Assembly Manual PDF
STAND-TV07-S Black Stand for 13" to 42" TVs with Storage Shelf – VIVO - desk solutions, screen mounting, and more
Assembly Manual PDF (2.98MB)
Black Stand For 13" To 42" Tvs With Storage Shelf
Black Stand for 13" to 50" Screens with Shelf – VIVO - desk solutions, screen mounting, and more
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 8 Pages, 2.98MB
Document DEVICE REPORTSTAND-TV07-S REV1 online ?v=1626882874Black TV Stand with Storage Shelf Instruction Manual SKU: STAND-TV07-S Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/stand-tv07-s GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST [email protected] www.vivo-us.com Chat live with an agent! 309-278-5303 WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. TIPOVER WARNING SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER: · NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV CART. · USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER. PACKAGE CONTENTS A (x1) Base B (x2) Feet C (x1) Center Pole D (x1) VESA Plate E (x2) VESA Adapter F (x2) VESA Adapter G (x1) Plastic Cover H (x1) Shelf I (x1) Shelf Bracket J (x8) M5x10mm Bolt K (x8) M5 Lock Nut L (x5) M6x65mm Carriage Bolt M (x5) D6 Washer N (x5) M6 Lock Nut S (x1) 5mm Allen Wrench T (x1) Wrench O (x1) M6 Flange Nut P (x4) M6x12mm Bolt Q (x2) M6x60 Socket Head Bolt R (x1) 4mm Allen Wrench M-A (x4) M4x14 M-B (x4) M5x14 M-C (x4) M6x14 M-D (x4) M8x20 M-E (x4) D5 Washer M-F (x4) D8 Washer M-G (x8) Spacer NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED WARNING: CHOKING HAZARD SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED. 2 TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury. Phillips Screwdriver ASSEMBLY STEPS 44lbs (20kg) TV 11lbs (5kg) SHELF STEP 1 Attach base (A) to feet (B) using x4 M6x60mm carriage bolts (L), x4 D6 washers (M), and x4 M6 lock nuts (N). Tighten using the provided wrench (T). STEP 2 Remove the two bolts, four washers, and two nuts from the center pole (C) using the 4mm Allen wrench (R) and the wrench (T). Separate the two halves. 3 STEP 3 Slide the plastic cover (G) over the pole (C). Slide the top half of the pole back into the bottom half and secure using the hardware you removed in step 2. G STEP 4 Attach the center pole (C) to the base (A) using x1 M6x65 carriage bolt (L) through the front of the base, D6 washer (M) and M6 lock nut (N). Use the x4 M6x12mm bolts (P) to secure the top. Tighten using the 4mm Allen wrench (R) and wrench (T). 4 STEP 5 OPTION A: VESA Plate Only Use (M-A or M-B) bolts along with (M-E) washers to attach the VESA plate (D) without the adapters to the TV monitor. Make sure the "VIVO" logo on the front is right side up. M-A/M- B TV TV TV M- E OPTION B: VESA Plate with Adapters For TVs with VESA mounts at 200mm x 200mm or 200mm x 100mm, VESA adapters (E, F) are required. Attach adapters to VESA plate (D) using x8 M5x10mm bolts (J) and x8 M5 lock nuts (K). Tighten using the wrench (T) and a Phillips screwdriver. 5 STEP 5 (Continued) OPTION B: VESA Plate with Adapters (Continued) Use bolts (M-A-M-D) along with washers (M-E, M-F) to secure VESA plate with the adapters to the back of your television. Make sure the "VIVO" logo on the front is right side up. For a curved television, spacer (M-G) may be required. TV TV TV TV STEP 6 To attach the TV to the stand, loosen the nut at the top of the VESA plate and slide into the slot on the top of the mounting plate on the pole. Secure the top and bottom of the VESA plate to the stand by tightening both nuts using the wrench (T). 6 STEP 7 Remove clear protective film from both the shelf clamp plate (H) and mounting bracket (I). Partially insert M6x60 socket head bolts (Q) into the shelf using the 5mm Allen wrench (S) as shown. NOTE: Do not fully tighten screws at this time. STEP 8 Hold the shelf (H) to the pole (C). Place the mounting bracket (I) over the screw heads, then tighten with the 5mm Allen wrench (S). Adjust as desired. 7 Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us LAST UPDATED: 07/09/2021 REV1 Open Monday - Friday 7:00am - 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product. 309-278-5303 AVG. RESOLUTION TIME (within office hrs): 5M 4S www.vivo-us.com Chat live with an agent! AVG. RESOLUTION TIME (within office hrs): < 15 M [email protected] AVG. RESPONSE TIME (within office hrs): 1HR 8M - 23% within < 15m - 38% within < 30m - 61% within < 1hr - 83% within < 2hr - 92% within < 3hr FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.comAdobe PDF Library 15.0 Adobe InDesign 16.2 (Macintosh)