Test Report LTE band 66
Shenzhen kehuitong Technology Co.,Ltd U100 2BE8S-U100 2BE8SU100 u100
Not Your Device? Search For Manuals or Datasheets below:
File Info : application/pdf, 23 Pages, 900.02KB
Document DEVICE REPORTGetApplicationAttachment.html?id=7390831Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao'an District, Shenzhen, China TEST REPORT FCC Part 27 Report Reference No......................: CTA24052101817 FCC ID..............................................: 2BE8S-U100 Compiled by ( position+printed name+signature) .: File administrators Kevin Liu Supervised by ( position+printed name+signature) .: Project Engineer Kevin Liu Approved by ( position+printed name+signature) .: RF Manager Eric Wang Date of issue.....................................: May 29, 2024 Testing Laboratory Name ..............: Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Address ............................................: Fuhai Street, Bao`an District, Shenzhen, China Applicant's name ............................: Shenzhen kehuitong Technology Co., Ltd. Address ............................................: F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Test specification ...........................: FCC CFR Title 47 Part 2, Part 27 Standard ...........................................: ANSI/TIA-603-E-2016 KDB 971168 D01 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description......................: mobile phone Trade Mark .......................................: Aidekunlin Manufacturer ...................................: Shenzhen kehuitong Technology Co., Ltd. Model/Type reference.......................: U100 U24, U25, U26, U27, U28, U29, U30, U31, U32, U33, U34, U35, Listed Models ..................................: U70, U70U, U80, U80U, U90, U90U, U60, U12pro, U13pro, U14pro, U27pro, U200, U300, U400, U500, U600, U700 Ratings .............................................: DC 3.8V From battery and DC 5.0V From external circuit Modulation .......................................: QPSK, 16QAM Frequency.......................................... E-UTRA Band 66 Result................................................: PASS Report No.: CTA24052101817 TEST REPORT Page 2 of 23 Equipment under Test : mobile phone Model /Type Listed Models Applicant : U100 : U24, U25, U26, U27, U28, U29, U30, U31, U32, U33, U34, U35, U70, U70U, U80, U80U, U90, U90U, U60, U12pro, U13pro, U14pro, U27pro, U200, U300, U400, U500, U600, U700 : Shenzhen kehuitong Technology Co., Ltd. Address : F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Manufacturer : Shenzhen kehuitong Technology Co., Ltd. Address : F3.830306G, 3rd Floor, Tianan Code City Tianjing Building, No.6 Tianan Road, Shatou Street, Futian District, Shenzhen, China Test result Pass * * In the configuration tested, the EUT complied with the standards specified page 4. The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24052101817 Page 3 of 23 Contents 1 SUMMARY ............................................................................................................................................................4 1.1 TEST STANDARDS .................................................................................................................................................4 1.2 TEST DESCRIPTION ....................................................................................................................................................4 1.3 ADDRESS OF THE TEST LABORATORY ..............................................................................................................................4 1.4 TEST FACILITY...........................................................................................................................................................4 1.5 STATEMENT OF THE MEASUREMENT UNCERTAINTY ...........................................................................................................5 2 GENERAL INFORMATION.......................................................................................................................................6 2.1 ENVIRONMENTAL CONDITIONS.....................................................................................................................................6 2.2 GENERAL DESCRIPTION OF EUT...................................................................................................................................6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY ......................................................................................................6 2.4 EQUIPMENTS USED DURING THE TEST...........................................................................................................................7 2.5 RELATED SUBMITTAL(S) / GRANT (S).............................................................................................................................7 2.6 MODIFICATIONS .......................................................................................................................................................7 3 TEST CONDITIONS AND RESULTS ...........................................................................................................................8 3.1 OUTPUT POWER.......................................................................................................................................................8 3.2 PEAK-TO-AVERAGE RATIO (PAR) ...............................................................................................................................14 3.3 OCCUPIED BANDWIDTH AND EMISSION BANDWIDTH .....................................................................................................15 3.4 BAND EDGE COMPLIANCE.........................................................................................................................................16 3.5 SPURIOUS EMISSION ...............................................................................................................................................17 3.6 FREQUENCY STABILITY UNDER TEMPERATURE & VOLTAGE VARIATIONS ..............................................................................21 4 TEST SETUP PHOTOS OF THE EUT ........................................................................................................................ 23 5 PHOTOS OF THE EUT ........................................................................................................................................... 23 Report No.: CTA24052101817 Page 4 of 23 1 SUMMARY 1.1 TEST STANDARDS The tests were performed according to following standards: FCC Part 2: FREQUENCY ALLOCA-TIONS AND RADIO TREATY MAT-TERS; GENERAL RULES AND REG-ULATIONS FCC Part 27 : MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES ANSI/TIA-603-E-2016: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. ANSI C63.26-2015: IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services FCCKDB971168D01 Power Meas License Digital Systems 1.2 Test Description Test Item RF Output Power Peak-to-Average Ratio 99% & -26 dB Occupied Bandwidth Spurious Emissions at Antenna Terminal Field Strength of Spurious Radiation Out of band emission, Band Edge Frequency stability Section in CFR 47 Part 2.1046 Part 27.50(d)(4) Part 27.50(d)(5) Part 2.1049 Part 27.53(h) Part 2.1051 Part 27.53(h) Part 2.1053 Part 27.53(h) Part 2.1051 Part 27.53(h) Part 2.1055 Part 27.54 Result Pass Pass Pass Pass Pass Pass Pass 1.3 Address of the test laboratory Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community,Fuhai Street, Bao'an District, Shenzhen, China The 3m-Semi anechoic test site fulfils CISPR 16-1-4 according to ANSI C63.4:2014 and CISPR 16-1-4:2010 SVSWR requirement for radiated emission above 1GHz. 1.4 Test Facility The test facility is recognized, certified, or accredited by the following organizations: FCC-Registration No.: 165725 Shenzhen Global Test Service Co.,Ltd EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. A2LA-Lab Cert. No.: 4758.01 Shenzhen CTA Testing Technology Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to be in compliance with ISO/IEC 17025: 2005 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. Report No.: CTA24052101817 Page 5 of 23 CNAS-Lab Code: L8169 Shenzhen CTA Testing Technology Co., Ltd. has been assessed and proved to be in compliance with CNASCL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC 17025: 2005 General Requirements) for the Competence of Testing and Calibration Laboratories. Date of Registration: Dec. 11, 2015. Valid time is until Dec. 10, 2024. 1.5 Statement of the measurement uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. to TR-100028-01"Electromagnetic compatibilityand Radio spectrum Matters (ERM);Uncertainties in the measurementof mobile radio equipment characteristics;Part 1"and TR-100028-02 "Electromagnetic compatibilityand Radio spectrum Matters (ERM);Uncertainties in the measurementof mobile radio equipment characteristics;Part 2 " and is documented in the Shenzhen CTA Testing Technology Co., Ltd. quality system acc. to DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the device. Hereafter the best measurement capability for Shenzhen CTA Testing Technology Co., Ltd. is reported: Test Range Measurement Uncertainty Notes Radiated Emission 30~1000MHz 4.10 dB (1) Radiated Emission 1~18GHz 4.32 dB (1) Radiated Emission 18-40GHz 5.54 dB (1) Conducted Disturbance 0.15~30MHz 3.12 dB (1) Conducted Power 9KHz~18GHz 0.61 dB (1) Spurious RF Conducted Emission 9KHz~40GHz 1.22 dB (1) Band Edge Compliance of RF Emission 9KHz~40GHz 1.22 dB (1) Occupied Bandwidth 9KHz~40GHz - (1) (1) This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=1.96. Report No.: CTA24052101817 Page 6 of 23 2 GENERAL INFORMATION 2.1 Environmental conditions Date of receipt of test sample : May 20, 2024 Testing commenced on : May 20, 2024 Testing concluded on : May 29, 2024 During the measurement the environmental conditions were within the listed ranges: Normal Temperature: 25°C Relative Humidity: 55 % Air Pressure: 101 kPa 2.2 General Description of EUT Product Name: Model/Type reference: Power supply: Adapter information (Auxiliary test supplied by test Lab): Hardware version: Software version: Testing sample ID LTE Operation Band: mobile phone U100 DC 3.8V From battery and DC 5.0V From external circuit Model: EP-TA20CBC Input: AC 100-240V 50/60Hz Output: DC 5V 2A V707IK_MB_V6.0_202311 22 V707IK_HDPLUS1600_Q0_V6.0_3_32_20240412_0857_V1.0.3_ HUAX_L300D14_WO_X100 CTA240521018-1# (Engineer sample) CTA240521018-2# (Normal sample) E-UTRA Band 66 Support Bandwidth: Band 66: 1.4MHz, 3MHz, 5MHz, 10MHz, 15MHz, 20MHz TX/RXFrequency Range: E-UTRA Band 66(1710 MHz -1780MHz) Modulation Type: QPSK, 16QAM Release Version: Release 9 Category: Cat 4 Antenna Type: PIFA Antenna Antenna Gain: Band 66: 0.80dBi Note: For more details, refer to the user's manual of the EUT. 2.3 Description of Test Modes and Test Frequency The EUT has been tested under typical operating condition. The CMW500 used to control the EUT staying in continuous transmitting and receiving mode for testing. Regards to the frequency band operation: the lowestmiddle and highest frequency of channel were selected to perform the test, then shown on this report. Report No.: CTA24052101817 Page 7 of 23 2.4 Equipments Used during the Test Test Equipment Manufacturer Model No. LISN R&S ENV216 LISN R&S ENV216 EMI Test Receiver R&S ESPI EMI Test Receiver R&S ESCI Spectrum Analyzer Agilent N9020A Spectrum Analyzer R&S Vector Signal generator Analog Signal Generator WIDEBAND RADIO COMMUNICATIO N TESTER Temperature and humidity meter Ultra-Broadband Antenna Horn Antenna Loop Antenna Horn Antenna Agilent R&S CMW500 Chigo Schwarzbeck Schwarzbeck Zhinan Beijing Hangwei Dayang Amplifier Schwarzbeck FSP N5182A SML03 R&S ZG-7020 VULB9163 BBHA 9120D ZN30900C OBH100400 BBV 9745 Amplifier Taiwan chengyi EMC051845B Directional coupler NARDA 4226-10 High-Pass Filter XingBo XBLBQ-GTA18 High-Pass Filter Automated filter bank Power Sensor XingBo Tonscend Agilent XBLBQ-GTA27 JS0806-F U2021XA Amplifier Schwarzbeck BBV9719 Equipment No. CTA-308 CTA-314 CTA-307 CTA-306 CTA-301 CTA-337 CTA-305 CTA-304 CTA-302 CTA-326 CTA-310 CTA-309 CTA-311 CTA-336 CTA-312 CTA-313 CTA-303 CTA-402 CTA-403 CTA-404 CTA-405 CTA-406 Calibration Date 2023/08/02 Calibration Due Date 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/10/17 2023/10/13 2023/10/17 2024/10/16 2024/10/12 2024/10/16 2021/08/07 2024/08/06 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2023/08/02 2024/08/01 2.5 Related Submittal(s) / Grant (s) This submittal(s) (test report) is intended for filing to comply with of the FCC Part 27 Rules. 2.6 Modifications No modifications were implemented to meet testing criteria. Report No.: CTA24052101817 Page 8 of 23 3 TEST CONDITIONS AND RESULTS 3.1 Output Power LIMIT According to §27.50 (d) (4): Fixed, mobile, and portable (hand-held) stations operating in the 17101755 MHz band and mobile and portable stations operating in the 1695-1710 MHz and 1755-1780 MHz bands are limited to 1 watt EIRP. TEST CONFIGURATION Conducted Power Measurement Radiated Power Measurement: TEST PROCEDURE The EUT was setup according to EIA/TIA 603D Conducted Power Measurement: a) Place the EUT on a bench and set it in transmitting mode. b) Connect a low loss RF cable from the antenna port to a spectrum analyzer and CMW500 by a Directional Couple. c) EUT Communicate with CMW500 then selects a channel for testing. d) Add a correction factor to the display of spectrum, and then test. Radiated Power Measurement: a) The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider. b) The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to the frequency of the transmitter c) The output of the test antenna shall be connected to the measuring receiver. d) The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency of the transmitter under test. Report No.: CTA24052101817 Page 9 of 23 e) The test antenna shall be raised and lowered through the specified range of height until a maximum signal level is detected by the measuring receiver. f) The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum signal level is detected by the measuring receiver. g) The test antenna shall be raised and lowered again through the specified range of height until a maximum signal level is detected by the measuring receiver. h) The maximum signal level detected by the measuring receiver shall be noted. i) The transmitter shall be replaced by a substitution antenna. j) The substitution antenna shall be orientated for vertical polarization and the length of the substitution antenna shall be adjusted to correspond to the frequency of the transmitter. k) The substitution antenna shall be connected to a calibrated signal generator. l) If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver. m) The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received. n) The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o) The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p) The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q) Test site anechoic chamber refer to ANSI C63.4. Report No.: CTA24052101817 TEST RESULTS Conducted Measurement: BW (MHz) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 BW (MHz) 15 15 15 15 15 15 15 15 15 15 15 15 15 15 Modulation RB Size QPSK 1 QPSK 1 QPSK 1 QPSK 50 QPSK 50 QPSK 50 QPSK 100 16QAM 1 16QAM 1 16QAM 1 16QAM 50 16QAM 50 16QAM 50 16QAM 100 Modulation RB Size QPSK 1 QPSK 1 QPSK 1 QPSK 36 QPSK 36 QPSK 36 QPSK 75 16QAM 1 16QAM 1 16QAM 1 16QAM 36 16QAM 36 16QAM 36 16QAM 75 Page 10 of 23 LTE Band 66 RB Offset 0 49 99 0 24 50 0 0 49 99 0 24 50 0 Channel/Frequency(MHz) 132072 1720 23.21 23.72 23.49 22.05 22.25 22.32 22.43 22.29 22.31 22.35 21.29 21.31 21.39 21.49 132322 1745 23.77 23.04 23.01 22.11 22.13 22.08 22.39 22.07 22.27 22.36 21.52 21.39 21.33 21.22 132572 1770 23.77 23.03 23.42 22.25 22.35 22.18 22.45 22.18 22.33 22.25 21.16 21.27 21.38 21.17 RB Offset 0 37 74 0 20 39 0 0 37 74 0 20 39 0 Channel/Frequency(MHz) 132047 1717.5 23.82 23.06 23.72 22.16 22.31 22.37 22.45 22.16 22.23 22.15 21.38 21.33 21.28 21.28 132322 1745 23.24 23.24 23.74 22.04 22.28 22.26 22.13 22.36 22.05 22.14 21.19 21.51 21.55 21.43 132597 1772.5 23.79 23.44 23.72 22.27 22.43 22.07 22.44 22.39 22.15 22.22 21.45 21.42 21.49 21.46 Tune-up limit (dBm) 24.00 23.00 23.00 23.00 22.00 22.00 Tune-up limit (dBm) 24.00 23.00 23.00 23.00 22.00 22.00 BW (MHz) 10 10 10 10 10 10 10 10 10 10 10 10 10 10 BW (MHz) 5 5 5 5 Modulation RB Size RB Offset QPSK 1 0 QPSK 1 25 QPSK 1 49 QPSK 25 0 QPSK 25 12 QPSK 25 25 QPSK 50 0 16QAM 1 0 16QAM 1 25 16QAM 1 49 16QAM 25 0 16QAM 25 12 16QAM 25 25 16QAM 50 0 Modulation RB Size RB Offset QPSK 1 0 QPSK 1 12 QPSK 1 24 QPSK 12 0 Channel/Frequency(MHz) 132022 1715 23.49 23.04 23.74 22.40 22.17 22.40 22.33 22.44 22.19 22.31 21.16 21.51 21.51 21.41 132322 1745 23.58 23.18 23.13 22.21 22.33 22.26 22.37 22.13 22.10 22.11 21.48 21.39 21.36 21.41 132622 1775 23.94 23.27 23.13 22.41 22.40 22.10 22.05 22.25 22.28 22.05 21.46 21.28 21.52 21.27 Channel/Frequency(MHz) 131997 1712.5 23.08 23.58 23.41 22.37 132322 1745 23.48 23.50 23.13 22.36 132647 1777.5 23.15 23.12 23.30 22.12 Tune-up limit (dBm) 24.00 23.00 23.00 23.00 22.00 22.00 Tune-up limit (dBm) 24.00 23.00 Report No.: CTA24052101817 5 QPSK 12 7 5 QPSK 12 13 5 QPSK 25 0 5 16QAM 1 0 5 16QAM 1 12 5 16QAM 1 24 5 16QAM 12 0 5 16QAM 12 7 5 16QAM 12 13 5 16QAM 25 0 BW (MHz) 3 3 3 3 3 3 3 3 3 3 3 3 3 3 BW (MHz) 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 Modulation RB Size RB Offset QPSK 1 0 QPSK 1 8 QPSK 1 14 QPSK 8 0 QPSK 8 4 QPSK 8 7 QPSK 15 0 16QAM 1 0 16QAM 1 8 16QAM 1 14 16QAM 8 0 16QAM 8 4 16QAM 8 7 16QAM 15 0 Modulation RB Size RB Offset QPSK 1 0 QPSK 1 3 QPSK 1 5 QPSK 3 0 QPSK 3 1 QPSK 3 3 QPSK 6 0 16QAM 1 0 16QAM 1 3 16QAM 1 5 16QAM 3 0 16QAM 3 1 16QAM 3 3 16QAM 6 0 22.29 22.20 22.36 22.42 22.28 22.14 21.20 21.31 21.44 21.40 22.30 22.39 22.21 22.22 22.12 22.09 21.31 21.40 21.29 21.42 22.31 22.41 22.29 22.35 22.15 22.27 21.51 21.46 21.54 21.55 Page 11 of 23 23.00 23.00 22.00 22.00 Channel/Frequency(MHz) 131987 1711.5 23.63 23.73 23.81 22.20 22.22 22.44 22.06 22.43 22.21 22.23 21.42 21.33 21.27 21.41 132322 1745 23.89 23.97 23.29 22.23 22.17 22.42 22.32 22.39 22.17 22.37 21.34 21.34 21.45 21.52 132657 1778.5 23.06 23.27 23.10 22.15 22.09 22.24 22.13 22.36 22.37 22.37 21.23 21.36 21.22 21.51 Channel/Frequency(MHz) 131979 1710.7 23.93 23.75 23.36 22.37 22.25 22.33 22.17 22.43 22.06 22.28 21.53 21.16 21.21 21.47 132322 1745 23.50 23.93 23.63 22.40 22.22 22.01 22.39 22.14 22.27 22.24 21.26 21.32 21.47 21.44 132665 1779.3 23.50 23.21 23.54 22.33 22.27 22.37 22.26 22.13 22.04 22.02 21.28 21.45 21.53 21.27 Tune-up limit (dBm) 24.00 23.00 23.00 23.00 22.00 22.00 Tune-up limit (dBm) 24.00 23.00 23.00 23.00 22.00 22.00 Report No.: CTA24052101817 Page 12 of 23 Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 66; recorded worst case for each Channel Bandwidth of LTE FDD Band 66. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) Frequency (MHz) 1710.7 1745.0 1779.3 PMea (dBm) -19.16 -18.48 -19.21 LTE FDD Band 66_Channel Bandwidth 1.4MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.77 30.00 -7.23 2.85 9.47 35.7 23.84 30.00 -6.16 2.92 9.5 35.7 23.07 30.00 -6.93 Polarization V V V Frequency (MHz) 1711.5 1745.0 1778.5 PMea (dBm) -18.96 -19.74 -19.25 LTE FDD Band 66_Channel Bandwidth 3MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.97 30.00 -7.03 2.85 9.47 35.7 22.58 30.00 -7.42 2.92 9.5 35.7 23.03 30.00 -6.97 Polarization V V V Frequency (MHz) 1712.5 1745.0 1777.5 PMea (dBm) -19.76 -19.68 -19.94 LTE FDD Band 66_Channel Bandwidth 5MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.17 30.00 -7.83 2.85 9.47 35.7 22.64 30.00 -7.36 2.92 9.5 35.7 22.34 30.00 -7.66 Polarization V V V Frequency (MHz) 1715.0 1745.0 1775.0 PMea (dBm) -17.60 -17.27 -17.90 LTE FDD Band 66_Channel Bandwidth 10MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 24.33 30.00 -5.67 2.85 9.47 35.7 25.05 30.00 -4.95 2.92 9.5 35.7 24.38 30.00 -5.62 Polarization V V V Frequency (MHz) 1717.5 1745.0 1772.5 PMea (dBm) -19.23 -19.11 -19.26 LTE FDD Band 66_Channel Bandwidth 15MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.70 30.00 -7.30 2.85 9.47 35.7 23.21 30.00 -6.79 2.92 9.5 35.7 23.02 30.00 -6.98 Polarization V V V Frequency (MHz) 1720.0 1745.0 1770.0 PMea (dBm) -17.99 -18.51 -17.40 LTE FDD Band 66_Channel Bandwidth 20MHz_QPSK Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 23.94 30.00 -6.06 2.85 9.47 35.7 23.81 30.00 -6.19 2.92 9.5 35.7 24.88 30.00 -5.12 Polarization V V V Report No.: CTA24052101817 Page 13 of 23 Frequency (MHz) 1710.7 1745.0 1779.3 LTE FDD Band 66_Channel Bandwidth 1.4MHz_16QAM PMea (dBm) Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) -18.99 2.75 8.98 35.7 22.94 30.00 -7.06 -19.20 2.85 9.47 35.7 23.12 30.00 -6.88 -19.35 2.92 9.5 35.7 22.93 30.00 -7.07 Polarization V V V Frequency (MHz) 1711.5 1745.0 1778.5 PMea (dBm) -19.90 -19.61 -17.16 LTE FDD Band 66_Channel Bandwidth 3MHz_16QAM Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.03 30.00 -7.97 2.85 9.47 35.7 22.71 30.00 -7.29 2.92 9.5 35.7 25.12 30.00 -4.88 Polarization V V V Frequency (MHz) 1712.5 1745.0 1777.5 PMea (dBm) -19.83 -18.52 -18.19 LTE FDD Band 66_Channel Bandwidth 5MHz_16QAM Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.10 30.00 -7.90 2.85 9.47 35.7 23.80 30.00 -6.20 2.92 9.5 35.7 24.09 30.00 -5.91 Polarization V V V Frequency (MHz) 1715.0 1745.0 1775.0 PMea (dBm) -17.88 -18.01 -18.93 LTE FDD Band 66_Channel Bandwidth 10MHz_16QAM Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 24.05 30.00 -5.95 2.85 9.47 35.7 24.31 30.00 -5.69 2.92 9.5 35.7 23.35 30.00 -6.65 Polarization V V V Frequency (MHz) 1717.5 1745.0 1772.5 PMea (dBm) -19.60 -19.53 -18.45 LTE FDD Band 66_Channel Bandwidth 15MHz_16QAM Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 22.33 30.00 -7.67 2.85 9.47 35.7 22.79 30.00 -7.21 2.92 9.5 35.7 23.83 30.00 -6.17 Polarization V V V Frequency (MHz) 1720.0 1745.0 1770.0 PMea (dBm) -18.56 -18.65 -18.67 LTE FDD Band 66_Channel Bandwidth 20MHz_16QAM Pcl (dB) Ga Antenna Gain(dB) PAg (dB) EIRP Limit Margin (dBm) (dBm) (dB) 2.75 8.98 35.7 23.37 30.00 -6.63 2.85 9.47 35.7 23.67 30.00 -6.33 2.92 9.5 35.7 23.61 30.00 -6.39 Polarization V V V Report No.: CTA24052101817 3.2 Peak-to-Average Ratio (PAR) LIMIT The Peak-to-Average Ratio (PAR) of the transmission may not exceed 13 dB. TEST CONFIGURATION Page 14 of 23 TEST PROCEDURE 1. Refer to instrument's analyzer instruction manual for details on how to use the power statistics/CCDF function; 2. Set resolution/measurement bandwidth signal's occupied bandwidth; 3. Set the number of counts to a value that stabilizes the measured CCDF curve; 4. Set the measurement interval as follows: 1). for continuous transmissions, set to 1 ms, 2). for burst transmissions, employ an external trigger that is synchronized with the EUT burst timing sequence, or use the internal burst trigger with a trigger level that allows the burst to stabilize and set the measurement interval to a time that is less than or equal to the burst duration. 5. Record the maximum PAPR level associated with a probability of 0.1%. TEST RESULTS ------Passed-----Please refer to the appendix test data. Report No.: CTA24052101817 3.3 Occupied Bandwidth and Emission Bandwidth LIMIT N/A TEST CONFIGURATION Page 15 of 23 TEST PROCEDURE The transmitter output was connected to a calibrated coaxial cable and coupler, the other end of which was connected to a spectrum analyzer. The occupied bandwidth was measured with the spectrum analyzer at low, middle and high channel in each band. The -26dBc Emission bandwidth was also measured and recorded. Set RBW was set to about 1% of emission BW, VBW3 times RBW. -26dBc display line was placed on the screen (or 99% bandwidth), the occupied bandwidth is the delta frequency between the two points where the display line intersects the signal trace. TEST RESULTS ------Passed-----Please refer to the appendix test data. Report No.: CTA24052101817 Page 16 of 23 3.4 Band Edge compliance LIMIT According to §27.53 (h): for operations in the 1695-1710 MHz, 1710-1755 MHz, 1755-1780 MHz, 1915-1920 MHz, 1995-2000 MHz, 2000-2020 MHz, 2110-2155 MHz, 2155-2180 MHz, and 21802200 bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB. TEST CONFIGURATION TEST PROCEDURE 1. The transmitter output port was connected to base station. 2. The RF output of EUT was connected to the power meter by RF cable and attenuator, the path loss was compensated to the results for each measurement. 3. Set EUT at maximum power through base station. 4. Select lowest and highest channels for each band and different modulation. 5. Measure Band edge using RMS (Average) detector by spectrum TEST RESULTS ------Passed-----Please refer to the appendix test data. Report No.: CTA24052101817 Page 17 of 23 3.5 Spurious Emission LIMIT According to §27.53 (h): for operations in the 1695-1710 MHz, 1710-1755 MHz, 1755-1780 MHz, 1915-1920 MHz, 1995-2000 MHz, 2000-2020 MHz, 2110-2155 MHz, 2155-2180 MHz, and 21802200 bands, the power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) in watts by at least 43 + 10 log10 (P) dB. TEST CONFIGURATION Conducted Spurious Measurement: Radiated Spurious Measurement: TEST PROCEDURE The EUT was setup according to EIA/TIA 603D Conducted Spurious Measurement: a. Place the EUT on a bench and set it in transmitting mode. b. Connect a low loss RF cable from the antenna port to a spectrum analyzer and CMW500 by a Directional Couple. c. EUT Communicate with CMW500 then selects a channel for testing. d. Add a correction factor to the display of spectrum, and then test. e. The resolution bandwidth of the spectrum analyzer was set sufficient scans were taken to show the out of band Emission if any up to10th harmonic. Report No.: CTA24052101817 Page 18 of 23 Radiated Spurious Measurement: a. The EUT shall be placed at the specified height on a support, and in the position closest to normal use as declared by provider. b. The test antenna shall be oriented initially for vertical polarization and shall be chosen to correspond to the frequency of the transmitter c. The output of the test antenna shall be connected to the measuring receiver. d. The transmitter shall be switched on and the measuring receiver shall be tuned to the frequency of the transmitter under test. e. The test antenna shall be raised and lowered through the specified range of height until a maximum signal level is detected by the measuring receiver. f. The transmitter shall then be rotated through 360°in the horizontal plane, until the maximum signal level is detected by the measuring receiver. g. The test antenna shall be raised and lowered again through the specified range of height until a maximum signal level is detected by the measuring receiver. h. The maximum signal level detected by the measuring receiver shall be noted. i. The transmitter shall be replaced by a substitution antenna. j. The substitution antenna shall be orientated for vertical polarization and the length of the substitution antenna shall be adjusted to correspond to the frequency of the transmitter. k. The substitution antenna shall be connected to a calibrated signal generator. l. If necessary, the input attenuator setting of the measuring receiver shall be adjusted in order to increase the sensitivity of the measuring receiver. m. The test antenna shall be raised and lowered through the specified range of height to ensure that the maximum signal is received. n. The input signal to the substitution antenna shall be adjusted to the level that produces a level detected by the measuring receiver, that is equal to the level noted while the transmitter radiated power was measured, corrected for the change of input attenuator setting of the measuring receiver. o. The measurement shall be repeated with the test antenna and the substitution antenna orientated for horizontal polarization. p. The measure of the effective radiated power is the larger of the two levels recorded at the input to the substitution antenna, corrected for gain of the substitution antenna if necessary. q. The resolution bandwidth of the spectrum analyzer was set at 100 kHz for Part 22 and 1MHz for Part 24. The frequency range was checked up to 10th harmonic. r. Test site anechoic chamber refer to ANSI C63. TEST RESULTS Report No.: CTA24052101817 Conducted Measurement: ------Passed-----Please refer to the appendix test data. Page 19 of 23 Report No.: CTA24052101817 Page 20 of 23 Radiated Measurement: Remark: 1. We were tested all RB Configuration refer 3GPP TS136 521 for each Channel Bandwidth of LTE FDD Band 66; LTE FDD Band 66_Channel Bandwidth 20MHz_QPSK_ Low Channel Frequency PMea (MHz) (dBm) Pcl (dB) Distance (m) Ga Antenna Gain(dB) Peak EIRP (dBm) Limit (dBm) 3440.00 -41.19 4.02 3.00 12.5 -32.71 -13.00 5160.00 -52.61 5.11 3.00 13.38 -44.34 -13.00 3440.00 -40.51 4.02 3.00 12.5 -32.03 -13.00 5160.00 -49.30 5.11 3.00 13.38 -41.03 -13.00 Margin (dB) -19.71 -31.34 -19.03 -28.03 Polarization H H V V Frequency (MHz) 3490.00 5235.00 3490.00 5235.00 LTE FDD Band 66_Channel Bandwidth 20MHz_QPSK_ Middle Channel PMea (dBm) Pcl (dB) Distance (m) Ga Antenna Gain(dB) EIRP (dBm) Limit (dBm) Margin (dB) -46.98 4.02 3.00 12.5 -38.50 -13.00 -25.50 -46.29 5.11 3.00 13.38 -38.02 -13.00 -25.02 -44.99 4.02 3.00 12.5 -36.51 -13.00 -23.51 -52.62 5.11 3.00 13.38 -44.35 -13.00 -31.35 Polarization H H V V LTE FDD Band 66_Channel Bandwidth 20MHz_QPSK_ High Channel Frequency PMea (MHz) (dBm) Pcl (dB) Distance (m) Ga Antenna Gain(dB) EIRP (dBm) Limit (dBm) Margin (dB) 3540.00 -41.80 4.02 3.00 12.5 -33.32 -13.00 -20.32 5310.00 -47.10 5.11 3.00 13.38 -38.83 -13.00 -25.83 3540.00 -43.11 4.02 3.00 12.5 -34.63 -13.00 -21.63 5310.00 -53.87 5.11 3.00 13.38 -45.60 -13.00 -32.60 Notes: 1.All channel bandwidth were tested,the report recorded the worst data. 2. EIRP=PMea(dBm)-Pcl(dB)+PAg(dB)+Ga(dBi) 3. ERP = EIRP 2.15dBi as EIRP by subtracting the gain of the dipole. 4. Margin = EIRP Limit 5. We measured all modes and only recorded the worst case. Polarization H H V V Report No.: CTA24052101817 Page 21 of 23 3.6 Frequency Stability under Temperature & Voltage Variations LIMIT According to §27.54, §2.1055 requirement, the frequency stability shall be sufficient to ensure that the fundamental emissions stay within the authorized bands of operation and should not exceed 2.5ppm. TEST CONFIGURATION TEST PROCEDURE The EUT was setup according to EIA/TIA 603D Frequency Stability under Temperature Variations: In order to measure the carrier frequency under the condition of AFC lock, it is necessary to make measurements with the EUT in a "call mode". This is accomplished with the use of R&S CMW500 DIGITAL RADIO COMMUNICATION TESTER. 1. Measure the carrier frequency at room temperature. 2. Subject the EUT to overnight soak at -30. 3. With the EUT, powered via nominal voltage, connected to the CMW500 and in a simulated call on middle channel for LTE band 4, measure the carrier frequency. These measurements should be made within 2 minutes of Powering up the EUT, to prevent significant self-warming. 4. Repeat the above measurements at 10 increments from -30 to +50. Allow at least 1.5 hours at each temperature, unpowered, before making measurements. 5. Re-measure carrier frequency at room temperature with nominal voltage. Vary supply voltage from minimum voltage to maximum voltage, in 0.1Volt increments re-measuring carrier frequency at each voltage. Pause at nominal voltage for 1.5 hours unpowered, to allow any selfheating to stabilize, before continuing. 6. Subject the EUT to overnight soak at +50. 7. With the EUT, powered via nominal voltage, connected to the CMW500 and in a simulated call on the centre channel, measure the carrier frequency. These measurements should be made within 2 minutes of Powering up the EUT, to prevent significant self-warming. 8. Repeat the above measurements at 10 increments from +50 to -30. Allow at least 1.5 hours at each temperature, unpowered, before making measurements 9. At all temperature levels hold the temperature to +/- 0.5 during the measurement procedure. Frequency Stability under Voltage Variations: Set chamber temperature to 20. Use a variable AC power supply / DC power source to power the EUT and set the voltage to rated voltage. Set the spectrum analyzer RBW low enough to obtain the desired frequency resolution and recorded the frequency. Reduce the input voltage to specify extreme voltage variation (±15%) and endpoint, record the Report No.: CTA24052101817 maximum frequency change. TEST RESULTS ------Passed-----Please refer to the appendix test data. Page 22 of 23 Report No.: CTA24052101817 4 Test Setup Photos of the EUT Page 23 of 23 5 Photos of the EUT Reference to the test report No. CTA24052101801. ********************** End of Report **********************
Related FCC IDs:
- 2BE8S-U100 - Shenzhen kehuitong Technology Co.,Ltd mobile phone [-U100] Microsoft Word 2016 Microsoft Word 2016