24 2025-02-23

836079/03 2024-02-24 2025-02-23
5 101611 2024-03-19 2025-03-18

2002 2024-02-27 2025-02-26

00086197 2024-02-26 2025-02-25

571

2024-03-17 2025-03-16

9721-031 2024-02-29 2025-02-28

9163-635 2024-03-17 2027-03-16 2944A104
2024-02-24 2025-02-23 57 101391 2024-02-24 2025-02-23
100401 2024-02-27 2025-02-26 1194 2021-05-28 2024-05-27

Reference No.: WTF24X04070923W001

Antenna

WTXE1007A 1002

Amplifier

WTXE1010A Loop Antenna
1007

Chamber C: Above 1GHz

WTXE1093A EMI Test

1001

Receiver

WTXE1103A Horn Antenna
1005

WTXE1103A 1006

Amplifier

WTXE1010A DRG Horn

1010

Antenna

WTXE1003A Pre-amplifier
1001

Conducted Room 1#

WTXE1104A EMI Test

1029

Receiver

WTXE1002A Pulse Limiter
1001

WTXE1003A 1001

AC LISN

Conducted Room 2#

WTXE1001A EMI Test

1004

Receiver

WTXE1003A 1003

LISN

HP
Schwarz beck
Rohde & Schwarz POAM
Tonscend
A.H. SYSTEMS
Schwarzbeck
Rohde & Schwarz Rohde & Schwarz Schwarz beck
Rohde & Schwarz Rohde & Schwarz

8447F FMZB 1516
ESIB 26 RTF-118A TAP01018050 SAS-574 BBV 9721
ESCI ESH3-Z2 NSLK8126
ESPI ENV 216

2944A038 2024-02-24 2025-02-23
69 9773 2024-02-26 2025-02-25

100401 2024-02-27 2025-02-26

1820 2023-03-10 2026-03-09

AP22E806 2024-02-27 2025-02-26
235

571

2024-03-17 2025-03-16

9721-031 2024-02-29 2025-02-28

100525 2023-12-12 2024-12-11 100911 2024-02-24 2025-02-23 8126-279 2024-02-24 2025-02-23

101259 2024-02-24 2025-02-23 100097 2024-02-24 2025-02-23

Description EMI Test Software (Radiated Emission)* EMI Test Software (Conducted Emission Room
1#)* EMI Test Software (Conducted Emission Room
2#)*

Software List Manufacturer
Farad
Farad
SKET

Model EZ-EMC EZ-EMC
EMC-I

*Remark: indicates software version used in the compliance certification testing.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 9 of 25

Version RA-03A1 RA-03A1
V2.0

Reference No.: WTF24X04070923W001
2. SUMMARY OF TEST RESULTS

FCC Rules §15.203 §15.205 §15.209
§15.231(a) §15.231(b) §15.231(c) §15.207(a)
N/A: not applicable.

Description of Test Item Antenna Requirement Restricted Band of Operation Radiated Spurious Emissions Deactivation Testing Radiated Emissions 20dB Bandwidth Testing Conducted Emission

Result Compliant Compliant Compliant Compliant Compliant Compliant
N/A

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 10 of 25

Reference No.: WTF24X04070923W001
3. Antenna Requirement
3.1 Standard Applicable
According to FCC Part 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section.
3.2 Test Result
This product has a PCB antenna, fulfill the requirement of this section.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 11 of 25

Reference No.: WTF24X04070923W001
4. Radiated Emissions
4.1 Standard Applicable
According to §15.231(b), the field strength of emissions from intentional radiators operated under this section shall not exceed the following:

The limits on the field strength of the spurious emissions in the above table are based on the fundamental frequency of the intentional radiator. Spurious emissions shall be attenuated to the average (or, alternatively, CISPR quasi-peak) limits shown in this table or to the general limits shown in §15.209, whichever limit permits a higher field strength.
The emission limit in this paragraph is based on measurement instrumentation employing an average detector. The provisions in §15.35 for limiting peak emissions apply. Spurious Radiated Emissions measurements starting below or at the lowest crystal frequency.
Compliance with the provisions of §15.205 shall be demonstrated using the measurement instrumentation specified in that section.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 12 of 25

Reference No.: WTF24X04070923W001
4.2 Test Procedure
The setup of EUT is according with per ANSI C63.10-2013 measurement procedure. The specification used was with the FCC Part 15.205 15.231(b) and FCC Part 15.209 Limit. The test setup for emission measurement below 30MHz.

Semi-anechoic 3m Chamber Turn Table From 0°to 360°

3m EUT

0.8m

Turn Table

PC System

Spectrum Analyzer

AMP

The test setup for emission measurement from 30MHz to 1GHz.

Combining Network

Semi-anechoic 3m Chamber Antenna Elevation Varies From 1 to 4m Turn Table From 0°to 360°
3m
EUT

0.8m

Turn Table

PC System

Spectrum Analyzer

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 13 of 25

AMP

Combining Network

Reference No.: WTF24X04070923W001 The test setup for emission measurement above 1GHz.

Anechoic 3m Chamber

Antenna Elevation Varies From 1 to 4m

Turn Table From 0°to 360°

EUT

3m

1.5m

Turn Table

Absorbers

PC System

Spectrum Analyzer

AMP

Combining Network

4.3 Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Factor and the Cable Factor, and subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:
Corr. Ampl. = Indicated Reading +Ant.Loss +Cab. Loss ­ Ampl.Gain
The "Margin" column of the following data tables indicates the degree of compliance with the applicable limit. For example, a margin of -6dBV means the emission is 6dBV below the maximum limit. The equation for margin calculation is as follows:
Margin = Corr. Ampl. ­ FCC Part 15C Limit
4.4 Summary of Test Results/Plots
Note: this EUT was tested in 3 orthogonal positions and the worst case position data was reported.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 14 of 25

Reference No.: WTF24X04070923W001

Test Mode

TM1

Polarity:

Horizontal

No. Frequency Reading Corr.

MHz

dBuV/m Factor

(dB)

1 436.3956 83.68 -4.96

/

/

/

/

2 827.1795 37.18 0.54

/

/

/

/

Duty cycle Factor (dB) N/A 0.00 N/A 0.00

Result

Limit Margin Deg. Height Remark

dBuV/m dBuV/m (dB)

( °) (cm)

78.72 100.83 -22.11 -

78.72 80.83 -2.11

-

37.72 80.83 -43.11 -

37.72 60.83 -23.11 -

-

peak

-

Ave

-

peak

-

Ave

Above 1GHz
No. Frequency Reading

Corr.

MHz

dBuV/m Factor

(dB)

1 1301.760 52.23 -23.32

/

/

/

/

2 2169.600 53.52 -19.30

/

/

/

/

3 3913.633 55.34 -14.69

/

/

/

/

Duty cycle Factor (dB) N/A 0.00 N/A 0.00 N/A 0.00

Result

Limit Margin Deg. Height Remark

dBuV/m dBuV/m

dB

(°) (cm)

28.91 74.00 -45.09 28.91 54.00 -25.09 34.22 80.83 -46.61 34.22 60.83 -26.61 40.65 74.00 -33.35 40.65 54.00 -13.35 -

-

Peak

-

Ave

-

Peak

-

Ave

-

Peak

-

Ave

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 15 of 25

Reference No.: WTF24X04070923W001

Test Mode

TM1

Polarity:

Vertical

No. Frequency Reading Corr. Dutycycle Result

Limit Margin Deg. Height Remark

MHz

dBuV/m Factor Factor dBuV/m dBuV/m (dB)

( °) (cm)

(dB)

(dB)

1 436.3956 70.76 -4.96

N/A

65.80 100.83 -35.03 -

-

peak

/

/

/

/

0.00

65.80 80.83 -15.03 -

-

Ave

2 833.0127 43.37 0.59

N/A

43.96 80.83 -36.87 -

-

peak

/

/

/

/

0.00

43.96 60.83 -16.87 -

-

Ave

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 16 of 25

Reference No.: WTF24X04070923W001

Above 1GHz
No. Frequency MHz

1 1301.760

/

/

2 2169.600

/

/

3 3913.633

/

/

Reading dBuV/m
52.03 /
53.52 /
55.58 /

Corr. Factor
(dB) -23.32
/ -19.30
/ -14.69
/

Dutycycle Factor (dB) N/A 0.00 N/A 0.00 N/A 0.00

Result dBuV/m
28.71 28.71 34.22 34.22 40.89 40.89

Limit dBuV/m
74.00 54.00 80.83 60.83 74.00 54.00

Margin dB
-45.29 -25.29 -46.61 -26.61 -33.11 -13.11

Deg. (°)
-

Height Remark (cm)

-

Peak

-

Ave

-

Peak

-

Ave

-

Peak

-

Ave

Note: Testing is carried out with frequency rang 9kHz to the tenth harmonics, other than listed in the table above are attenuated more than 20dB below the permissible limits or the field strength is too small to be measured.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 17 of 25

Reference No.: WTF24X04070923W001
5. 20dB Bandwidth
5.1 Standard Applicable
According to FCC Part 15.231(c), the bandwidth of the emission shall be no wider than 0.25% of the center frequency for devices operating above 70MHz and below 900MHz. Bandwidth is determined at the points 20dB down from the modulated carrier.
5.1 Test Procedure
With the EUT's antenna attached, the EUT's 20dB Bandwidth power was received by the test antenna, which was connected to the spectrum analyzer with the START, and STOP frequencies set to the EUT's operation band.

5.2 Summary of Test Results/Plots

Test Frequency

20dB Bandwidth

Limit

MHz

kHz

kHz

433.92

7.70

1084.80

Limit = Fundamental Frequency * 0.25% = 433.92MHz * 0.25% = 1084.75 kHz

Result Pass

Please refer to the attached plots.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 18 of 25

Reference No.: WTF24X04070923W001 433.92MHz

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 19 of 25

Reference No.: WTF24X04070923W001

6. Transmission Time

6.1 Standard Applicable
According to FCC Part 15.231(a), the transmitter shall be complied the following requirements:

1) A manually operated transmitter shall employ a switch that will automatically deactivate the transmitter within not more than 5 seconds of being released. (2) A transmitter activated automatically shall cease transmission within 5 seconds after activation. (3) Periodic transmissions at regular predetermined intervals are not permitted. However, polling or
supervision transmissions, including data, to determine system integrity of transmitters used in security or safety applications are allowed if the total duration of transmissions does not exceed more than two seconds per hour for each transmitter. There is no limit on the number of individual transmissions, provided the total transmission time does not exceed two seconds per hour.
6.2 Test Procedure

With the EUT's antenna attached, the EUT's output signal was received by the test antenna, which was connected to the spectrum analyzer. Set the center frequency to 433.92MHz, than set the spectrum analyzer to Zero Span for the release time reading. During the testing, the switch was released then the EUT automatically deactivated.
6.3 Summary of Test Results/Plots

Transmission Type Test Frequency(MHz)

Manually

433.92

Transmission Time(s) 0.47

Limit(s) 5

Result Pass

Please refer to the attached plots.

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 20 of 25

Reference No.: WTF24X04070923W001 433.92MHz

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 21 of 25

Reference No.: WTF24X04070923W001
7. Duty Cycle
7.1 Standard Applicable
According to FCC Part 15.231 (b)(2) and 15.35 (c), for pulse operation transmitter, the averaging pulsed emissions are calculated by peak value of measured emission plus duty cycle factor.
7.2 Test Procedure
With the EUT's antenna attached, the EUT's output signal was received by the test antenna, which was connected to the spectrum analyzer. Set the center frequency to 433.92MHz, than set the spectrum analyzer to Zero Span for the release time reading. During the testing, the switch was released then the EUT automatically deactivated.
7.3 Summary of Test Results/Plots
Duty Cycle=100% Duty Cycle Factor=20*log(100/100)=0
Please refer to the attached test plots:

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 22 of 25

Reference No.: WTF24X04070923W001 433.92MHz
Duty Cycle 1
Duty Cycle 2

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 23 of 25

Reference No.: WTF24X04070923W001
8. Conducted Emissions
8.1 Test Procedure
The setup of EUT is according with per ANSI C63.10:2013 measurement procedure. The specification used was with the FCC Part 15.207 Limit. The external I/O cables were draped along the test table and formed a bundle 30 to 40cm long in the middle. The spacing between the peripherals was 10cm.
8.2 Basic Test Setup Block Diagram

8.3 Test Receiver Setup
During the conducted emission test, the test receiver was set with the following configurations:
Start Frequency............................................................................. 150kHz Stop Frequency............................................................................. 30MHz Sweep Speed.................................................................................Auto IF Bandwidth.................................................................................. 10kHz Quasi-Peak Adapter Bandwidth.................................................. 9kHz Quasi-Peak Adapter Mode...........................................................Normal
8.4 Summary of Test Results/Plots
Not applicable

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 24 of 25

Reference No.: WTF24X04070923W001
APPENDIX PHOTOGRAPHS
Please refer to "ANNEX" ***** END OF REPORT *****

Waltek Testing Group (Shenzhen) Co., Ltd.

Http://www.waltek.com.cn

Page 25 of 25



Related FCC IDs:

Search Any Device: