User Guide
Smart Wi-Fi Light Bulb, Dimmable - User Guide
10 июн. 2020 г. —
PDF User Guide - TP-Link
tp link tapo bulb home assistant Just open the Tapo app and instantly turn connected devices on or off. Tapo L510B, Tapo L510E, Tapo L510E(2-pack), Tapo L530B, Tapo L530E.
User Guide for tp-link models including: Tapo L510 Series, Smart Wi-Fi Light Bulb
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 15 Pages, 2.21MB
Document DEVICE REPORTTapo L510B&Tapo L510E UG V1User Guide Smart Wi-Fi Light Bulb, Dimmable Tapo L510 Series 1910012758 REV1.0.0 Contents Conventions ······························································ 1 More Info······································································ 1 Introduction ······························································· 2 Set Up Your Bulb······················································ 3 Basic Device Control ············································ 4 Configure Your Smart Bulb································ 5 Set Schedule······················································ 5 Set Away Mode ················································· 6 Set Timer ······························································ 6 Control Your Device via Voice··················· 6 Device Sharing ·················································· 7 Authentication·························································· 8 Conventions The bulb, smart bulb or device mentioned in this User Guide stands for Tapo L510 series smart Wi-Fi light bulb without any explanations. Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand. More Info · The Quick Installation Guide can be found where you find this guide or inside the package of the extender. · Specifications can be found on the product page at https://www.tapo.com/. · Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/. 1 Introduction Tapo L510 series smart Wi-Fi light bulb lets you easily control your lights via the Tapo app, no matter where you find yourself. · Remote Control: Instantly turn the light on/off wherever you are through the Tapo app · Timer: Set a countdown timer to automatically turn the light on or off after a certain amount of time. · Schedule: Use Schedules to set your light to automatically turn on and off. · Away Mode: Set a period of time during which the light will be randomly turned on and off to make it look like you're home. · No Hub Required: Connect to your existing Wi-Fi router. · Device Sharing: Invite your family members to manage the bulb together. · Voice Control: Use Amazon Alexa or Google Assistant to control your bulb with voice commands. · Sunrise and Sunset Mode: Automatically activate your bulb according to your time zone. · Energy Saving: Reduce energy use up to 85% without losing brightness or quality. Image may differ from actual product due to different regional specifications. We use the US version as an example. 2 Set Up Your Bulb Follow the steps below to set up your samrt bulb via the Tapo app. 1. Download and install Tapo app Go to Google Play or the Apple App Store or scan the QR code below to download the Tapo app. 2. Log in to Tapo App Open the app and use your TP-Link ID to log in. If you don't have a TP-Link ID, tap REGISTER and the app will guide you through the rest. 3. Add your device Tap the + button in the Tapo app, select Smart Bulb and then follow step-by-step app instructions to complete the setup. OR 3 Basic Device Control After successfully setting up your smart bulb, you will see the home page of the Tapo app. Here you can view the status of all devices that you've added and manage them. You can tap on the device to control and manage. Home Page You can toggle on or off the bulb any time anywhere and tap the device to enter the status page. Device Status Page You can set a schedule, enable away mode, or set a timer to automatically control your device, and view its runtime. Device Settings Tap to view the Device Settings page. You can change the device icon, name and location, brightness preset and default state, you can also invite your family members to manage the device together. 4 Configure Your Smart Bulb Schedule and Timer features allow you to create weekly schedule and countdown plans. Your bulb will automatically work at your preset time, making your life convenient and energy-saving. Away Mode intelligently simulates someone being home by turning the light on and off, making it appear that someone is home when you're on long trips to keep away people with ill intent. Control your light via voice and invite your family members to manage your bulb together. Set Schedule Tap to add a schedule for your smart bulb to automatically turn on or off and adjust the brightness to simplify your daily routine. Set brightness Tap + to add more schedules and you can also pause the schedule manually anytime. 5 Set Away Mode Tap to preset the Away Mode, set the beginning time and the end time, then your smart bulb will be randomly turned on and off during this period. Set Timer Tap to set the timer, set a countdown timer and the brightness, your smart bulb will automatically turn on with the specific brightness after the timer ends. Control Your Device via Voice Tap the hamburger button and select Voice Control, then you can choose a voice assistant and follow the instructions to control your device via voice. 6 Device Sharing You can invite your family members to manage your device together. On the home page, long press the device, you can select to remove, favorite or share it. Enter the TP-Link ID you want to share the device with, then tap SHARE. You can also tap the hamburger button and select Device Sharing to view your shared devices and devices shared from others. 7 Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd. All rights reserved. http://www.tp-link.com 8 FCC Compliance Information Statement Product Name: Smart Wi-Fi Light Bulb, Dimmable Model Number: Tapo L510E Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: [email protected] This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 9 Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. "To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter." We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2020.3.2 CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU, and (EU)2015/863. The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The device complies with RF specifications when the device used at 20 cm from your body. Restricted to indoor use. 10 , . Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1 ) This device may not cause interference, and 2 ) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : 1 ) l'appareil ne doit pas produire de brouillage; 2 ) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Industry Canada Statement CAN ICES-3 (B)/NMB-3(B) 11 NCC Notice · · · · Pb Cd Hg Cr+6 PCB -- 1. " 0.1 wt %" " 0.01 wt %" 2. " " 3. " -- " PBB Safety Information · Keep the device away from water, fire, humidity or hot environments. · Do not attempt to disassemble, repair, or modify the device. PBDE 12 · Do not use the device where wireless devices are not allowed. · Only use the control provided with or specified by these instructions to control this device. WARNING: · RISK OF ELECTRIC SHOCK OR BURNS. Switch OFF the light switch controlling the bulb and WAIT for the bulb to cool down before attempting to change it. · Do not install the Smart Bulb with wet hands or when standing on wet or damp surfaces. · Compatible with regular light switches. Not suitable for use with standard in-wall dimmers. Not compatible with photosensors, motion sensors, or timers. Dimmable via the app only. · NOT for use in totally enclosed or recessed luminaires. Suitable for damp locations. · NOT FOR EMERGENCY LIGHTING. · The increased weight may reduce the mechanical stability of certain luminaires and lampholders and may impair contact making and lamp retention. · Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. · Operating Temperature: 0~40(32~104) · Storage Temperature: -20~70(-4-158) · Operating Humidity: 10%~90%RH, Non-condensing · Storage Humidity: 10%~90%RH, Non-condensing Explanation of the symbols on the product label Symbol Explanation Indoor use only AC voltage RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment. 13Adobe PDF Library 15.0 Adobe InDesign CC 2015 (Windows)