RF EXPOSURE EVALUATION

zhaowen

18 H61C5 RFExp

Shenzhen Qianyan Technology LTD H61C3 Govee RGBIC LED Neon Rope Light for desks 2A7VD-H61C3 2A7VDH61C3 h61c3

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 2 Pages, 140.11KB

Document DEVICE REPORTGetApplicationAttachment.html?id=6683660
RF EXPOSURE EVALUATION

According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency(RF) Radiation as specified in §1.1307(b)

FCC ID: 2A7VD-H61C3

EUT Specification

EUT Frequency band (Operating)
Device category Exposure classification Antenna diversity
Max. output power Antenna gain (Max) Evaluation applied

Govee RGBIC LED Neon Rope Light for desks WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.24GHz WLAN: 5.745GHz ~ 5.825GHz Others: BLE: 2.402GHz~2.480GHz Portable (<20cm separation) Mobile (>20cm separation) Others ___ Occupational/Controlled exposure General Population/Uncontrolled exposure Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity
BLE: 6.01dBm (0.0040W) WIFI 2.4G: 18.46dBm (0.0701W) BLE: 4.51 dBi WiFi 2.4G: 3.85 dBi
MPE Evaluation SAR Evaluation

Limits for Maximum Permissible Exposure(MPE)

Frequency Electric Field Magnetic Field

Power

Range(MHz) Strength(V/m) Strength(A/m) Density(mW/cm2)

(A) Limits for Occupational/Control Exposures

300-1500

--

--

F/300

1500-100000

--

--

5

(B) Limits for General Population/Uncontrol Exposures

300-1500

--

--

F/1500

1500-100000

--

--

1

Average Time
6 6
30 30

Friis transmission formula: Pd=(Pout*G)\(4*pi*R2)

Where Pd= Power density in mW/cm2 Pout=output power to antenna in Mw G= gain of antenna in linear scale Pi=3.1416 R= distance between observation point and center of the radiator in cm Pd the limit of MPE. If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached.
Max Measurement Result

Operating Mode

Measured Power (dBm)

BLE

6.01

WiFi 2.4G 18.46

Tune up tolerance
(dBm) 6.01 ±1 18.46 ±1

Max. Tune Antenna Power density up Power Gain at 20cm

(dBm) (dBi) (mW/cm2 )

7.01

4.51

0.0028

19.46

3.85

0.0427

Power density Limits
(mW/cm2 )
1 1

The WLAN 2.4G and BLE can transmit simultaneously:

=SWIFI2.4/Slimit-2.4+ SBLE/Slimit-BLE =0.0028/1+0.0427/1 =0.0455 < 1.0



Related FCC IDs:

Search Any Device: