ANT Test Report

SHENZHEN AONI ELECTRONIC CO., LTD. ER02201 Smart Battery Doorbell Camera Z63-ER02201 Z63ER02201 er02201

PDF Viewing Options

Not Your Device? Search For Manuals or Datasheets below:


File Info : application/pdf, 14 Pages, 1.53MB

Document DEVICE REPORTGetApplicationAttachment.html?id=7215093
Shenzhen Maya Communication

Equipment Co., LTD

SPECIFICATION FOR APPROVAL

(Product acceptance letter)

product name: Product model (original factory model):

FP C ER 02201

The Customer's Item Name is:
The Customer's "Specification and Model":
Customer's Material Code for all items:

Change Content CV:
Content before the change

1

editio

princeps

Change of the content

Change date
2024.1.6

editi on
A 1

page number

person liable
Feng Guojun

order numbe

Name of the supplier: Shenzhen Maya Communication Equipment Co., LTD

Supplier address: 202,2nd Floor, Building 1, Guanghui Science Park, No.13, Minqing Road, Longhua District, Shenzhen

Contact number: 075536517075

Fax: 0755-82916227

Email: [email protected]

(Signature of the Supplier)

Responsible person / Date

Review / Date

Approval / Date

This admission includes the following: (indispensable) One, the cover 2. Parameters and specifications 3. Structural size diagram 4. BOM outside V. Production process flow table Vi. Certification and test status
Customer Name (Company name): Shenzhen Oni Electronics Co., Ltd
The buyer (customer) determines the result:  qualified  unqualified Demander (customer) recognition (please return the entire recognition bookmark after confirmation)
1

Shenzhen Maya Communication

Equipment Co., LTD

Development & Design Engineer / Date

SQE, Engineer / Date Head of the

Development Manager

Purchasing

approval / date

Department / Date

1

Shenzhen Maya Communication Equipment Co., LTD
catalogue
1. Frequband for customer antenna debugging and design....4 2. Antenna diagram........................................4 3. Electric performance...................................5 3.1 Description of the test method and the data..........5 3.2 Passive Test Report (Passive Test Report).............5 3.3 Activ e Test Report (Active Test Report)..............6 3.4Active OTA TRP / TIS data.............................7 3. 5 The passive direction map .............................7 4. Matching circuit description...........................8 5. Environmental treatment................................9 6. Structural drawings...................................10 7. Sample size inspection report.........................11 8. Certification and test status .......................13
3

Shenzhen Maya Communication Equipment Co., LTD

1. Frequband for customer antenna debugging and design

frequen cy
W IFI

frequency range WIFI :2.4G

2. Antenna diagram

drawing of complete machine

Antenna diagram

4

Shenzhen Maya Communication Equipment Co., LTD
3. Electric performance

3.1 Description of the test method and the data

implementor name

use

Vector Network Analyzer

S 11/Impedance / Passive Test

Agilent 8960 SP 6010
R &S CMU 200

Mobile phone mobile communication equipment test including GSM, GPRS, EDGE, CDMA2000,1 xEV-DO, TD-SCDMA, WCDMA, and HSDPA

R &S CMW 500 MT 8820C
Agilent E 4438C

Containing TD-SCDMA, WCDMA, and
HSDPA, LTE, WIFI, GPS mobile phone mobile communication equipment test
Test for the active GPS

MVG Chamber

Passive Test / OTA active Test / Efficiency /Gain

3.2 Passive Test Report (Passive Test Report)

Test equipment: network analyzer

Test method: use a 50 ohm CABLE cable to export the data from the instrument test port, use the SMA connector of the hand mechanism after the calibration part, and record the data such as echo loss or standing wave ratio corresponding to the relevant frequency point.

5

Shenzhen Maya Communication Equipment Co., LTD
3.3 Active Test Report (Active Test Report) TRP /TIS Test tools: comprehensive tester, network analyzer, full radio far field ETS, The French MVG SG24LT (Satmio) near-field 3D microwave dark chamber, High-precision positioning system and its controller and computer test environment with automatic test program: temperature 22 ± 3, Humidity 60% ± 15% test method: test method and calculation of TRP of system software during the TRP test, The DUT (Device Under Test) is in the maximum transmitting power state, Select high school, low three channels for testing, Controlling the position of the DUT through the positioning system, With 15 degrees as the step length, Measure the effective radiation power (EIRP) at each point in the three-dimensional space, By integrating the average over the sphere, The calculation formula is as follows:
In the TIS test, DUT is in the maximum transmitting power state, and three channels, high and low, are selected for the test. By controlling the position of DUT, measuring the receiving sensitivity of each point in the 3dimensional space, and calculate the average value on the sphere by integrating. The calculation formula is as follows:
6

Shenzhen Maya Communication Equipment Co., LTD
6

Shenzhen Maya Communication Equipment Co., LTD
3.4 Active OTA TRP / TIS data
3.5. The passive direction map
7

Shenzhen Maya Communication Equipment Co., LTD
4. Matching circuit description
Note: Our company has adjusted the matching circuit of the antenna.
8

Shenzhen Maya Communication Equipment Co., LTD
5. Environmental treatment
WIFI Antenna assembly diagram
9

Shenzhen Maya Communication Equipment Co., LTD
6. Structural drawings
10

Shenzhen Maya Communication Equipment Co., LTD

7. Sample size test report

material quality
project name
The number of samples The sample date I. Appearance inspection: Visually inspect the items
1. Dirty surface impurities 2. Gel
3. Waste
4. Rip
5. Gold surface oxidation 6. Ink (black)

FPC antenna
ER 02201 5 PCS
2024.1.6

casual result inspec tion
O K

O K

5PCS

O K

O K

O K

O K

graphic:

Ii. Reliability test (5 PCS):

test item
1. The adhesion test
2. Salt spray test status
3. Wear-resistant test
4. Screen print content

standard
The ink must not fall off
There is no corrosion in gold surface Do not leak the substrate

1
not have not have

2
not have not have

3
not have not have

MY -ER 02201-V 01

4
not have not have

5
not have not have

resul t O K
O K

O K

O K

11

3. Dimension measurement (randomly selected 5 PCS):
Site reference value (mm)
tolerance + (mm)

1

11.7

0.15

2

33.8

0.15

3

30

1.0

4

5

6

common differe nce - (mm)
0.15 0.15 1.0

1
11.67 33.79 30.29

2
11.69 33.81 30.31

3
11.72 33.83 30.34

4
11.73 33.85 30.36

5
11.75 33.86 30.37

detec tio n res ult
O K O K O K

12

Shenzhen Maya Communication Equipment Co., LTD
8. Certification test status (fill in the instructions: if there are relevant test certification, please mark in brackets and indicate the corresponding identification Certificate or report number) () UL certification or report number: () VDE Certification or Report number: () CE Certification or Report number: () FCC Certification or Report number: () R O HS Certification or Report Number: No .NGBML 2105022606 () REACH Certification or report number: No.NGBML 2105023708 () EMC Certification or Report Number: () CCC Certification or Report Number: () SRRC Certification or Report number: () Other certification or report number: () No product certification
13



Related FCC IDs:

Search Any Device: