Standard Vorlage
Brandhorst, Dirk Phoenix Contact GmbH & Co. KG
DTS UNII Declaration
Realme Chongqing Mobile Telecommunications Corp., Ltd. RMX3988 Mobile Phone 2AUYFRMX3988 2AUYFRMX3988 rmx3988
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 1 Pages, 82.03KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7461588UNII Declaration Letter We have declared below featured for FCC equipment authorization, device FCC ID: 2AUYFRMX3988, (1) DFS Device -- Master, Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning , adhoc mode access point capability Frequency Band (MHz) 2412 2462 MHz 5150 5250 MHz 5250 5350 MHz 5470 5725 MHz 5725 5850 MHz Active Scanning (the device can transmit a probe (beacon)) Yes, No Yes, No Yes, No Yes, No Yes, No passive scanning (where the device is can listen only with no probes) Yes, No Yes, No Yes, No Yes, No Yes, No Ad Hoc Mode capability Yes, No Yes, No Yes, No Yes, No Yes, No Access point capability Yes, No Yes, No Yes, No Yes, No Yes, No (3) Country code selection ability - Yes , No If no, pls explain how was implemented : use Microsoft network utility (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on how it was implement (By hardware or software , and how software was controlled) The active or passive mode was controlled by software. For non-DFS frequency used active scanning, for DFS frequency was switched to passive scanning by software Mechanism If you have any questions, please feel free to contact me at the address shown below. Yours sincerely, Signatory Contact Person: Mega Huang E-mail: [email protected]
Related FCC IDs:
- 2AUYFRMX3988 - Realme Chongqing Mobile Telecommunications Corp., Ltd. Mobile Phone [RMX3988] Brandhorst, Dirk Adobe PDF Library 20.6.66