Specialife Industries LTD IQ2PWRRSL iQsquare Powermeter User Guide

User Manual PWR V1.0

User manual

Specialife Industries LTD. IQ2PWRRSL iQsquare powermeter, iQsquare pedal 2AB6TIQ2PWRRSL 2AB6TIQ2PWRRSL iq2pwrrsl

Specialife Industries LTD. IQ2PWRRSL2 iQsquare powermeter, iQsquare pedal 2AB6TIQ2PWRRSL2 2AB6TIQ2PWRRSL2 iq2pwrrsl2

User Guide for Specialife Industries LTD models including: IQ2PWRRSL, 2AB6TIQ2PWRRSL, 2AB6TIQ2PWRRSL, IQ2PWRRSL iQsquare Powermeter, IQ2PWRRSL, iQsquare Powermeter, Powermeter

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:

File Info : application/pdf, 8 Pages, 388.56KB

Document DEVICE REPORTGetApplicationAttachment.html?id=6768661

USER GUIDE

WARNING: Read this manual in it's entirety before using this product. Improper use could result in damage to the product or lead to injury.
TABLE OF CONTENTS
CHAPTER 1 Pedal specifications CHAPTER 2 Installation and Removal -Tension Adjustment CHAPTER 3 Pairing CHAPTER 4 Calibration and manual zero - Temperature Compensation CHAPTER 5 Battery replacement CHAPTER 6 Firmware CHAPTER 7 Precautions CHAPTER 8 Warranty

PACKAGE CONTENTS Right pedal Left pedal Pedal washers (pair) Batteries (CR-2032) Alignment Tool

Alignment Tool

TOOLS REQUIRED 5mm HEX 6mm HEX Provided alignment tool

1/8

V1.0 March 2023

CHAPTER 1: PEDAL SPECIFICATIONS
MEASUREMENT

Power Range

0-2600W

Power Accuracy

+ and - 1%

Cadence Range

10-200 rpm

Sensor

Full bridge thin film strain gauge

Sample Frequency

Up to 2000 samples per seconds

Temperature Compensation Full continuous temperature compensation

FEATURES

Wireless Communication ANT+ and Bluetooth Smart

Transmits

Total Power

When using iQsquare left and right power meter

L R Power Balance

Pedal Smoothness

Torque Effectiveness

Transmits Cadence

Yes

BATTERY
Battery Type Replaceable Battery Life Auto Sleep Low Battery Warning

3V CR2032 lithium coin cell By User Up to 140 hours On/Off ANT+ message

CONFIGURATION

Configuration App Firmware Updatable User Configuration

iQsquare configuration app for IOS and Android Through iQsquare configuration app Crank length Power compensation to align with indoor trainer

DIMENSIONS

Dimensions Q-Factor Weight Pedal Threading

95 x 105 x 35 mm 55 mm 210 gram per side including battery 9/16"-20 tpi

ENVIRONMENT
Temperature Range Water Proof Rating Max Rider Weight

-10 ~ 50 degrees Celsius Manufactured to the IP54 standard 120 kg

MISC

Warranty 2 years

2/8

V1.0 March 2023

CHAPTER 2: INSTALLATION AND REMOVAL
PEDAL INSTALLATION Please scan the QR code in the packaging to find the detailed installation instruction video. You will need a 6mm hex key, the provided Alignment tool. We strongly advice to use a torque wrench when tightening during installation.
IMPORTANT: Make sure cleats engage and disengage properly before riding.
CLEAT INSTALLATION
Note: iQsquare pedals are compatible with Look Keo. But could be that they are NOT compatible with other similar looking cleats. For installation off the cleats please refer to you shoes manual.
TENSION ADJUSTMENT
If you like to adjust the release tention this is easy to do. Turn the screw on top off the pedal back.( see image ) Turn clockwise increase te tention. Turn anti clockwise to release the tention. Do not try to turn the screw past the end stop, this may result in damage.

Note: Cleats need to be replaced periodically based on individual rider use. If cleats are showing signs of wear or are not engaging and disengaging from the pedal as
normal do not adjust the tention but replace the cleats.

3/8

V1.0 March 2023

CHAPTER 3: PAIRING
PEDAL PARING
If the pedal is 1 minute without movement it goes to sleep to conserve battery life. After a couple off rotations off the crank your iQsquare pedal wakes up.
PAIRING
After installing the pedals to you crank arms open the iQsquare app, spin the crank arm to wake up the pedals. And follow the steps in the app. Your iQsquare Power meter should now be correctly installed.
To pair:
1. Awake both pedals by spinning the crank arms. 2. Go to the SENSORS screen on your cycling computer or watch and follow the pairing instructions of you device. 3. The pedal broadcasts data using Bluetooth Smart and ANT+ simultaneously. You can pair your pedal to any device using either of these wireless protocols.
Bluetooth Smart
Bluetooth Smart is the low energy version of Bluetooth wireless technology. Learn more about this technology visit www.bluetooth.com
ANT+
ANT+ is a low energy form of wireless technology used in many sport electronics. To learn more about ANT+ visit www.thisisant.com

4/8

V1.0 March 2023

CHAPTER 4: CALIBRATION AND MANUAL ZERO
CALIBRATION The iQsquare power meter is fully factory calibrated. So no need to do this after receiving your pedal set.
Manual zero ( zero offset) After your first installation it's important to calibrate it the correct way. Place you cranks in the 12 - 6 o'clock position.
iQsquare app: open the app connect with your iQsquare Power meter and tick the Zero offset button. Cycling computer: follow the manufacturers instruction to do a zero offset.
If you like you can do this proces every ride, but it's not mandatory. We advice to do a zero offset after re-installing the pedals, ofter your first ride and after you drop your bike. In normal use it's only needed to do the zero offset every 3 month.
Temperature Compensation The iQsquare Power meter has full auto Temperature Compensation. Temperature effects on the power reading is with in the 1% accuracy.

Note: When preforming a Zere offset please place bike in up-right position with crank arms in 12 - 6 o'clock rotation. Hold the bike stil and make shore the pedals are not moved or touched during the proces. Also unclip your shoes of the pedals. Is something when wrong just re do the zero offset.

5/8

V1.0 March 2023

CHAPTER 5: BATTERY REPLACEMENT
BATTERY REPLACEMENT
To place the provide CR-2023 remove the battery cover with a 5mm hex key.

Note: only use the straight edge of a 5mm Hex key to loosen the cover.
Place the + side off the CR-2032 on battery cap ( magnetic ) Make shore the battery is centered and install it by replacing the battery cover and tighten it with the straight
side of your 5mm hex key but do not overtighten. This can result in damage that could not be covered by the
warranty.
We advice to replace your battery in clean/dry conditions. Damage caused by batteries, wrong placement is not covered under the warranty of the pedals. Remove batteries from the pedal system if they will be unused for longer than a month. Use only lithium batteries with the pedal system. Alkaline batteries could damage the pedals. IMPORTANT: Ensure the o-ring clears the outer edge of the battery compartment during installation.

6/8

V1.0 March 2023

CHAPTER 6: FIRMWARE
FIRMWARE UPDATES
Firmware update can be done OTA. Open the iQsquare app and connect to the pedals. If there is a update available it wil show on the configuration page. Here you can click the update button and follow the proces. During the proces keep your phone near the power meter. Do not disconnect as this can result in not working Power meter. Over-the-Air firmware updates can only be done with the official iQsquare app from the App Store.
The over the air (OTA) firmware update is done true BLE.
Bluetooth must be turned "on" on your device.
CHAPTER 7: PRECAUTIONS
PRECAUTIONS
Do not submerging pedals in water. Do not spray direct high pressure water spray. Damaging chemicals like diesel, kerosene and other strong solvents are also potentially damaging. It could be that this voids your warranty. Some of the electronics inside the pedal are sensitive to strong magnets and if your pedals come in close contact with strong magnets they may begin transmitting abnormal data. If you think your pedals were exposed to the magnetic field of a strong magnet please remove battery and leave for one or two day's. They should be working fine after this. If not please contact our support team. WARNING: Keep pedals away from strong magnets.
LONG TERM STORAGE
If the pedals will not be used for an extended period of time (2 months or more) remove the batteries to prevent excessive battery drain and potential battery vomiting.
CHAPTER 8: WARRANTY
OFFICIAL WARRANTY TERMS
New iQsquare pedals come with 2y warranty. The warranty is only vallid for the original buyer. If pedals are sold the warranty is not transferable and will stop. Replacement pedals new or refurbish pedals wil have the same warranty dates as the original bought pedals.

7/8

V1.0 March 2023

CHAPTER 9: WARRANTY CONTINUED
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.

8/8

V1.0 March 2023

References

Related FCC IDs:

2AB6TIQ2PWRRSL - Specialife Industries LTD. iQsquare powermeter, iQsquare pedal [IQ2PWRRSL]
2AB6TIQ2PWRRSL2 - Specialife Industries LTD. iQsquare powermeter, iQsquare pedal [IQ2PWRRSL2]

Pages macOS Versie 13.2.1 (build 22D68) Quartz PDFContext